Re: Error getting attachments from SOAPMessage
Chinmoy, I had to do some more changes in order to make axis2-saaj compatible with the SAAJ specs and Sun's reference implementation. I believe that the issue should be fixed now in trunk. However: * For the DataHandler issue: the code in trunk still creates the AttachmentPart directly from the DataHandler produced by Axiom, i.e. it does not use AttachmentPartImpl#setContent(dh.getInputStream(), dh.getContentType()). The existing code had some troubles to correctly populate the MimeHeader objects which might explain the issue ("Mapping qname not fond for the package: org.apache.axiom.attachments.impl") you have seen. If this still persists, then we need to further investigate. * I didn't understand your comment about Sun's SAAJ implementation expecting the 'type' property in the second position in the 'Content-Type' string. Therefore I didn't implement any specific change related to this. Can you explain this issue a bit more? As usual, a new snapshot with the changes should be available within the next 24hrs. Regards, Andreas On Thu, Jan 8, 2009 at 09:17, Chinmoy Chakraborty wrote: > Andreas, > > I tried MessageFactoryTest and all the tests passed. I have following notes > for the test: > > 1. For sun SAAJ implementation, I noticed 'type' property should be in the > second position in the 'Content-Type' string. > 2. Old saaj-impl.jar fails MTOM test because old saaj did not implement MTOM > feature. I had to use jdk 1.6 to test MTOM feature. Hence I had to change > sun SAAJ messagefactory namespace > (com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl()) > in SAAJTestUtil. > > Following is the stack trace for the issue I am getting forI > AttachmentPartImpl#setDataHandler > > org.apache.axis2.AxisFault: Mapping qname not fond for the package: > org.apache.axiom.attachments.impl > at > org.apache.axis2.databinding.utils.BeanUtil.getPullParser(BeanUtil.java:305) > at org.apache.axis2.rpc.receivers.RPCUtil.processResponse(RPCUtil.java:97) > at > org.apache.axis2.rpc.receivers.RPCUtil.processResponseAsDocLitWrapped(RPCUtil.java:437) > at > org.apache.axis2.rpc.receivers.RPCMessageReceiver.invokeBusinessLogic(RPCMessageReceiver.java:138) > at > org.apache.axis2.receivers.AbstractInOutMessageReceiver.invokeBusinessLogic(AbstractInOutMessageReceiver.java:40) > at > org.apache.axis2.receivers.AbstractMessageReceiver.receive(AbstractMessageReceiver.java:100) > at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:176) > at > org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostRequest(HTTPTransportUtils.java:275) > at org.apache.axis2.transport.http.AxisServlet.doPost(AxisServlet.java:131) > > Please find attached modified files. > > Chinmoy > > > On Thu, Jan 8, 2009 at 4:12 AM, Andreas Veithen > wrote: >> >> See my comments inline. >> >> I also committed my test cases to axis2-saaj (see MessageFactoryTest). >> Obviously, since they don't pass yet, there are commented out. Can you >> uncomment them and check your modifications against them? >> >> Andreas >> >> On Mon, Jan 5, 2009 at 07:43, Chinmoy Chakraborty >> wrote: >> > Andreas, >> > >> > As you mentioned about the SAAJ spec, I removed the code for setting >> > SOAPPart content-id in SOAPPartImpl. I also modified the code in >> > SOAPMessageImpl. >> >> Your code should set the contentId property, but it should add the >> angle brackets. >> >> > Now, if I do AttachmentPartImpl#setDataHandler I get this error: >> > >> > org.apache.axis2.AxisFault: Mapping qname not fond for the package: >> > org.apache.axiom.attachments.impl >> >> Strange. Can you post the full stack trace? >> >> > So I did, AttachmentPartImpl#setContent(dh.getInputStream(), >> > dh.getContentType()); >> > >> > Is anything wrong in the above code? >> >> I think that it unnecessarily copies data around. >> >> > Please find modified two files. >> > >> > One more thing, in the client side when I am retrieving the datahandler, >> > it >> > loses the "Content-Type" and DataHnadler#getName becomes >> > "ByteArrayDataSource". The content-type becomes >> > application/octet-stream. >> > Please tell me how to preserve the content-type and getName information >> > of >> > DataHandler in the client side? >> >> I don't think that one can expect that the getName information be >> preserved (where would this information be stored in the message?). >> Obviously the content type should be preserved. I will have to >> investigate this. >> >> > Chinmoy >> > >> > On Mon, Jan 5, 2009 at 4:05 AM, Andreas Veithen >> > >> > wrote: >> >> >> >> Chinmoy, >> >> >> >> I've started to write some unit tests that compare the behavior of >> >> createMessage in Axis2's SAAJ implementation (including your proposed >> >> changes) with Sun's reference implementation. One issue I see is >> >> related to the way the contentId property is set on SOAPPart and >> >> AttachmentPart. The SAAJ spec describes the behavior of getContentId >> >> as follows: >> >> >> >> [quote] G
Re: Error getting attachments from SOAPMessage
See my comments inline. I also committed my test cases to axis2-saaj (see MessageFactoryTest). Obviously, since they don't pass yet, there are commented out. Can you uncomment them and check your modifications against them? Andreas On Mon, Jan 5, 2009 at 07:43, Chinmoy Chakraborty wrote: > Andreas, > > As you mentioned about the SAAJ spec, I removed the code for setting > SOAPPart content-id in SOAPPartImpl. I also modified the code in > SOAPMessageImpl. Your code should set the contentId property, but it should add the angle brackets. > Now, if I do AttachmentPartImpl#setDataHandler I get this error: > > org.apache.axis2.AxisFault: Mapping qname not fond for the package: > org.apache.axiom.attachments.impl Strange. Can you post the full stack trace? > So I did, AttachmentPartImpl#setContent(dh.getInputStream(), > dh.getContentType()); > > Is anything wrong in the above code? I think that it unnecessarily copies data around. > Please find modified two files. > > One more thing, in the client side when I am retrieving the datahandler, it > loses the "Content-Type" and DataHnadler#getName becomes > "ByteArrayDataSource". The content-type becomes application/octet-stream. > Please tell me how to preserve the content-type and getName information of > DataHandler in the client side? I don't think that one can expect that the getName information be preserved (where would this information be stored in the message?). Obviously the content type should be preserved. I will have to investigate this. > Chinmoy > > On Mon, Jan 5, 2009 at 4:05 AM, Andreas Veithen > wrote: >> >> Chinmoy, >> >> I've started to write some unit tests that compare the behavior of >> createMessage in Axis2's SAAJ implementation (including your proposed >> changes) with Sun's reference implementation. One issue I see is >> related to the way the contentId property is set on SOAPPart and >> AttachmentPart. The SAAJ spec describes the behavior of getContentId >> as follows: >> >> [quote] Gets the value of the MIME header whose name is "Content-Id". >> [/quote] >> >> This means that it should return the content ID enclosed in angle >> brackets (which is the behavior of Sun's implementation). Since your >> code fetches the content ID from Axiom and Axiom stores the bare >> content ID (i.e. strips the angle brackets), this requirement is not >> satisfied. >> >> Also, I was wondering why your code uses AttachmentPartImpl#setContent >> and not just AttachmentPartImpl#setDataHandler. Is there any >> particular reason? >> >> Andreas >> >> On Fri, Jan 2, 2009 at 07:15, Chinmoy Chakraborty >> wrote: >> > Hi Andreas, >> > >> > Now I removed the duplicate code from SOAPMessageImpl. I also added one >> > line >> > (line no. 147) to set the content id of SOAPPart. Please find attached >> > two >> > modified java file. >> > >> > Chinmoy >> > >> > >> > >> > On Fri, Jan 2, 2009 at 9:48 AM, Chinmoy Chakraborty >> > wrote: >> >> >> >> Hi Andreas, >> >> >> >> Yes, the code for extracting rootcontent-id is duplicate code. The code >> >> can be put in a protected method in SOAPPartImpl.I had to do that >> >> because, >> >> in Attachments SOAPPart comes also as attachment. It requires to >> >> discard >> >> SOAPPart attachment from the attachment map while adding the >> >> attachments in >> >> SOAPMessage.. >> >> >> >> In the attachment map, the content-ids are stored as key and >> >> datahandler >> >> as the value. I am adding the attachments in SOAPMessage if it is not >> >> SOAPPart. For that I needed the rootcontentid i.e. the id for the >> >> SOAPPart. >> >> I am extrracting that id from "Content-Type" string. So it can include >> >> '<', >> >> '>', and "cid:". >> >> >> >> >> >> Chinmoy >> >> >> >> >> >> On Thu, Jan 1, 2009 at 8:42 PM, Andreas Veithen >> >> wrote: >> >>> >> >>> Chinmoy, >> >>> >> >>> The code you added in SOAPMessageImpl to some extent duplicates the >> >>> code in Attachments#getSOAPPartContentID. Is there a particular reason >> >>> for this? >> >>> >> >>> Andreas >> >>> >> >>> On Wed, Dec 31, 2008 at 14:59, Chinmoy Chakraborty >> >>> wrote: >> >>> > Hi Andreas, >> >>> > >> >>> > I walked through the code (org.apache.axis2.saaj.SOAPMessageImpl) >> >>> > and >> >>> > fixed >> >>> > the attachment issue. I have added some code from line no. 111 to >> >>> > 149 >> >>> > of >> >>> > attached org.apache.axis2.saaj.SOAPMessageImpl class that fixes the >> >>> > attachemnt issue while creating SOAP with attachment from >> >>> > inputstream. >> >>> > >> >>> > I also have added a protected method in >> >>> > org.apache.axis2.saaj.SOAPPartImpl >> >>> > class. The code code is: >> >>> > >> >>> > protected Map getAttachmentMap(){ >> >>> > if(attachments != null){ >> >>> > return attachments.getMap(); >> >>> > } >> >>> > return null; >> >>> > } >> >>> > >> >>> > I have also declared a private variable in SOAPPartImpl: private >> >>> > Attachments >> >>> > attachments = null; >> >>> > >> >>> > I am atta
Re: Error getting attachments from SOAPMessage
Chinmoy, I've started to write some unit tests that compare the behavior of createMessage in Axis2's SAAJ implementation (including your proposed changes) with Sun's reference implementation. One issue I see is related to the way the contentId property is set on SOAPPart and AttachmentPart. The SAAJ spec describes the behavior of getContentId as follows: [quote] Gets the value of the MIME header whose name is "Content-Id". [/quote] This means that it should return the content ID enclosed in angle brackets (which is the behavior of Sun's implementation). Since your code fetches the content ID from Axiom and Axiom stores the bare content ID (i.e. strips the angle brackets), this requirement is not satisfied. Also, I was wondering why your code uses AttachmentPartImpl#setContent and not just AttachmentPartImpl#setDataHandler. Is there any particular reason? Andreas On Fri, Jan 2, 2009 at 07:15, Chinmoy Chakraborty wrote: > Hi Andreas, > > Now I removed the duplicate code from SOAPMessageImpl. I also added one line > (line no. 147) to set the content id of SOAPPart. Please find attached two > modified java file. > > Chinmoy > > > > On Fri, Jan 2, 2009 at 9:48 AM, Chinmoy Chakraborty > wrote: >> >> Hi Andreas, >> >> Yes, the code for extracting rootcontent-id is duplicate code. The code >> can be put in a protected method in SOAPPartImpl.I had to do that because, >> in Attachments SOAPPart comes also as attachment. It requires to discard >> SOAPPart attachment from the attachment map while adding the attachments in >> SOAPMessage.. >> >> In the attachment map, the content-ids are stored as key and datahandler >> as the value. I am adding the attachments in SOAPMessage if it is not >> SOAPPart. For that I needed the rootcontentid i.e. the id for the SOAPPart. >> I am extrracting that id from "Content-Type" string. So it can include '<', >> '>', and "cid:". >> >> >> Chinmoy >> >> >> On Thu, Jan 1, 2009 at 8:42 PM, Andreas Veithen >> wrote: >>> >>> Chinmoy, >>> >>> The code you added in SOAPMessageImpl to some extent duplicates the >>> code in Attachments#getSOAPPartContentID. Is there a particular reason >>> for this? >>> >>> Andreas >>> >>> On Wed, Dec 31, 2008 at 14:59, Chinmoy Chakraborty >>> wrote: >>> > Hi Andreas, >>> > >>> > I walked through the code (org.apache.axis2.saaj.SOAPMessageImpl) and >>> > fixed >>> > the attachment issue. I have added some code from line no. 111 to 149 >>> > of >>> > attached org.apache.axis2.saaj.SOAPMessageImpl class that fixes the >>> > attachemnt issue while creating SOAP with attachment from inputstream. >>> > >>> > I also have added a protected method in >>> > org.apache.axis2.saaj.SOAPPartImpl >>> > class. The code code is: >>> > >>> > protected Map getAttachmentMap(){ >>> > if(attachments != null){ >>> > return attachments.getMap(); >>> > } >>> > return null; >>> > } >>> > >>> > I have also declared a private variable in SOAPPartImpl: private >>> > Attachments >>> > attachments = null; >>> > >>> > I am attaching these files along with this mail. The modified code >>> > works >>> > fine for me now while creating SOAP with attachments from inputstream. >>> > >>> > If you find the changes fine please commit. I can download fresh >>> > axis-saaj-SNAPSHOT jar. Please give your opinion. >>> > >>> > Chinmoy >>> > >>> > >>> > >>> > On Tue, Dec 23, 2008 at 9:15 PM, Andreas Veithen >>> > >>> > wrote: >>> >> >>> >> On Tue, Dec 23, 2008 at 12:17, Chinmoy Chakraborty >>> >> wrote: >>> >> > Andreas, >>> >> > >>> >> > I am stuck with the attachments. I have sent many mails in this >>> >> > forum >>> >> > mentioning the issue regarding creation of SOAPMessage with >>> >> > attachments >>> >> > from >>> >> > Inputstream but no one replied me back. >>> >> > >>> >> > Previously you have mentioned that asix saaj api has been moved to >>> >> > gerenimo. >>> >> > Could you please send me the url from where I can get the geronimo >>> >> > SNAPSHOT >>> >> > jar? >>> >> >>> >> The SAAJ API version used by Axis2 can be found at [1]. Note that >>> >> there are currently no snapshots, because as an API it is not under >>> >> active development (it is just the translation into Java code of a >>> >> specification, so it's fairly static). >>> >> >>> >> [1] >>> >> >>> >> http://repo1.maven.org/maven2/org/apache/geronimo/specs/geronimo-saaj_1.3_spec/1.0.1/ >>> >> >>> >> > Could you send me the email-id of the developer who is working on >>> >> > axis-saaj >>> >> > implementation by which I can contact him directly. I am really >>> >> > really >>> >> > stuck >>> >> > here with my latest project. This is urgent for me. Please help. >>> >> >>> >> I think that the SAAJ implementation is the work of several people. It >>> >> has been around for some time, so I don't know exactly who is the most >>> >> familiar with the code. You may have a look at [2] to see who worked >>> >> on it. The corresponding email addresses can be found at [3]. >>> >> >>> >> [2] >>
Re: Error getting attachments from SOAPMessage
Hi Andreas, Yes, the code for extracting rootcontent-id is duplicate code. The code can be put in a protected method in SOAPPartImpl.I had to do that because, in Attachments SOAPPart comes also as attachment. It requires to discard SOAPPart attachment from the attachment map while adding the attachments in SOAPMessage.. In the attachment map, the content-ids are stored as key and datahandler as the value. I am adding the attachments in SOAPMessage if it is not SOAPPart. For that I needed the rootcontentid i.e. the id for the SOAPPart. I am extrracting that id from "Content-Type" string. So it can include '<', '>', and "cid:". Chinmoy On Thu, Jan 1, 2009 at 8:42 PM, Andreas Veithen wrote: > Chinmoy, > > The code you added in SOAPMessageImpl to some extent duplicates the > code in Attachments#getSOAPPartContentID. Is there a particular reason > for this? > > Andreas > > On Wed, Dec 31, 2008 at 14:59, Chinmoy Chakraborty > wrote: > > Hi Andreas, > > > > I walked through the code (org.apache.axis2.saaj.SOAPMessageImpl) and > fixed > > the attachment issue. I have added some code from line no. 111 to 149 of > > attached org.apache.axis2.saaj.SOAPMessageImpl class that fixes the > > attachemnt issue while creating SOAP with attachment from inputstream. > > > > I also have added a protected method in > org.apache.axis2.saaj.SOAPPartImpl > > class. The code code is: > > > > protected Map getAttachmentMap(){ > > if(attachments != null){ > > return attachments.getMap(); > > } > > return null; > > } > > > > I have also declared a private variable in SOAPPartImpl: private > Attachments > > attachments = null; > > > > I am attaching these files along with this mail. The modified code works > > fine for me now while creating SOAP with attachments from inputstream. > > > > If you find the changes fine please commit. I can download fresh > > axis-saaj-SNAPSHOT jar. Please give your opinion. > > > > Chinmoy > > > > > > > > On Tue, Dec 23, 2008 at 9:15 PM, Andreas Veithen < > andreas.veit...@gmail.com> > > wrote: > >> > >> On Tue, Dec 23, 2008 at 12:17, Chinmoy Chakraborty > >> wrote: > >> > Andreas, > >> > > >> > I am stuck with the attachments. I have sent many mails in this forum > >> > mentioning the issue regarding creation of SOAPMessage with > attachments > >> > from > >> > Inputstream but no one replied me back. > >> > > >> > Previously you have mentioned that asix saaj api has been moved to > >> > gerenimo. > >> > Could you please send me the url from where I can get the geronimo > >> > SNAPSHOT > >> > jar? > >> > >> The SAAJ API version used by Axis2 can be found at [1]. Note that > >> there are currently no snapshots, because as an API it is not under > >> active development (it is just the translation into Java code of a > >> specification, so it's fairly static). > >> > >> [1] > >> > http://repo1.maven.org/maven2/org/apache/geronimo/specs/geronimo-saaj_1.3_spec/1.0.1/ > >> > >> > Could you send me the email-id of the developer who is working on > >> > axis-saaj > >> > implementation by which I can contact him directly. I am really really > >> > stuck > >> > here with my latest project. This is urgent for me. Please help. > >> > >> I think that the SAAJ implementation is the work of several people. It > >> has been around for some time, so I don't know exactly who is the most > >> familiar with the code. You may have a look at [2] to see who worked > >> on it. The corresponding email addresses can be found at [3]. > >> > >> [2] > >> > http://svnsearch.org/svnsearch/repos/ASF/search?path=%2Fwebservices%2Faxis2%2Ftrunk%2Fjava%2Fmodules%2Fsaaj > >> [3] http://ws.apache.org/axis2/team-list.html > >> > >> > > >> > Chinmoy > >> > > >> > > >> > > >> > On Thu, Dec 18, 2008 at 8:54 PM, Andreas Veithen > >> > > >> > wrote: > >> >> > >> >> Chinmoy, > >> >> > >> >> I walked through the axis2-saaj code and indeed when creating a > >> >> message from an input stream using MessageFactory, axis2-saaj doesn't > >> >> even request the attachments from Axiom. However, I'm not familiar > >> >> enough with the code to be able to fix this myself. > >> >> > >> >> Maybe somebody else can help here? > >> >> > >> >> Andreas > >> >> > >> >> On Thu, Dec 18, 2008 at 13:05, Chinmoy Chakraborty > > >> >> wrote: > >> >> > Andreas, > >> >> > > >> >> > Please find attached attachment.xml which I am using as inputstream > >> >> > to > >> >> > create SOAPMessage. The MIME boundary in my previous code snippet > may > >> >> > differ > >> >> > since it is generated at runtime but this is the file generated by > >> >> > another > >> >> > system. I am also sending you the code that generates the attached > >> >> > file. > >> >> > > >> >> > SOAPMessage soapMsg = MessageFactory.newInstance().createMessage(); > >> >> > //setting the namespace declaration. > >> >> > SOAPPart sp = soapMsg.getSOAPPart(); > >> >> > SOAPEnvelope se = sp.getEnvelope(); > >> >> > se.addNa
Re: Error getting attachments from SOAPMessage
Chinmoy, The code you added in SOAPMessageImpl to some extent duplicates the code in Attachments#getSOAPPartContentID. Is there a particular reason for this? Andreas On Wed, Dec 31, 2008 at 14:59, Chinmoy Chakraborty wrote: > Hi Andreas, > > I walked through the code (org.apache.axis2.saaj.SOAPMessageImpl) and fixed > the attachment issue. I have added some code from line no. 111 to 149 of > attached org.apache.axis2.saaj.SOAPMessageImpl class that fixes the > attachemnt issue while creating SOAP with attachment from inputstream. > > I also have added a protected method in org.apache.axis2.saaj.SOAPPartImpl > class. The code code is: > > protected Map getAttachmentMap(){ > if(attachments != null){ > return attachments.getMap(); > } > return null; > } > > I have also declared a private variable in SOAPPartImpl: private Attachments > attachments = null; > > I am attaching these files along with this mail. The modified code works > fine for me now while creating SOAP with attachments from inputstream. > > If you find the changes fine please commit. I can download fresh > axis-saaj-SNAPSHOT jar. Please give your opinion. > > Chinmoy > > > > On Tue, Dec 23, 2008 at 9:15 PM, Andreas Veithen > wrote: >> >> On Tue, Dec 23, 2008 at 12:17, Chinmoy Chakraborty >> wrote: >> > Andreas, >> > >> > I am stuck with the attachments. I have sent many mails in this forum >> > mentioning the issue regarding creation of SOAPMessage with attachments >> > from >> > Inputstream but no one replied me back. >> > >> > Previously you have mentioned that asix saaj api has been moved to >> > gerenimo. >> > Could you please send me the url from where I can get the geronimo >> > SNAPSHOT >> > jar? >> >> The SAAJ API version used by Axis2 can be found at [1]. Note that >> there are currently no snapshots, because as an API it is not under >> active development (it is just the translation into Java code of a >> specification, so it's fairly static). >> >> [1] >> http://repo1.maven.org/maven2/org/apache/geronimo/specs/geronimo-saaj_1.3_spec/1.0.1/ >> >> > Could you send me the email-id of the developer who is working on >> > axis-saaj >> > implementation by which I can contact him directly. I am really really >> > stuck >> > here with my latest project. This is urgent for me. Please help. >> >> I think that the SAAJ implementation is the work of several people. It >> has been around for some time, so I don't know exactly who is the most >> familiar with the code. You may have a look at [2] to see who worked >> on it. The corresponding email addresses can be found at [3]. >> >> [2] >> http://svnsearch.org/svnsearch/repos/ASF/search?path=%2Fwebservices%2Faxis2%2Ftrunk%2Fjava%2Fmodules%2Fsaaj >> [3] http://ws.apache.org/axis2/team-list.html >> >> > >> > Chinmoy >> > >> > >> > >> > On Thu, Dec 18, 2008 at 8:54 PM, Andreas Veithen >> > >> > wrote: >> >> >> >> Chinmoy, >> >> >> >> I walked through the axis2-saaj code and indeed when creating a >> >> message from an input stream using MessageFactory, axis2-saaj doesn't >> >> even request the attachments from Axiom. However, I'm not familiar >> >> enough with the code to be able to fix this myself. >> >> >> >> Maybe somebody else can help here? >> >> >> >> Andreas >> >> >> >> On Thu, Dec 18, 2008 at 13:05, Chinmoy Chakraborty >> >> wrote: >> >> > Andreas, >> >> > >> >> > Please find attached attachment.xml which I am using as inputstream >> >> > to >> >> > create SOAPMessage. The MIME boundary in my previous code snippet may >> >> > differ >> >> > since it is generated at runtime but this is the file generated by >> >> > another >> >> > system. I am also sending you the code that generates the attached >> >> > file. >> >> > >> >> > SOAPMessage soapMsg = MessageFactory.newInstance().createMessage(); >> >> > //setting the namespace declaration. >> >> > SOAPPart sp = soapMsg.getSOAPPart(); >> >> > SOAPEnvelope se = sp.getEnvelope(); >> >> > se.addNamespaceDeclaration("lw", >> >> > "http://www.abc.com/xml/soap/";); >> >> > soapMsg.setProperty(soapMsg.CHARACTER_SET_ENCODING, >> >> > "UTF-8"); >> >> > soapMsg.setProperty(soapMsg.WRITE_XML_DECLARATION, "true"); >> >> > //setting the soap header. >> >> > SOAPHeader soapHeader = soapMsg.getSOAPHeader(); >> >> > //setting the session id >> >> > SOAPElement soapHeaderElement1 = >> >> > soapHeader.addChildElement("session", "lw", >> >> > "http://www.abc.com/xml/soap/";); >> >> > >> >> > soapHeaderElement1.addTextNode("8e0b383911e3942c87fda0be8ae1879b"); >> >> > //setting the transactionId >> >> > SOAPElement soapHeaderElement2 = >> >> > soapHeader.addChildElement("transactionId", "lw", >> >> > "http://www.abc.com/xml/soap/";); >> >> > soapHeaderElement2.addTextNode(String.valueOf("2")); >> >> > //setting the serverId >> >> > SOAPElement soapHeaderElement3 = >> >> > s
Re: Error getting attachments from SOAPMessage
On Tue, Dec 23, 2008 at 12:17, Chinmoy Chakraborty wrote: > Andreas, > > I am stuck with the attachments. I have sent many mails in this forum > mentioning the issue regarding creation of SOAPMessage with attachments from > Inputstream but no one replied me back. > > Previously you have mentioned that asix saaj api has been moved to gerenimo. > Could you please send me the url from where I can get the geronimo SNAPSHOT > jar? The SAAJ API version used by Axis2 can be found at [1]. Note that there are currently no snapshots, because as an API it is not under active development (it is just the translation into Java code of a specification, so it's fairly static). [1] http://repo1.maven.org/maven2/org/apache/geronimo/specs/geronimo-saaj_1.3_spec/1.0.1/ > Could you send me the email-id of the developer who is working on axis-saaj > implementation by which I can contact him directly. I am really really stuck > here with my latest project. This is urgent for me. Please help. I think that the SAAJ implementation is the work of several people. It has been around for some time, so I don't know exactly who is the most familiar with the code. You may have a look at [2] to see who worked on it. The corresponding email addresses can be found at [3]. [2] http://svnsearch.org/svnsearch/repos/ASF/search?path=%2Fwebservices%2Faxis2%2Ftrunk%2Fjava%2Fmodules%2Fsaaj [3] http://ws.apache.org/axis2/team-list.html > > Chinmoy > > > > On Thu, Dec 18, 2008 at 8:54 PM, Andreas Veithen > wrote: >> >> Chinmoy, >> >> I walked through the axis2-saaj code and indeed when creating a >> message from an input stream using MessageFactory, axis2-saaj doesn't >> even request the attachments from Axiom. However, I'm not familiar >> enough with the code to be able to fix this myself. >> >> Maybe somebody else can help here? >> >> Andreas >> >> On Thu, Dec 18, 2008 at 13:05, Chinmoy Chakraborty >> wrote: >> > Andreas, >> > >> > Please find attached attachment.xml which I am using as inputstream to >> > create SOAPMessage. The MIME boundary in my previous code snippet may >> > differ >> > since it is generated at runtime but this is the file generated by >> > another >> > system. I am also sending you the code that generates the attached file. >> > >> > SOAPMessage soapMsg = MessageFactory.newInstance().createMessage(); >> > //setting the namespace declaration. >> > SOAPPart sp = soapMsg.getSOAPPart(); >> > SOAPEnvelope se = sp.getEnvelope(); >> > se.addNamespaceDeclaration("lw", >> > "http://www.abc.com/xml/soap/";); >> > soapMsg.setProperty(soapMsg.CHARACTER_SET_ENCODING, "UTF-8"); >> > soapMsg.setProperty(soapMsg.WRITE_XML_DECLARATION, "true"); >> > //setting the soap header. >> > SOAPHeader soapHeader = soapMsg.getSOAPHeader(); >> > //setting the session id >> > SOAPElement soapHeaderElement1 = >> > soapHeader.addChildElement("session", "lw", >> > "http://www.abc.com/xml/soap/";); >> > >> > soapHeaderElement1.addTextNode("8e0b383911e3942c87fda0be8ae1879b"); >> > //setting the transactionId >> > SOAPElement soapHeaderElement2 = >> > soapHeader.addChildElement("transactionId", "lw", >> > "http://www.abc.com/xml/soap/";); >> > soapHeaderElement2.addTextNode(String.valueOf("2")); >> > //setting the serverId >> > SOAPElement soapHeaderElement3 = >> > soapHeader.addChildElement("serverId", "lw", >> > "http://www.abc.com/xml/soap/";); >> > >> > >> > soapHeaderElement3.addTextNode(String.valueOf("192.168.1.66_d7618e5711e394247a7da0be8ae08921")); >> > SOAPBody soapBody = soapMsg.getSOAPBody(); >> > SOAPElement callElement = soapBody.addChildElement("call", >> > "lw", >> > "http://www.abc.com/xml/soap/";); >> > SOAPElement msgObjectId = >> > callElement.addChildElement("objectId"); >> > msgObjectId.addTextNode("system"); >> > SOAPElement msgMethod = callElement.addChildElement("method"); >> > msgMethod.addTextNode("setRetVal"); >> > SOAPElement paramElement = >> > callElement.addChildElement("param"); >> > SOAPElement valueElement = >> > paramElement.addChildElement("value"); >> > valueElement.addTextNode("attachment.txt"); >> > DataHandler dh = new DataHandler(new >> > FileDataSource("C:\\Documents >> > and Settings\\lab\\Desktop\\car.txt")); >> > AttachmentPart ap = soapMsg.createAttachmentPart(); >> > ap.setContentId("attachment.txt"); >> > ap.setContent(dh.getContent(), dh.getContentType()); >> > soapMsg.addAttachmentPart(ap); >> > >> > OutputStream out = null; >> > try { >> > out = socket.getOutputStream(); >> > out.write(0x02); >> > soapMsg.writeTo(out); >> > out.write(0x03); >> > out.flush(); >> > } catch (Exception e) { >> > getLog().error("Exception sending the soap " + e, e); >> > } finally
Re: Error getting attachments from SOAPMessage
Andreas, I am stuck with the attachments. I have sent many mails in this forum mentioning the issue regarding creation of SOAPMessage with attachments from Inputstream but no one replied me back. Previously you have mentioned that asix saaj api has been moved to gerenimo. Could you please send me the url from where I can get the geronimo SNAPSHOT jar? Could you send me the email-id of the developer who is working on axis-saaj implementation by which I can contact him directly. I am really really stuck here with my latest project. This is urgent for me. Please help. Chinmoy On Thu, Dec 18, 2008 at 8:54 PM, Andreas Veithen wrote: > Chinmoy, > > I walked through the axis2-saaj code and indeed when creating a > message from an input stream using MessageFactory, axis2-saaj doesn't > even request the attachments from Axiom. However, I'm not familiar > enough with the code to be able to fix this myself. > > Maybe somebody else can help here? > > Andreas > > On Thu, Dec 18, 2008 at 13:05, Chinmoy Chakraborty > wrote: > > Andreas, > > > > Please find attached attachment.xml which I am using as inputstream to > > create SOAPMessage. The MIME boundary in my previous code snippet may > differ > > since it is generated at runtime but this is the file generated by > another > > system. I am also sending you the code that generates the attached file. > > > > SOAPMessage soapMsg = MessageFactory.newInstance().createMessage(); > > //setting the namespace declaration. > > SOAPPart sp = soapMsg.getSOAPPart(); > > SOAPEnvelope se = sp.getEnvelope(); > > se.addNamespaceDeclaration("lw", "http://www.abc.com/xml/soap/ > "); > > soapMsg.setProperty(soapMsg.CHARACTER_SET_ENCODING, "UTF-8"); > > soapMsg.setProperty(soapMsg.WRITE_XML_DECLARATION, "true"); > > //setting the soap header. > > SOAPHeader soapHeader = soapMsg.getSOAPHeader(); > > //setting the session id > > SOAPElement soapHeaderElement1 = > > soapHeader.addChildElement("session", "lw", " > http://www.abc.com/xml/soap/";); > > > > soapHeaderElement1.addTextNode("8e0b383911e3942c87fda0be8ae1879b"); > > //setting the transactionId > > SOAPElement soapHeaderElement2 = > > soapHeader.addChildElement("transactionId", "lw", > > "http://www.abc.com/xml/soap/";); > > soapHeaderElement2.addTextNode(String.valueOf("2")); > > //setting the serverId > > SOAPElement soapHeaderElement3 = > > soapHeader.addChildElement("serverId", "lw", > > "http://www.abc.com/xml/soap/";); > > > > > soapHeaderElement3.addTextNode(String.valueOf("192.168.1.66_d7618e5711e394247a7da0be8ae08921")); > > SOAPBody soapBody = soapMsg.getSOAPBody(); > > SOAPElement callElement = soapBody.addChildElement("call", > "lw", > > "http://www.abc.com/xml/soap/";); > > SOAPElement msgObjectId = > callElement.addChildElement("objectId"); > > msgObjectId.addTextNode("system"); > > SOAPElement msgMethod = callElement.addChildElement("method"); > > msgMethod.addTextNode("setRetVal"); > > SOAPElement paramElement = > callElement.addChildElement("param"); > > SOAPElement valueElement = > paramElement.addChildElement("value"); > > valueElement.addTextNode("attachment.txt"); > > DataHandler dh = new DataHandler(new > FileDataSource("C:\\Documents > > and Settings\\lab\\Desktop\\car.txt")); > > AttachmentPart ap = soapMsg.createAttachmentPart(); > > ap.setContentId("attachment.txt"); > > ap.setContent(dh.getContent(), dh.getContentType()); > > soapMsg.addAttachmentPart(ap); > > > > OutputStream out = null; > > try { > > out = socket.getOutputStream(); > > out.write(0x02); > > soapMsg.writeTo(out); > > out.write(0x03); > > out.flush(); > > } catch (Exception e) { > > getLog().error("Exception sending the soap " + e, e); > > } finally { > > // if (out == null) out.close(); > > } > > > > > > Chinmoy > > > > On Thu, Dec 18, 2008 at 5:21 PM, Andreas Veithen < > andreas.veit...@gmail.com> > > wrote: > >> > >> Chinmoy, > >> > >> Can you also attach a sample message that you try to read with this > code? > >> > >> Andreas > >> > >> On Thu, Dec 18, 2008 at 06:23, Chinmoy Chakraborty > >> wrote: > >> > Andreas, > >> > > >> > Here is my code snippet. > >> > > >> > String contentType = multipart/related; > >> > boundary=MIMEBoundaryurn_uuid_D988AB74BC9802BDC21229577126047; > >> > type="text/xml"; > >> > > >> > start="<0.urn:uuid:d988ab74bc9802bdc21229577126...@apache.org<0.urn%3auuid%3ad988ab74bc9802bdc21229577126...@apache.org> > >" > >> > > >> > MimeHeaders mimeHeaders = new MimeHeaders(); > >> > mimeHeaders.addHeader("Content-Type", contentType); > >> > // Create the SOAP Message using mimeHeader and inputStream > >> > MessageFactory mf = MessageFactory.newInstance();
Re: Error getting attachments from SOAPMessage
Chinmoy, I walked through the axis2-saaj code and indeed when creating a message from an input stream using MessageFactory, axis2-saaj doesn't even request the attachments from Axiom. However, I'm not familiar enough with the code to be able to fix this myself. Maybe somebody else can help here? Andreas On Thu, Dec 18, 2008 at 13:05, Chinmoy Chakraborty wrote: > Andreas, > > Please find attached attachment.xml which I am using as inputstream to > create SOAPMessage. The MIME boundary in my previous code snippet may differ > since it is generated at runtime but this is the file generated by another > system. I am also sending you the code that generates the attached file. > > SOAPMessage soapMsg = MessageFactory.newInstance().createMessage(); > //setting the namespace declaration. > SOAPPart sp = soapMsg.getSOAPPart(); > SOAPEnvelope se = sp.getEnvelope(); > se.addNamespaceDeclaration("lw", "http://www.abc.com/xml/soap/";); > soapMsg.setProperty(soapMsg.CHARACTER_SET_ENCODING, "UTF-8"); > soapMsg.setProperty(soapMsg.WRITE_XML_DECLARATION, "true"); > //setting the soap header. > SOAPHeader soapHeader = soapMsg.getSOAPHeader(); > //setting the session id > SOAPElement soapHeaderElement1 = > soapHeader.addChildElement("session", "lw", "http://www.abc.com/xml/soap/";); > > soapHeaderElement1.addTextNode("8e0b383911e3942c87fda0be8ae1879b"); > //setting the transactionId > SOAPElement soapHeaderElement2 = > soapHeader.addChildElement("transactionId", "lw", > "http://www.abc.com/xml/soap/";); > soapHeaderElement2.addTextNode(String.valueOf("2")); > //setting the serverId > SOAPElement soapHeaderElement3 = > soapHeader.addChildElement("serverId", "lw", > "http://www.abc.com/xml/soap/";); > > soapHeaderElement3.addTextNode(String.valueOf("192.168.1.66_d7618e5711e394247a7da0be8ae08921")); > SOAPBody soapBody = soapMsg.getSOAPBody(); > SOAPElement callElement = soapBody.addChildElement("call", "lw", > "http://www.abc.com/xml/soap/";); > SOAPElement msgObjectId = callElement.addChildElement("objectId"); > msgObjectId.addTextNode("system"); > SOAPElement msgMethod = callElement.addChildElement("method"); > msgMethod.addTextNode("setRetVal"); > SOAPElement paramElement = callElement.addChildElement("param"); > SOAPElement valueElement = paramElement.addChildElement("value"); > valueElement.addTextNode("attachment.txt"); > DataHandler dh = new DataHandler(new FileDataSource("C:\\Documents > and Settings\\lab\\Desktop\\car.txt")); > AttachmentPart ap = soapMsg.createAttachmentPart(); > ap.setContentId("attachment.txt"); > ap.setContent(dh.getContent(), dh.getContentType()); > soapMsg.addAttachmentPart(ap); > > OutputStream out = null; > try { > out = socket.getOutputStream(); > out.write(0x02); > soapMsg.writeTo(out); > out.write(0x03); > out.flush(); > } catch (Exception e) { > getLog().error("Exception sending the soap " + e, e); > } finally { > // if (out == null) out.close(); > } > > > Chinmoy > > On Thu, Dec 18, 2008 at 5:21 PM, Andreas Veithen > wrote: >> >> Chinmoy, >> >> Can you also attach a sample message that you try to read with this code? >> >> Andreas >> >> On Thu, Dec 18, 2008 at 06:23, Chinmoy Chakraborty >> wrote: >> > Andreas, >> > >> > Here is my code snippet. >> > >> > String contentType = multipart/related; >> > boundary=MIMEBoundaryurn_uuid_D988AB74BC9802BDC21229577126047; >> > type="text/xml"; >> > start="<0.urn:uuid:d988ab74bc9802bdc21229577126...@apache.org>" >> > >> > MimeHeaders mimeHeaders = new MimeHeaders(); >> > mimeHeaders.addHeader("Content-Type", contentType); >> > // Create the SOAP Message using mimeHeader and inputStream >> > MessageFactory mf = MessageFactory.newInstance(); >> > SOAPMessage soapMsg = mf.createMessage(mimeHeaders, in); >> > >> > The inputstream is a SOAPMessage with attachments. Now the newly created >> > soapMsg in above code snippet does not contain any attachment parts. >> > >> > I am trying to get attachment parts in the following code snippet: >> > >> > List attachments = new ArrayList() >> > if (soapMsg.countAttachments() > 0) { >> > Iterator itr = soapMsg.getAttachments(); >> > while (itr.hasNext()) { >> > AttachmentPart att = (AttachmentPart) itr.next(); >> > DataHandler dh = att.getDataHandler(); >> > attachments.add(dh); >> > } >> > } >> > >> > The attachment list is always empty. I am using following jars: >> > >> > axiom-api-SNAPSHOT.jar (modified on 16th Dec, 2008) >> > axiom-dom-SNAPSHOT.jar (modified on 16th Dec, 2008) >> > axiom-impl-SNAPSHOT.jar (modified on 16th Dec, 2008) >> > axis2-saaj-SNAPSHOT.jar (modified on 12th Dec, 2008) >
Re: Error getting attachments from SOAPMessage
Andreas, Please find attached attachment.xml which I am using as inputstream to create SOAPMessage. The MIME boundary in my previous code snippet may differ since it is generated at runtime but this is the file generated by another system. I am also sending you the code that generates the attached file. SOAPMessage soapMsg = MessageFactory.newInstance().createMessage(); //setting the namespace declaration. SOAPPart sp = soapMsg.getSOAPPart(); SOAPEnvelope se = sp.getEnvelope(); se.addNamespaceDeclaration("lw", "http://www.abc.com/xml/soap/";); soapMsg.setProperty(soapMsg.CHARACTER_SET_ENCODING, "UTF-8"); soapMsg.setProperty(soapMsg.WRITE_XML_DECLARATION, "true"); //setting the soap header. SOAPHeader soapHeader = soapMsg.getSOAPHeader(); //setting the session id SOAPElement soapHeaderElement1 = soapHeader.addChildElement("session", "lw", "http://www.abc.com/xml/soap/";); soapHeaderElement1.addTextNode("8e0b383911e3942c87fda0be8ae1879b"); //setting the transactionId SOAPElement soapHeaderElement2 = soapHeader.addChildElement("transactionId", "lw", " http://www.abc.com/xml/soap/";); soapHeaderElement2.addTextNode(String.valueOf("2")); //setting the serverId SOAPElement soapHeaderElement3 = soapHeader.addChildElement("serverId", "lw", "http://www.abc.com/xml/soap/ "); soapHeaderElement3.addTextNode(String.valueOf("192.168.1.66_d7618e5711e394247a7da0be8ae08921")); SOAPBody soapBody = soapMsg.getSOAPBody(); SOAPElement callElement = soapBody.addChildElement("call", "lw", " http://www.abc.com/xml/soap/";); SOAPElement msgObjectId = callElement.addChildElement("objectId"); msgObjectId.addTextNode("system"); SOAPElement msgMethod = callElement.addChildElement("method"); msgMethod.addTextNode("setRetVal"); SOAPElement paramElement = callElement.addChildElement("param"); SOAPElement valueElement = paramElement.addChildElement("value"); valueElement.addTextNode("attachment.txt"); DataHandler dh = new DataHandler(new FileDataSource("C:\\Documents and Settings\\lab\\Desktop\\car.txt")); AttachmentPart ap = soapMsg.createAttachmentPart(); ap.setContentId("attachment.txt"); ap.setContent(dh.getContent(), dh.getContentType()); soapMsg.addAttachmentPart(ap); OutputStream out = null; try { out = socket.getOutputStream(); out.write(0x02); soapMsg.writeTo(out); out.write(0x03); out.flush(); } catch (Exception e) { getLog().error("Exception sending the soap " + e, e); } finally { // if (out == null) out.close(); } Chinmoy On Thu, Dec 18, 2008 at 5:21 PM, Andreas Veithen wrote: > Chinmoy, > > Can you also attach a sample message that you try to read with this code? > > Andreas > > On Thu, Dec 18, 2008 at 06:23, Chinmoy Chakraborty > wrote: > > Andreas, > > > > Here is my code snippet. > > > > String contentType = multipart/related; > > boundary=MIMEBoundaryurn_uuid_D988AB74BC9802BDC21229577126047; > > type="text/xml"; > > > > start="<0.urn:uuid:d988ab74bc9802bdc21229577126...@apache.org<0.urn%3auuid%3ad988ab74bc9802bdc21229577126...@apache.org> > >" > > > > MimeHeaders mimeHeaders = new MimeHeaders(); > > mimeHeaders.addHeader("Content-Type", contentType); > > // Create the SOAP Message using mimeHeader and inputStream > > MessageFactory mf = MessageFactory.newInstance(); > > SOAPMessage soapMsg = mf.createMessage(mimeHeaders, in); > > > > The inputstream is a SOAPMessage with attachments. Now the newly created > > soapMsg in above code snippet does not contain any attachment parts. > > > > I am trying to get attachment parts in the following code snippet: > > > > List attachments = new ArrayList() > > if (soapMsg.countAttachments() > 0) { > > Iterator itr = soapMsg.getAttachments(); > > while (itr.hasNext()) { > > AttachmentPart att = (AttachmentPart) itr.next(); > > DataHandler dh = att.getDataHandler(); > > attachments.add(dh); > > } > > } > > > > The attachment list is always empty. I am using following jars: > > > > axiom-api-SNAPSHOT.jar (modified on 16th Dec, 2008) > > axiom-dom-SNAPSHOT.jar (modified on 16th Dec, 2008) > > axiom-impl-SNAPSHOT.jar (modified on 16th Dec, 2008) > > axis2-saaj-SNAPSHOT.jar (modified on 12th Dec, 2008) > > axis2-saaj-api-1.4.jar (modified on 4th April, 2008) > > > > Chinmoy > > > > > > > > On Thu, Dec 18, 2008 at 6:49 AM, Andreas Veithen < > andreas.veit...@gmail.com> > > wrote: > >> > >> Chinmoy, > >> > >> Can you post the code that demonstrates the problem? > >> > >> Andreas > >> > >> On Wed, Dec 17, 2008 at 13:40, Chinmoy Chakraborty > >> wrote: > >> > Hi All, > >> > > >> > I am creating SOAPMessage from inputstream. The inputstream is SOAP > with > >> > attachme
Re: Error getting attachments from SOAPMessage
Chinmoy, Can you also attach a sample message that you try to read with this code? Andreas On Thu, Dec 18, 2008 at 06:23, Chinmoy Chakraborty wrote: > Andreas, > > Here is my code snippet. > > String contentType = multipart/related; > boundary=MIMEBoundaryurn_uuid_D988AB74BC9802BDC21229577126047; > type="text/xml"; > start="<0.urn:uuid:d988ab74bc9802bdc21229577126...@apache.org>" > > MimeHeaders mimeHeaders = new MimeHeaders(); > mimeHeaders.addHeader("Content-Type", contentType); > // Create the SOAP Message using mimeHeader and inputStream > MessageFactory mf = MessageFactory.newInstance(); > SOAPMessage soapMsg = mf.createMessage(mimeHeaders, in); > > The inputstream is a SOAPMessage with attachments. Now the newly created > soapMsg in above code snippet does not contain any attachment parts. > > I am trying to get attachment parts in the following code snippet: > > List attachments = new ArrayList() > if (soapMsg.countAttachments() > 0) { > Iterator itr = soapMsg.getAttachments(); > while (itr.hasNext()) { > AttachmentPart att = (AttachmentPart) itr.next(); > DataHandler dh = att.getDataHandler(); > attachments.add(dh); > } > } > > The attachment list is always empty. I am using following jars: > > axiom-api-SNAPSHOT.jar (modified on 16th Dec, 2008) > axiom-dom-SNAPSHOT.jar (modified on 16th Dec, 2008) > axiom-impl-SNAPSHOT.jar (modified on 16th Dec, 2008) > axis2-saaj-SNAPSHOT.jar (modified on 12th Dec, 2008) > axis2-saaj-api-1.4.jar (modified on 4th April, 2008) > > Chinmoy > > > > On Thu, Dec 18, 2008 at 6:49 AM, Andreas Veithen > wrote: >> >> Chinmoy, >> >> Can you post the code that demonstrates the problem? >> >> Andreas >> >> On Wed, Dec 17, 2008 at 13:40, Chinmoy Chakraborty >> wrote: >> > Hi All, >> > >> > I am creating SOAPMessage from inputstream. The inputstream is SOAP with >> > attachments. But the attachmentParts becomes zero in the newly created >> > SOAPMessage though the content type is "multipart/related". >> > >> > Why it is not created attachments when I am creating SOAP from >> > inputstream >> > (with attachments)? I am using axiom-api-SNAPSHOT.jar, >> > axiom-dom-SNAPSHOT.jar, axiom-impl-SNAPSHOT.jar.(Axis2 1.4.1) >> > >> > Chinmoy > >
Re: Error getting attachments from SOAPMessage
Andreas, Here is my code snippet. String contentType = multipart/related; boundary=MIMEBoundaryurn_uuid_D988AB74BC9802BDC21229577126047; type="text/xml"; start="<0.urn:uuid:d988ab74bc9802bdc21229577126...@apache.org<0.urn%3auuid%3ad988ab74bc9802bdc21229577126...@apache.org> >" MimeHeaders mimeHeaders = new MimeHeaders(); mimeHeaders.addHeader("Content-Type", contentType); // Create the SOAP Message using mimeHeader and inputStream MessageFactory mf = MessageFactory.newInstance(); SOAPMessage soapMsg = mf.createMessage(mimeHeaders, in); The inputstream is a SOAPMessage with attachments. Now the newly created soapMsg in above code snippet does not contain any attachment parts. I am trying to get attachment parts in the following code snippet: List attachments = new ArrayList() if (soapMsg.countAttachments() > 0) { Iterator itr = soapMsg.getAttachments(); while (itr.hasNext()) { AttachmentPart att = (AttachmentPart) itr.next(); DataHandler dh = att.getDataHandler(); attachments.add(dh); } } The attachment list is always empty. I am using following jars: axiom-api-SNAPSHOT.jar (modified on 16th Dec, 2008) axiom-dom-SNAPSHOT.jar (modified on 16th Dec, 2008) axiom-impl-SNAPSHOT.jar (modified on 16th Dec, 2008) axis2-saaj-SNAPSHOT.jar (modified on 12th Dec, 2008) axis2-saaj-api-1.4.jar (modified on 4th April, 2008) Chinmoy On Thu, Dec 18, 2008 at 6:49 AM, Andreas Veithen wrote: > Chinmoy, > > Can you post the code that demonstrates the problem? > > Andreas > > On Wed, Dec 17, 2008 at 13:40, Chinmoy Chakraborty > wrote: > > Hi All, > > > > I am creating SOAPMessage from inputstream. The inputstream is SOAP with > > attachments. But the attachmentParts becomes zero in the newly created > > SOAPMessage though the content type is "multipart/related". > > > > Why it is not created attachments when I am creating SOAP from > inputstream > > (with attachments)? I am using axiom-api-SNAPSHOT.jar, > > axiom-dom-SNAPSHOT.jar, axiom-impl-SNAPSHOT.jar.(Axis2 1.4.1) > > > > Chinmoy >
Re: Error getting attachments from SOAPMessage
Chinmoy, Can you post the code that demonstrates the problem? Andreas On Wed, Dec 17, 2008 at 13:40, Chinmoy Chakraborty wrote: > Hi All, > > I am creating SOAPMessage from inputstream. The inputstream is SOAP with > attachments. But the attachmentParts becomes zero in the newly created > SOAPMessage though the content type is "multipart/related". > > Why it is not created attachments when I am creating SOAP from inputstream > (with attachments)? I am using axiom-api-SNAPSHOT.jar, > axiom-dom-SNAPSHOT.jar, axiom-impl-SNAPSHOT.jar.(Axis2 1.4.1) > > Chinmoy