[OSL | CCIE_Voice] (no subject)

[network engineer]

AM i in right forum guys no message here anyone around 
Ping  ___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

[OSL | CCIE_Voice] (no subject)

[aman sinha]

When I am applying ip pim sparse-dense mode on virtual template 200 of HQ
and BR1 routers,
Which are connected by Frame relay ,. The Two routers stop pinging each
other.

What could be the issue.??
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Bill Lake]

No you will still be a CCIE 

You will just be in a retired track

You will be able to upgrade to CCIE collaboration by passing the CCIE 
collaboration written exam

Good luck on you lab

Sent from my iPhone

On Jul 8, 2013, at 12:22 PM, Dharambirku  wrote:

> Hi
> i am going for ccie voice lab in November.
> can anyone guide if i get ccie number then after 14th Feb 2014 ,my ccie no 
> will be valid or not
> 
> 
> Sent from Samsung Mobile
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[Dharambirku]

Hi
i am going for ccie voice lab in November.
can anyone guide if i get ccie number then after 14th Feb 2014 ,my ccie no will 
be valid or not


Sent from Samsung Mobile___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Shabeeb Mohammed]

Hey ravi,

I believe it means that mgcp packets was disrupted in between transmission
resulting in packet loss etc. This error implies that there is a bug in the
ios. Try upgrading the ios and check

Regards
Shabeeb
On 21 May 2013 04:28, "ie ravindra"  wrote:

> Dear All,
>
> Whats is the real meaning of MGCP tear down. Is it means dropping a call
> or , What  ? thanks for your valuable input.
>
> Ravi,
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[ie ravindra]

Dear All,

Whats is the real meaning of MGCP tear down. Is it means dropping a call or
, What  ? thanks for your valuable input.

Ravi,
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[Dharambirku]

Hi
I have one query please guide..
One user is complaining that MWI light not work if new voice msg comes but when 
5 new messeges are stored on unity express then light goes on.
So where is the issue on 

Looking forward to ur response 
Thanks
Dharambir
Cme and unity express 



Sent from Samsung Mobile___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[Asif Mujawar]

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[ie ravindra]

Dear All On Board,


I am in approach for the exam in coming June. Unfortunately due to my
fathers illness I was not covered all the subject areas. I have covered
only conceptual parts. I am not wanted to loose my exam at the first time.
I want to do it however with outstanding performance. What are the
suggestion to be in subject for next three months.I have completed 70% and
I do have relevent practicals on 50%.

Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[ABHISHEK BANSAL]

-- 


Thanks & Regards
Abhishek Bansal
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[chase mergenthal]

Is proctorlabs down?

-Chase Mergenthal

--
If winners never quit and quitters never win, then who coined the phrase, "Quit 
while you’re still ahead."?



  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[Justin McIntyre]

the trick here is in your patterns digit analysis.  You need the put the 
expected digits to seperate LD from say Local or international

try this out and see what happens ...

911  - marked as urgent priority
9.[2-9]XX   - discard digit predot
90112.XXX- discard digit predot


and of course you can change this how you wan to but you need to differentiate 
betwwen Local, LD and Int dialing.  The way to do this is with the prepending 
digits...so for NANP dialing you would have..


911 urgent

9.[2-9]XX  local 7 digit

9.1[2-9]..[2-9]..  LD 11 digit (10 digit will always work)

9.011!  international pattern


now enblock or digit by digit analysis will succeed.




Message: 2
Date: Thu, 12 Jul 2012 13:51:27 +0300
From: The Masterplan 
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Overlapping route patterns
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

Hi,

I have the following route patterns on CUCM that have a mgcp gateway in
route list:
911  - marked as urgent priority
9.XXX   - discard digit predot
91112.XXX- discard digit predot
Because those are overlapping route patterns, their behaviour is different
depending if enbloc dialing is used or not:

From: ccie_voice-boun...@onlinestudylist.com 
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com [ccie_voice-requ...@onlinestudylist.com]
Sent: Thursday, July 12, 2012 12:00 PM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 77, Issue 19

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Re: CUC imported users behaviour (Kevin Spicer)
   2. Overlapping route patterns (The Masterplan)
   3. Re: Overlapping route patterns (Dan Quinlan (daquinla))


--

Message: 1
Date: Wed, 11 Jul 2012 19:02:55 +0100
From: Kevin Spicer 
To: The Masterplan 
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUC imported users behaviour
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

I don't have it to hand, that was from memory :(  but if you search.the
archive for those commands I have posted it before.

On 11 Jul 2012 18:41, "The Masterplan"  wrote:

> Awesome Kevin. I got burned 1 day by this bug. Can you give me the cisco
> troubleshoot link from where you get those commands?
>
> Thank you once again.
>
> On Wed, Jul 11, 2012 at 8:17 PM, Kevin Spicer wrote:
>
>> There's a bug in cuc that prevents mail from pstn being delivered if the
>> smtp domain has been changed.  Perhaps you hit that (affects the 5 lab
>> workbook lab rentals).
>> run cuc dbquery unitydirdb select * from tbl_alias
>> to see if domains all match.
>> If not fix with
>> run cuc dbquery unitydirdb EXECUTE PROCEDURE csp_SmtpAddressMigrate('
>> new.com','old.com')
>> (substitute the correct old and new domain)
>>
>> On 11 Jul 2012 18:03, "The Masterplan"  wrote:
>>
>>> Hi,
>>>
>>> I am struggling with a strange CUC behaviour and I am interested if
>>> anyone experienced this.
>>>
>>> For users imported from CUC, no message is being recorded in user
>>> mailbox, altough the system play (after the user press # for more options
>>> and then 1 to send this message ) "your message has been sent". On that
>>> imported user, if I go to edit-> Mailbox it shows that the number of
>>> messages is 0.
>>>
>>> If  I create users from CUC administration everything is working fine, I
>>> receive MWI and I see the corresponding number of messages in user mailbox.
>>>
>>> In order to solve this issue, I deactivated/activated all the unity
>>> services and then I restarted CUCM and CUC and still nothing. I usually
>>> activate all the CUC services and then I start to configure it (Phone
>>> System, Port group, Port, User templates etc) and in this case I've done
>>> the same.
>>>
>>> Thank you experts,
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>
-- next part --
An HTML attachment was scrubbed...
URL: 

--

Message: 2
Date: Thu, 12 Jul 2012 13:51:27 

[OSL | CCIE_Voice] (no subject)

[voice boy]

 
http://fatloss.acaiberrysupplementsite.com/wp-content/uploads/fgallery/tokare.html?cl=unydqk
 ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[racerra...@yahoo.com]

http://mimi-knoop.com/wp-content/themes/organic_portfolio_white/work.php?wonder53.jpg___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Brian Mulgrew]

Hey, dude! Look at this! You will be really surprised!... 
http://www.cercasa.it/comp.link.php?rjwgoogleId=08e0
  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[Pardeep Singh (pardsing)]

Please unsubscribe me from this list.

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[John McClain]

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[edgar feliz]

Also make sure under Remote Destination Configuration that you [/] the line 
associating box. I just went through this and that was my issue.

EJ



From: Alex Goh 
To: Mini Me 
Cc: "ccie_voice@onlinestudylist.com" 
Sent: Saturday, August 27, 2011 8:50 PM
Subject: Re: [OSL | CCIE_Voice] (no subject)


check also did the mva was enable for the user under end user page.


On Sat, Aug 27, 2011 at 1:00 AM, Mini Me  wrote:

Did you enable it in Service Parameters?
>
>
>HTH
>
>From:  Ray 
>Reply-To:  Ray 
>Date:  Fri, 26 Aug 2011 08:32:19 -0700 (PDT)
>To:  "ccie_voice@onlinestudylist.com" 
>Subject:  [OSL | CCIE_Voice] (no subject)
>
>
>
>when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask 
>me to 
press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me 
dial any extension.. help
>
> 
>SB#sho run
>Building configuration...
>
>
>
>
>Current configuration : 5001 bytes
>!
>! Last configuration change at 05:10:01 CST Fri Aug 26 2011
>! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011
>!
>version 15.0
>service timestamps debug datetime msec
>service timestamps log datetime msec
>no service password-encryption
>!
>hostname BR1
>!
>boot-start-marker
>boot-end-marker
>!
>!
>no aaa new-model
>!
>!
>!
>clock timezone CST -6
>clock summer-time CST recurring
>network-clock-participate wic 2 
>!
>dot11 syslog
>ip source-route
>!
>!
>ip cef
>!
>ip dhcp pool phone
>   network 177.2.11.0 255.255.255.0
>   default-router 177.2.11.1 
>   option 150 ip 10.11.11.19 
>!
>!
>no ipv6 cef
>!
>multilink bundle-name authenticated
>!
>!
>!
>!
>isdn switch-type primary-ni
>!
>!         
>!
>voice class codec 1
> codec preference 1 g711ulaw
> codec preference 2 g729r8
>!
>voice class h323 1
>  h225 timeout tcp establish 3
>  call start slow
>!
>!
>!
>voice translation-rule 1
> rule 1 // // type any unknown plan any isdn
>!
>voice translation-rule 2
> rule 1 // // type any subscriber plan any isdn
>!
>voice translation-rule 3
> rule 1 // // type any national plan any isdn
>!
>voice translation-rule 4
> rule 1 // // type any international plan any isdn
>!         
>voice translation-rule 5
> rule 1 /.*\(3...\)/ /\1/
>!
>voice translation-rule 11
> rule 1 /^3...$/ /972303&/ type any unknown plan any isdn
>!
>voice translation-rule 12
> rule 1 /^3...$/ /303&/ type any subscriber plan any isdn
>!
>voice translation-rule 13
> rule 1 /^3...$/ /972303&/ type any national plan any isdn
>!
>voice translation-rule 14
> rule 1 /^3...$/ /+1972303&/ type any international plan any isdn
> rule 2 /^4...$/ /+8522404&/ type any international plan any isdn
>!
>!
>voice translation-profile 911
> translate calling 11
> translate called 1
>!
>voice translation-profile INC
> translate called 5
>!
>voice translation-profile intl
> translate calling 14
> translate called 4
>!
>voice translation-profile local
> translate calling 12
> translate called 2
>!
>voice translation-profile nat
> translate calling 13
> translate called 3
>!
>!
>voice-card 0
>!
>!
>application
> service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml
> !
>!
>!
>!         
>!
>!
>license udi pid CISCO2811 sn FTX0902D1ZG
>!
>redundancy
>!
>!
>controller T1 0/2/0
> pri-group timeslots 1-4,24
>!
>! 
>!
>!
>!
>!
>!
>!
>!
>interface Loopback0
> ip address 18.1.1.1 255.255.255.0
> ip ospf network point-to-point
> h323-gateway voip interface
> h323-gateway voip bind srcaddr 18.1.1.1
> !
>!
>interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
>!
>interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
>!
>interface FastEthernet0/1/0
> switchport trunk native vlan 12
> switchport mode trunk
> switchport voice vlan 11
> spanning-tree portfast
> !
>!         
>interface FastEthernet0/1/1
> switchport trunk native vlan 12
> switchport mode trunk
> switchport voice vlan 11
> spanning-tree portfast
> !        
>!         
>interface FastEthernet0/1/2
> switchport trunk native vlan 12
> switchport mode trunk
> switchport voice vlan 11
> spanning-tree portfast
> !        
>!         
>interface FastEthernet0/1/3
> switchport trunk native vlan 12
> switchport mode trunk
> switchport voice vlan 11
> spanning-tree portfast
> !        
>!         
>interface Serial0/0/0
> no ip address
> enca

Re: [OSL | CCIE_Voice] (no subject)

[Alex Goh]

check also did the mva was enable for the user under end user page.

On Sat, Aug 27, 2011 at 1:00 AM, Mini Me  wrote:

> Did you enable it in Service Parameters?
>
> HTH
>
> From: Ray 
> Reply-To: Ray 
> Date: Fri, 26 Aug 2011 08:32:19 -0700 (PDT)
> To: "ccie_voice@onlinestudylist.com" 
> Subject: [OSL | CCIE_Voice] (no subject)
>
> when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR
> ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it
> doesnt let me dial any extension.. help
>
> SB#sho run
> Building configuration...
>
>
> Current configuration : 5001 bytes
> !
> ! Last configuration change at 05:10:01 CST Fri Aug 26 2011
> ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011
> !
> version 15.0
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname BR1
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> !
> !
> clock timezone CST -6
> clock summer-time CST recurring
> network-clock-participate wic 2
> !
> dot11 syslog
> ip source-route
> !
> !
> ip cef
> !
> ip dhcp pool phone
>network 177.2.11.0 255.255.255.0
>default-router 177.2.11.1
>option 150 ip 10.11.11.19
> !
> !
> no ipv6 cef
> !
> multilink bundle-name authenticated
> !
> !
> !
> !
> isdn switch-type primary-ni
> !
> !
> !
> voice class codec 1
>  codec preference 1 g711ulaw
>  codec preference 2 g729r8
> !
> voice class h323 1
>   h225 timeout tcp establish 3
>   call start slow
> !
> !
> !
> voice translation-rule 1
>  rule 1 // // type any unknown plan any isdn
> !
> voice translation-rule 2
>  rule 1 // // type any subscriber plan any isdn
> !
> voice translation-rule 3
>  rule 1 // // type any national plan any isdn
> !
> voice translation-rule 4
>  rule 1 // // type any international plan any isdn
> !
> voice translation-rule 5
>  rule 1 /.*\(3...\)/ /\1/
> !
> voice translation-rule 11
>  rule 1 /^3...$/ /972303&/ type any unknown plan any isdn
> !
> voice translation-rule 12
>  rule 1 /^3...$/ /303&/ type any subscriber plan any isdn
> !
> voice translation-rule 13
>  rule 1 /^3...$/ /972303&/ type any national plan any isdn
> !
> voice translation-rule 14
>  rule 1 /^3...$/ /+1972303&/ type any international plan any isdn
>  rule 2 /^4...$/ /+8522404&/ type any international plan any isdn
> !
> !
> voice translation-profile 911
>  translate calling 11
>  translate called 1
> !
> voice translation-profile INC
>  translate called 5
> !
> voice translation-profile intl
>  translate calling 14
>  translate called 4
> !
> voice translation-profile local
>  translate calling 12
>  translate called 2
> !
> voice translation-profile nat
>  translate calling 13
>  translate called 3
> !
> !
> voice-card 0
> !
> !
> application
>  service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml
>  !
> !
> !
> !
> !
> !
> license udi pid CISCO2811 sn FTX0902D1ZG
> !
> redundancy
> !
> !
> controller T1 0/2/0
>  pri-group timeslots 1-4,24
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
>  ip address 18.1.1.1 255.255.255.0
>  ip ospf network point-to-point
>  h323-gateway voip interface
>  h323-gateway voip bind srcaddr 18.1.1.1
>  !
> !
> interface FastEthernet0/0
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
>  !
> !
> interface FastEthernet0/1
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
>  !
> !
> interface FastEthernet0/1/0
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface FastEthernet0/1/1
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface FastEthernet0/1/2
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface FastEthernet0/1/3
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface Serial0/0/0
>  no ip address
>  encapsulation frame-relay
>  no frame-relay inverse-arp
>  !
> !
> interface Serial0/0/0.101 point-to-point
>  ip address 177.0.101.2 255.255.255.0
>  frame-relay interface-dlci 602
> !
> interface Serial0/0/1
>  no ip address
>  shutdown
>  clock rate 2000

Re: [OSL | CCIE_Voice] (no subject)

[Mini Me]

Did you enable it in Service Parameters?

HTH

From:  Ray 
Reply-To:  Ray 
Date:  Fri, 26 Aug 2011 08:32:19 -0700 (PDT)
To:  "ccie_voice@onlinestudylist.com" 
Subject:  [OSL | CCIE_Voice] (no subject)

when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask
me to press 2 to turn on the remote dest or press 3 to turn it off.. it
doesnt let me dial any extension.. help
 
SB#sho run
Building configuration...


Current configuration : 5001 bytes
!
! Last configuration change at 05:10:01 CST Fri Aug 26 2011
! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
!
clock timezone CST -6
clock summer-time CST recurring
network-clock-participate wic 2
!
dot11 syslog
ip source-route
!
!
ip cef
!
ip dhcp pool phone
   network 177.2.11.0 255.255.255.0
   default-router 177.2.11.1
   option 150 ip 10.11.11.19
!
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-ni
!
! 
!
voice class codec 1
 codec preference 1 g711ulaw
 codec preference 2 g729r8
!
voice class h323 1
  h225 timeout tcp establish 3
  call start slow
!
!
!
voice translation-rule 1
 rule 1 // // type any unknown plan any isdn
!
voice translation-rule 2
 rule 1 // // type any subscriber plan any isdn
!
voice translation-rule 3
 rule 1 // // type any national plan any isdn
!
voice translation-rule 4
 rule 1 // // type any international plan any isdn
! 
voice translation-rule 5
 rule 1 /.*\(3...\)/ /\1/
!
voice translation-rule 11
 rule 1 /^3...$/ /972303&/ type any unknown plan any isdn
!
voice translation-rule 12
 rule 1 /^3...$/ /303&/ type any subscriber plan any isdn
!
voice translation-rule 13
 rule 1 /^3...$/ /972303&/ type any national plan any isdn
!
voice translation-rule 14
 rule 1 /^3...$/ /+1972303&/ type any international plan any isdn
 rule 2 /^4...$/ /+8522404&/ type any international plan any isdn
!
!
voice translation-profile 911
 translate calling 11
 translate called 1
!
voice translation-profile INC
 translate called 5
!
voice translation-profile intl
 translate calling 14
 translate called 4
!
voice translation-profile local
 translate calling 12
 translate called 2
!
voice translation-profile nat
 translate calling 13
 translate called 3
!
!
voice-card 0
!
!
application
 service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml
 !
!
!
! 
!
!
license udi pid CISCO2811 sn FTX0902D1ZG
!
redundancy
!
!
controller T1 0/2/0
 pri-group timeslots 1-4,24
!
! 
!
!
!
!
!
!
!
interface Loopback0
 ip address 18.1.1.1 255.255.255.0
 ip ospf network point-to-point
 h323-gateway voip interface
 h323-gateway voip bind srcaddr 18.1.1.1
 !
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
 !
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
 !
!
interface FastEthernet0/1/0
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !
! 
interface FastEthernet0/1/1
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !
! 
interface FastEthernet0/1/2
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !
! 
interface FastEthernet0/1/3
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !
! 
interface Serial0/0/0
 no ip address
 encapsulation frame-relay
 no frame-relay inverse-arp
 !
! 
interface Serial0/0/0.101 point-to-point
 ip address 177.0.101.2 255.255.255.0
 frame-relay interface-dlci 602
! 
interface Serial0/0/1
 no ip address
 shutdown 
 clock rate 200
 !
! 
interface Serial0/2/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 isdn outgoing ie facility
 isdn outgoing display-ie
 no cdp enable
 !
! 
interface Vlan1
 no ip address
 !
! 
interface Vlan11
 ip address 177.2.11.1 255.255.255.0
 ip helper-address 10.11.11.19
 !
! 
interface Vlan12
 ip address 177.2.12.1 255.255.255.0
 !
! 
! 
router ospf 1
 log-adjacency-changes
 network 18.1.1.1 0.0.0.0 area 0
 network 177.0.101.0 0.0.0.255 area 0
 network 177.2.11.0 0.0.0.255 area 0
 network 177.2.12.0 0.0.0.255 area 0
! 
ip forward-protocol nd
no ip http server
no ip http secure-server
! 
! 
! 
! 
! 
! 
! 
! 
! 
control-plane
 !
! 
! 
voice-port 0/2/0:23
 translation-profile incoming INC
! 
! 
mgcp fax t38 ecm
! 
! 
dial-peer voice 1 pots
 incoming called-number .
 direct-in

[OSL | CCIE_Voice] (no subject)

[Ray]

when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me 
to 
press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me 
dial any extension.. help

 
SB#sho run
Building configuration...


Current configuration : 5001 bytes
!
! Last configuration change at 05:10:01 CST Fri Aug 26 2011
! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
!
clock timezone CST -6
clock summer-time CST recurring
network-clock-participate wic 2 
!
dot11 syslog
ip source-route
!
!
ip cef
!
ip dhcp pool phone
   network 177.2.11.0 255.255.255.0
   default-router 177.2.11.1 
   option 150 ip 10.11.11.19 
!
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-ni
!
!         
!
voice class codec 1
 codec preference 1 g711ulaw
 codec preference 2 g729r8
!
voice class h323 1
  h225 timeout tcp establish 3
  call start slow
!
!
!
voice translation-rule 1
 rule 1 // // type any unknown plan any isdn
!
voice translation-rule 2
 rule 1 // // type any subscriber plan any isdn
!
voice translation-rule 3
 rule 1 // // type any national plan any isdn
!
voice translation-rule 4
 rule 1 // // type any international plan any isdn
!         
voice translation-rule 5
 rule 1 /.*\(3...\)/ /\1/
!
voice translation-rule 11
 rule 1 /^3...$/ /972303&/ type any unknown plan any isdn
!
voice translation-rule 12
 rule 1 /^3...$/ /303&/ type any subscriber plan any isdn
!
voice translation-rule 13
 rule 1 /^3...$/ /972303&/ type any national plan any isdn
!
voice translation-rule 14
 rule 1 /^3...$/ /+1972303&/ type any international plan any isdn
 rule 2 /^4...$/ /+8522404&/ type any international plan any isdn
!
!
voice translation-profile 911
 translate calling 11
 translate called 1
!
voice translation-profile INC
 translate called 5
!
voice translation-profile intl
 translate calling 14
 translate called 4
!
voice translation-profile local
 translate calling 12
 translate called 2
!
voice translation-profile nat
 translate calling 13
 translate called 3
!
!
voice-card 0
!
!
application
 service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml
 !
!
!
!         
!
!
license udi pid CISCO2811 sn FTX0902D1ZG
!
redundancy
!
!
controller T1 0/2/0
 pri-group timeslots 1-4,24
!
! 
!
!
!
!
!
!
!
interface Loopback0
 ip address 18.1.1.1 255.255.255.0
 ip ospf network point-to-point
 h323-gateway voip interface
 h323-gateway voip bind srcaddr 18.1.1.1
 !
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
 !
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
 !
!
interface FastEthernet0/1/0
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !
!         
interface FastEthernet0/1/1
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !        
!         
interface FastEthernet0/1/2
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !        
!         
interface FastEthernet0/1/3
 switchport trunk native vlan 12
 switchport mode trunk
 switchport voice vlan 11
 spanning-tree portfast
 !        
!         
interface Serial0/0/0
 no ip address
 encapsulation frame-relay
 no frame-relay inverse-arp
 !        
!         
interface Serial0/0/0.101 point-to-point
 ip address 177.0.101.2 255.255.255.0
 frame-relay interface-dlci 602   
!         
interface Serial0/0/1
 no ip address
 shutdown 
 clock rate 200
 !        
!         
interface Serial0/2/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 isdn outgoing ie facility 
 isdn outgoing display-ie
 no cdp enable
 !        
!         
interface Vlan1
 no ip address
 !        
!         
interface Vlan11
 ip address 177.2.11.1 255.255.255.0
 ip helper-address 10.11.11.19
 !        
!         
interface Vlan12
 ip address 177.2.12.1 255.255.255.0
 !        
!         
!         
router ospf 1
 log-adjacency-changes
 network 18.1.1.1 0.0.0.0 area 0
 network 177.0.101.0 0.0.0.255 area 0
 network 177.2.11.0 0.0.0.255 area 0
 network 177.2.12.0 0.0.0.255 area 0
!         
ip forward-protocol nd
no ip http server
no ip http secure-server
!         
!         
!         
!         
!         
!         
!         
!         
!         
control-plane
 !        
!         
!         
voice-port 0/2/0:23
 translation-profile incoming INC
!         
!         
mgcp fax t38 ecm
!         
!         
dial-peer voice 1 pots
 incoming called-number .
 direct-inward-dial
!         
dial-peer voice 19 voip
 destination-pattern 3...$
 session target ipv4:10.11.11.19
 voice-class codec 1
 dtmf-relay h245-alphanumeric
!         
dial-peer voice 912 pots
 translation-profile outgoing loca

Re: [OSL | CCIE_Voice] (no subject)

[Rrcrumm]

Why can't you do auto register? Then you don't need to worryabout which model.
Rc

Sent from my iPhone

On Jun 19, 2011, at 10:34 AM, Santiago Figueroa  wrote:

> I already add the cucm as that
>  
>  
> 
>  
>  
>  
> Model is from http://x.x.x.x
>  
> Model Number
>  
> CP-7941G
>  
>  
> My ip phone in cucm
> 
>  
>  
> Thanks.
>  
>  
> De: shabeeb mohammed [mailto:shabeebc...@gmail.com] 
> Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m.
> Para: Santiago Figueroa
> CC: ccie_voice@onlinestudylist.com
> Asunto: Re: [OSL | CCIE_Voice] (no subject)
>  
> just make sure that the phone model is 7941 or 7941G..
> check, try and update :)
> 
> On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa  
> wrote:
> Hello I have a doubt what is reason the ip phone 7941 do not registered to 
> cucm the status reject, I am sure the MAC and phone type in the cucm is add 
> correctly.
>  
> Thanks.
>  
>  
>  
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para 
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, 
> le rogamos nos los comunique y proceda a su borrado. Gracias.
> 
> Information included in this e-mail and attached files is CONFIDENTIAL and 
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
> permission is not allowed. If you have received this e-mail and you are not 
> the intended recipient, please let us know and erase the message and attached 
> files. Thank you.
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
>  
> 
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para 
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, 
> le rogamos nos los comunique y proceda a su borrado. Gracias.
> 
> Information included in this e-mail and attached files is CONFIDENTIAL and 
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
> permission is not allowed. If you have received this e-mail and you are not 
> the intended recipient, please let us know and erase the message and attached 
> files. Thank you.
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Peterson, Ryan]

If it is a G phone, you will need to select 7941G-GE from the list.

RP

On Jun 19, 2011, at 11:52 AM, "Santiago Figueroa" 
mailto:sfigue...@mnet.com.mx>> wrote:

I already add the cucm as that






Model is from <http://x.x.x.x/> http://x.x.x.x

Model Number



CP-7941G



My ip phone in cucm



Thanks.



De: shabeeb mohammed [mailto:shabeebc...@gmail.com]
Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m.
Para: Santiago Figueroa
CC: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>
Asunto: Re: [OSL | CCIE_Voice] (no subject)

just make sure that the phone model is 7941 or 7941G..
check, try and update :)
On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa 
<<mailto:sfigue...@mnet.com.mx>sfigue...@mnet.com.mx<mailto:sfigue...@mnet.com.mx>>
 wrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm 
the status reject, I am sure the MAC and phone type in the cucm is add 
correctly.

Thanks.




La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.

___
For more information regarding industry leading CCIE Lab training, please visit 
<http://www.ipexpert.com> www.ipexpert.com<http://www.ipexpert.com>

Are you a CCNP or CCIE and looking for a job? Check out 
<http://www.PlatinumPlacement.com> 
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>



La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
<http://www.ipexpert.com> www.ipexpert.com<http://www.ipexpert.com>

Are you a CCNP or CCIE and looking for a job? Check out 
<http://www.PlatinumPlacement.com> 
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

The information contained in this transmission is confidential. It is
intended solely for the use of the individual(s) or organization(s) to
whom it is addressed. Any disclosure, copying or further distribution is
not permitted unless such privilege is explicitly granted in writing by
PC Mall, Inc. Furthermore, PC Mall, Inc. is not responsible for
the proper and complete transmission of the substance of this
communication, nor for any delay in its receipt. 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Peterson, Ryan]

Correct TFTP server?

RP

On Jun 19, 2011, at 11:50 AM, "George Goglidze" 
mailto:gogli...@gmail.com>> wrote:

db replication problems?

On Sun, Jun 19, 2011 at 4:49 PM, Santiago Figueroa 
<sfigue...@mnet.com.mx>
 wrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm 
the status reject, I am sure the MAC and phone type in the cucm is add 
correctly.

Thanks.




La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.

___
For more information regarding industry leading CCIE Lab training, please visit 
 www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
 
www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
 www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
 
www.PlatinumPlacement.com
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

The information contained in this transmission is confidential. It is
intended solely for the use of the individual(s) or organization(s) to
whom it is addressed. Any disclosure, copying or further distribution is
not permitted unless such privilege is explicitly granted in writing by
PC Mall, Inc. Furthermore, PC Mall, Inc. is not responsible for
the proper and complete transmission of the substance of this
communication, nor for any delay in its receipt. 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Cristobal Priego]

it could be a replication problem
if it says reject reset the phone quite a few times and it will register
eventually

2011/6/19 Santiago Figueroa 

>  Hello I have a doubt what is reason the ip phone 7941 do not registered
> to cucm the status reject, I am sure the MAC and phone type in the cucm is
> add correctly.
>
> ** **
>
> Thanks.
>
> ** **
>
> ** **
>
> --
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe,
> le rogamos nos los comunique y proceda a su borrado. Gracias.
>
> Information included in this e-mail and attached files is CONFIDENTIAL and
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without
> permission is not allowed. If you have received this e-mail and you are not
> the intended recipient, please let us know and erase the message and
> attached files. Thank you.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Roger Carpio]

Santiago,

This is a question I would expect from an end user; not someone who's
preparing for the CCIE Lab. Please do your homework; get detailed sdi/sdl
traces, app logs, packet captures and if those don't give you the answer;
forward them to me and I'll take a look at them.

Please don't take it personal, we've all went thru basic configuration
issues when we started but let's just try to keep the distribution list at
expert level as much as possible. Perhaps if you ask for help telling us
what you have done; you wouldn't receive an answer like mine.

Finally, from my experience; look at the back of the IP phone and make sure
you are adding the correct phone model in CUCM. An App log will easily show
you this mismatch if that were the case.

Regards,
Roger Carpio.

On Sun, Jun 19, 2011 at 10:49 AM, Santiago Figueroa
wrote:

>  Hello I have a doubt what is reason the ip phone 7941 do not registered
> to cucm the status reject, I am sure the MAC and phone type in the cucm is
> add correctly.
>
> ** **
>
> Thanks.
>
> ** **
>
> ** **
>
> --
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe,
> le rogamos nos los comunique y proceda a su borrado. Gracias.
>
> Information included in this e-mail and attached files is CONFIDENTIAL and
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without
> permission is not allowed. If you have received this e-mail and you are not
> the intended recipient, please let us know and erase the message and
> attached files. Thank you.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Santiago Figueroa]

the problem already solved it, erase the telephone and again I gave it of high

De: shabeeb mohammed [mailto:shabeebc...@gmail.com]
Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m.
Para: Santiago Figueroa
CC: ccie_voice@onlinestudylist.com
Asunto: Re: [OSL | CCIE_Voice] (no subject)

just make sure that the phone model is 7941 or 7941G..
check, try and update :)
On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa 
mailto:sfigue...@mnet.com.mx>> wrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm 
the status reject, I am sure the MAC and phone type in the cucm is add 
correctly.

Thanks.




La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com<http://www.ipexpert.com>

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>



La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[shabeeb mohammed]

just make sure that the phone model is *7941 *or *7941G*..
check, try and update :)

On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa wrote:

>  Hello I have a doubt what is reason the ip phone 7941 do not registered
> to cucm the status reject, I am sure the MAC and phone type in the cucm is
> add correctly.
>
> ** **
>
> Thanks.
>
> ** **
>
> ** **
>
> --
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe,
> le rogamos nos los comunique y proceda a su borrado. Gracias.
>
> Information included in this e-mail and attached files is CONFIDENTIAL and
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without
> permission is not allowed. If you have received this e-mail and you are not
> the intended recipient, please let us know and erase the message and
> attached files. Thank you.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Santiago Figueroa]

Do you know if is possible to change the parameters of tftp from 
http://x.x.x.x(ipphone)<http://x.x.x.x(ipphone)/>  ?If for example I change the 
tftp but ip phone do not take change from dhcp?

Thanks.


De: Joe Martini [mailto:joem...@cisco.com]
Enviado el: Domingo, 19 de Junio de 2011 12:20 p.m.
Para: Santiago Figueroa
CC: ccie_voice@onlinestudylist.com
Asunto: Re: [OSL | CCIE_Voice] (no subject)

If the phone is added as SCCP in but is running SIP firmware that can cause the 
problem, also make sure you have a non-secure profile set on the phone too.

On Jun 19, 2011, at 11:49 AM, Santiago Figueroa wrote:


Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm 
the status reject, I am sure the MAC and phone type in the cucm is add 
correctly.

Thanks.




La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com<http://www.ipexpert.com>

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>



La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[George Goglidze]

db replication problems?

On Sun, Jun 19, 2011 at 4:49 PM, Santiago Figueroa wrote:

>  Hello I have a doubt what is reason the ip phone 7941 do not registered
> to cucm the status reject, I am sure the MAC and phone type in the cucm is
> add correctly.
>
> ** **
>
> Thanks.
>
> ** **
>
> ** **
>
> --
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe,
> le rogamos nos los comunique y proceda a su borrado. Gracias.
>
> Information included in this e-mail and attached files is CONFIDENTIAL and
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without
> permission is not allowed. If you have received this e-mail and you are not
> the intended recipient, please let us know and erase the message and
> attached files. Thank you.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Joe Martini]

If the phone is added as SCCP in but is running SIP firmware that can cause the 
problem, also make sure you have a non-secure profile set on the phone too.

On Jun 19, 2011, at 11:49 AM, Santiago Figueroa wrote:

Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm 
the status reject, I am sure the MAC and phone type in the cucm is add 
correctly.
 
Thanks.
 
 

La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Santiago Figueroa]

Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm 
the status reject, I am sure the MAC and phone type in the cucm is add 
correctly.

Thanks.




La informaci?n incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No est? permitida su divulgaci?n y/o 
reproducci?n sin autorizaci?n. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Ted Nugent]

http://infoj.org/indexz36X.php
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Ted Nugent]

http://classic-clay.com/indexz35X.php
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] (no subject)

[mega sema]

http://www.apartmentsindowntowndallas.com/inside.html
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] (no subject)

[Bill Lake]

You can use IP Blue soft phone for some applications, especially the PSTN
phone.

You can use X-Lite for SIP phone and you can also share phones between
sites.

Be sure to get the lab version of IP blue so you can run 5 instances at
once.  This lets you receive calls very easily so you could take hardware
phones to where your testing features from and use softphones for the other
side of the call.

Be advised that some features are not supported on softphones so when in
doubt, test with a hardware phone.


2011/4/2 Mohamed Gazzaz 

>  Hello,
>
> Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to
> practice. Do I need to get 2 additional IP Phones to practice all the
> scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to
> SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and
> SCCP) and one phone for PSTN. .
>
> One last question, Can I skip Volume 1 5A labs and start with 5C labs? or
> do I have to finish 5A before moving to 5C?
>
> Thank you.
>
> Regards,
> Mohamed Gazzaz
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[CCIE Voice]

To replicate the lab scenario you should have 3 phones at hq, 2 at sites 
br1/br2 
and 1 pstn phone. Pstn phone can be 7960. Others should be 7965 or 7962 for 
most accuracy. 

--


On Apr 2, 2011, at 2:36, Mohamed Gazzaz  wrote:

> Hello,
> 
> Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to 
> practice. Do I need to get 2 additional IP Phones to practice all the 
> scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to 
> SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and 
> SCCP) and one phone for PSTN. .
> 
> One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do 
> I have to finish 5A before moving to 5C?
> 
> Thank you.
> 
> Regards,
> Mohamed Gazzaz
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Mohamed Gazzaz]

Hello,

Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to 
practice. Do I need to get 2 additional IP Phones to practice all the 
scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, 
and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and 
one phone for PSTN. .

One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I 
have to finish 5A before moving to 5C?

Thank you.

Regards,
Mohamed Gazzaz___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Roberto Reyes Alanis]

I had the same problem, maybe 3 weeks ago. The solution was uncheck the 
restriction pattern "*" inside of RESTRICTION TABLES àDEFAULT SYSTEM TRANSFER.

 

GREETINGS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

Hi David,
 
Yes that is the question iam trying to answer and I know it asks users with 
mailbox to do the transfer during opening greeting. I can only do with users 
who don't have mailbox. I followed the solution guide but didn't work. If you 
know how, please indicate step by step to follow. I might be missing something. 
Thanks alot.
 
Regards,
 
Waleed
 


Date: Thu, 28 Oct 2010 18:35:46 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: david.a...@gmail.com
To: walid...@hotmail.com
CC: vcc...@gmail.com; ccie_voice@onlinestudylist.com



Hi Waleed,
 
The question says - Users hqph2 and br1ph2 (mailbox users) press the Messages 
button and then press # to go get opening greeting. FROM THERE they should be 
able to dial extensions which do not have a mailbox on unity ie 5001,1001 etc.
Is that what you are trying to do ? Its not for users who dont have a mailbox
 
I have done this and it works everytime.
 
Thanks,
DA
 
 

 
2010/10/28 Waleed Elhadidy 


I already done that. Did you do it from user phone with mailbox ? It only works 
with users with no mailbox. Did anyone answer task 4.4 in lab 7 volume 2 ? Any 
one can assist me to solve this task. Clear steps will be more accurate. Please 
see my problem below:

 
Connection between cucm and unity connection is sip trunk. All CSSs of trunk 
contain partitions of phones. The issue is not with transferring. Users with no 
mailbox can be transferred to any number they dial during opening greeting, so 
problem is not with transferring. The problem is with users who have mailboxes. 
When I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). 
 
Thanks in advance
 
Regards,
 
Waleed
 



Date: Thu, 28 Oct 2010 18:43:09 +0800
From: vcc...@gmail.com
To: ccie_voice@onlinestudylist.com

Subject: Re: [OSL | CCIE_Voice] (no subject)



Under Restriction Table > Default System Transfer > Uncheck the "Blocked" 
checkbox for pattern *
 
It works for me
___ For more information regarding 
industry leading CCIE Lab training, please visit www.ipexpert.com 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[David A]

Hi Waleed,



The question says - Users hqph2 and br1ph2 (mailbox users) press the
Messages button and then press # to go get opening greeting. FROM THERE they
should be able to dial extensions which do not have a mailbox on unity ie
5001,1001 etc.

Is that what you are trying to do ? Its not for users who dont have a
mailbox



I have done this and it works everytime.



Thanks,

DA







2010/10/28 Waleed Elhadidy 

> I already done that. Did you do it from user phone with mailbox ? It only
> works with users with no mailbox. Did anyone answer task 4.4 in lab 7 volume
> 2 ? Any one can assist me to solve this task. Clear steps will be more
> accurate. Please see my problem below:
>
>
> Connection between cucm and unity connection is sip trunk. All CSSs of
> trunk contain partitions of phones. The issue is not with transferring.
> Users with no mailbox can be transferred to any number they dial during
> opening greeting, so problem is not with transferring. The problem is with
> users who have mailboxes. When I press the message button and login, I can't
> dial any number during the greeting. It says invalid entry. It only allows
> the predefined options of the greeting to choose from (eg. 1 for new
> messages, 2 to send messages,etc).
>
> Thanks in advance
>
> Regards,
>
> Waleed
>
>
> --
> Date: Thu, 28 Oct 2010 18:43:09 +0800
> From: vcc...@gmail.com
> To: ccie_voice@onlinestudylist.com
>
> Subject: Re: [OSL | CCIE_Voice] (no subject)
>
> Under Restriction Table > Default System Transfer > Uncheck the "Blocked"
> checkbox for pattern *
>
> It works for me
>
> ___ For more information
> regarding industry leading CCIE Lab training, please visit
> www.ipexpert.com
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

I already done that. Did you do it from user phone with mailbox ? It only works 
with users with no mailbox. Did anyone answer task 4.4 in lab 7 volume 2 ? Any 
one can assist me to solve this task. Clear steps will be more accurate. Please 
see my problem below:
 
Connection between cucm and unity connection is sip trunk. All CSSs of trunk 
contain partitions of phones. The issue is not with transferring. Users with no 
mailbox can be transferred to any number they dial during opening greeting, so 
problem is not with transferring. The problem is with users who have mailboxes. 
When I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). 
 
Thanks in advance
 
Regards,
 
Waleed
 



Date: Thu, 28 Oct 2010 18:43:09 +0800
From: vcc...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] (no subject)


Under Restriction Table > Default System Transfer > Uncheck the "Blocked" 
checkbox for pattern *
 
It works for me
___ For more information regarding 
industry leading CCIE Lab training, please visit www.ipexpert.com   
   ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[vcciev]

Under Restriction Table > Default System Transfer > Uncheck the "Blocked"
checkbox for pattern *

It works for me
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

I just want to add something else. The only way it works is when users with no 
mailbox dial UC because they are transferred to opening greeting system 
handler, unlike users with mailboxes are transferred to user phone menu.
 
Regards,
 
Waleed
 


From: walid...@hotmail.com
To: clmar...@bryantx.gov
CC: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] (no subject)
Date: Wed, 27 Oct 2010 16:05:30 +0200




I skipped pin when logging and tried pressing # then extension, but still 
didn't work. The phone menu of the user is what Iam transferred to after login, 
not opening greeting system handler. This means Iam only allowed to select 
options in phone menu -->Touchtone Conversation-->Classic Conversation.
 
Regards,
 
Waleed
 


From: clmar...@bryantx.gov
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Date: Wed, 27 Oct 2010 08:33:30 -0500
Subject: RE: [OSL | CCIE_Voice] (no subject)







Waleed,
 
Do not enter your password when prompted, just press # that should transfer you 
to the main greeting then you can dial a number.
 
Chris
 


From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Waleed Elhadidy
Sent: Wednesday, October 27, 2010 8:28 AM
To: prashantpatel...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] (no subject)
 
Hi Prashant,

Connection between cucm and unity connection is sip trunk. All CSSs of trunk 
contain partitions of phones. The issue is not with transferring. Users with no 
mailbox can be transferred to any number they dial during opening greeting, so 
problem is not with transferring. The problem is with users who have mailboxes. 
When I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). 
Any other ideas ?
 
Regards,
 
Waleed
 

 



Date: Wed, 27 Oct 2010 08:26:17 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: prashantpatel...@gmail.com
To: walid...@hotmail.com
CC: findko...@gmail.com; ccie_voice@onlinestudylist.com

Hi Waleed,

 

What is the pt and css you are using for the VM ports. They should be in none 
partition if you are doing any 4-digit internal number translations.

 

 

HTH

Prashant

2010/10/27 Waleed Elhadidy 

Hi,
 
Thanks for your tips. I already done the below requirements. What iam facing is 
when I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from. Any other ideas ?
 
Regards,
 
Waleed

 



From: findko...@gmail.com
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com




Hi,

you also need to adjust the default restriction table and configure proper CSS 
for the voicemail ports / SIP trunk (+contact line)

regards
kobel

2010/10/27 Waleed Elhadidy 

Hello Everyone,
 
Iam asked to configure unity connection to allow phones with mailbox to press 
message button and then can be transferred to any number during opening 
greeting. This can be done by callers with no mailbox but not ones with 
mailboxes. The solution guide solves this by checking "Allow Transfers to 
Numbers Not Associated with Users or Call Handlers "  in standard greeting of 
opening greeting system call handler. I tried this but didn't work. Any ideas ?
 
Regrads,
 
Waleed

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com
 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com
  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

yes I already checked "Allow Transfers to Numbers Not Associated with Users or 
Call Handlers ". The only keys locked is * and # which doesn't match any digits 
of extensions.
 
Regards,
 
Waleed
 


From: findko...@gmail.com
Date: Wed, 27 Oct 2010 15:41:10 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: prashantpatel...@gmail.com; ccie_voice@onlinestudylist.com

I assume you already have "Allow Transfers to Numbers Not Associated with Users 
or Call Handlers " option checked.

Make sure that in User Input for the call handler you don't have "locked" 
digits (that means, they don't prevent sending digit strings longer then 1 
digit)

regards
kobel


2010/10/27 Waleed Elhadidy 


Hi Prashant,

Connection between cucm and unity connection is sip trunk. All CSSs of trunk 
contain partitions of phones. The issue is not with transferring. Users with no 
mailbox can be transferred to any number they dial during opening greeting, so 
problem is not with transferring. The problem is with users who have mailboxes. 
When I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). 
Any other ideas ?
 
Regards,
 
Waleed
 

 


Date: Wed, 27 Oct 2010 08:26:17 -0400

Subject: Re: [OSL | CCIE_Voice] (no subject)
From: prashantpatel...@gmail.com

To: walid...@hotmail.com
CC: findko...@gmail.com; ccie_voice@onlinestudylist.com





Hi Waleed,
 
What is the pt and css you are using for the VM ports. They should be in none 
partition if you are doing any 4-digit internal number translations.
 
 
HTH
Prashant


2010/10/27 Waleed Elhadidy 


Hi,
 
Thanks for your tips. I already done the below requirements. What iam facing is 
when I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from. Any other ideas ?
 
Regards,
 
Waleed

 


From: findko...@gmail.com
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com




Hi,

you also need to adjust the default restriction table and configure proper CSS 
for the voicemail ports / SIP trunk (+contact line)

regards
kobel


2010/10/27 Waleed Elhadidy 


Hello Everyone,
 
Iam asked to configure unity connection to allow phones with mailbox to press 
message button and then can be transferred to any number during opening 
greeting. This can be done by callers with no mailbox but not ones with 
mailboxes. The solution guide solves this by checking "Allow Transfers to 
Numbers Not Associated with Users or Call Handlers "  in standard greeting of 
opening greeting system call handler. I tried this but didn't work. Any ideas ?
 
Regrads,
 
Waleed

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

I skipped pin when logging and tried pressing # then extension, but still 
didn't work. The phone menu of the user is what Iam transferred to after login, 
not opening greeting system handler. This means Iam only allowed to select 
options in phone menu -->Touchtone Conversation-->Classic Conversation.
 
Regards,
 
Waleed
 


From: clmar...@bryantx.gov
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Date: Wed, 27 Oct 2010 08:33:30 -0500
Subject: RE: [OSL | CCIE_Voice] (no subject)








Waleed,
 
Do not enter your password when prompted, just press # that should transfer you 
to the main greeting then you can dial a number.
 
Chris
 


From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Waleed Elhadidy
Sent: Wednesday, October 27, 2010 8:28 AM
To: prashantpatel...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] (no subject)
 
Hi Prashant,

Connection between cucm and unity connection is sip trunk. All CSSs of trunk 
contain partitions of phones. The issue is not with transferring. Users with no 
mailbox can be transferred to any number they dial during opening greeting, so 
problem is not with transferring. The problem is with users who have mailboxes. 
When I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). 
Any other ideas ?
 
Regards,
 
Waleed
 

 



Date: Wed, 27 Oct 2010 08:26:17 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: prashantpatel...@gmail.com
To: walid...@hotmail.com
CC: findko...@gmail.com; ccie_voice@onlinestudylist.com

Hi Waleed,

 

What is the pt and css you are using for the VM ports. They should be in none 
partition if you are doing any 4-digit internal number translations.

 

 

HTH

Prashant

2010/10/27 Waleed Elhadidy 

Hi,
 
Thanks for your tips. I already done the below requirements. What iam facing is 
when I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from. Any other ideas ?
 
Regards,
 
Waleed

 



From: findko...@gmail.com
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com




Hi,

you also need to adjust the default restriction table and configure proper CSS 
for the voicemail ports / SIP trunk (+contact line)

regards
kobel

2010/10/27 Waleed Elhadidy 

Hello Everyone,
 
Iam asked to configure unity connection to allow phones with mailbox to press 
message button and then can be transferred to any number during opening 
greeting. This can be done by callers with no mailbox but not ones with 
mailboxes. The solution guide solves this by checking "Allow Transfers to 
Numbers Not Associated with Users or Call Handlers "  in standard greeting of 
opening greeting system call handler. I tried this but didn't work. Any ideas ?
 
Regrads,
 
Waleed

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com
 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com
  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Miron Kobelski]

I assume you already have "Allow Transfers to Numbers Not Associated with
Users or Call Handlers " option checked.

Make sure that in User Input for the call handler you don't have "locked"
digits (that means, they don't prevent sending digit strings longer then 1
digit)

regards
kobel

2010/10/27 Waleed Elhadidy 

>  Hi Prashant,
>
> Connection between cucm and unity connection is sip trunk. All CSSs of
> trunk contain partitions of phones. The issue is not with transferring.
> Users with no mailbox can be transferred to any number they dial during
> opening greeting, so problem is not with transferring. The problem is with
> users who have mailboxes. When I press the message button and login, I can't
> dial any number during the greeting. It says invalid entry. It only allows
> the predefined options of the greeting to choose from (eg. 1 for new
> messages, 2 to send messages,etc). Any other ideas ?
>
> Regards,
>
> Waleed
>
>
>
> ------------------
> Date: Wed, 27 Oct 2010 08:26:17 -0400
>
> Subject: Re: [OSL | CCIE_Voice] (no subject)
> From: prashantpatel...@gmail.com
>
> To: walid...@hotmail.com
> CC: findko...@gmail.com; ccie_voice@onlinestudylist.com
>
>
> Hi Waleed,
>
> What is the pt and css you are using for the VM ports. They should be in
> none partition if you are doing any 4-digit internal number translations.
>
>
> HTH
> Prashant
>
> 2010/10/27 Waleed Elhadidy 
>
> Hi,
>
> Thanks for your tips. I already done the below requirements. What iam
> facing is when I press the message button and login, I can't dial any number
> during the greeting. It says invalid entry. It only allows the predefined
> options of the greeting to choose from. Any other ideas ?
>
> Regards,
>
> Waleed
>
> --
> From: findko...@gmail.com
> Date: Wed, 27 Oct 2010 12:43:14 +0200
> Subject: Re: [OSL | CCIE_Voice] (no subject)
> To: walid...@hotmail.com
> CC: ccie_voice@onlinestudylist.com
>
>
> Hi,
>
> you also need to adjust the default restriction table and configure proper
> CSS for the voicemail ports / SIP trunk (+contact line)
>
> regards
> kobel
>
> 2010/10/27 Waleed Elhadidy 
>
> Hello Everyone,
>
> Iam asked to configure unity connection to allow phones with mailbox to
> press message button and then can be transferred to any number during
> opening greeting. This can be done by callers with no mailbox but not ones
> with mailboxes. The solution guide solves this by checking "Allow Transfers
> to Numbers Not Associated with Users or Call Handlers "  in standard
> greeting of opening greeting system call handler. I tried this but didn't
> work. Any ideas ?
>
> Regrads,
>
> Waleed
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Shrini]

On 10/27/2010 6:28 AM, Waleed Elhadidy wrote:

Hi Prashant,

Connection between cucm and unity connection is sip trunk. All CSSs of 
trunk contain partitions of phones. The issue is not with 
transferring. Users with no mailbox can be transferred to any number 
they dial during opening greeting, so problem is not with 
transferring. The problem is with users who have mailboxes. When I 
press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options 
of the greeting to choose from (eg. 1 for new messages, 2 to send 
messages,etc). Any other ideas ?


Regards,

Waleed




Date: Wed, 27 Oct 2010 08:26:17 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: prashantpatel...@gmail.com
To: walid...@hotmail.com
CC: findko...@gmail.com; ccie_voice@onlinestudylist.com

Hi Waleed,
What is the pt and css you are using for the VM ports. They should be 
in none partition if you are doing any 4-digit internal number 
translations.

HTH
Prashant

2010/10/27 Waleed Elhadidy <mailto:walid...@hotmail.com>>


Hi,

Thanks for your tips. I already done the below requirements. What
iam facing is when I press the message button and login, I can't
dial any number during the greeting. It says invalid entry. It
only allows the predefined options of the greeting to choose from.
Any other ideas ?

Regards,

Waleed


From: findko...@gmail.com <mailto:findko...@gmail.com>
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com <mailto:walid...@hotmail.com>
CC: ccie_voice@onlinestudylist.com
<mailto:ccie_voice@onlinestudylist.com>


Hi,

you also need to adjust the default restriction table and
configure proper CSS for the voicemail ports / SIP trunk (+contact
line)

regards
kobel

2010/10/27 Waleed Elhadidy mailto:walid...@hotmail.com>>

Hello Everyone,

Iam asked to configure unity connection to allow phones with
mailbox to press message button and then can be transferred to
any number during opening greeting. This can be done by
callers with no mailbox but not ones with mailboxes. The
solution guide solves this by checking "Allow Transfers to
Numbers Not Associated with Users or Call Handlers "  in
standard greeting of opening greeting system call handler. I
tried this but didn't work. Any ideas ?

Regrads,

Waleed

___
For more information regarding industry leading CCIE Lab
training, please visit www.ipexpert.com <http://www.ipexpert.com/>



___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com <http://www.ipexpert.com/>



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Hi Waleed,
Try checking "Self enrollment at next login" for one affected user, see 
what happens.


Thanks
Shrini
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

Hi Prashant,

Connection between cucm and unity connection is sip trunk. All CSSs of trunk 
contain partitions of phones. The issue is not with transferring. Users with no 
mailbox can be transferred to any number they dial during opening greeting, so 
problem is not with transferring. The problem is with users who have mailboxes. 
When I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). 
Any other ideas ?
 
Regards,
 
Waleed
 

 


Date: Wed, 27 Oct 2010 08:26:17 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: prashantpatel...@gmail.com
To: walid...@hotmail.com
CC: findko...@gmail.com; ccie_voice@onlinestudylist.com


Hi Waleed,
 
What is the pt and css you are using for the VM ports. They should be in none 
partition if you are doing any 4-digit internal number translations.
 
 
HTH
Prashant


2010/10/27 Waleed Elhadidy 


Hi,
 
Thanks for your tips. I already done the below requirements. What iam facing is 
when I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from. Any other ideas ?
 
Regards,
 
Waleed

 


From: findko...@gmail.com
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com




Hi,

you also need to adjust the default restriction table and configure proper CSS 
for the voicemail ports / SIP trunk (+contact line)

regards
kobel


2010/10/27 Waleed Elhadidy 


Hello Everyone,
 
Iam asked to configure unity connection to allow phones with mailbox to press 
message button and then can be transferred to any number during opening 
greeting. This can be done by callers with no mailbox but not ones with 
mailboxes. The solution guide solves this by checking "Allow Transfers to 
Numbers Not Associated with Users or Call Handlers "  in standard greeting of 
opening greeting system call handler. I tried this but didn't work. Any ideas ?
 
Regrads,
 
Waleed

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Prashant Patel]

Hi Waleed,

What is the pt and css you are using for the VM ports. They should be in
none partition if you are doing any 4-digit internal number translations.


HTH
Prashant

2010/10/27 Waleed Elhadidy 

> Hi,
>
> Thanks for your tips. I already done the below requirements. What iam
> facing is when I press the message button and login, I can't dial any number
> during the greeting. It says invalid entry. It only allows the predefined
> options of the greeting to choose from. Any other ideas ?
>
> Regards,
>
> Waleed
>
> --
> From: findko...@gmail.com
> Date: Wed, 27 Oct 2010 12:43:14 +0200
> Subject: Re: [OSL | CCIE_Voice] (no subject)
> To: walid...@hotmail.com
> CC: ccie_voice@onlinestudylist.com
>
>
> Hi,
>
> you also need to adjust the default restriction table and configure proper
> CSS for the voicemail ports / SIP trunk (+contact line)
>
> regards
> kobel
>
> 2010/10/27 Waleed Elhadidy 
>
> Hello Everyone,
>
> Iam asked to configure unity connection to allow phones with mailbox to
> press message button and then can be transferred to any number during
> opening greeting. This can be done by callers with no mailbox but not ones
> with mailboxes. The solution guide solves this by checking "Allow Transfers
> to Numbers Not Associated with Users or Call Handlers "  in standard
> greeting of opening greeting system call handler. I tried this but didn't
> work. Any ideas ?
>
> Regrads,
>
> Waleed
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

Hi,
 
Thanks for your tips. I already done the below requirements. What iam facing is 
when I press the message button and login, I can't dial any number during the 
greeting. It says invalid entry. It only allows the predefined options of the 
greeting to choose from. Any other ideas ?
 
Regards,
 
Waleed
 


From: findko...@gmail.com
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com

Hi,

you also need to adjust the default restriction table and configure proper CSS 
for the voicemail ports / SIP trunk (+contact line)

regards
kobel


2010/10/27 Waleed Elhadidy 


Hello Everyone,
 
Iam asked to configure unity connection to allow phones with mailbox to press 
message button and then can be transferred to any number during opening 
greeting. This can be done by callers with no mailbox but not ones with 
mailboxes. The solution guide solves this by checking "Allow Transfers to 
Numbers Not Associated with Users or Call Handlers "  in standard greeting of 
opening greeting system call handler. I tried this but didn't work. Any ideas ?
 
Regrads,
 
Waleed

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Miron Kobelski]

Hi,

you also need to adjust the default restriction table and configure proper
CSS for the voicemail ports / SIP trunk (+contact line)

regards
kobel

2010/10/27 Waleed Elhadidy 

>  Hello Everyone,
>
> Iam asked to configure unity connection to allow phones with mailbox to
> press message button and then can be transferred to any number during
> opening greeting. This can be done by callers with no mailbox but not ones
> with mailboxes. The solution guide solves this by checking "Allow Transfers
> to Numbers Not Associated with Users or Call Handlers "  in standard
> greeting of opening greeting system call handler. I tried this but didn't
> work. Any ideas ?
>
> Regrads,
>
> Waleed
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Waleed Elhadidy]

Hello Everyone,
 
Iam asked to configure unity connection to allow phones with mailbox to press 
message button and then can be transferred to any number during opening 
greeting. This can be done by callers with no mailbox but not ones with 
mailboxes. The solution guide solves this by checking "Allow Transfers to 
Numbers Not Associated with Users or Call Handlers "  in standard greeting of 
opening greeting system call handler. I tried this but didn't work. Any ideas ?
 
Regrads,
 
Waleed___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Bhushan Paranjape]

Hi,
 
In PL WB 1 Lab 6 and onwards in the config tasks -prerequisites I see a NOTE:
If you are using your own hw cisco 7961 phones instead of 7962 phones, please 
perform the following: first delete all 7962 phones and then run the BAT tool 
for phone install. We have laready preprovisioned a file that you simply need 
to import (and change MAC add) containing the 7961 phones types.
 
My question is where do I find this file to import? I am not getting any 
response from ipexpert support team on this. Currently I just delete the 7962s 
and add my 7961s.
 
Pls advise
 
Thanks,
 
Bhushan.


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Pithog Oil]

 
 
What type of phones are you using for this scenario? the anormally you have 
just mentioned is what i get when using softphones for IPMA.
 
Pithog oil


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[bmaxim]

http://www.divittoeditore.com/und9.html


  
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[amr thabt]

I face the same for about 45 minutes

On Thu, Sep 9, 2010 at 7:03 PM, chase mergenthal wrote:

> Can anyone get to http://proctorlabs.com? I'm in the middle of my lab...
> and its down :-(
>
> -Chase
>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[chase mergenthal]

Can anyone get to http://proctorlabs.com? I'm in the middle of my lab... and 
its down :-(

-Chase




 

  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Stuart Geoghegan]

http://ogizujyny.freecities.com/sulygupe.html


  
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Trevor Peddle]

Apologies everyone, I sent my request to the wrong email, should have been 
to ccie_rs-requ...@onlinestudylist.com  as I want to change my subscription 
options.
 
However I have felt like sending a general request for "help" during my 
studies. 
;o)
 
The good news is that I finally passed the lab, the same week as the 2 
Matthew's 
I think, so a big thank you to everyone and stay with it those who have not 
crossed the line yet as it is a very satisfying place to be.
 
I have not really been a major contributor to this this list but used it more 
for reference as I concentrated on other sources for my study and preperation.
 
I have had a family break since passing and look forward to spending more time 
with them now.
 
Thanks
 
Trevor Peddle
CCIE #26723 (Voice)
 
 

 




From: Amp 
To: Sam Park 
Cc: ccie_voice@onlinestudylist.com
Sent: Thu, 2 September, 2010 2:32:30
Subject: Re: [OSL | CCIE_Voice] (no subject)

I think I'm going to go to the doctor and just yell, "Ouch!". Hahaha  
naa all joking aside, I know what you mean.

Quoting Sam Park :

> This is like one of those instances when a person's mind is so fried that
> only the basic primal pleas escape from a person's lips.  In this case,
> through the keyboard and into an e-mail.
>
> Sam Park
>
> On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror  
> wrote:
>
>> "Help".. pretty much sums up my whole lab preparation.
>>
>>
>> On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi  wrote:
>>
>>>  Can you be a little bit more specific detailing the problem? Thanks:-)
>>> --
>>> Vik Malhi ? CCIE #13890
>>> Managing Partner / Instructor - IPexpert, Inc.
>>> Mailto: *vma...@ipexpert.com
>>> *Telephone: +1.810.326.1444 ext 420
>>> Fax: +1.810.454.0130
>>> Live Assistance, Please visit: www.ipexpert.com/chat <*
>>> http://www.ipexpert.com/chat*>
>>>
>>> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
>>> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
>>> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
>>> training locations throughout the United States, Europe, South Asia and
>>> Australia. Be sure to visit our online communities at
>>> www.ipexpert.com/communities <*http://www.ipexpert.com/communities*>  and
>>> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>>>
>>>
>>>
>>> --
>>> *From: *Trevor Peddle 
>>> *Date: *Wed, 1 Sep 2010 21:28:10 + (GMT)
>>> *To: *OSL Group 
>>> *Subject: *[OSL | CCIE_Voice] (no subject)
>>>
>>> help
>>>
>>>
>>> --
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Amp]

I think I'm going to go to the doctor and just yell, "Ouch!". Hahaha  
naa all joking aside, I know what you mean.


Quoting Sam Park :


This is like one of those instances when a person's mind is so fried that
only the basic primal pleas escape from a person's lips.  In this case,
through the keyboard and into an e-mail.

Sam Park

On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror   
wrote:



"Help".. pretty much sums up my whole lab preparation.


On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi  wrote:


 Can you be a little bit more specific detailing the problem? Thanks:-)
--
Vik Malhi ? CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: *vma...@ipexpert.com
*Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Live Assistance, Please visit: www.ipexpert.com/chat <*
http://www.ipexpert.com/chat*>

IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
CCIE (R&S, Voice, Security & Service Provider) certification(s) with
training locations throughout the United States, Europe, South Asia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities <*http://www.ipexpert.com/communities*>  and
our public website at www.ipexpert.com <*http://www.ipexpert.com/*>



--
*From: *Trevor Peddle 
*Date: *Wed, 1 Sep 2010 21:28:10 +0000 (GMT)
*To: *OSL Group 
*Subject: *[OSL | CCIE_Voice] (no subject)

help


--
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com




___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com








___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Sam Park]

This is like one of those instances when a person's mind is so fried that
only the basic primal pleas escape from a person's lips.  In this case,
through the keyboard and into an e-mail.

Sam Park

On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror wrote:

> "Help".. pretty much sums up my whole lab preparation.
>
>
> On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi  wrote:
>
>>  Can you be a little bit more specific detailing the problem? Thanks:-)
>> --
>> Vik Malhi – CCIE #13890
>> Managing Partner / Instructor - IPexpert, Inc.
>> Mailto: *vma...@ipexpert.com
>> *Telephone: +1.810.326.1444 ext 420
>> Fax: +1.810.454.0130
>> Live Assistance, Please visit: www.ipexpert.com/chat <*
>> http://www.ipexpert.com/chat*>
>>
>> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
>> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
>> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
>> training locations throughout the United States, Europe, South Asia and
>> Australia. Be sure to visit our online communities at
>> www.ipexpert.com/communities <*http://www.ipexpert.com/communities*>  and
>> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>>
>>
>>
>> --
>> *From: *Trevor Peddle 
>> *Date: *Wed, 1 Sep 2010 21:28:10 + (GMT)
>> *To: *OSL Group 
>> *Subject: *[OSL | CCIE_Voice] (no subject)
>>
>> help
>>
>>
>> --
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[rearviewmirror]

"Help".. pretty much sums up my whole lab preparation.

On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi  wrote:

>  Can you be a little bit more specific detailing the problem? Thanks:-)
> --
> Vik Malhi – CCIE #13890
> Managing Partner / Instructor - IPexpert, Inc.
> Mailto: *vma...@ipexpert.com
> *Telephone: +1.810.326.1444 ext 420
> Fax: +1.810.454.0130
> Live Assistance, Please visit: www.ipexpert.com/chat <*
> http://www.ipexpert.com/chat*>
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> training locations throughout the United States, Europe, South Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities <*http://www.ipexpert.com/communities*>  and
> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>
>
>
> --
> *From: *Trevor Peddle 
> *Date: *Wed, 1 Sep 2010 21:28:10 + (GMT)
> *To: *OSL Group 
> *Subject: *[OSL | CCIE_Voice] (no subject)
>
> help
>
>
> --
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Vik Malhi]

Can you be a little bit more specific detailing the problem? Thanks:-)
-- 
Vik Malhi ­ CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Live Assistance, Please visit: www.ipexpert.com/chat
<http://www.ipexpert.com/chat>

IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
CCIE (R&S, Voice, Security & Service Provider) certification(s) with
training locations throughout the United States, Europe, South Asia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities <http://www.ipexpert.com/communities>  and our
public website at www.ipexpert.com <http://www.ipexpert.com/>




From: Trevor Peddle 
Date: Wed, 1 Sep 2010 21:28:10 + (GMT)
To: OSL Group 
Subject: [OSL | CCIE_Voice] (no subject)

help

 

___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Trevor Peddle]

help


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject) IP address Edit On IP Phone.

[Ashar Siddiqui]

Go to DHCP option on the phone, press **#** and then disable it first as 
it is enabled by default and won't allow you to change settings of TFTP 
or IP.


Ash>

On 02/04/2010 11:14, asif raza wrote:

U mean "DHCP Server" Option on IP Phone Setting??

Best Regards
**
*Asif Raza
*




From: esa...@sigma-it.net
To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] (no subject)
Date: Fri, 2 Apr 2010 10:36:16 +0200

Go to DHCP settings and make it Manual First.

*From:* asif raza [mailto:asifraz...@hotmail.com]
*Sent:* Friday, April 02, 2010 9:18 AM
*To:* CCIE-Voice
*Subject:* [OSL | CCIE_Voice] (no subject)

Dear Friends

I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go 
to Setting and and press **# to unlock phone setting, It do unlocl 
phone setting but when I go to IP Address section, The Edit Soft key 
appears but it is disabled.

 Any Idea how edit IP address in this scnario?? plz...

Best Regards

*Asif*



The New Busy is not the old busy. Search, chat and e-mail from your 
inbox. Get started. 
<http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3>




The New Busy think 9 to 5 is a cute idea. Combine multiple calendars 
with Hotmail. Get busy. 
<http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5> 




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com
   



--
Thanks,
Ashar Siddiqui

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject) IP address Edit On IP Phone.

[asif raza]

U mean "DHCP Server" Option on IP Phone Setting??


Best Regards 
 
Asif Raza


 



From: esa...@sigma-it.net
To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] (no subject)
Date: Fri, 2 Apr 2010 10:36:16 +0200







Go to DHCP settings and make it Manual First.

 
 


From: asif raza [mailto:asifraz...@hotmail.com] 
Sent: Friday, April 02, 2010 9:18 AM
To: CCIE-Voice
Subject: [OSL | CCIE_Voice] (no subject)
 
Dear Friends
 
I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting 
and and press **# to unlock phone setting, It do unlocl phone setting but when 
I go to IP Address section, The Edit Soft key appears but it is disabled.
 Any Idea how edit IP address in this scnario?? plz...

Best Regards 

 

Asif
 



The New Busy is not the old busy. Search, chat and e-mail from your inbox. Get 
started.   
_
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with 
Hotmail. 
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Ehab Salem]

Go to DHCP settings and make it Manual First.

 

 

From: asif raza [mailto:asifraz...@hotmail.com] 
Sent: Friday, April 02, 2010 9:18 AM
To: CCIE-Voice
Subject: [OSL | CCIE_Voice] (no subject)

 

Dear Friends
 
I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to
Setting and and press **# to unlock phone setting, It do unlocl phone
setting but when I go to IP Address section, The Edit Soft key appears but
it is disabled.
 Any Idea how edit IP address in this scnario?? plz...

Best Regards 

 

Asif

 

  _  

The New Busy is not the old busy. Search, chat and e-mail from your inbox.
Get started.
<http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:
WL:en-US:WM_HMP:042010_3> 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[asif raza]

Dear Friends

 

I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting 
and and press **# to unlock phone setting, It do unlocl phone setting but when 
I go to IP Address section, The Edit Soft key appears but it is disabled.

 Any Idea how edit IP address in this scnario?? plz...


Best Regards 

 
Asif

  
_
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[mthompson729]

well apparently I'm not sure :)

if they have something like call viewer, I'll be like a kid in a candy shop.

On Mar 19, 2010 7:36am, Graham Hopkins  wrote:

Mike,







are you sure ?







See







http://ciscounitytools.com/Applications/CxN/PortStatusMonitorCUC7x/PortStatusMonitorCUC7x.html







I have this running with UC













Regards







Graham Hopkins













On 19 Mar 2010, at 11:07, Mike Thompson wrote:






> He's talking about UC and not Unity. There's no port status monitor in  
UC which is REAL disappointing.




>




> Sent from my phone, apologies for any typos.




>



> On Mar 19, 2010, at 6:37 AM, Graham Hopkins ghopk...@wolf-rock.co.uk>  
wrote:




>




>> Also worth taking a look at




>>




>> http://ciscounitytools.com/index.html




>>



>> the port status monitor there is pretty good - as are most of the  
other tools




>> Ryan Schwab schwab...@shaw.ca>




>>




>>




>>




>> Regards




>>




>> Graham Hopkins




>>




>>




>>




>> On 19 Mar 2010, at 04:49, Ryan Schwab wrote:




>>




>>> Hi Jean,




>>>




>>> Yes, the RTMT is definitely what you need.




>>>




>>>




>>> -Original Message-




>>> From: ccie_voice-boun...@onlinestudylist.com




>>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.




>>> Thewissen




>>> Sent: March-18-10 10:07 PM




>>> To: ccie_voice@onlinestudylist.com




>>> Subject: [OSL | CCIE_Voice] (no subject)




>>>




>>> Anyone can point me to the best way to monitor unity connection ports?




>>> I need to see info like dnis, rdnis and the like when a call comes in.




>>> Is RTMT the right tool for this?




>>>




>>> Thx!




>>>




>>>




>>> ___



>>> For more information regarding industry leading CCIE Lab training,  
please




>>> visit www.ipexpert.com




>>>




>>> ___



>>> For more information regarding industry leading CCIE Lab training,  
please visit www.ipexpert.com




>>




>> ___



>> For more information regarding industry leading CCIE Lab training,  
please visit www.ipexpert.com







___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Graham Hopkins]

Mike,

are you sure ?  

See 

http://ciscounitytools.com/Applications/CxN/PortStatusMonitorCUC7x/PortStatusMonitorCUC7x.html

I have this running with UC



Regards

Graham Hopkins



On 19 Mar 2010, at 11:07, Mike Thompson wrote:

> He's talking about UC and not Unity.  There's no port status monitor in UC 
> which is REAL disappointing.
> 
> Sent from my phone, apologies for any typos.
> 
> On Mar 19, 2010, at 6:37 AM, Graham Hopkins  wrote:
> 
>> Also worth taking a look at
>> 
>> http://ciscounitytools.com/index.html
>> 
>> the port status monitor there is pretty good - as are most of the other tools
>> Ryan Schwab 
>> 
>> 
>> 
>> Regards
>> 
>> Graham Hopkins
>> 
>> 
>> 
>> On 19 Mar 2010, at 04:49, Ryan Schwab wrote:
>> 
>>> Hi Jean,
>>> 
>>> Yes, the RTMT is definitely what you need.
>>> 
>>> 
>>> -Original Message-
>>> From: ccie_voice-boun...@onlinestudylist.com
>>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
>>> Thewissen
>>> Sent: March-18-10 10:07 PM
>>> To: ccie_voice@onlinestudylist.com
>>> Subject: [OSL | CCIE_Voice] (no subject)
>>> 
>>> Anyone can point me to the best way to monitor unity connection ports?
>>> I need to see info like dnis, rdnis and the like when a call comes in.
>>> Is RTMT the right tool for this?
>>> 
>>> Thx!
>>> 
>>> 
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>> 
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please 
>>> visit www.ipexpert.com
>> 
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Graham Hopkins]

Also worth taking a look at 

http://ciscounitytools.com/index.html

the port status monitor there is pretty good - as are most of the other tools 
Ryan Schwab 



Regards

Graham Hopkins



On 19 Mar 2010, at 04:49, Ryan Schwab wrote:

> Hi Jean,
> 
> Yes, the RTMT is definitely what you need.
> 
> 
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
> Thewissen
> Sent: March-18-10 10:07 PM
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] (no subject)
> 
> Anyone can point me to the best way to monitor unity connection ports?  
> I need to see info like dnis, rdnis and the like when a call comes in.
> Is RTMT the right tool for this?
> 
> Thx!
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Ryan Schwab]

Hi Jean,

Yes, the RTMT is definitely what you need.


-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
Thewissen
Sent: March-18-10 10:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)

Anyone can point me to the best way to monitor unity connection ports?  
I need to see info like dnis, rdnis and the like when a call comes in.
Is RTMT the right tool for this?

Thx!


___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Jean M. Thewissen]

Anyone can point me to the best way to monitor unity connection ports?  
I need to see info like dnis, rdnis and the like when a call comes in.
Is RTMT the right tool for this?

Thx!


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Jefferson Wilson]

I am up on pod 14 and things are ok.  Try just reloading the turning on
and off the equipment that won't load for you.  Also on of  the Volume 2
labs was mislabaled.  Try loading the "Final" config and see what
results you get.

 

Jefferson

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Roger Källberg]

Right, redistribution can wreck havoc in you network if not carefully 
considered. :-)
Your right about that MGCP needs to lose connection to all UCM's, but that will 
be taken care of if you put the routes to dev null on your egress gw, ie the 
last hop for the network were the VGW reside. Or on the remote sites last hop 
before leaving the LAN and entering the WAN. That is if you have the control of 
that box, if not this could be hard to achieve.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Mark Nigh [mn...@netelligent.com]
Skickat: den 11 februari 2010 19:22
Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; 
dle...@ipexpert.com
Ämne: RE: [OSL | CCIE_Voice] (no subject)

Good idea. One gotcha, if you are redistributing static routes, you can 
actually take down all remote locations as this route will advertise out to all 
locations. This happen to me once, ouch.

With MGCP, the gateway will need to go into SRST to test outbound calls or the 
phones will fallback but outbound and inbound calls will not.

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAAB14.E76B6070]<http://www.netelligent.com/>

From: Roger Källberg [mailto:roger.kallb...@cygate.se]
Sent: Thursday, February 11, 2010 12:20 PM
To: Mark Nigh; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: SV: [OSL | CCIE_Voice] (no subject)

That's the way that I usually do it anyway, for example I did it last week for 
a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST 
functionality. I was sitting at home, helped them out during a study break.
It's actually the phones that fails over, not the VGW. It has no idée of SRST 
or not. If it is a MGCP VGW then it will of course be aware of that it has lost 
the connection to the UCM, but it will still not have any clue of SRST. It's 
the phones that notice that they have lost the connection to first the primary 
UCM, then secondary, then tertiary then finally it will fail over to the SRST 
reference.

Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Mark Nigh [mn...@netelligent.com]
Skickat: den 11 februari 2010 18:23
Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; 
dle...@ipexpert.com
Ämne: RE: [OSL | CCIE_Voice] (no subject)
Will this place the gateway in fallback? I am assuming if the gateway is 
registered as any interface other than the WAN interface?

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAAB14.E76B6070]<http://www.netelligent.com/>

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg
Sent: Thursday, February 11, 2010 11:03 AM
To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] (no subject)

You can put in two host routes that points the traffic destinated to the UCM 
servers to dev null. That would also make the phones to fall over to SRST.

Like this

ip route 10.10.210.10 255.255.255.255 null0
ip route 10.10.210.11 255.255.255.255 null0


Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Nish Tarpara [nishi...@hotmail.com]
Skickat: den 11 februari 2010 12:59
Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Ämne: Re: [OSL | CCIE_Voice] (no subject)
Hi,

Just wanted to confirm with my last email that on my last session, i did tried 
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,

I will try to check it again today.
Regards,

Nish Tarpara



From: nishi...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 11 Feb 2010 10:46:39 +
Subject: [OSL | CCIE_Voice] (no subject)

Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.
Regards,

Nish Tarpara


We want to hear all your funny, exciting and crazy Hotmail stories. Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>

Do you have a story that started on Hotmail? Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>


This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copy

Re: [OSL | CCIE_Voice] (no subject)

[Mark Nigh]

Good idea. One gotcha, if you are redistributing static routes, you can 
actually take down all remote locations as this route will advertise out to all 
locations. This happen to me once, ouch.

With MGCP, the gateway will need to go into SRST to test outbound calls or the 
phones will fallback but outbound and inbound calls will not.

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAAB14.E76B6070]<http://www.netelligent.com/>

From: Roger Källberg [mailto:roger.kallb...@cygate.se]
Sent: Thursday, February 11, 2010 12:20 PM
To: Mark Nigh; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: SV: [OSL | CCIE_Voice] (no subject)

That's the way that I usually do it anyway, for example I did it last week for 
a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST 
functionality. I was sitting at home, helped them out during a study break.
It's actually the phones that fails over, not the VGW. It has no idée of SRST 
or not. If it is a MGCP VGW then it will of course be aware of that it has lost 
the connection to the UCM, but it will still not have any clue of SRST. It's 
the phones that notice that they have lost the connection to first the primary 
UCM, then secondary, then tertiary then finally it will fail over to the SRST 
reference.

Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Mark Nigh [mn...@netelligent.com]
Skickat: den 11 februari 2010 18:23
Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; 
dle...@ipexpert.com
Ämne: RE: [OSL | CCIE_Voice] (no subject)
Will this place the gateway in fallback? I am assuming if the gateway is 
registered as any interface other than the WAN interface?

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAAB14.E76B6070]<http://www.netelligent.com/>

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg
Sent: Thursday, February 11, 2010 11:03 AM
To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] (no subject)

You can put in two host routes that points the traffic destinated to the UCM 
servers to dev null. That would also make the phones to fall over to SRST.

Like this

ip route 10.10.210.10 255.255.255.255 null0
ip route 10.10.210.11 255.255.255.255 null0


Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Nish Tarpara [nishi...@hotmail.com]
Skickat: den 11 februari 2010 12:59
Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Ämne: Re: [OSL | CCIE_Voice] (no subject)
Hi,

Just wanted to confirm with my last email that on my last session, i did tried 
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,

I will try to check it again today.
Regards,

Nish Tarpara



From: nishi...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 11 Feb 2010 10:46:39 +
Subject: [OSL | CCIE_Voice] (no subject)

Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.
Regards,

Nish Tarpara


We want to hear all your funny, exciting and crazy Hotmail stories. Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>

Do you have a story that started on Hotmail? Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>


This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptly destroy the original transmission and its 
attachments.


This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptl

Re: [OSL | CCIE_Voice] (no subject)

[Roger Källberg]

That's the way that I usually do it anyway, for example I did it last week for 
a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST 
functionality. I was sitting at home, helped them out during a study break.
It's actually the phones that fails over, not the VGW. It has no idée of SRST 
or not. If it is a MGCP VGW then it will of course be aware of that it has lost 
the connection to the UCM, but it will still not have any clue of SRST. It's 
the phones that notice that they have lost the connection to first the primary 
UCM, then secondary, then tertiary then finally it will fail over to the SRST 
reference.

Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Mark Nigh [mn...@netelligent.com]
Skickat: den 11 februari 2010 18:23
Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; 
dle...@ipexpert.com
Ämne: RE: [OSL | CCIE_Voice] (no subject)

Will this place the gateway in fallback? I am assuming if the gateway is 
registered as any interface other than the WAN interface?

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAAB0C.AE6348E0]<http://www.netelligent.com/>

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg
Sent: Thursday, February 11, 2010 11:03 AM
To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] (no subject)

You can put in two host routes that points the traffic destinated to the UCM 
servers to dev null. That would also make the phones to fall over to SRST.

Like this

ip route 10.10.210.10 255.255.255.255 null0
ip route 10.10.210.11 255.255.255.255 null0


Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Nish Tarpara [nishi...@hotmail.com]
Skickat: den 11 februari 2010 12:59
Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Ämne: Re: [OSL | CCIE_Voice] (no subject)
Hi,

Just wanted to confirm with my last email that on my last session, i did tried 
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,

I will try to check it again today.
Regards,

Nish Tarpara





From: nishi...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 11 Feb 2010 10:46:39 +
Subject: [OSL | CCIE_Voice] (no subject)

Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.
Regards,

Nish Tarpara




We want to hear all your funny, exciting and crazy Hotmail stories. Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>

Do you have a story that started on Hotmail? Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>


This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptly destroy the original transmission and its 
attachments.
<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Mark Nigh]

Will this place the gateway in fallback? I am assuming if the gateway is 
registered as any interface other than the WAN interface?

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAAB0C.AE6348E0]<http://www.netelligent.com/>

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg
Sent: Thursday, February 11, 2010 11:03 AM
To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] (no subject)

You can put in two host routes that points the traffic destinated to the UCM 
servers to dev null. That would also make the phones to fall over to SRST.

Like this

ip route 10.10.210.10 255.255.255.255 null0
ip route 10.10.210.11 255.255.255.255 null0


Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Nish Tarpara [nishi...@hotmail.com]
Skickat: den 11 februari 2010 12:59
Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Ämne: Re: [OSL | CCIE_Voice] (no subject)
Hi,

Just wanted to confirm with my last email that on my last session, i did tried 
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,

I will try to check it again today.
Regards,

Nish Tarpara





From: nishi...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 11 Feb 2010 10:46:39 +0000
Subject: [OSL | CCIE_Voice] (no subject)

Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.
Regards,

Nish Tarpara




We want to hear all your funny, exciting and crazy Hotmail stories. Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>

Do you have a story that started on Hotmail? Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>


This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptly destroy the original transmission and its 
attachments.
<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Roger Källberg]

You can put in two host routes that points the traffic destinated to the UCM 
servers to dev null. That would also make the phones to fall over to SRST.

Like this

ip route 10.10.210.10 255.255.255.255 null0
ip route 10.10.210.11 255.255.255.255 null0


Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ

Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se<mailto:roger.kallb...@cygate.se>

Från: Nish Tarpara [nishi...@hotmail.com]
Skickat: den 11 februari 2010 12:59
Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Ämne: Re: [OSL | CCIE_Voice] (no subject)

Hi,

Just wanted to confirm with my last email that on my last session, i did tried 
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,

I will try to check it again today.

Regards,

Nish Tarpara







From: nishi...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 11 Feb 2010 10:46:39 +
Subject: [OSL | CCIE_Voice] (no subject)

Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.

Regards,

Nish Tarpara






We want to hear all your funny, exciting and crazy Hotmail stories. Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>

Do you have a story that started on Hotmail? Tell us 
now<http://clk.atdmt.com/UKM/go/195013117/direct/01/>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Aman Chugh]

You can use acl to test SRST.

Regards,
Aman

On Thu, Feb 11, 2010 at 8:26 AM, Arun Kumar  wrote:

> just simply stop ccm service.
>
>
>   On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara wrote:
>
>>   Hi,
>>
>> With regards to SRST teting on remote lab, please advice me how to test it
>> by remote ip phones connected via Ezvpn.
>>
>> Regards,
>>
>> Nish Tarpara
>>
>>
>>
>>
>>
>> --
>> We want to hear all your funny, exciting and crazy Hotmail stories. Tell
>> us now 
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Arun Kumar]

just simply stop ccm service.


On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara  wrote:

>  Hi,
>
> With regards to SRST teting on remote lab, please advice me how to test it
> by remote ip phones connected via Ezvpn.
>
> Regards,
>
> Nish Tarpara
>
>
>
>
>
> --
> We want to hear all your funny, exciting and crazy Hotmail stories. Tell
> us now 
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Nish Tarpara]

Hi,

Just wanted to confirm with my last email that on my last session, i did tried 
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,

I will try to check it again today.


Regards,

 

Nish Tarpara






From: nishi...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 11 Feb 2010 10:46:39 +
Subject: [OSL | CCIE_Voice] (no subject)








Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.


Regards,

 

Nish Tarpara




  
We want to hear all your funny, exciting and crazy Hotmail stories. Tell us now 
  
_
Send us your Hotmail stories and be featured in our newsletter
http://clk.atdmt.com/UKM/go/195013117/direct/01/___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Nish Tarpara]

Hi,

With regards to SRST teting on remote lab, please advice me how to test it by 
remote ip phones connected via Ezvpn.


Regards,

 

Nish Tarpara




  
_
Tell us your greatest, weirdest and funniest Hotmail stories
http://clk.atdmt.com/UKM/go/195013117/direct/01/___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Jefferson Wilson]

Phil,

 

Good  morning.  I would look at the settings in UCM on the line on the
device.  All the way at the bottom  there are some check boxes for
called, Calling and redirected number.  Then once the call gets  to
Unity use the Port Viewer (??) in RTMT to see what Unity is seeing.
>From there you can set up call routing rules in Unity to match and send
the call where you want.   That is what I have done in the past.  

 

Just some thoughts.  Hope that helps.   Others from the group will
probably chime in also.

 

Jefferson

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[kill mill]

Hi,
I was testing a script to play a prompt and send a disconnect to the ccm and
hang up gracefully in other words i hit the script the ICD plays a prompt
and I want to hang up without the system prompt stating we are having
problems. I dont seem to be able to
get a graceful disconnect unless I redirect the call to a unity handler and
say goodbye. Is there another method to accomplish this ?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Amy Ryan]

 

 

---

Amy Ryan -- CCIE #24677

Senior Technical Instructor - IPexpert, Inc.

Mailto:   ar...@ipexpert.com

Telephone: +1.810.326.1444

Fax: +1.810.454.0130

Live Assistance, Please visit:  
www.ipexpert.com/chat

IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service
Provider) Certification Training with locations throughout the United
States, Europe and Australia. Be sure to check out our online communities at
 www.ipexpert.com/communities and our
public website at   www.ipexpert.com

 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[crazibug]

OEQ = 21 points
Lab  = 79 points

2 out 4 correct = 0 points
3 or 4/4 correct = 21 points.

bottomline, you cannot pass the lab unless you answer at least 3 out of 
4 questions correctly, since passing score is 80.
HTH



Jerry Bai wrote:
> Dear Folks,
>  
> I have questions on Open End Questions for CCIE Voice. I know cisco 
> introduce 30 mins core knowledge questions before lab.  Will 4 OEQ 
> questions be scored and carry to your total lab points?
>  
> Cheers
>  
> Jerry 
>
> 
>
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>   

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Jerry Bai]

Hi Kevin

Thanks for your info. It seems that we will have enough time to complete V3 lab 
compared to V2 if OEQ is not a big problem 

cheers,

Jerry





From: Kevin Damisch 
Sent: Wednesday, October 28, 2009 4:56 PM
To: Jerry Bai ; ccie_voice@onlinestudylist.com 
Subject: RE: [OSL | CCIE_Voice] (no subject)


Jerry, here's the scoop on OEQs:

 

The total lab is 100 points, you need 80 to pass.  The OEQ section is 21 points 
and contains 4 questions.  If you get 3 or 4 questions correct, you will get 21 
points for that section.  If you get 0, 1, or 2 questions correct, then you get 
0 points for that section.  So, if you miss 2 of the OEQs, then you will fail 
the entire lab.  Here's why..Even if you get every single detail correct on the 
lab portion, you would only get 79 points from the various lab sections and 0 
from the OEQs.  79 is not enough to pass.  You get 30 minutes for the OEQs, but 
if you finish them early, you can start immediately on the lab.  Even if you 
think you missed 2 or more questions, you must forget about it for the rest of 
the day and focus solely on the lab because one the OEQs are done and you start 
the lab, you can't go back the them and you need all of your concentration on 
the remaining lab sections.

 

Thanks,

Kevin

 

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jerry Bai
Sent: Wednesday, October 28, 2009 12:29 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)

 

Dear Folks,

 

I have questions on Open End Questions for CCIE Voice. I know cisco introduce 
30 mins core knowledge questions before lab.  Will 4 OEQ questions be scored 
and carry to your total lab points?

 

Cheers

 

Jerry 

   




This communication (including any attachments) is intended only for the use of 
the individual or entity to which it is addressed, and may contain information 
that is privileged, confidential and exempt from disclosure under applicable 
law. If you are not the intended recipient, any dissemination, distribution or 
copying of this communication is strictly prohibited. If you have received this 
communication in error, please notify Vital Support Systems at 515 334 5700 and 
delete or destroy all copies and the original document.
<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Kevin Damisch]

Jerry, here's the scoop on OEQs:

The total lab is 100 points, you need 80 to pass.  The OEQ section is 21 points 
and contains 4 questions.  If you get 3 or 4 questions correct, you will get 21 
points for that section.  If you get 0, 1, or 2 questions correct, then you get 
0 points for that section.  So, if you miss 2 of the OEQs, then you will fail 
the entire lab.  Here's whyEven if you get every single detail correct on 
the lab portion, you would only get 79 points from the various lab sections and 
0 from the OEQs.  79 is not enough to pass.  You get 30 minutes for the OEQs, 
but if you finish them early, you can start immediately on the lab.  Even if 
you think you missed 2 or more questions, you must forget about it for the rest 
of the day and focus solely on the lab because one the OEQs are done and you 
start the lab, you can't go back the them and you need all of your 
concentration on the remaining lab sections.

Thanks,
Kevin

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jerry Bai
Sent: Wednesday, October 28, 2009 12:29 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)

Dear Folks,

I have questions on Open End Questions for CCIE Voice. I know cisco introduce 
30 mins core knowledge questions before lab.  Will 4 OEQ questions be scored 
and carry to your total lab points?

Cheers

Jerry



This communication (including any attachments) is intended only for the use of 
the individual or entity to which it is addressed, and may contain information 
that is privileged, confidential and exempt from disclosure under applicable 
law. If you are not the intended recipient, any dissemination, distribution or 
copying of this communication is strictly prohibited. If you have received this 
communication in error, please notify Vital Support Systems at 515 334 5700 and 
delete or destroy all copies and the original document.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Jerry Bai]

Dear Folks,

I have questions on Open End Questions for CCIE Voice. I know cisco introduce 
30 mins core knowledge questions before lab.  Will 4 OEQ questions be scored 
and carry to your total lab points?

Cheers

Jerry 
   ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] (no subject)

[Chris Parker]

I just retook the test a few weeks ago as it had been nearly three  
years since I passed it the first time.


It's basically a cross sampling of everything required for the ccvp.  
In terms of knowledge base it is closer to a v2 lab than v3. It still  
has alot of the older technolgies on there. I think that is because  
some of the books in the reading list have yet to be updated.


Chris

Sent from my iPhone

On Aug 1, 2009, at 5:11 AM, gpsnwe  wrote:


Hi Folkas!

I need some clarifications on the Voice written exm.

 1) Any change in the Voice written exam

 2) UCM which version we have to foucus on  ?  [ For SRND]




___
For more information regarding industry leading CCIE Lab training,  
please visit www.ipexpert.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[gpsnwe]

Hi Folkas!

I need some clarifications on the Voice written exm.

 1) Any change in the Voice written exam 

 2) UCM which version we have to foucus on  ?  [ For SRND]


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Willie McAllister]

wmcallis...@vccs.edu

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[GPSri Ram]

How srst  license differ from ccme license ?
 
how to upgade the srst licese to ccme llicense or vice-versa ?
 
Thanks to all


  

[OSL | CCIE_Voice] (no subject)

[Ahmad M. Al-Maghrabi]

[cid:image001.jpg@01C9AD5C.BCF24400]
[cid:image002.gif@01C9AD5C.BCF24400]
With best regards,

<><>

Re: [OSL | CCIE_Voice] (no subject)

[basant yadav]

Its 2.3.4 for version 2

- Basant

On Sun, Mar 1, 2009 at 8:08 AM, jeffrey liujian
wrote:

>
> Hi guys,
>
> Is there anyone can help me?
> I am wondering which Cisco Unity Express version I need to use for prepare
> the voice lab? Thanks.
>
>
> Jeffrey
>
>
>
>

[OSL | CCIE_Voice] (no subject)

[jeffrey liujian]

Hi guys,

Is there anyone can help me?
I am wondering which Cisco Unity Express version I need to use for prepare the 
voice lab? Thanks.


Jeffrey


  

Re: [OSL | CCIE_Voice] (no subject)

[Jianhong Fang]

Re: post by: Ryan Hicks 
***
I am not trying to achieve any thing special or from a directed question.
I set up CM as normal, notice that I cannot dial anything. Look at the pull 
replication and notice the subscription is not present. I reestablish it. Give 
it about ten minutes to re-sync. Reboot the SUB, then the PUB. And I still cnot 
dial anything. Even when devices are in the null partition with no CSSs 
assigned.
?
So, if I build any particular lab out, and tis happens, nothing works.
**

If you were talking about CCM DB replication issue, then I think I will follow 
these steps:
--> Ensure Subscriber srv up, SQL DB is running
--> Ensure Pub DB up running
--> In Pub, open 'SQL Enterprise Manager' -> Look for 
--> a. Which Database instance used by default, for example: 'ccm0301'
--> b. Inside this DB instance, verify if you can see 'subscription name' 
with proper ccmname/type/status.  for instance:
Subscription name: CCM2-PM03-MKM
Type: Pull
Status: Active
Subscriber: CCM2-PM03-MKM
SubscriptionDB: CCM0301
> From Pub srv, ping 'ccm2-pm03-mkm' sub, it should pingable, if not 
local hostname need to add it

--> In Sub, do similar thing. Also verify Pub is pingable from Sub.

BTW, if your replica to sub failed, your pub should still up and be able to 
handle calls. How come you cannot dial anything?

Please let me know if you are aware of something else.

James

> From: ccie_voice-requ...@onlinestudylist.com
> Subject: CCIE_Voice Digest, Vol 35, Issue 1
> To: ccie_voice@onlinestudylist.com
> Date: Thu, 1 Jan 2009 09:53:34 -0500
> 
> Send CCIE_Voice mailing list submissions to
>   ccie_voice@onlinestudylist.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>   http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>   ccie_voice-requ...@onlinestudylist.com
> 
> You can reach the person managing the list at
>   ccie_voice-ow...@onlinestudylist.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
> 
> 
> Today's Topics:
> 
>1. Re: IPCC Agent Logged In But Not in Ready State (Alex)
>2. Re: CCIE_Voice Digest, Vol 34, Issue 105 (Ryan Hicks)
> 
> 
> --
> 
> Message: 1
> Date: Thu, 1 Jan 2009 09:32:57 -
> From: "Alex" 
> Subject: Re: [OSL | CCIE_Voice] IPCC Agent Logged In But Not in Ready
>   State
> To: "kamal yousaf" ,
>   
> Message-ID: 
> Content-Type: text/plain; charset="iso-8859-1"
> 
> I found this symptom shows up when phone IP address is not reachable from 
> IPCC and vice versa.
> If the phone is behind NAT, the IPCC tries to communicate to the real phone 
> IP, not NATed IP and therefore HTTP request from the phone is not answered.
> Example:
> real phone IP == 192.168.0.65
> NATed phone IP == 10.1.1.1
> IPCC IP@ == 10.1.200.21
> IPCC tries to communicate to 192.168.0.65, not to 10.1.1.1 => phone receives 
> no response to its HTTP request.
> Rgds
> Alex
>   - Original Message - 
>   From: kamal yousaf 
>   To: ccie_voice@onlinestudylist.com 
>   Sent: Thursday, January 01, 2009 12:02 AM
>   Subject: [OSL | CCIE_Voice] IPCC Agent Logged In But Not in Ready State
> 
> 
>   Hi,
> 
> When i use IPCC Agent login using IP Phone Services, it logs me in 
> successfully  and Screen shows "Not Ready". When i hit "update" to enter into 
> "Ready state",it throws error saying "host not found".
> 
>I have double-checked all service parameters in CCM and they are pointing 
> to right IP address.Can you help me what might be cause of this problem ? 
> 
>   Thanks.
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090101/c2067670/attachment-0001.htm
>  
> 
> --
> 
> Message: 2
> Date: Thu, 1 Jan 2009 06:45:25 -0800 (PST)
> From: Ryan Hicks 
> Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 34, Issue 105
> To: ccie_voice@onlinestudylist.com, Jianhong Fang 
> Message-ID: <284086.981...@web55205.mail.re4.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> I am not trying to achieve any thing special or from a directed question.
> I set up CM as normal, notice that I cannot dial anything. Look at the pull 
> replication and notice the subscription is not present. I reestablish it. 
> Give it about ten minutes to re-sync. Reboot the SUB, then the PUB. And I 
> still cnot dial anything. Even when devices are in the null partition with no 
> CSSs assigned. 
> ?
> So, if I build any particular lab out, and tis happens, nothing works.
> 
> --- On Wed, 12/31/08, Jianhong Fang  wrote:
> 
> From: Jianhong Fang 
> Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 34, Issue 105
> To: ccie_voice@onlinestudylist.com
> Date: Wednesday, December 31, 2008, 9:43 PM
> 
> 
> 
>

[OSL | CCIE_Voice] (no subject)

[Sergio Polizer]

Narinder,  thanks for your reply. The DB was corrupted.

During the IPCC installation, the system says to do not restart CRS Engine
at any node for 10 minutes.

But, after few minutes I've alredy configured the jtapi and I did restart
the CRS. So...

 Cheers, Sergio.