Re: [OSL | CCIE_Voice] AAR Not Attempting to ReRoute

[Martin Sloan]

Hi Alex,

Have you enabled AAR in CCM service parameters?  Not Enough Bandwidth
indicates that it's not enabled.  You should receive something like
'Network Congestion - Rerouting' when AAR is invoked.

Marty


On Thu, Aug 22, 2013 at 5:00 PM, Alex Pishko  wrote:

> All,
>
> Hopefully someone can give me an idea on this one.  Working on my own
> equipment but following the labs and am running into an issue with AAR.
>
> I'm sending a call from HQ to BR 1 using 4 digit dial 5002 ---> 1002.
> When I attempt to make the call I receive the message Not enough bandwidth,
> however I never see AAR actually get invoked.  In my setup as a quick way
> to simulate congestion I set the bandwidth to 23 Kbps between Hub non (hq)
> and BR1.
>
> When I place the call from HQ as I said I get the banner of not enough
> bandwidth but I never see the call actually hit the HQ gateway.  I've run
> debug voip dialpeer, q931 as well voice ccapi inout and neither shows any
> sort of traffic hitting the gateway.
>
> In testing I can successfully dial into the HQ GW, I can dial emergency
> services from the HQ phone, just doesn't seem like it's ever invoking AAR.
>
> I also checked that the external number mask is correctly defined on the
> 1002 extension.
>
> AAR CSS is assigned to the HQ phone, AAR group is assigned to the HQ
> line.  AAR group is prefixing 91 and there is a RP assigned to a partition
> that falls within the AAR CSS that is for 91617XXX that has a RL
> pointed to the HQ GW.
>
> I did see earlier in the lab that they recommend using 7962 phones,
> however I don't have any avaialble at the moment, so just wanted to make
> sure that this might not be it.
>
> Any help would be much appreciated.
>
> Thank you
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] AAR Not Attempting to ReRoute

[Alex Pishko]

All,

Hopefully someone can give me an idea on this one.  Working on my own
equipment but following the labs and am running into an issue with AAR.

I'm sending a call from HQ to BR 1 using 4 digit dial 5002 ---> 1002.  When
I attempt to make the call I receive the message Not enough bandwidth,
however I never see AAR actually get invoked.  In my setup as a quick way
to simulate congestion I set the bandwidth to 23 Kbps between Hub non (hq)
and BR1.

When I place the call from HQ as I said I get the banner of not enough
bandwidth but I never see the call actually hit the HQ gateway.  I've run
debug voip dialpeer, q931 as well voice ccapi inout and neither shows any
sort of traffic hitting the gateway.

In testing I can successfully dial into the HQ GW, I can dial emergency
services from the HQ phone, just doesn't seem like it's ever invoking AAR.

I also checked that the external number mask is correctly defined on the
1002 extension.

AAR CSS is assigned to the HQ phone, AAR group is assigned to the HQ line.
AAR group is prefixing 91 and there is a RP assigned to a partition that
falls within the AAR CSS that is for 91617XXX that has a RL pointed to
the HQ GW.

I did see earlier in the lab that they recommend using 7962 phones, however
I don't have any avaialble at the moment, so just wanted to make sure that
this might not be it.

Any help would be much appreciated.

Thank you
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com