Re: [OSL | CCIE_Voice] Problem in LAB 4.3 A vol 1
If you reset the gateway and no mgcp, mgcp and still face the problem, reload the router. I get that all the time and I simply reload the router and it works From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of amr gaber Sent: Friday, May 07, 2010 11:42 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Problem in LAB 4.3 A vol 1 Dear, in this lab section we should add BR1-RTR as an MGCP gateway. I made the configuration AS Proctorlab guide and I got gateway register (sh ccm-manager) But when I (debug isdn q931) nothing appeared (I dialed as match as the Route Pattern) I attach the BR1 Configuration Please advice Amt THABT CCNP, CCVP ,CUSS,UCCX,CCNA, MCP ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Problem in LAB 4.3 A vol 1
Do a show isdn status. If you don't see MULTIPLE_FRAME_ESTABLISHED state under Layer 2 Status, then do a no isdn bind-l3 ccm-manager command under interface Serial0/0/0:23, wait a few seconds, then put the bind-l3 command back. I find this usually works (much faster than reloading the router). cheers, sd From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of amr gaber Sent: Friday, May 07, 2010 4:42 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Problem in LAB 4.3 A vol 1 Dear, in this lab section we should add BR1-RTR as an MGCP gateway. I made the configuration AS Proctorlab guide and I got gateway register (sh ccm-manager) But when I (debug isdn q931) nothing appeared (I dialed as match as the Route Pattern) I attach the BR1 Configuration Please advice Amt THABT CCNP, CCVP ,CUSS,UCCX,CCNA, MCP ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Problem in LAB 4.3 A vol 1
Dear, in this lab section we should add BR1-RTR as an MGCP gateway. I made the configuration AS Proctorlab guide and I got gateway register (sh ccm-manager) But when I (debug isdn q931) nothing appeared (I dialed as match as the Route Pattern) I attach the BR1 Configuration Please advice Amt THABT CCNP, CCVP ,CUSS,UCCX,CCNA, MCP BR1-RTR#sh run Building configuration... Current configuration : 3240 bytes ! ! Last configuration change at 19:58:24 UTC Fri May 7 2010 ! NVRAM config last updated at 12:28:53 UTC Fri May 7 2010 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model memory-size iomem 20 network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice-card 0 no dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan130 ip address 10.10.101.1 255.255.255.0 ! interface Vlan240 ip address 10.10.201.1 255.255.255.0 ip helper-address 10.10.210.11 ! router ospf 1 router-id 10.10.101.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/0/0:23 ! ccm-manager switchback immediate ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ! mgcp mgcp call-agent 10.10.210.11 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp bind control source-interface Loopback0 mgcp bind media source-interface Loopback0 ! mgcp profile default ! ! ! ! ! ! gatekeeper shutdown ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet line vty 5 15 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet ! scheduler allocate 2 1000 end BR1-RTR#sh ccm BR1-RTR#sh ccm-manager MGCP Domain Name: BR1-RTR.proctorlabs.com PriorityStatus Host Primary Registered 10.10.210.11 First BackupBackup Ready 10.10.210.10 Second Backup None Current active Call Manager:10.10.210.11 Backhaul/Redundant link port: 2428 Failover Interval: 30 seconds Keepalive Interval: 15 seconds Last keepalive sent:19:59:23 UTC May 7 2010 (elapsed time: 00:00:04) Last MGCP traffic time: 19:59:23 UTC May 7 2010 (elapsed time: 00:00:04) Last failover time: 19:58:13 UTC May 7 2010 from (10.10.210.11) Last switchback time: 19:58:23 UTC May 7 2010 from (10.10.210.10) Switchback mode:Immediate MGCP Fallback mode: Not Selected Last MGCP Fallback start time: None Last MGCP Fallback end time:None MGCP Download Tones:Disabled TFTP retry count to shut Ports: 2 Backhaul Link info: Link Protocol: TCP Remote Port Number: 2428 Remote IP Address: 10.10.210.11 Current Link State: OPEN Statistics: Packets recvd: 0 Recv failures: 0 Packet