Re: Boson tests
Hi, I used the Boson test for BCRAN (test #1) and I found it very useful. The questions were almost the same as in the BCRAN exam. -Tapani- Rod Christie wrote: > Hi all, > > I've used the Boson tests for BCMSN (test #1, Harder than the actual exam, > which use great!). But now its time for BCRAN and BSCN, which will be done > over the next month. > > Can anyone please give feed back to the group on which tests they have found > usefull and why for the above tests. > > Just as a side point we have installed the Boson tests on to our Meta Frame > server so that we can access the tests remotely on the weekend before > sittings the tests. This works great and gets around the single installation > problem. In talking with Boson we made sure we had the correct lics. > > Thanks in Adv. > > Rod > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
eigrp and default-route
Hi, I have a problem with eigrp and distribution. Im using distribute-list in a routers eigrp process to filter unwanted networks to enter in the routing table. Below is an example of my configuration. Router eigrp 1000 Network 192.168.10.0 Distribute-list 10 in No auto-summary Access-list 10 permit 192.168.0.0 0.0.255.255 This works fine. Only distributed routes are to networks 192.168.0.0/16. But I would also what the default route to distribute into my routing table. How do I do that ? I tried to use command: default-information in 10 but it didnt help. Any suggestions. -Tapani- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: eigrp and default-route
Feeling stupid! Of course, I need to add default route to my access-list. Access-list 10 permit 0.0.0.0 0.0.0.0 The command default-information confused me. Can anyone explain me, what this command does? > Hi, > > I have a problem with eigrp and distribution. Im using distribute-list > in a routers eigrp process to filter unwanted networks to enter in the > routing table. Below is an example of my configuration. > > Router eigrp 1000 > Network 192.168.10.0 > Distribute-list 10 in > No auto-summary > > Access-list 10 permit 192.168.0.0 0.0.255.255 > > This works fine. Only distributed routes are to networks 192.168.0.0/16. > But I would also what the default route to distribute into my routing > table. How do I do that ? > > I tried to use command: default-information in 10 but it didnt help. > > Any suggestions. > > -Tapani- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: D-channel callback
Here is one good document about ISDN callback feature. http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/dial_c/dcprt8/dccallid.htm -Tapani- "Molendijk, Henk" wrote: > Hello all, > > I want to enable D-channel callback (Euro-ISDN = NET2) from a 1600 series to > a 2600 series for using Batched SMTP. > How is Cisco deals with this ? > Does such a config needs additional settings ? > > Regards, > > Henk Molendijk > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 640-440 / Support 2.0
hi, I used the following book for the support 2.0. I think, it covered the exam very well. -Tapani- Sybex CCNP: Cisco Internetwork Troubleshooting Study Guide Hales, Kevin/ Lammle, Todd/ Padjen, Robert ISBN: 0782125360 FRS wrote: > Hi all, > > Do you have any suggestions on excellent resources to prepare for the > 640-440 exam? > > Thanks in advance. > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: FAst Packet Switching
Check the following URL http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/switch_c/xcprt1/xcdipsp.htm interface command: no ip route-cache -Tapani- "Paco García" wrote: > Hi all: > > How can I disable the Fast Packet Switching feature (if it´s possible) in > Cisco IOS 12? > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SPAN problem
You can do "set span" with catalyst 5k. Catalyst 2924 has different command.. You have to insert following command to the interface, which your monitor is connected to. interface fastethernet 0/1 port monitor FastEthernet 0/2 FastEthernet 0/2 is the monitored interface -Tapani- Robert Borejszo wrote: > Hello: > I am trying to set SPAN on my 2924 switch using command set span > My switch doesn't recognize this command. As matter of fact when I do > set ? > the only provided option is . > > What's wrong? I was sure that 2924 can do span. > > your help will be appreciated. > BTW, I am in privileged mode. > > Thanks, > Robert > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]