Re: Cisco 2501 dot1q encapsulation ? [7:60699]
I'm not sure if the hardware changed on the 25XX routers but, none of them support full duplex operation. Doesn't trunking require at least full duplex interfaces to operate? Thanks...Nabil I have never let my schooling interfere with my education. The Long and Winding Road To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] Sent by: [EMAIL PROTECTED] 01/12/2003 03:05 PM Please respond to The Long and Winding Road Amar wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... to eliminate the contreversy subinterfaces are only supported on fastethernet. are you sure about that? on a 2513 router: Ethernet0 149.22.1.7 YES NVRAM up up Ethernet0.1unassigned YES unset up up the 2500 supportes ISL truncking ONLY, and not .1Q because, isl was made by cisco and at the time of the 2500 it was not added what IOS vesion and feature set. again on a 2513: System image file is flash:/c2500-is-l.122-8.T5.bin Router_7#c Enter configuration commands, one per line. End with CNTL/Z. Router_7(config)#int e 0 Router_7(config-if)#int e 0.1 ? % Unrecognized command Router_7(config-if)#duplex ? full Force full duplex operation half Force half-duplex operation Router_7(config-if)#duplex full ? Router_7(config-if)#duplex full This command is not supported for Ethernet0. Router_7(config-if)#int e 0.1 ? % Unrecognized command Router_7(config-if)#int e 0.1 Router_7(config-subif)#ip addr 1.1.1.1 255.255.255.248 Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or IS L vLAN. Router_7(config-subif)#enca? % Unrecognized command Router_7(config-subif)#e? I.e I am unable to get IP 802.1 encapsulation of any kind. Can do IPX, though. Always could - back to the 11.2 days when I bought my first routers. Simply, but it is supported on the newer platforms like 2600, 3600 etc i have configured it on the following: 12.1(9)T on a 2500, works as it should, but of course has limitations. not seeing it on my bad boys. need more info. thanks. Amar Network Engineer MCSE, CCNP Thomas Muller a icrit dans le message de news: [EMAIL PROTECTED] Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61706t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
to eliminate the contreversy subinterfaces are only supported on fastethernet. the 2500 supportes ISL truncking ONLY, and not .1Q because, isl was made by cisco and at the time of the 2500 it was not added Simply, but it is supported on the newer platforms like 2600, 3600 etc i have configured it on the following: 12.1(9)T on a 2500, works as it should, but of course has limitations. Amar Network Engineer MCSE, CCNP Thomas Muller a icrit dans le message de news: [EMAIL PROTECTED] Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60912t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
Amar wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... to eliminate the contreversy subinterfaces are only supported on fastethernet. are you sure about that? on a 2513 router: Ethernet0 149.22.1.7 YES NVRAM up up Ethernet0.1unassigned YES unset up up the 2500 supportes ISL truncking ONLY, and not .1Q because, isl was made by cisco and at the time of the 2500 it was not added what IOS vesion and feature set. again on a 2513: System image file is flash:/c2500-is-l.122-8.T5.bin Router_7#c Enter configuration commands, one per line. End with CNTL/Z. Router_7(config)#int e 0 Router_7(config-if)#int e 0.1 ? % Unrecognized command Router_7(config-if)#duplex ? full Force full duplex operation half Force half-duplex operation Router_7(config-if)#duplex full ? Router_7(config-if)#duplex full This command is not supported for Ethernet0. Router_7(config-if)#int e 0.1 ? % Unrecognized command Router_7(config-if)#int e 0.1 Router_7(config-subif)#ip addr 1.1.1.1 255.255.255.248 Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or IS L vLAN. Router_7(config-subif)#enca? % Unrecognized command Router_7(config-subif)#e? I.e I am unable to get IP 802.1 encapsulation of any kind. Can do IPX, though. Always could - back to the 11.2 days when I bought my first routers. Simply, but it is supported on the newer platforms like 2600, 3600 etc i have configured it on the following: 12.1(9)T on a 2500, works as it should, but of course has limitations. not seeing it on my bad boys. need more info. thanks. Amar Network Engineer MCSE, CCNP Thomas Muller a icrit dans le message de news: [EMAIL PROTECTED] Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60915t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
dot1.q is not supported on 2500 Thomas Muller wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60701t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
Thomas Muller wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Nope. The minimum router for dot1q is the 2610/2611 with the appropriate IOS. I believe the min IOS is 12.1 Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60704t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60706t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 2501 dot1q encapsulation ? [7:60699]
I dont believe so either, since they only support a 10BT ethernet connection... Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60720t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
Larry Letterman wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I dont believe so either, since they only support a 10BT ethernet connection... It is correct that the 2500 does not support trunking (at least, not yet). But I don't know that the fact that they only support 10bt has anything to do with it. For example, the 2610/2611 have only 10bt also and they support trunking with the right IOS. I believe the 10bt ethernet module on one of the 4000 series routers (probably the4700M) also supported trunking. Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60745t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 2501 dot1q encapsulation ? [7:60699]
This is possible with certain models of the 2600 series, and the cheapest router to support this with 10Mb Ethernet is the 4000 series. HTH. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Larry Letterman Sent: Thursday, January 09, 2003 12:32 PM To: [EMAIL PROTECTED] Subject: RE: Cisco 2501 dot1q encapsulation ? [7:60699] I dont believe so either, since they only support a 10BT ethernet connection... Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60747t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
Hi thomas; AFAIK Dot1q is only supported in (some) FastEthernet interfaces, and 2501 has only Ethernet, so it isn't supported. Thomas Muller Enviado por: [EMAIL PROTECTED] 09/01/2003 16:21 Por favor, responda a Thomas Muller Para: [EMAIL PROTECTED] cc: Asunto: Cisco 2501 dot1q encapsulation ? [7:60699] Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60748t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
I've configured dot1q on 1721s... I think any recent Cisco with FastEthernet will support it. Francisco Sedano Informatica Pronet CCIE Student :-) The Long and Winding Road Enviado por: [EMAIL PROTECTED] 09/01/2003 16:38 Por favor, responda a The Long and Winding Road Para: [EMAIL PROTECTED] cc: Asunto: Re: Cisco 2501 dot1q encapsulation ? [7:60699] Thomas Muller wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Nope. The minimum router for dot1q is the 2610/2611 with the appropriate IOS. I believe the min IOS is 12.1 Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60751t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
This is not true. ISL is onlly supported on FastEthernet. Dot1Q cna be run on a 2610 with 10BT ethernet. Francisco Sedano/Inf-Pronet wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi thomas; AFAIK Dot1q is only supported in (some) FastEthernet interfaces, and 2501 has only Ethernet, so it isn't supported. Thomas Muller Enviado por: [EMAIL PROTECTED] 09/01/2003 16:21 Por favor, responda a Thomas Muller Para: [EMAIL PROTECTED] cc: Asunto: Cisco 2501 dot1q encapsulation ? [7:60699] Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60755t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
Good to know, thanks!! Sam Sneed Enviado por: [EMAIL PROTECTED] 09/01/2003 22:25 Por favor, responda a Sam Sneed Para: [EMAIL PROTECTED] cc: Asunto: Re: Cisco 2501 dot1q encapsulation ? [7:60699] This is not true. ISL is onlly supported on FastEthernet. Dot1Q cna be run on a 2610 with 10BT ethernet. Francisco Sedano/Inf-Pronet wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi thomas; AFAIK Dot1q is only supported in (some) FastEthernet interfaces, and 2501 has only Ethernet, so it isn't supported. Thomas Muller Enviado por: [EMAIL PROTECTED] 09/01/2003 16:21 Por favor, responda a Thomas Muller Para: [EMAIL PROTECTED] cc: Asunto: Cisco 2501 dot1q encapsulation ? [7:60699] Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60765t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
A 2610 with IOS 12.1(3)T should work. I don't own one but I've seen several people post the config's and they verified that it did work. Francisco Sedano/Inf-Pronet wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... 4000? Could you expand on it? Which model/IOS? I have a plain 4000 with 12.1(11) and it doesn't support it.. cebuano Enviado por: [EMAIL PROTECTED] 09/01/2003 22:04 Por favor, responda a cebuano Para: [EMAIL PROTECTED] cc: Asunto: RE: Cisco 2501 dot1q encapsulation ? [7:60699] This is possible with certain models of the 2600 series, and the cheapest router to support this with 10Mb Ethernet is the 4000 series. HTH. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Larry Letterman Sent: Thursday, January 09, 2003 12:32 PM To: [EMAIL PROTECTED] Subject: RE: Cisco 2501 dot1q encapsulation ? [7:60699] I dont believe so either, since they only support a 10BT ethernet connection... Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60763t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 2501 dot1q encapsulation ? [7:60699]
I mistakenly said that..:) I should have said the 10Bt chip set that it used probably wont support trunking. The 26xx chipset is newer and apparently does support trunkingsorry. Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of nrf Sent: Thursday, January 09, 2003 12:52 PM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] Larry Letterman wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I dont believe so either, since they only support a 10BT ethernet connection... It is correct that the 2500 does not support trunking (at least, not yet). But I don't know that the fact that they only support 10bt has anything to do with it. For example, the 2610/2611 have only 10bt also and they support trunking with the right IOS. I believe the 10bt ethernet module on one of the 4000 series routers (probably the4700M) also supported trunking. Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60764t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
I've just configured dot1q on a 4500 with NP6E and IOS 12.2, I haven't tested whether its working. rgds Marc Francisco Sedano/Inf-Pronet wrote: 4000? Could you expand on it? Which model/IOS? I have a plain 4000 with 12.1(11) and it doesn't support it.. cebuano Enviado por: [EMAIL PROTECTED] 09/01/2003 22:04 Por favor, responda a cebuano Para: [EMAIL PROTECTED] cc: Asunto: RE: Cisco 2501 dot1q encapsulation ? [7:60699] This is possible with certain models of the 2600 series, and the cheapest router to support this with 10Mb Ethernet is the 4000 series. HTH. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Larry Letterman Sent: Thursday, January 09, 2003 12:32 PM To: [EMAIL PROTECTED] Subject: RE: Cisco 2501 dot1q encapsulation ? [7:60699] I dont believe so either, since they only support a 10BT ethernet connection... Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60767t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
I've tried just now in my 4000 and it doesn't work, NP-E.. It seems it's time for a router change :-) Francisco Sedano Informatica Pronet. Marc Thach Xuan Ky Enviado por: [EMAIL PROTECTED] 10/01/2003 00:12 Por favor, responda a Marc Thach Xuan Ky Para: [EMAIL PROTECTED] cc: Asunto: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I've just configured dot1q on a 4500 with NP6E and IOS 12.2, I haven't tested whether its working. rgds Marc Francisco Sedano/Inf-Pronet wrote: 4000? Could you expand on it? Which model/IOS? I have a plain 4000 with 12.1(11) and it doesn't support it.. cebuano Enviado por: [EMAIL PROTECTED] 09/01/2003 22:04 Por favor, responda a cebuano Para: [EMAIL PROTECTED] cc: Asunto: RE: Cisco 2501 dot1q encapsulation ? [7:60699] This is possible with certain models of the 2600 series, and the cheapest router to support this with 10Mb Ethernet is the 4000 series. HTH. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Larry Letterman Sent: Thursday, January 09, 2003 12:32 PM To: [EMAIL PROTECTED] Subject: RE: Cisco 2501 dot1q encapsulation ? [7:60699] I dont believe so either, since they only support a 10BT ethernet connection... Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60771t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2501 dot1q encapsulation ? [7:60699]
nrf wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Larry Letterman wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I dont believe so either, since they only support a 10BT ethernet connection... It is correct that the 2500 does not support trunking (at least, not yet). But I don't know that the fact that they only support 10bt has anything to do with it. For example, the 2610/2611 have only 10bt also and they support trunking with the right IOS. I believe the 10bt ethernet module on one of the 4000 series routers (probably the4700M) also supported trunking. the NM-4E module used in the 3640 will support dot1q trunking as well, again, with the correct IOS. Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60776t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 2501 dot1q encapsulation ? [7:60699]
4000? Could you expand on it? Which model/IOS? I have a plain 4000 with 12.1(11) and it doesn't support it.. cebuano Enviado por: [EMAIL PROTECTED] 09/01/2003 22:04 Por favor, responda a cebuano Para: [EMAIL PROTECTED] cc: Asunto: RE: Cisco 2501 dot1q encapsulation ? [7:60699] This is possible with certain models of the 2600 series, and the cheapest router to support this with 10Mb Ethernet is the 4000 series. HTH. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Larry Letterman Sent: Thursday, January 09, 2003 12:32 PM To: [EMAIL PROTECTED] Subject: RE: Cisco 2501 dot1q encapsulation ? [7:60699] I dont believe so either, since they only support a 10BT ethernet connection... Larry Letterman Network Engineer San Jose Transport Cisco Systems Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, January 09, 2003 7:43 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 2501 dot1q encapsulation ? [7:60699] I don't believe that any of the 2500 series routers support trunking of any variety. If I'm wrong someone will surely correct me. John Thomas Muller 1/9/03 8:21:59 AM Hi, I've tried to configure dot1q on the LAN interface on my Cisco 2501 running 12.2 (IP Plus) but it doesn't seem to know the encapsulation dot1q command. Does anyone know if the 2500 series supports dot1q ? Thanks, Thomas [EMAIL PROTECTED] -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60762t=60699 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]