Re: IPX Problem [7:42735]
Did you know you can do trace route with IPX on Cisco routers? It's not just an IP thing. I suggest you try this. Maybe you caused some weird routing somehow. Your network sounds sort of complicated and non-hierarchical. Maybe the branch offices used to communicate directly and how they go through the core and out into the outer reaches and back again. Trace route would let you determine if this is happening. Good luck. Let us know what you discover. This is an interesting problem. Priscilla At 03:52 AM 4/27/02, Ali, Abbas wrote: >I have a network where corporate is connected to 3 branch offices through >Point to Point. The branch office are also connected together in a full >mesh frame-relay toplogy as a backup. The corporate office is also >connected to few other small branches in a hub and spoke frame-relay >topology. I was running IPX RIP by default between those networks and >response time between IPX hosts and servers was not really bad. I decided >to make some more changes to decrease the latency by configuring IPX eigrp >between WAN Links only and left RIP on LAN interfaces. Instead of >decreasing the latency it increased it by 4 times. Before EIGRP I copied a >file and it took about 20 seconds. Now it's taking almost 4 minutes. I am >curious where I went wrong. > >All I did to enable IPX Router eigrp 2 >advertised all my WAN networks. > >network >network and so on. > >I then removed those WAN networks from RIP routing by > >IPX router rip >no network >no network and so on. > >Note: I am also running EIGRP 1 for IP network. I don't think that it will >conflict since both have under different Autonomous systems. > >Any suggestions folks. > >Regards, > >Ab Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42752&t=42735 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPX Problem [7:42735]
did anything else change? I ask because on the surface, everything is fine. IPX EIGRP should have no effect on your throughput. I ran an eight site dual homed IPX network for several years, with no WAN issues other than the usual telco related problems. I've done numerous labs. the so called AS numbers in EIGRP are not relevant. IPX and IP are different router processes, and there is no conflict there. are you seeing all routes in all router's tables? got a loop in there somewhere? accidentally shut down some interfaces? got a telco problem that occurred coincidentally? checked your interface counters, your process counters? done some debugs while doing the file transfers? HTH ""Ali, Abbas"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have a network where corporate is connected to 3 branch offices through > Point to Point. The branch office are also connected together in a full > mesh frame-relay toplogy as a backup. The corporate office is also > connected to few other small branches in a hub and spoke frame-relay > topology. I was running IPX RIP by default between those networks and > response time between IPX hosts and servers was not really bad. I decided > to make some more changes to decrease the latency by configuring IPX eigrp > between WAN Links only and left RIP on LAN interfaces. Instead of > decreasing the latency it increased it by 4 times. Before EIGRP I copied a > file and it took about 20 seconds. Now it's taking almost 4 minutes. I am > curious where I went wrong. > > All I did to enable IPX Router eigrp 2 > advertised all my WAN networks. > > network > network and so on. > > I then removed those WAN networks from RIP routing by > > IPX router rip > no network > no network and so on. > > Note: I am also running EIGRP 1 for IP network. I don't think that it will > conflict since both have under different Autonomous systems. > > Any suggestions folks. > > Regards, > > Ab Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42748&t=42735 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPX Problem
Shane, It seems you have an IP only image. You may have been confused by the L in the image, but as far as I know when the L appears in that position it just indicates a relocatable image, not IPX. Appletalk isn't anywhere in there. Cheers, Gareth ""Shane Stockman"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > This might seem silly but I am trying to enable ipx routing on my router and > it just keeps telling unrecog command , even though I am in global config > mode.When I do a ipx ? , i get unrecog command in global config mode.Same > with apple > > IOS (tm) 1600 Software (C1600-Y-L), Version 12.0(3), RELEASE SOFTWARE (fc1) > > > Thanks > > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPX Problem
It sounds like your running an IOS that doesn't have IPX includedtry upgrading your IOS Thanks, Chris Boyd Network Support CCNA Alex Lee, Inc. 120 4th Street SW Hickory, NC 28601 (828) 323-4103 http://www.alexlee.com - Original Message - From: "Shane Stockman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 03, 2000 2:38 PM Subject: IPX Problem > This might seem silly but I am trying to enable ipx routing on my router and > it just keeps telling unrecog command , even though I am in global config > mode.When I do a ipx ? , i get unrecog command in global config mode.Same > with apple > > IOS (tm) 1600 Software (C1600-Y-L), Version 12.0(3), RELEASE SOFTWARE (fc1) > > > Thanks > > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPX Problem
The IOS may not support IPX. Go to the CCO site and research it, but more than likely that is the problem. Raul -Original Message- From: Shane Stockman <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Friday, November 03, 2000 3:06 PM Subject: IPX Problem >This might seem silly but I am trying to enable ipx routing on my router and >it just keeps telling unrecog command , even though I am in global config >mode.When I do a ipx ? , i get unrecog command in global config mode.Same >with apple > >IOS (tm) 1600 Software (C1600-Y-L), Version 12.0(3), RELEASE SOFTWARE (fc1) > > >Thanks > > >_ >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > >Share information about yourself, create your own public profile at >http://profiles.msn.com. > >_ >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IPX Problem
You need a desktop or enterprise image. It seems you only have an IP IOS image. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Shane Stockman Sent: Friday, November 03, 2000 11:38 AM To: [EMAIL PROTECTED] Subject: IPX Problem This might seem silly but I am trying to enable ipx routing on my router and it just keeps telling unrecog command , even though I am in global config mode.When I do a ipx ? , i get unrecog command in global config mode.Same with apple IOS (tm) 1600 Software (C1600-Y-L), Version 12.0(3), RELEASE SOFTWARE (fc1) Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]