Re: isdn problem [7:27975]
Robert was right! ""sudhakar"" >Dear Sir > > i connected router1 and router2 by BRI0 isdn line, but it showing conection > fails., not pinging , So plese give me solution on this. > > waoting for u r replay > > router1 > > router1#sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname router1 > ! > > ! > username router2 password 0 router2 > ip subnet-zero > isdn switch-type basic-net3 > ! > ! > ! > ! > interface Ethernet0 > ip address 198.168.0.8 255.255.255.0 > no ip directed-broadcast > no ip route-cache > ! > interface Serial0 > description BLR-PUN LINK > bandwidth 64 > ip address 172.16.127.4 255.255.255.0 > no ip directed-broadcast > no ip route-cache > shutdown > no fair-queue > ! > interface BRI0 > ip address 172.16.130.2 255.255.255.0 > ip directed-broadcast > encapsulation ppp > dialer idle-timeout 500 > dialer-group 1 > isdn switch-type basic-net3 > no peer default ip address > no fair-queue > ppp authentication pap > > router rip > redistribute static > network 172.16.0.0 > > ip classless > ip route 0.0.0.0 0.0.0.0 172.16.130.1 > ! > ! > line con 0 > transport input none > line vty 0 4 > > ! > end > > Router2 > router2#sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname router2 > ! > enable password 12#$ > ! > username mcd password 0 12#$ > username router1 password 0 router1 > ip subnet-zero > isdn switch-type basic-net3 > ! > ! > ! > interface Ethernet0 > ip address 172.16.4.3 255.255.255.0 > ip directed-broadcast > no ip route-cache > ! > interface Serial0 > bandwidth 64 > ip address 172.16.129.1 255.255.255.0 > no ip directed-broadcast > ! > interface BRI0 > bandwidth 64 > ip address 172.16.130.1 255.255.255.0 > no ip directed-broadcast > encapsulation ppp > dialer idle-timeout 99 > dialer map ip 172.16.130.2 broadcast 2648970 > dialer hold-queue 25 > dialer load-threshold 1 either > dialer-group 1 > isdn switch-type basic-net3 > no peer default ip address > ppp authentication pap > ! > router rip > network 172.16.0.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 172.16.4.1 > ip route 172.16.126.0 255.255.255.0 172.16.4.1 > ip route 172.16.130.0 255.255.255.0 172.16.130.2 > ! > dialer-list 1 protocol ip permit > ! > line con 0 > password 123 > transport input none > line vty 0 4 > password 123 > login > ! > end > > Debugg file > router2#debug is > router2#debug isdn eve > router2#debug isdn events > ISDN events debugging is on > router2#p > *Apr 19 04:52:15.118: ISDN BR0: TX -> RRp sapi = 0 tei = 94 nr = 10 > *Apr 19 04:52:15.158: ISDN BR0: RX INFOc sapi = 0 tei = 94 ns = 6 nr = > 10 > i = 0x080115050402889018018370088032363438393730 > *Apr 19 04:52:15.884: SETUP pd = 8 callref = 0x15 > *Apr 19 04:52:15.884: Bearer Capability i = 0x8890 > *Apr 19 04:52:15.888: Channel ID i = 0x83 > *Apr 19 04:52:15.888: Called Party Number i = 0x80, '2648970' > *Apr 19 04:52:15.944: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 11 > *Apr 19 04:52:16.130: ISDN BR0: received HOST_INFORMATION call_id 0x8193 > *Apr 19 04:52:16.694: ISDN Event: dsl 0 call_id 0x8193 B channel assigned by > swi > tch 0 > ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 12 > *Apr 19 04:52:16.765: ISDN BR0: received HOST_CONNECT call_id 0x8193 > *Apr 19 04:52:16.765: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up > *Apr 19 04:52:16.789: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to > 2648 > 970 > *Apr 19 04:52:16.793: BR0:1 PPP: Treating connection as a callout > *Apr 19 04:52:16.797: BR0:1 PPP: Phase is ESTABLISHING, Active Open > *Apr 19 04:52:16.797: BR0:1 LCP: O CONFREQ [Closed] id 139 len 10 > *Apr 19 04:52:16.801: BR0:1 LCP:MagicNumber 0x0184C7B3 (0x05060184C7B3) > *Apr 19 04:52:16.801: ISDN BR0: Event: Connected to 2648970 on B1 at 64 Kb/s > *Apr 19 04:52:16.805: ISDN BR0: TX -> INFOc sapi = 0 tei = 94 ns = 7 nr = > 12 > i = 0x0801150F > *Apr 19 04:52:16.809: CONNECT_ACK pd = 8 callref = 0x15 > *Apr 19 04:52:16.813: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 13 > *Apr 19 04:52:16.840: ISDN BR0: received HOST_FACILITY_INVOKE call_id 0x8193 > Facility i = 0x91A1130202410B020122300AA1053003020101820100 > *Apr 19 04:52:16.844: - ETSI Supplementary Service, Invoke, AOC-D Charging > Uni > ts: 1 > *Apr 19 04:52:16.848: BRI0:1: AOC-D Recorded Units = 1 > *Apr 19 04:52:16.852: BR0:1 LCP: I CONFREQ [REQsent] id 123 len 14 > *Apr 19 04:52:16.852: BR0:1 LCP:AuthProto PAP (0x0304C023) > *Apr 19 04:52:16.856: BR0:1 LCP:MagicNumber 0x0393D0A3 (0x05060393D0A3) > *Apr 19 04:52:16.856: BR0:1 LCP: O CONFNAK [REQsent] id 123 len 9 > *Apr 19 04:52:16.860: BR0:1 LCP:AuthProto CHAP (0x0305C22305) > *Apr 19 04:52:16.864:
RE: isdn problem [7:27975]
>From your config, I assume you ping from router 2 to 1 since you only have dialer map at BRI0 of router 2. I think you are missing this in the interface config of BRI0 at router 2 ppp pap sent-username ... password . Hope this helps... -Original Message- From: sudhakar [mailto:[EMAIL PROTECTED]] Sent: Monday, December 03, 2001 7:18 PM To: [EMAIL PROTECTED] Subject: isdn problem [7:27975] >Dear Sir i connected router1 and router2 by BRI0 isdn line, but it showing conection fails., not pinging , So plese give me solution on this. > waoting for u r replay router1 router1#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname router1 ! ! username router2 password 0 router2 ip subnet-zero isdn switch-type basic-net3 ! ! ! ! interface Ethernet0 ip address 198.168.0.8 255.255.255.0 no ip directed-broadcast no ip route-cache ! interface Serial0 description BLR-PUN LINK bandwidth 64 ip address 172.16.127.4 255.255.255.0 no ip directed-broadcast no ip route-cache shutdown no fair-queue ! interface BRI0 ip address 172.16.130.2 255.255.255.0 ip directed-broadcast encapsulation ppp dialer idle-timeout 500 dialer-group 1 isdn switch-type basic-net3 no peer default ip address no fair-queue ppp authentication pap router rip redistribute static network 172.16.0.0 ip classless ip route 0.0.0.0 0.0.0.0 172.16.130.1 ! ! line con 0 transport input none line vty 0 4 ! end Router2 router2#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router2 ! enable password 12#$ ! username mcd password 0 12#$ username router1 password 0 router1 ip subnet-zero isdn switch-type basic-net3 ! ! ! interface Ethernet0 ip address 172.16.4.3 255.255.255.0 ip directed-broadcast no ip route-cache ! interface Serial0 bandwidth 64 ip address 172.16.129.1 255.255.255.0 no ip directed-broadcast ! interface BRI0 bandwidth 64 ip address 172.16.130.1 255.255.255.0 no ip directed-broadcast encapsulation ppp dialer idle-timeout 99 dialer map ip 172.16.130.2 broadcast 2648970 dialer hold-queue 25 dialer load-threshold 1 either dialer-group 1 isdn switch-type basic-net3 no peer default ip address ppp authentication pap ! router rip network 172.16.0.0 ! ip classless ip route 0.0.0.0 0.0.0.0 172.16.4.1 ip route 172.16.126.0 255.255.255.0 172.16.4.1 ip route 172.16.130.0 255.255.255.0 172.16.130.2 ! dialer-list 1 protocol ip permit ! line con 0 password 123 transport input none line vty 0 4 password 123 login ! end Debugg file router2#debug is router2#debug isdn eve router2#debug isdn events ISDN events debugging is on router2#p *Apr 19 04:52:15.118: ISDN BR0: TX -> RRp sapi = 0 tei = 94 nr = 10 *Apr 19 04:52:15.158: ISDN BR0: RX INFOc sapi = 0 tei = 94 ns = 6 nr = 10 i = 0x080115050402889018018370088032363438393730 *Apr 19 04:52:15.884: SETUP pd = 8 callref = 0x15 *Apr 19 04:52:15.884: Bearer Capability i = 0x8890 *Apr 19 04:52:15.888: Channel ID i = 0x83 *Apr 19 04:52:15.888: Called Party Number i = 0x80, '2648970' *Apr 19 04:52:15.944: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 11 *Apr 19 04:52:16.130: ISDN BR0: received HOST_INFORMATION call_id 0x8193 *Apr 19 04:52:16.694: ISDN Event: dsl 0 call_id 0x8193 B channel assigned by swi tch 0 ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 12 *Apr 19 04:52:16.765: ISDN BR0: received HOST_CONNECT call_id 0x8193 *Apr 19 04:52:16.765: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up *Apr 19 04:52:16.789: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 2648 970 *Apr 19 04:52:16.793: BR0:1 PPP: Treating connection as a callout *Apr 19 04:52:16.797: BR0:1 PPP: Phase is ESTABLISHING, Active Open *Apr 19 04:52:16.797: BR0:1 LCP: O CONFREQ [Closed] id 139 len 10 *Apr 19 04:52:16.801: BR0:1 LCP:MagicNumber 0x0184C7B3 (0x05060184C7B3) *Apr 19 04:52:16.801: ISDN BR0: Event: Connected to 2648970 on B1 at 64 Kb/s *Apr 19 04:52:16.805: ISDN BR0: TX -> INFOc sapi = 0 tei = 94 ns = 7 nr = 12 i = 0x0801150F *Apr 19 04:52:16.809: CONNECT_ACK pd = 8 callref = 0x15 *Apr 19 04:52:16.813: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 13 *Apr 19 04:52:16.840: ISDN BR0: received HOST_FACILITY_INVOKE call_id 0x8193 Facility i = 0x91A1130202410B020122300AA1053003020101820100 *Apr 19 04:52:16.844: - ETSI Supplementary Service, Invoke, AOC-D Charging Uni ts: 1 *Apr 19 04:52:16.848: BRI0:1: AOC-D Recorded Units = 1 *Apr 19 04:52:16.852: BR0:1 LCP: I CONFREQ [REQsent] id 123 len 14 *Apr 19 04:52:16.852: BR0:1 LCP:AuthProto PAP (0x0304C023) *Apr 19 04:52:16.856: BR0:1 LCP:MagicNumber 0x0393D0A3 (0x05060393D0A3) *Apr 19 04:52:16.856: BR0:1 LCP: O CONFNAK [REQsent] id 123 len 9 *Apr 19 04:52:16.860: BR0:1 LCP:AuthProto CHAP (0x0305C
Re: isdn problem [7:27975]
Assume that router1 initiates call to router2, the password that router1 send to router2 must be the SAME with the password configured at router2. > router1#sh run > username router2 password 0 router2 > router2#sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname router2 > ! > enable password 12#$ > ! > username mcd password 0 12#$ > username router1 password 0 router1 > *Apr 19 04:52:16.987: BR0:1 LCP: I CONFREQ [REQsent] id 129 len 14 > *Apr 19 04:52:16.991: BR0:1 LCP:AuthProto PAP (0x0304C023) > *Apr 19 04:52:16.991: BR0:1 LCP:MagicNumber 0x0393D0A3 (0x05060393D0A3) > *Apr 19 04:52:16.995: BR0:1 LCP: O CONFREJ [REQsent] id 129 len 8 > *Apr 19 04:52:16.999: BR0:1 LCP:AuthProto PAP (0x0304C Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27980&t=27975 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: isdn problem [7:27975]
try adding a dialer string or dialer map statement to your bri interface -Original Message- From: sudhakar [mailto:[EMAIL PROTECTED]] Sent: 03 December 2001 11:18 To: [EMAIL PROTECTED] Subject: isdn problem [7:27975] >Dear Sir i connected router1 and router2 by BRI0 isdn line, but it showing conection fails., not pinging , So plese give me solution on this. > waoting for u r replay router1 router1#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname router1 ! ! username router2 password 0 router2 ip subnet-zero isdn switch-type basic-net3 ! ! ! ! interface Ethernet0 ip address 198.168.0.8 255.255.255.0 no ip directed-broadcast no ip route-cache ! interface Serial0 description BLR-PUN LINK bandwidth 64 ip address 172.16.127.4 255.255.255.0 no ip directed-broadcast no ip route-cache shutdown no fair-queue ! interface BRI0 ip address 172.16.130.2 255.255.255.0 ip directed-broadcast encapsulation ppp dialer idle-timeout 500 dialer-group 1 isdn switch-type basic-net3 no peer default ip address no fair-queue ppp authentication pap router rip redistribute static network 172.16.0.0 ip classless ip route 0.0.0.0 0.0.0.0 172.16.130.1 ! ! line con 0 transport input none line vty 0 4 ! end Router2 router2#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router2 ! enable password 12#$ ! username mcd password 0 12#$ username router1 password 0 router1 ip subnet-zero isdn switch-type basic-net3 ! ! ! interface Ethernet0 ip address 172.16.4.3 255.255.255.0 ip directed-broadcast no ip route-cache ! interface Serial0 bandwidth 64 ip address 172.16.129.1 255.255.255.0 no ip directed-broadcast ! interface BRI0 bandwidth 64 ip address 172.16.130.1 255.255.255.0 no ip directed-broadcast encapsulation ppp dialer idle-timeout 99 dialer map ip 172.16.130.2 broadcast 2648970 dialer hold-queue 25 dialer load-threshold 1 either dialer-group 1 isdn switch-type basic-net3 no peer default ip address ppp authentication pap ! router rip network 172.16.0.0 ! ip classless ip route 0.0.0.0 0.0.0.0 172.16.4.1 ip route 172.16.126.0 255.255.255.0 172.16.4.1 ip route 172.16.130.0 255.255.255.0 172.16.130.2 ! dialer-list 1 protocol ip permit ! line con 0 password 123 transport input none line vty 0 4 password 123 login ! end Debugg file router2#debug is router2#debug isdn eve router2#debug isdn events ISDN events debugging is on router2#p *Apr 19 04:52:15.118: ISDN BR0: TX -> RRp sapi = 0 tei = 94 nr = 10 *Apr 19 04:52:15.158: ISDN BR0: RX INFOc sapi = 0 tei = 94 ns = 6 nr = 10 i = 0x080115050402889018018370088032363438393730 *Apr 19 04:52:15.884: SETUP pd = 8 callref = 0x15 *Apr 19 04:52:15.884: Bearer Capability i = 0x8890 *Apr 19 04:52:15.888: Channel ID i = 0x83 *Apr 19 04:52:15.888: Called Party Number i = 0x80, '2648970' *Apr 19 04:52:15.944: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 11 *Apr 19 04:52:16.130: ISDN BR0: received HOST_INFORMATION call_id 0x8193 *Apr 19 04:52:16.694: ISDN Event: dsl 0 call_id 0x8193 B channel assigned by swi tch 0 ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 12 *Apr 19 04:52:16.765: ISDN BR0: received HOST_CONNECT call_id 0x8193 *Apr 19 04:52:16.765: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up *Apr 19 04:52:16.789: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 2648 970 *Apr 19 04:52:16.793: BR0:1 PPP: Treating connection as a callout *Apr 19 04:52:16.797: BR0:1 PPP: Phase is ESTABLISHING, Active Open *Apr 19 04:52:16.797: BR0:1 LCP: O CONFREQ [Closed] id 139 len 10 *Apr 19 04:52:16.801: BR0:1 LCP:MagicNumber 0x0184C7B3 (0x05060184C7B3) *Apr 19 04:52:16.801: ISDN BR0: Event: Connected to 2648970 on B1 at 64 Kb/s *Apr 19 04:52:16.805: ISDN BR0: TX -> INFOc sapi = 0 tei = 94 ns = 7 nr = 12 i = 0x0801150F *Apr 19 04:52:16.809: CONNECT_ACK pd = 8 callref = 0x15 *Apr 19 04:52:16.813: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 13 *Apr 19 04:52:16.840: ISDN BR0: received HOST_FACILITY_INVOKE call_id 0x8193 Facility i = 0x91A1130202410B020122300AA1053003020101820100 *Apr 19 04:52:16.844: - ETSI Supplementary Service, Invoke, AOC-D Charging Uni ts: 1 *Apr 19 04:52:16.848: BRI0:1: AOC-D Recorded Units = 1 *Apr 19 04:52:16.852: BR0:1 LCP: I CONFREQ [REQsent] id 123 len 14 *Apr 19 04:52:16.852: BR0:1 LCP:AuthProto PAP (0x0304C023) *Apr 19 04:52:16.856: BR0:1 LCP:MagicNumber 0x0393D0A3 (0x05060393D0A3) *Apr 19 04:52:16.856: BR0:1 LCP: O CONFNAK [REQsent] id 123 len 9 *Apr 19 04:52:16.860: BR0:1 LCP:AuthProto CHAP (0x0305C22305) *Apr 19 04:52:16.864: BR0:1 LCP: I CONFACK [REQsent] id 139 len 10 *Apr 19 04:52:16.864: BR0:1 LCP:MagicNumber 0x0184C7B3 (0x05060184C7B3) *Apr 19 04:52:16.880: BR0:1 LCP: