RE: putting ip class in cosco 2620 [7:40347]
The interface has to be configured for a vlan first i.e.: r7(config)#int f0/0 r7(config-if)#no sh r7(config-if)#int f0/0.1 r7(config-subif)#ip addr 1.1.1.1 255.255.255.0 Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or ISL vLAN. r7(config-subif)#encap isl 1 r7(config-subif)#ip addr 1.1.1.1 255.255.255.0 r7(config-subif)# -Original Message- From: adam krause [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 03, 2002 1:56 PM To: [EMAIL PROTECTED] Subject: putting ip class in cosco 2620 [7:40347] i want to create a new VLAN and after i type: ip address (x.x.x.x) (x.x.x.x) i get this: Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or IS L vLAN. any suggestions? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40368&t=40347 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: putting ip class in cosco 2620 [7:40347]
Try typing encapsulation (isl, dot1q) before typing the ip address. > -Original Message- > From: adam krause [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, April 03, 2002 12:56 PM > To: [EMAIL PROTECTED] > Subject: putting ip class in cosco 2620 [7:40347] > > > i want to create a new VLAN and after i type: > ip address (x.x.x.x) (x.x.x.x) > i get this: > Configuring IP routing on a LAN subinterface is only allowed if that > subinterface is already configured as part of an IEEE 802.10, > IEEE 802.1Q, > or IS > L vLAN. > > any suggestions? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40365&t=40347 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: putting ip class in cosco 2620 [7:40347]
>i want to create a new VLAN and after i type: >ip address (x.x.x.x) (x.x.x.x) >i get this: >Configuring IP routing on a LAN subinterface is only allowed if that >subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, >or IS >L vLAN. Before configuring ip address on subinterface, first set encapsulation. For example: interface fast 0/0 no ip address interface fast0/0.1 encapsulation dot1q 10 ip address 192.168.1.254 255.255.255.0 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40364&t=40347 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: putting ip class in cosco 2620 [7:40347]
> Configuring IP routing on a LAN subinterface is only allowed if that > subinterface is already configured as part of an IEEE 802.10, An example is on the following page: http://www.cisco.com/warp/public/473/50.shtml#cisco2600 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40359&t=40347 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]