Re: [Cooker] can't log in as root?
What is your security level set to? joseph On Wed, 2002-03-20 at 19:01, wyrmzr wrote: Strange behavior from 8.2 full... I can't log in as root, have to log in as my regular user then su root. When I try to log in as root, the system tells me that authentication failed, but when I su root, it takes my password fine. Anyone explain this?
[Cooker] RC1 - Still no sound for ES Maestro 2E chipsets
The output from the following commands is in the attached text file. lspcidrake -v lspci -v lsmod The attached file also lists the my /etc/modules.conf /dev/mixer appears to be non existant. I have attempted to setup the sound via drakconf's HardDrake. The result of this attempt was an error page being displayed. - /lib/modules/2.4.18-4mdk/drivers/sound/maestro.o.gz: init_module: No such device modprobe: insmod/lib/modules/2.4.18-4mdk/kernel/drives/sound/maestro.o.gz failed modprobe: insmod sound-slot-0 failed -- I am happy to provide additional details upon request otherwise I hope the attached info will be helpful in resolving this problem prior to 8.2 GOLD. Joseph :: lsmod.txt :: Module Size Used byNot tainted toshoboe6208 0 (unused) irda 90508 0 [toshoboe] snd-card-es196813728 0 (unused) snd-pcm31616 0 [snd-card-es1968] snd-timer 8576 0 [snd-pcm] snd-mpu401-uart 2512 0 [snd-card-es1968] snd-rawmidi10112 0 [snd-mpu401-uart] snd-seq-device 3948 0 [snd-rawmidi] snd-ac97-codec 24896 0 [snd-card-es1968] snd-mixer 24328 0 [snd-ac97-codec] snd34272 1 [snd-card-es1968 snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec snd-mixer] soundcore 4068 0 [snd] 3c59x 25928 1 ds 6848 2 yenta_socket9344 2 pcmcia_core41824 0 [ds yenta_socket] af_packet 12488 1 (autoclean) ip_vs 65400 0 (autoclean) keybdev 1856 0 (unused) mousedev4160 1 hid18496 0 (unused) usbmouse1984 0 (unused) input 3616 0 [keybdev mousedev hid usbmouse] usb-uhci 21668 0 (unused) usbcore59072 1 [hid usbmouse usb-uhci] supermount 56932 2 (autoclean) rtc 5912 0 (autoclean) reiserfs 169312 1 :: lspcidrake.txt :: agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge [BRIDGE_HOST] (vendor:8086 device:7190 subv:1179 subd:0001) unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge [BRIDGE_PCI] (vendor:8086 device:7191) unknown : Intel Corporation|82371AB PIIX4 ISA [BRIDGE_OTHER] (vendor:8086 device:7110) unknown : Intel Corporation|82371AB PIIX4 IDE [STORAGE_IDE] (vendor:8086 device:7111) usb-uhci: unknown (8086/7112//) [SERIAL_USB] sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller [BRIDGE_OTHER] (vendor:8086 device:7113) Bad:www.linmodems.org: Lucent Microelectronics|56k WinModem [COMMUNICATION_OTHER] (vendor:11c1 device:0441 subv:1179 subd:0001) toshoboe: Toshiba|FIR Port Type-DO (vendor:1179 device:0d01 subv:1179 subd:0001) yenta_socket: Toshiba|ToPIC95 PCI to Cardbus Bridge with ZV Support [BRIDGE_CARDBUS] (vendor:1179 device:0617 subv:4000 subd:) yenta_socket: Toshiba|ToPIC95 PCI to Cardbus Bridge with ZV Support [BRIDGE_CARDBUS] (vendor:1179 device:0617 subv:4800 subd:) maestro : ESS Technology|ES1978 Maestro 2E [MULTIMEDIA_AUDIO] (vendor:125d device:1978 subv:1179 subd:0001) unknown : Trident Microsystems|Cyber 9540 [DISPLAY_VGA] (vendor:1023 device:9540 subv:1179 subd:0001) 3c59x : 3Com Corporation|3c575 [Megahertz] 10/100 LAN CardBus [NETWORK_ETHERNET] (vendor:10b7 device:5157 subv:10b7 subd:5b57) unknown : Virtual|Hub [] (vendor: device:) unknown : Logitech|USB-PS/2 Optical Mouse [Human Interface Devices|Boot Interface Subclass|Mouse] (vendor:046d device:c00e) :: lspci.txt :: 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Subsystem: Toshiba America Info Systems: Unknown device 0001 Flags: bus master, medium devsel, latency 64 Memory at e000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fec0-ff7f 00:05.0 Bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:05.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 I/O ports at fff0 [size=16] 00:05.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at ff80 [size=32] 00:05.3 Bridge: Intel Corp.
[Cooker] RC1 - Installation and drakconf still not detecting TridentCyberblade e4 (Trident 9540) video card properly
When attempting to configure my video card using the drakconf suite of tools, they are not identifying my video card properly. The card in question is a Trident Cyberblade e4 (Trident 9540). when using drakconf it's guess comes up with the card listed as other/unknown. When I manually choose trident/cyberblade (generic) it attempts to install XFree86 3.3.6 rather than 4.2.0. Attached is a working XF86Config-4 file that works with this video card/chipset and runs without issue under XFree86 4.*. Also attached is the output from the following commands: lspci -v lspcidrake -v lsmod Here is a quick and dirty work around to resolve this issue. 0. su to root 1. Install XFree86 Server 4.2 RPM (found on disk1 /Mandrake/RPMS/) 2. Delete the /usr/bin/X11/X symlink (points to Xwrapper) 3. Recreate /usr/bin/X11/X symlink and point it to /usr/bin/X11/XFree86 4. chmod +s XFree86 5. Copy the attached XF86Config-4 file to /etc/X11 6. Run startx and enjoy I am happy to provide additional details upon request otherwise I hope the attached info will be helpful in resolving this issue prior to 8.2 GOLD. Joseph :: lsmod.txt :: Module Size Used byNot tainted toshoboe6208 0 (unused) irda 90508 0 [toshoboe] snd-card-es196813728 0 (unused) snd-pcm31616 0 [snd-card-es1968] snd-timer 8576 0 [snd-pcm] snd-mpu401-uart 2512 0 [snd-card-es1968] snd-rawmidi10112 0 [snd-mpu401-uart] snd-seq-device 3948 0 [snd-rawmidi] snd-ac97-codec 24896 0 [snd-card-es1968] snd-mixer 24328 0 [snd-ac97-codec] snd34272 1 [snd-card-es1968 snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec snd-mixer] soundcore 4068 0 [snd] 3c59x 25928 1 ds 6848 2 yenta_socket9344 2 pcmcia_core41824 0 [ds yenta_socket] af_packet 12488 1 (autoclean) ip_vs 65400 0 (autoclean) keybdev 1856 0 (unused) mousedev4160 1 hid18496 0 (unused) usbmouse1984 0 (unused) input 3616 0 [keybdev mousedev hid usbmouse] usb-uhci 21668 0 (unused) usbcore59072 1 [hid usbmouse usb-uhci] supermount 56932 2 (autoclean) rtc 5912 0 (autoclean) reiserfs 169312 1 :: lspcidrake.txt :: agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge [BRIDGE_HOST] (vendor:8086 device:7190 subv:1179 subd:0001) unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge [BRIDGE_PCI] (vendor:8086 device:7191) unknown : Intel Corporation|82371AB PIIX4 ISA [BRIDGE_OTHER] (vendor:8086 device:7110) unknown : Intel Corporation|82371AB PIIX4 IDE [STORAGE_IDE] (vendor:8086 device:7111) usb-uhci: unknown (8086/7112//) [SERIAL_USB] sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller [BRIDGE_OTHER] (vendor:8086 device:7113) Bad:www.linmodems.org: Lucent Microelectronics|56k WinModem [COMMUNICATION_OTHER] (vendor:11c1 device:0441 subv:1179 subd:0001) toshoboe: Toshiba|FIR Port Type-DO (vendor:1179 device:0d01 subv:1179 subd:0001) yenta_socket: Toshiba|ToPIC95 PCI to Cardbus Bridge with ZV Support [BRIDGE_CARDBUS] (vendor:1179 device:0617 subv:4000 subd:) yenta_socket: Toshiba|ToPIC95 PCI to Cardbus Bridge with ZV Support [BRIDGE_CARDBUS] (vendor:1179 device:0617 subv:4800 subd:) maestro : ESS Technology|ES1978 Maestro 2E [MULTIMEDIA_AUDIO] (vendor:125d device:1978 subv:1179 subd:0001) unknown : Trident Microsystems|Cyber 9540 [DISPLAY_VGA] (vendor:1023 device:9540 subv:1179 subd:0001) 3c59x : 3Com Corporation|3c575 [Megahertz] 10/100 LAN CardBus [NETWORK_ETHERNET] (vendor:10b7 device:5157 subv:10b7 subd:5b57) unknown : Virtual|Hub [] (vendor: device:) unknown : Logitech|USB-PS/2 Optical Mouse [Human Interface Devices|Boot Interface Subclass|Mouse] (vendor:046d device:c00e) :: lspci.txt :: 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Subsystem: Toshiba America Info Systems: Unknown device 0001 Flags: bus master, medium devsel, latency 64 Memory at e000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fec0-ff7f 00:05.0 Bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
[Cooker] Beta4 bug report - XFdrake does not auto detect Trident Cyberblade9540 Video chipset
Beta 4 - Install XFdrake does not propose the correct version of X for the video card Plus the install is defaulting to Framebuffer (works fine btw) Config with XFdrake attempts to install XFree86 336 instead of 42 Work around - - 1 Install XFree86-server-42XXX manually from Disk1 2 chmod +s /usr/bin/X11/XFree86 (the package install fails to suid it?) 3 rm /usr/bin/X11/X 4 ln -s /usr/bin/X11/XFree86 /usr/bin/X11/X 5 copy XF86Config-4 file into /etc/X11 (overwrite existing file if there is one) Attached is a copy of my working XF86Config-4 file lspcidrake output regarding my video card - unknown : Trident Microsystems|Cyber 9540 [DISPLAY_VGA] (vendor:1023 dev ice:9540 subv:1179 subd:0001) - Joseph # File generated by XFdrake. # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** Section Files RgbPath /usr/X11R6/lib/X11/rgb # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath unix/:-1 EndSection # ** # Server flags section. # ** Section ServerFlags # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the CrtlAltBS server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the CrtlAltKP_+/KP_- mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ** # Input devices # ** # ** # Keyboard section # ** Section InputDevice Identifier Keyboard1 Driver Keyboard Option AutoRepeat 250 30 Option XkbRules xfree86 Option XkbModel pc105 Option XkbLayout us EndSection # ** # Pointer section # ** Section InputDevice Identifier Mouse1 Driver mouse Option ProtocolIMPS/2 Option Device /dev/mouse Option ZAxisMapping 4 5 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection Section InputDevice Identifier Mouse2 Driver mouse Option ProtocolPS/2 Option Device /dev/psaux Option Emulate3Buttons Option Emulate3Timeout50 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection Section Module # This loads the DBE extension module. Loaddbe # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod #Option omit xfree86-dga EndSubSection # This loads the Type1 and FreeType font modules Loadtype1 Loadfreetype EndSection # ** # Monitor section # ** # Any number of monitor sections may be present Section Monitor Identifier Generic|Generic Laptop Display Panel 1024x768 VendorName Generic ModelName Unknown # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-48.5 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-70 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024
[Cooker] Beta4 Bug report - Audio still lacking for ES1978S sound chip
Just a couple items (I didnt see these listed in any other posts re:this issue so) /dev/mixer sym link does not exist Tried to config via HardDrake received the following error message: /lib/modules/2418-2mdk/kernel/drives/sound/maestroogz: init_module: No such device modprobe: insmod/lib/modules/2418-2mdk/kernel/drives/sound/maestroogz failed modprobe: insmod sound-slot-0 failed The output of 'lsmod' on my system (run as root) is the following: - [root@snow etc]# lsmod Module Size Used byNot tainted sg 30180 0 (autoclean) (unused) st 27316 0 (autoclean) (unused) sr_mod 15160 0 (autoclean) (unused) sd_mod 11644 0 (autoclean) (unused) scsi_mod 92488 4 (autoclean) [sg st sr_mod sd_mod] parport_pc 22088 1 (autoclean) lp 6464 0 (autoclean) parport23968 1 (autoclean) [parport_pc lp] toshoboe6208 0 (unused) irda 90508 0 [toshoboe] snd-card-es196813728 0 (unused) snd-mpu401-uart 2512 0 [snd-card-es1968] snd-rawmidi10112 0 [snd-mpu401-uart] snd-seq-device 3948 0 [snd-rawmidi] snd-pcm31616 0 [snd-card-es1968] snd-timer 8576 0 [snd-pcm] snd-ac97-codec 24896 0 [snd-card-es1968] snd-mixer 24328 0 [snd-ac97-codec] snd34272 1 [snd-card-es1968 snd-mpu401-uart snd-rawmidi snd-seq-device snd-pcm snd-timer snd-ac97-codec snd-mixer] soundcore 4068 0 [snd] 3c59x 25928 1 ds 6848 2 yenta_socket9344 2 pcmcia_core41824 0 [ds yenta_socket] af_packet 12488 1 (autoclean) ip_vs 65400 0 (autoclean) keybdev 1856 0 (unused) mousedev4160 1 hid18496 0 (unused) usbmouse1984 0 (unused) input 3616 0 [keybdev mousedev hid usbmouse] usb-uhci 21668 0 (unused) usbcore59072 1 [hid usbmouse usb-uhci] supermount 56932 0 (autoclean) rtc 5912 0 (autoclean) reiserfs 169312 1 - The relevant section from lspcidrake - maestro : ESS Technology|ES1978 Maestro 2E [MULTIMEDIA_AUDIO] (vendor:12 5d device:1978 subv:1179 subd:0001) -- Modulesconf -- alias usb-interface usb-uhci alias sound-slot-0 maestro alias eth0 3c59x -- I hope this info helps Joseph
[Cooker] Starting Eterm displays Read only variable message
Sorry if this has already been posted (didnt see it fly by in the list) When starting Eterm - receive silly error msg bash: TMOUT: readonly variable Joseph
[Cooker] Mini-Commander Applet is defaulting to white text on whitebackground
the mini_commander_applet once added to the toolbar displays as white text on white background. Steps to reproduce this error (I'm sure there are other ways, this is just how my setup is) - this is being run as a standard user - no root priv's. 1. Convert the panel to type floating 2. Change tasklist properties to task width height to dynamic 3. run 'mini_commander_applet' to add the applet. 4. view results simple working fix. According to the mini-commander config, the default should be black background with white text. If you change the background and text to both black in the config you will end up with black text on white background. (NOTE: you can reproduce this within VMWare sessions as well). Joseph