[Cooker] [Bug 2243] [Installation] New: 9.1 RC1 - Package dependency dialog boxes fail to close
https://qa.mandrakesoft.com/show_bug.cgi?id=2243 Product: Installation Component: Installation Summary: 9.1 RC1 - Package dependency dialog boxes fail to close Version: 1.791 Platform: PC OS/Version: All Status: RESOLVED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Update -- Testing on RC.2 (network install from ftp) appears to have fixed this issue closing ticket. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 2294] [Hardware] LILO Descriptor Checksum Error
https://qa.mandrakesoft.com/show_bug.cgi?id=2294 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 21:42 --- Additional Details on install layout: 1 hard drive 3 primary 1 extended partitions hda1=winxp sp1+patches formated as NTFS hda2=/boot formated as EXT3 hda3=/ formated as XFS hda5=SWAP hda6=Win32 D drive formated as NTFS RC1 installation details: install RC1 using existing partitions. minimal install // internet workstation + gnome. No additional packages. install boot loader to hda2 (/boot) leaving all other settings as default finish install, reboot. Booting into linux only works the first time after a reboot. Boot into linux. select reboot from gdm login screen. (didnt even bother to log in) LILO - Descriptor checksum error error message. This is coming from the MBR which was supposed to have been left alone? I'll do whatever testing is asked of me to help resolve this issue. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: installed lilo to /dev/hda2 instead of /dev/hda. First boot after installation appears to work and system boots into linux properly. Second boot after installation - LILO descriptor checksum error. Resolving this requires FDISK /MBR from a Win9x boot floppy to restore proper booting. Target system being installed to: Linux Portege 7200CT from pcmcia boot disk. Minimal installation: Gnome+internet workstation
[Cooker] [Bug 2237] [pcmcia-cs-x11] Pcmcia hangs on startup (RC1)
https://qa.mandrakesoft.com/show_bug.cgi?id=2237 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 22:26 --- ok, I've narrowed this down to acpi... I can faithfuly recreate the pcmcia hang issue on my laptop (Toshiba Portege 7200CT) In /etc/lilo.conf if append does not have acpi=off the system should hang while starting pcmcia services. (Dont forget to /sbin/lilo after you modify your config!) So while this bug rears it's head as a PCMCIA issue, it's really an ACPI issue. Hope this helps those of you out there that actually can do the magic to fix this. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting with my Sony Vaio laptop FX-301, pcmcia hangs on startup under the following conditions: - Either an Inserted Hama Compactflash-Reader card (Typ II Adapter) - Or a Self-compiled 2.4.21pre4-6custom kernel (config available on request) It works fine using the same custom kernel (same config) compiled on Mandrake 9.0 with the 9.0 pcmcia package (and with inserted Hama Adapter)
[Cooker] [Bug 2237] [pcmcia-cs-x11] Pcmcia hangs on startup (RC1)
https://qa.mandrakesoft.com/show_bug.cgi?id=2237 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 22:29 --- Reinhard, I believe your laptop should have been trying to load eth0 (which i'm betting was a pcmcia card?) before pcmcia services had started... mine does this as well but this delay is expected. Joseph --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting with my Sony Vaio laptop FX-301, pcmcia hangs on startup under the following conditions: - Either an Inserted Hama Compactflash-Reader card (Typ II Adapter) - Or a Self-compiled 2.4.21pre4-6custom kernel (config available on request) It works fine using the same custom kernel (same config) compiled on Mandrake 9.0 with the 9.0 pcmcia package (and with inserted Hama Adapter)
[Cooker] [Bug 2237] [pcmcia-cs-x11] Pcmcia hangs on startup (RC1)
https://qa.mandrakesoft.com/show_bug.cgi?id=2237 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 01:25 --- I can reproduce this on a Toshiba Portege 7200CT laptop. This occurs with or without any cards in the system. Not enough details to try differnt config's. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting with my Sony Vaio laptop FX-301, pcmcia hangs on startup under the following conditions: - Either an Inserted Hama Compactflash-Reader card (Typ II Adapter) - Or a Self-compiled 2.4.21pre4-6custom kernel (config available on request) It works fine using the same custom kernel (same config) compiled on Mandrake 9.0 with the 9.0 pcmcia package (and with inserted Hama Adapter)
[Cooker] [Bug 2175] [Installation] Individual Package Selection Dependencies in RC1
https://qa.mandrakesoft.com/show_bug.cgi?id=2175 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 01:28 --- I have reproduced this in the english version. Details listed in bug 2243. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: (German version): When doing an individual package selection install, selecting a package having unresolved dependencies works, but when selecting another package with unresolved dependencies on the same page without having moved the page itself the dialog cannot be removed from the page (well actually it can be done with some tricks ;-) Also the mouse flickers as soon as the first package with unresolved dependencies has been selected (flickering disappears after moving the page). I have testet this in the mode where all packages are visible. Reinhard
[Cooker] [Bug 2237] [pcmcia-cs-x11] Pcmcia hangs on startup (RC1)
https://qa.mandrakesoft.com/show_bug.cgi?id=2237 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 06:01 --- Just installed RC-2 (network install from ftp) and the problem still exists. This issue does not exist in 9.0 Additional Details to help recreate this issue: First reboot from install everything works ok. I made the following changes via DrakBoot 1. OS Boot menu display time from 10 seconds to 5 seconds 2. Changed initial boot display for linux from 800x600 frame buffer (I forget the depth) to 1024x768 @ 16 bits 3. removed all useless os boot menu choices leaving only linux and windows (Note: windows=hda1 install of WinXP sp1+patches) 4. Enabled the the Clean /tmp at each reboot checkbox I _Believe_ this to be the cause I will test again later --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting with my Sony Vaio laptop FX-301, pcmcia hangs on startup under the following conditions: - Either an Inserted Hama Compactflash-Reader card (Typ II Adapter) - Or a Self-compiled 2.4.21pre4-6custom kernel (config available on request) It works fine using the same custom kernel (same config) compiled on Mandrake 9.0 with the 9.0 pcmcia package (and with inserted Hama Adapter)
[Cooker] [Bug 2133] [kernel] PCMCIA service freeze my Laptop when it start
https://qa.mandrakesoft.com/show_bug.cgi?id=2133 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 06:04 --- This happens on my Laptop as well. I'm adding details to my bug hunting to bug#2237 --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Excuse me for this ; i don't know where to put this bug. It seem there is not PCMCIA section on the site. I've a laptop Toshiba Satellite pro 4290 and a PCMCIA network card D-Link DFE-650. Installation process seem to be good. But just after install, when system boot, it freeze when pcmcia service start. I've tryed to boot in interactive mode. The system boot correctly. But when I type in a console service pcmcia start or /etc/init.d/pcmcia start, my system freeze. I've re-install my system, but the problem is same.
