Re: [Cooker] Realtek RTL8029(AS) doesn't work
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Gerard Patel wrote on Sat, Feb 15, 2003 at 03:24:21PM +0100 : eth1 Lien encap:Ethernet HWaddr 00:00:05:FD:B4:64 inet adr:192.168.0.101 Bcast:192.168.0.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:461 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:100 RX bytes:69085 (67.4 Kb) TX bytes:986 (986.0 b) Interruption:11 Adresse de base:0xc000 He brings up a good point. To the original author, you've tried noacpi, but what about noapic? Blue skies... Todd - -- Todd Lyons -- MandrakeSoft, Inc. http://www.mandrakesoft.com/ UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things. -- Doug Gwyn Mandrake Cooker Devel Version, Kernel 2.4.21pre4-5mdk -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+Up/glp7v05cW2woRAreOAJ41zEx7rbGPSL6eiTsNwN37tMoxmQCfaGh4 LnAodgKfke7NoMtW7he35GE= =7X9H -END PGP SIGNATURE-
Re: [Cooker] Realtek RTL8029(AS) doesn't work
utuhiro [EMAIL PROTECTED] writes: What does 'ifstatus -v' tell you? (after downgrade initscripts from 9.0) [root@localhost]# ifstatus -v eth0: SIOCETHTOOL failed (Operation not supported) SIOGGMIIPHY failed (Operation not supported) SIOCDEVPRIVATE failed (Operation not supported) eth1: SIOCETHTOOL failed (No such device) SIOGGMIIPHY failed (No such device) SIOCDEVPRIVATE failed (No such device) -snip- eth9: SIOCETHTOOL failed (No such device) SIOGGMIIPHY failed (No such device) SIOCDEVPRIVATE failed (No such device) the driver does support neither ethtool nor older ioctls. this is the same bug as of 3com 3c9x cards. you can confirm it by setting MII_NOT_SUPPORTED in ifcfg*eth0 hopefully, drakconnect will offer to disable ifplugd
Re: [Cooker] Realtek RTL8029(AS) doesn't work
At 12:41 AM 2/16/03 +0900, you wrote: I use Celeron850mhz+i815+RTL8029(AS). The most important thing is that mdk9.0 has no problem and in mdk9.1, I can't get the connection. I give up mdk9.1beta, and I'll try mdk9.1final. I can't enable ACPI on my computer because my bios is blacklisted, so I can't do any other test. If you are unsure of this, check /proc/acpi. If it exists, acpi is enabled on your computer. Or check /var/log/messages. Gerard
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On Sat, 2003-02-15 at 09:21, utuhiro wrote: I use Realtek RTL8029(AS) ethernet board and I cannot connect to the internet. It works fine on mdk9.0, but it doesn't work on the latest cooker. I did drakconnect with: kernel-2.4.21.0.pre4.6mdk-1-1mdk.i586.rpm (latest cooker kernel) kernel-2.4.19.16mdk-1-1mdk.i586.rpm (mdk9.0 kernel) kernel-2.4.19.24mdk-1-1mdk.i586.rpm (mdk9.0 latest update) but no success. then I copied mdk9.0's /etc/rc.d/init.d/network to mdk9.1's one, but it doesn't work. I added acpi=off to /etc/lilo.conf but no success. Remember to always run lilo (as root) after editing lilo.conf. Changes aren't applied until you do this. -- adamw
Re: [Cooker] Realtek RTL8029(AS) doesn't work
Remember to always run lilo (as root) after editing lilo.conf. Changes aren't applied until you do this. I've already done it. I don't think it's a kernel problem, because RTL8029(AS) works well on the kernel-2.4.19.16mdk-1-1mdk in mdk9.0. It works fine without extra kernel settings in mdk9.0. See also http://marc.theaimsgroup.com/?l=mandrake-cookerm=104500222908878w=2 He has a same board too and he cannot get the internet connection. Thanks anyway. --- Adam Williamson [EMAIL PROTECTED] wrote: On Sat, 2003-02-15 at 09:21, utuhiro wrote: I use Realtek RTL8029(AS) ethernet board and I cannot connect to the internet. It works fine on mdk9.0, but it doesn't work on the latest cooker. I did drakconnect with: kernel-2.4.21.0.pre4.6mdk-1-1mdk.i586.rpm (latest cooker kernel) kernel-2.4.19.16mdk-1-1mdk.i586.rpm (mdk9.0 kernel) kernel-2.4.19.24mdk-1-1mdk.i586.rpm (mdk9.0 latest update) but no success. then I copied mdk9.0's /etc/rc.d/init.d/network to mdk9.1's one, but it doesn't work. I added acpi=off to /etc/lilo.conf but no success. Remember to always run lilo (as root) after editing lilo.conf. Changes aren't applied until you do this. -- adamw
Re: [Cooker] Realtek RTL8029(AS) doesn't work
At 10:51 PM 2/15/03 +0900, you (utuhiro) wrote: I don't think it's a kernel problem, because RTL8029(AS) works well on the kernel-2.4.19.16mdk-1-1mdk in mdk9.0. It works fine without extra kernel settings in mdk9.0. One of my network cards identify itself as a RTL8029(AS) and it seems to work. Master Capable. Latency=32. I/O at 0xbc00 [0xbc7f]. Non-prefetchable 32 bit memory at 0xd680 [0xd680007f]. Bus 0, device 20, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0). IRQ 11. Feb 15 09:23:03 duron kernel: PCI: Found IRQ 11 for device 00:14.0 Feb 15 09:23:03 duron kernel: PCI: Sharing IRQ 11 with 00:07.2 Feb 15 09:23:03 duron kernel: PCI: Sharing IRQ 11 with 00:07.3 Feb 15 09:23:03 duron kernel: eth1: RealTek RTL-8029 found at 0xc000, IRQ 11, 00:00:05:FD:B4:64. eth1 Lien encap:Ethernet HWaddr 00:00:05:FD:B4:64 inet adr:192.168.0.101 Bcast:192.168.0.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:461 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:100 RX bytes:69085 (67.4 Kb) TX bytes:986 (986.0 b) Interruption:11 Adresse de base:0xc000 It may be another problem (or there are several chipset implementations :-/) Gerard
Re: [Cooker] Realtek RTL8029(AS) doesn't work
One of my network cards identify itself as a RTL8029(AS) and it seems to work. I use Celeron850mhz+i815+RTL8029(AS). The most important thing is that mdk9.0 has no problem and in mdk9.1, I can't get the connection. I give up mdk9.1beta, and I'll try mdk9.1final. Thank you, Gerard. --- Gerard Patel [EMAIL PROTECTED] wrote: At 10:51 PM 2/15/03 +0900, you (utuhiro) wrote: I don't think it's a kernel problem, because RTL8029(AS) works well on the kernel-2.4.19.16mdk-1-1mdk in mdk9.0. It works fine without extra kernel settings in mdk9.0. One of my network cards identify itself as a RTL8029(AS) and it seems to work. Master Capable. Latency=32. I/O at 0xbc00 [0xbc7f]. Non-prefetchable 32 bit memory at 0xd680 [0xd680007f]. Bus 0, device 20, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0). IRQ 11. Feb 15 09:23:03 duron kernel: PCI: Found IRQ 11 for device 00:14.0 Feb 15 09:23:03 duron kernel: PCI: Sharing IRQ 11 with 00:07.2 Feb 15 09:23:03 duron kernel: PCI: Sharing IRQ 11 with 00:07.3 Feb 15 09:23:03 duron kernel: eth1: RealTek RTL-8029 found at 0xc000, IRQ 11, 00:00:05:FD:B4:64. eth1 Lien encap:Ethernet HWaddr 00:00:05:FD:B4:64 inet adr:192.168.0.101 Bcast:192.168.0.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:461 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:100 RX bytes:69085 (67.4 Kb) TX bytes:986 (986.0 b) Interruption:11 Adresse de base:0xc000 It may be another problem (or there are several chipset implementations :-/) Gerard
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On Sun, 16 Feb 2003, utuhiro wrote: One of my network cards identify itself as a RTL8029(AS) and it seems to work. I use Celeron850mhz+i815+RTL8029(AS). The most important thing is that mdk9.0 has no problem and in mdk9.1, I can't get the connection. I give up mdk9.1beta, and I'll try mdk9.1final. Well, chances of getting it fixed are better if you can try some more experiments. Have you tried updating to the latest version of initscripts? I know the ne2k-pci driver doesn't support ifplugd, so it may have been affected. Also, you could try installing the initscripts from 9.0. Are you using dhcp? What does 'ifstatus -v' tell you? Buchan -- |Registered Linux User #182071-| Buchan MilneMechanical Engineer, Network Manager Cellphone * Work+27 82 472 2231 * +27 21 8828820x121 Stellenbosch Automotive Engineering http://www.cae.co.za GPG Key http://ranger.dnsalias.com/bgmilne.asc 1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7
Re: [Cooker] Realtek RTL8029(AS) doesn't work
Have you tried updating to the latest version of initscripts? Yes. I use initscripts-7.06-4mdk.i586.rpm. Also, you could try installing the initscripts from 9.0. It's dangerous..but I did it. I can't get the connection. What does 'ifstatus -v' tell you? (after downgrade initscripts from 9.0) [root@localhost]# ifstatus -v eth0: SIOCETHTOOL failed (Operation not supported) SIOGGMIIPHY failed (Operation not supported) SIOCDEVPRIVATE failed (Operation not supported) eth1: SIOCETHTOOL failed (No such device) SIOGGMIIPHY failed (No such device) SIOCDEVPRIVATE failed (No such device) -snip- eth9: SIOCETHTOOL failed (No such device) SIOGGMIIPHY failed (No such device) SIOCDEVPRIVATE failed (No such device) mmm..something goes wrong. I don't use my machine without the internet connection. I'll change the distro soon, and I'll test the next beta(maybe RC1). Thank you so much, Buchan! Good Night, everyone. It's 2:27AM in Japan :) --- Buchan Milne [EMAIL PROTECTED] wrote: On Sun, 16 Feb 2003, utuhiro wrote: One of my network cards identify itself as a RTL8029(AS) and it seems to work. I use Celeron850mhz+i815+RTL8029(AS). The most important thing is that mdk9.0 has no problem and in mdk9.1, I can't get the connection. I give up mdk9.1beta, and I'll try mdk9.1final. Well, chances of getting it fixed are better if you can try some more experiments. Have you tried updating to the latest version of initscripts? I know the ne2k-pci driver doesn't support ifplugd, so it may have been affected. Also, you could try installing the initscripts from 9.0. Are you using dhcp? What does 'ifstatus -v' tell you? Buchan
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On Saturday 15 February 2003 9:41 am, utuhiro wrote: One of my network cards identify itself as a RTL8029(AS) and it seems to work. I use Celeron850mhz+i815+RTL8029(AS). The most important thing is that mdk9.0 has no problem and in mdk9.1, I can't get the connection. I give up mdk9.1beta, and I'll try mdk9.1final. Thank you, Gerard. *snip* it's not a problem with mandrake, it's a problem with the kernel. I also had problems with a different network card similarly. acpi=off in lilo.conf worked on the newer kernels. Oh, and the reason it worked in 9.0 is because the 2.4.19 kernel that ships with 9.0 has acpi disabled by default. -- Chuck Burns [EMAIL PROTECTED]
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On Thu, 13 Feb 2003, Chuck Burns wrote: *snip* it's not a problem with mandrake, it's a problem with the kernel. I also had problems with a different network card similarly. acpi=off in lilo.conf worked on the newer kernels. Oh, and the reason it worked in 9.0 is because the 2.4.19 kernel that ships with 9.0 has acpi disabled by default. Except that he has tried: 1) acpi=off with the cooker/beta kernel 2) 2.4.19-16mdk So, it doesn't look like acpi ... -- |Registered Linux User #182071-| Buchan MilneMechanical Engineer, Network Manager Cellphone * Work+27 82 472 2231 * +27 21 8828820x121 Stellenbosch Automotive Engineering http://www.cae.co.za GPG Key http://ranger.dnsalias.com/bgmilne.asc 1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On Sat, 2003-02-15 at 13:51, utuhiro wrote: Remember to always run lilo (as root) after editing lilo.conf. Changes aren't applied until you do this. I've already done it. I don't think it's a kernel problem, because RTL8029(AS) works well on the kernel-2.4.19.16mdk-1-1mdk in mdk9.0. It works fine without extra kernel settings in mdk9.0. See also http://marc.theaimsgroup.com/?l=mandrake-cookerm=104500222908878w=2 He has a same board too and he cannot get the internet connection. Thanks anyway. The 9.0 kernel doesn't use ACPI by default. The Cooker kernels do. I have one of these cards too, and it works fine for me. (ne2k-pci driver). ne2k-pci: Realtek|RTL-8029(AS) [NETWORK_ETHERNET] (vendor:10ec device:8029) Is sending this message to you right now...=) -- adamw
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On Sat, 2003-02-15 at 17:37, Buchan Milne wrote: On Thu, 13 Feb 2003, Chuck Burns wrote: *snip* it's not a problem with mandrake, it's a problem with the kernel. I also had problems with a different network card similarly. acpi=off in lilo.conf worked on the newer kernels. Oh, and the reason it worked in 9.0 is because the 2.4.19 kernel that ships with 9.0 has acpi disabled by default. Except that he has tried: 1) acpi=off with the cooker/beta kernel 2) 2.4.19-16mdk So, it doesn't look like acpi ... He said it *WORKED* on 2.4.19-16mdk. And there've been enough people who've used acpi=off wrongly, either putting it in the wrong place in lilo.conf or not running lilo... -- adamw
Re: [Cooker] Realtek RTL8029(AS) doesn't work
On 15 Feb 2003, Adam Williamson wrote: Except that he has tried: 1) acpi=off with the cooker/beta kernel 2) 2.4.19-16mdk So, it doesn't look like acpi ... He said it *WORKED* on 2.4.19-16mdk. On 9.0, yes. But (as I read his mail), it did not work on the beta/cooker with 2.4.19-16mdk. And there've been enough people who've used acpi=off wrongly, either putting it in the wrong place in lilo.conf or not running lilo... Well, we should really have asked him to note these with his test: # uname -a # cat /proc/cmdline Buchan -- |Registered Linux User #182071-| Buchan MilneMechanical Engineer, Network Manager Cellphone * Work+27 82 472 2231 * +27 21 8828820x121 Stellenbosch Automotive Engineering http://www.cae.co.za GPG Key http://ranger.dnsalias.com/bgmilne.asc 1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7