etch/powerbook G4 wlan/wpa not working
Hello, I don't get wlan with wpa working on my powerbook g4 with etch. This is the lspci output: 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) This is my /etc/network/interfaces file: auto eth2 iface eth2 inet manual wpa-sriver wext wpa-roam/etc/wpa_supplicant/wpa_supplicant.conf iface office inet dhcp iface anywhere inet dhcp This is my /etc/wpa_supplicant/wpa_supplicant.conf: ctrl_interface=/var/run/wpa_supplicant network={ id_str="office" ssid="gh-office-wlan" # = airport network name psk="64-byte hex-string obtained with wpa_passphrase" } network={ id_str="anywhere" ssid="" key_mgmt=NONE } The network-admin says "wireless network eth2 active" but under properties, the network is not selected. It appears in the pop-up menu though and I can select it, but afterwards ping returns "network unreachable". There is no wpa_action.log file in /var/log. Any ideas? Thanks in advance, G. Heinrich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch/powerbook G4 wlan/wpa not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 hi, Georg Heinrich wrote: > I don't get wlan with wpa working on my powerbook g4 with etch. you probably need bcm43xxx-fwcutter package. i wrote up how i got mine working: http://travelsoforion.net/debian-wireless --asm > This is the lspci output: > > 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g > Wireless LAN Controller (rev 03) > > This is my /etc/network/interfaces file: > > auto eth2 > iface eth2 inet manual > wpa-sriver wext > wpa-roam/etc/wpa_supplicant/wpa_supplicant.conf > > iface office inet dhcp > > iface anywhere inet dhcp > > This is my /etc/wpa_supplicant/wpa_supplicant.conf: > > ctrl_interface=/var/run/wpa_supplicant > > network={ > id_str="office" > ssid="gh-office-wlan" # = airport network name > psk="64-byte hex-string obtained with wpa_passphrase" > } > > network={ > id_str="anywhere" > ssid="" > key_mgmt=NONE > } > > The network-admin says "wireless network eth2 active" but under > properties, the network is not selected. It appears in the pop-up menu > though and I can select it, but afterwards ping returns "network unreachable". > There is no wpa_action.log file in /var/log. > > Any ideas? > Thanks in advance, > > G. Heinrich > > > -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGX7MlDSUj23OxwYIRAttGAJ9B6+iDUglYiKtQxCTSo4Ue049ttgCaAyt1 4OQzNl8d0O9xO6CA5+FUjTU= =kYYw -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch/powerbook G4 wlan/wpa not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Am 01.06.2007 um 07:48 schrieb Andrei Morgan: Georg Heinrich wrote: I don't get wlan with wpa working on my powerbook g4 with etch. you probably need bcm43xxx-fwcutter package. i wrote up how i got mine working: http://travelsoforion.net/debian-wireless Hello to everyone, you get the bcm43xx-fwcutter package after activating non-free in your apt sources.list. You can do that within synaptic too. You can not only select, download and install the fwcutter package, you will be asked during configuration if the firmware should be downloaded, too. No need to read anything ;-) BTW I missed the wpa_supplicant.conf file. It wasn't installed and it's not in the wpa_supplicant package for ppc. I found the original one on the net with all the information in it. Next remark: Don't trust the network-manager. Check everything, resolv.conf, /etc/network/interfaces and bring up the interface with ifdown eth2; ifup eth2 Don't trust the network-manager, check for a default route, too. Just my 2 cents and my humble experience. Ralf -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (Darwin) iD8DBQFGX8aytKcsE7vsbMERAiDfAJ0WHoZWBgphThuvxgfsZYBEFv+j0wCbBov3 gcsCI68qMc7dzmLkhdbyK1o= =Id6j -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch/powerbook G4 wlan/wpa not working
On 6/1/07, Georg Heinrich <[EMAIL PROTECTED]> wrote: Hello, I don't get wlan with wpa working on my powerbook g4 with etch. This is the lspci output: 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) This is my /etc/network/interfaces file: auto eth2 iface eth2 inet manual wpa-sriver wext wpa-driver ?? It's a "d" ? Best regards, Bin wpa-roam/etc/wpa_supplicant/wpa_supplicant.conf iface office inet dhcp iface anywhere inet dhcp This is my /etc/wpa_supplicant/wpa_supplicant.conf: ctrl_interface=/var/run/wpa_supplicant network={ id_str="office" ssid="gh-office-wlan" # = airport network name psk="64-byte hex-string obtained with wpa_passphrase" } network={ id_str="anywhere" ssid="" key_mgmt=NONE } The network-admin says "wireless network eth2 active" but under properties, the network is not selected. It appears in the pop-up menu though and I can select it, but afterwards ping returns "network unreachable". There is no wpa_action.log file in /var/log. Any ideas? Thanks in advance, G. Heinrich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch/powerbook G4 wlan/wpa not working
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 hi, ralf wrote: > > Am 01.06.2007 um 07:48 schrieb Andrei Morgan: > >> Georg Heinrich wrote: >>> I don't get wlan with wpa working on my powerbook g4 with etch. > >> you probably need bcm43xxx-fwcutter package. i wrote up how i got mine >> working: http://travelsoforion.net/debian-wireless > > Hello to everyone, > > you get the bcm43xx-fwcutter package after activating non-free in your > apt sources.list. You can do that within synaptic too. correct: this is something i should probably mention in the guide i wrote. > You can not only select, download and install the fwcutter package, you > will be asked during configuration if the firmware should be downloaded, > too. > > No need to read anything ;-) mmm, disagree here: i had great difficulty in getting this working a few weeks ago. some simple instructions somewhere would have been really useful for me to have - although i agree it is very easy (once you know how) > BTW I missed the wpa_supplicant.conf file. It wasn't installed and it's > not in the wpa_supplicant package for ppc. I found the original one on > the net with all the information in it. > > Next remark: Don't trust the network-manager. Check everything, > resolv.conf, /etc/network/interfaces and bring up the interface with > ifdown eth2; ifup eth2 agree with this, too: it's what i do all the time now, although one day i should probably figure out something a bit more sophisticated :) best, --asm > Don't trust the network-manager, check for a default route, too. > > Just my 2 cents and my humble experience. > > Ralf -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGX8tlDSUj23OxwYIRApjcAKCSoZGgpjQYjuPvaqldIQs1m35/IgCg6o9H wzM3RVHjOR2Q9lOlZhHG75k= =555J -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]