Re: Debian-Sparc on a Sun Ultra10
On 2010-03-31, Chris Liddell wrote: I had the same problem on my Blade 1000, and Jurij kindly pointed my at the solution, so I'll quote: This is a known problem. Kernel 2.6.30 incorrectly reported machine type to the installer, so SILO was installing incorrect bootloader (intended for 32-bit machines) during the installation, causing this boot failure. See the following message: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=570264#10 which includes a workaround for it. It will get fixed automatically once we get newer kernel for the installer images, daily images might already have 2.6.32, which should work out of the box. I just installed using this (March 22) netinst iso on my Ultra 5 and SILO booted successfully. http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/sparc/iso-cd/ It uses kernel 2.6.32-3-sparc64. I guess my previous response about warm booting after Solaris 10 was a red herring. Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/bcrd87-0ti@gonif.dnyndns.org
Debian-Sparc on a Sun Ultra10
Hello, i have a Sun Ultra 10, 440mhz UltraSparc IIi CPU + 1gb Ram + 60gb IDE-HDD. After the Install via Netboot, i type boot disk, and i became this Error: Booting with command: boot disk Boot device: disk Fast Data Access MMU MISS ok Solaris 10 works fine, i think the Hardware is okay, but i dont know how i can start Debiansparc. What i have to do to start Debian-Sparc. So Long M
Re: Debian-Sparc on a Sun Ultra10
hi |Fast Data Access MMU MISS i have a same problem, it 's about silo error, it work on 32bit, i don't know how to activate 64bit. see you philo | M. S a écrit : Hello, i have a Sun Ultra 10, 440mhz UltraSparc IIi CPU + 1gb Ram + 60gb IDE-HDD. After the Install via Netboot, i type boot disk, and i became this Error: |Booting with command: boot disk Boot device: disk Fast Data Access MMU MISS ok Solaris 10 works fine, i think the Hardware is okay, but i dont know how i can start Debiansparc. What i have to do to start Debian-Sparc. So Long M | -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4bb31bad.1070...@orange.fr
Re: Debian-Sparc on a Sun Ultra10
On 2010-03-31, M. S wrote: i have a Sun Ultra 10, 440mhz UltraSparc IIi CPU + 1gb Ram + 60gb IDE-HDD. After the Install via Netboot, i type boot disk, and i became this Error: Booting with command: boot disk Boot device: disk Fast Data Access MMU MISS ok Solaris 10 works fine, i think the Hardware is okay, but i dont know how i can start Debiansparc. What i have to do to start Debian-Sparc. Is that a cold boot to Debian-sparc or a warm reboot after running Solaris 10? Debian-sparc boots fine on my Ultra 5 and 10, but that's all I have on them and it has been quite a while since installed it. I have both Debian-sparc and Solaris 10 on an Ultra 60 and get a Memory Address not Aligned error if I try to reboot to Debian after running Solaris. It boots fine if I power-off and boot cold. Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/nlhb87-ut2@gonif.dnyndns.org
Re: Debian-Sparc on a Sun Ultra10
I had the same problem on my Blade 1000, and Jurij kindly pointed my at the solution, so I'll quote: This is a known problem. Kernel 2.6.30 incorrectly reported machine type to the installer, so SILO was installing incorrect bootloader (intended for 32-bit machines) during the installation, causing this boot failure. See the following message: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=570264#10 which includes a workaround for it. It will get fixed automatically once we get newer kernel for the installer images, daily images might already have 2.6.32, which should work out of the box. HTH, Chris On 31/03/2010 10:53, philo wrote: hi |Fast Data Access MMU MISS i have a same problem, it 's about silo error, it work on 32bit, i don't know how to activate 64bit. see you philo | M. S a écrit : Hello, i have a Sun Ultra 10, 440mhz UltraSparc IIi CPU + 1gb Ram + 60gb IDE-HDD. After the Install via Netboot, i type boot disk, and i became this Error: |Booting with command: boot disk Boot device: disk Fast Data Access MMU MISS ok Solaris 10 works fine, i think the Hardware is okay, but i dont know how i can start Debiansparc. What i have to do to start Debian-Sparc. So Long M | No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.791 / Virus Database: 271.1.1/2780 - Release Date: 03/30/10 19:32:00 -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4bb32784.5080...@spamcop.net
Re: Debian-Sparc on a Sun Ultra10
- Original Message - From: Howard Eisenberger howa...@gmx.net To: debian-sparc@lists.debian.org Sent: Wednesday, March 31, 2010 3:36 AM Subject: Re: Debian-Sparc on a Sun Ultra10 Debian-sparc boots fine on my Ultra 5 and 10, but that's all I have on them and it has been quite a while since installed it. I have used Debian on my Ultra 1, and it installed fine using a 2.4 kernel, but when the 2.6 kernels came out, my machine would not run on them. I had to compile a custom kernel to upgrade to 2.6. I don't know if the stock 2.6 kernels have been fixed - it was a long time ago (5 years?) that I first installed my machine, and I'm not sure when I updated to 2.6. Jim -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/d40b725f54eb44679d17815498b73...@jimm