Re: laptop netconfig
On Mon, May 24, 1999 at 07:25:23PM -0500, Justin Hagemeier wrote: > > Well I sort of do this already I have a laptop that has the Potato distro > > on it, I use both ethernet and ppp, > > I am using the DHCP client in potato and it works great; if there is no > > ethernet connection, then no IP is assigned > > to the eth0 interface, essentially no route. I just use PPP normal. > > -- > > *--* Mail: [EMAIL PROTECTED] > > *--* Voice: 425.739.4247 > > *--* Fax: 425.827.9577 > > *--* HTTP://www.otak-k.com/~lawrence/ > > -- > > - - - - - - O t a k i n c . - - - - - > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > How do you get over the problem with dhcp(potato) hanging when there is no > net connection? I don't it does not hang on my system, it does try to configure it's self, but does not hang. >dhcpcd just sits there if it cannot find one. (or at least I have never been >patient enough to wait it out, I give it about 30 s> and give up) just >installing both would be great for now if that worked. At least on my system it does work, kinda cludgy but it works. You can always take the card out. > > Although, I would like a scheme where it starts the right daemon because it > could potentially less time and memory than starting both. Jens you are > right about error trapping kernel message would be brain dead. However > ifconfig STDOUT does give you how many packets are received, if you sent 1 > and did not receive any in reply the > you have a smarter way of knowing whether or not you have a live line. You > could use regex to parse that ifconfig STDOUT in the script. I am reaching > here.:-) I think, that the DHCP, should time out, after a arbitrary amount of configuration requests, like 100 or so. A more elegant solution must be out there; I know that 95/98/NT have this problem also, so it's not easy. > > What do you think? > > Thanks, > haggs > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > -- *--* Mail: [EMAIL PROTECTED] *--* Voice: 425.739.4247 *--* Fax: 425.827.9577 *--* HTTP://www.otak-k.com/~lawrence/ -- - - - - - - O t a k i n c . - - - - -
Re: laptop netconfig
> Well I sort of do this allready I have a laptop that has the Potato distro on > it, I use both ethernet and ppp, > I am using the DHCP client in potato and it works great; if there is no > ethernet connection, then no IP is assigned > to the eth0 interface, essentially no route. I just use PPP normaly. > -- > *--* Mail: [EMAIL PROTECTED] > *--* Voice: 425.739.4247 > *--* Fax: 425.827.9577 > *--* HTTP://www.otak-k.com/~lawrence/ > -- > - - - - - - O t a k i n c . - - - - - > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null How do you get over the problem with dhcp(potato) hanging when there is no net connection? dhcpcd just sits there if it cannot find one. (or atleast I have never been patient enough to wait it out, I give it about 30 s and give up) just installing both would be great for now if that worked. Although, I would like a scheme where it starts the right daemon because it could protentially less time and memory than starting both. Jens you are right about error trapping kernel message would be brain dead. However ifconfig STDOUT does give you how many packets are recieved, if you sent 1 and did not recieve any in reply the you have a smarter way of knowing whether or not you have a live line. You could use regex to parse that ifconfig STDOUT in the script. I am reaching here.:-) What do you think? Thanks, haggs
NDN(2): Re: laptop netconfig
Sorry. Your message could not be delivered to: Jorge Araya (Mailbox or Conference is full.)
NDN: Re: laptop netconfig
Sorry. Your message could not be delivered to: Jorge Araya (Mailbox or Conference is full.)
NDN: Re: laptop netconfig
Sorry. Your message could not be delivered to: Jorge Araya (Mailbox or Conference is full.)
NDN: Re: laptop netconfig
Sorry. Your message could not be delivered to: Jorge Araya (Mailbox or Conference is full.)
NDN: Re: laptop netconfig
Sorry. Your message could not be delivered to: Jorge Araya (Mailbox or Conference is full.)
Re: laptop netconfig
On Mon, May 24, 1999 at 02:07:19PM -0500, Jens B. Jorgensen wrote: > I don't know if anyone's come up with a slick way to do this. I too would > like to have such a thing at my disposal. You might be able to do something > like this by just running dhcp and then checking to see if dhcp succeeded in > getting an address and starting diald if it didn't. > > Good luck, > > Justin Hagemeier wrote: > > > I have a laptop with three possible network configurations that I would > > like to use. > > 1. Ethernet 10 Mbps DHCP-sv > > 2. PPP daild > > 3. None at all > > is there any suggestions on tools for configuration techniques for this > > kind of setup. It looks as if I could do it if one of the init.d scripts > > sniffed out the PCMCIA to see if there where activity, then if there was > > not it would start daild instead of DHCP. I have no idea where to begin on > > such a thing though. Any thoughts? > > Thanks in advance, > > Justin > > -- > Jens B. Jorgensen > [EMAIL PROTECTED] > > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > Well I sort of do this allready I have a laptop that has the Potato distro on it, I use both ethernet and ppp, I am using the DHCP client in potato and it works great; if there is no ethernet connection, then no IP is assigned to the eth0 interface, essentially no route. I just use PPP normaly. -- *--* Mail: [EMAIL PROTECTED] *--* Voice: 425.739.4247 *--* Fax: 425.827.9577 *--* HTTP://www.otak-k.com/~lawrence/ -- - - - - - - O t a k i n c . - - - - -
Re: laptop netconfig
Since the ethernet driver will detect carrier on the ethernet if you could detect the error correctly you'd be able to know if the ethernet was hooked up. Trying to send a packet is easy. Trapping the error correctly may be the hard part. If the kernel would log such a message then you could just monitor the log. This is a kind of braindead approach but may be the least intrusive and easiest. Justin Hagemeier wrote: > "Jens B. Jorgensen" wrote: > > > I don't know if anyone's come up with a slick way to do this. I too would > > like to have such a thing at my disposal. You might be able to do something > > like this by just running dhcp and then checking to see if dhcp succeeded > > in getting an address and starting diald if it didn't. > > > > Good luck, > > > > Justin Hagemeier wrote: > > > > > I have a laptop with three possible network configurations that I would > > > like to use. > > > 1. Ethernet 10 Mbps DHCP-sv > > > 2. PPP daild > > > 3. None at all > > > is there any suggestions on tools for configuration techniques for this > > > kind of setup. It looks as if I could do it if one of the init.d scripts > > > sniffed out the PCMCIA to see if there where activity, then if there was > > > not it would start daild instead of DHCP. I have no idea where to begin > > > on such a thing though. Any thoughts? > > > Thanks in advance, > > > Justin > > > > -- > > Jens B. Jorgensen > > [EMAIL PROTECTED] > > Would anybody like give some input on developing this? I was thinking about > using ifconfig in a script to temporarily configure the networks so that it > might "feel" for a network pulse over the ether net. If no pulse is felt > then it will start daild, otherwise it would start dhcpcd, then make a script > called net-switch that would > allow you to stop dhcpcd and start daild on the fly or vice-verse. The > problem with accomplishing the net selection with DHCP is that the boot > script will just hang if it can't find an address, and I have never been > patient enough to wait for it to time out(if it does at all). I asked if > anyone had done it because I did not want > to go around re-inventing the wheel. Tell me what you all think. > Regards, > haggs -- Jens B. Jorgensen [EMAIL PROTECTED]
Re: laptop netconfig
"Jens B. Jorgensen" wrote: > I don't know if anyone's come up with a slick way to do this. I too would > like to have such a thing at my disposal. You might be able to do something > like this by just running dhcp and then checking to see if dhcp succeeded in > getting an address and starting diald if it didn't. > > Good luck, > > Justin Hagemeier wrote: > > > I have a laptop with three possible network configurations that I would > > like to use. > > 1. Ethernet 10 Mbps DHCP-sv > > 2. PPP daild > > 3. None at all > > is there any suggestions on tools for configuration techniques for this > > kind of setup. It looks as if I could do it if one of the init.d scripts > > sniffed out the PCMCIA to see if there where activity, then if there was > > not it would start daild instead of DHCP. I have no idea where to begin on > > such a thing though. Any thoughts? > > Thanks in advance, > > Justin > > -- > Jens B. Jorgensen > [EMAIL PROTECTED] Would anybody like give some input on developing this? I was thinking about using ifconfig in a script to temporarily configure the networks so that it might "feel" for a network pulse over the ether net. If no pulse is felt then it will start daild, otherwise it would start dhcpcd, then make a script called net-switch that would allow you to stop dhcpcd and start daild on the fly or vice-verse. The problem with accomplishing the net selection with DHCP is that the boot script will just hang if it can't find an address, and I have never been patient enough to wait for it to time out(if it does at all). I asked if anyone had done it because I did not want to go around re-inventing the wheel. Tell me what you all think. Regards, haggs
Re: laptop netconfig
I don't know if anyone's come up with a slick way to do this. I too would like to have such a thing at my disposal. You might be able to do something like this by just running dhcp and then checking to see if dhcp succeeded in getting an address and starting diald if it didn't. Good luck, Justin Hagemeier wrote: > I have a laptop with three possible network configurations that I would like > to use. > 1. Ethernet 10 Mbps DHCP-sv > 2. PPP daild > 3. None at all > is there any suggestions on tools for configuration techniques for this kind > of setup. It looks as if I could do it if one of the init.d scripts sniffed > out the PCMCIA to see if there where activity, then if there was not it would > start daild instead of DHCP. I have no idea where to begin on such a thing > though. Any thoughts? > Thanks in advance, > Justin -- Jens B. Jorgensen [EMAIL PROTECTED]
