Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
In addition to my 12 and 5 inch Post slide rules, I have my Dad's K&E. Bob On Fri, Aug 15, 2014 at 12:57 PM, Fred Jensen wrote: > I still have my 12" K&E Log-Log Duplex Vector rule, here on the desk, and > I use it for a few things for which I can't remember the equations but I do > remember the motions. Every so much quicker than looking functions up in > the HP48GX books. I mourn the final demise of the HP41CX. The case for > the rule is long gone. > > 73, > > Fred K6DGW > - Northern California Contest Club > - CU in the 2014 Cal QSO Party 4-5 Oct 2014 > - www.cqp.org > > On 8/14/2014 7:45 PM, Don Wilhelm wrote: > >> I still have my 12 inch Post slide rule, but I no longer have it on my >> belt. >> I also have my 5 inch Post, but it is no longer in my shirt pocket. >> Those days are gone, but there "was a time" when they were required >> apparel if one was to succeed in engineering school and after. >> >> 73, >> Don W3FPR >> > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rfri...@usa.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
I still have my 12" K&E Log-Log Duplex Vector rule, here on the desk, and I use it for a few things for which I can't remember the equations but I do remember the motions. Every so much quicker than looking functions up in the HP48GX books. I mourn the final demise of the HP41CX. The case for the rule is long gone. 73, Fred K6DGW - Northern California Contest Club - CU in the 2014 Cal QSO Party 4-5 Oct 2014 - www.cqp.org On 8/14/2014 7:45 PM, Don Wilhelm wrote: I still have my 12 inch Post slide rule, but I no longer have it on my belt. I also have my 5 inch Post, but it is no longer in my shirt pocket. Those days are gone, but there "was a time" when they were required apparel if one was to succeed in engineering school and after. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
I still have my 12 inch Post slide rule, but I no longer have it on my belt. I also have my 5 inch Post, but it is no longer in my shirt pocket. Those days are gone, but there "was a time" when they were required apparel if one was to succeed in engineering school and after. 73, Don W3FPR On 8/14/2014 10:35 PM, Phil Wheeler wrote: "Had"? :-) Phil W7OX On 8/14/14, 5:55 PM, Robert Friess wrote: Of course, some of us had a 12 inch slide rule on the belt and a 5 inch in the shirt pocket. Bob On Thu, Aug 14, 2014 at 5:31 PM, Jim Lowman wrote: I assume that you're kidding about both. It would truly be a shame to take a fine piece of radio craftsmanship like the KX3 and look like a member of the "shack on the belt" club. Of course, I've been seen on campus years ago with either a slide rule or more than one calculator hanging from my belt. :-) 72/73 de Jim - AD6CW On 8/14/2014 7:20 AM, James kvochick wrote: Now that I've installed the 2 meter module in my KX3, are there plans in the works at Elecraft to provide a nice belt clip for my KX3, so I can carry the radio with the antenna held vertically? Oh yeah, and how about a KXPA100-2 amplifier? I'm just kidding. Cheers Jim K8JK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w3...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
"Had"? :-) Phil W7OX On 8/14/14, 5:55 PM, Robert Friess wrote: Of course, some of us had a 12 inch slide rule on the belt and a 5 inch in the shirt pocket. Bob On Thu, Aug 14, 2014 at 5:31 PM, Jim Lowman wrote: I assume that you're kidding about both. It would truly be a shame to take a fine piece of radio craftsmanship like the KX3 and look like a member of the "shack on the belt" club. Of course, I've been seen on campus years ago with either a slide rule or more than one calculator hanging from my belt. :-) 72/73 de Jim - AD6CW On 8/14/2014 7:20 AM, James kvochick wrote: Now that I've installed the 2 meter module in my KX3, are there plans in the works at Elecraft to provide a nice belt clip for my KX3, so I can carry the radio with the antenna held vertically? Oh yeah, and how about a KXPA100-2 amplifier? I'm just kidding. Cheers Jim K8JK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
Of course, some of us had a 12 inch slide rule on the belt and a 5 inch in the shirt pocket. Bob On Thu, Aug 14, 2014 at 5:31 PM, Jim Lowman wrote: > I assume that you're kidding about both. > > It would truly be a shame to take a fine piece of radio craftsmanship like > the KX3 and look like a member of the "shack on the belt" club. > > Of course, I've been seen on campus years ago with either a slide rule or > more than one calculator hanging from my belt. :-) > > 72/73 de Jim - AD6CW > > > On 8/14/2014 7:20 AM, James kvochick wrote: > >> Now that I've installed the 2 meter module in my KX3, are there plans in >> the works at Elecraft to provide a nice belt clip for my KX3, so I can >> carry the radio with the antenna held vertically? >> >> Oh yeah, and how about a KXPA100-2 amplifier? >> >> >> I'm just kidding. >> >> Cheers >> >> Jim K8JK >> >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rfri...@usa.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
I assume that you're kidding about both. It would truly be a shame to take a fine piece of radio craftsmanship like the KX3 and look like a member of the "shack on the belt" club. Of course, I've been seen on campus years ago with either a slide rule or more than one calculator hanging from my belt. :-) 72/73 de Jim - AD6CW On 8/14/2014 7:20 AM, James kvochick wrote: Now that I've installed the 2 meter module in my KX3, are there plans in the works at Elecraft to provide a nice belt clip for my KX3, so I can carry the radio with the antenna held vertically? Oh yeah, and how about a KXPA100-2 amplifier? I'm just kidding. Cheers Jim K8JK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
On 8/14/2014 7:20 AM, James kvochick wrote: Oh yeah, and how about a KXPA100-2 amplifier? Look for a used RF Concepts or Mirage (pre-MFJ) brick amp that produces 150W with 2W of drive. They are rare, but great amps. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
> Now that I've installed the 2 meter module in my KX3, are there plans in the > works at Elecraft to provide a nice belt clip for my KX3, so I can carry the > radio with the antenna held vertically? > > Oh yeah, and how about a KXPA100-2 amplifier? > > I'm just kidding Don't kid -- it is a good request and I will double down on it. Now, it does not need to be a KXPA100-2, I would be happy with something like a KXPA80-2 or some other reasonable power level boost. So, Elecraft, how about a 80 to 100 watt 2-meter brick-style amp that works with the KX3 with 2-meters and the K3 with 2-meters or with my 2 meter Yaesu HT. Yes, I know these can be bought elsewhere but there is something special about the "Made By Elecraft" label!! 73, phil, K7PEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?
Now that I've installed the 2 meter module in my KX3, are there plans in the works at Elecraft to provide a nice belt clip for my KX3, so I can carry the radio with the antenna held vertically? Oh yeah, and how about a KXPA100-2 amplifier? I'm just kidding. Cheers Jim K8JK Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
