Re: [Elecraft] K2 Speaker Replacement
James, Before replacing, it may be that you only knocked it off center of the voice coil. Take out the speaker and view it from all angles. Is the Cone off center? If the thing looks like it is, you might put three fingers and thumb equally around edge of voice coil at narrow end of cone, and push in gently and release. This might restore the centering. If not, you have not lost much time. There is also the possibility that you had such as strong signal that you magnetized part of the frame of the speaker. That is more tricky, but you might use a compass to see if symmetrical positions around the speaker frame circumference the compass needle deflects the same amount. You do this by putting speaker in a circle you have drawn on paper by tracing around the magnet. Now, carefully tie a string onto compass so that you may keep it a defined distance from the framework as you move it to differing positions. Keep string taut between frame and compass for each datapoint. You could record the amplitudes as so many degrees from North, 0 degrees. If you find a very unsymmetrical magnetic field plot, you might as well order a replacement speaker from Elecraft. You might be able to degauss the frame with a VCR tape hand held degausser of the Hockey Puck style that Hi Fi shops used to sell, but you do not want to degauss the permanent magnet at the back of the cone. GL, 73, Stuart K5KVH ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 Speaker Replacement
Makes sense to me! Ordering one today.. 73, James Kern KB2FCV -Original Message- From: kevin schuchmann [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 27, 2005 12:38 AM To: [EMAIL PROTECTED]; elecraft@mailman.qth.net Subject: Re: [Elecraft] K2 Speaker Replacement Hi James, I would order one from Elecraft, it is the one you `must have', it has an output spl of 95 db which is very good efficiency, if you were to replace it with anything else you have to match that number or better or the audio out will be at a lower level for the same volume setting. 73 Kevin WA6FWF - Original Message - From: <[EMAIL PROTECTED]> To: Sent: Tuesday, July 26, 2005 9:22 PM Subject: [Elecraft] K2 Speaker Replacement > Well I did it. By accident at field day I overloaded the K2's speaker > with too strong a signal and with the volume accidentally turned up > and I think I blew it out. It sounds like crap now.. yet plugging in > an external speaker sounds just fine. Should I contact Elecraft for a > replacement or is there some speaker that is a 'must have' to replace > the internal one? Thanks, > > James KB2FCV > > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 Speaker Replacement
Hi James, I would order one from Elecraft, it is the one you `must have', it has an output spl of 95 db which is very good efficiency, if you were to replace it with anything else you have to match that number or better or the audio out will be at a lower level for the same volume setting. 73 Kevin WA6FWF - Original Message - From: <[EMAIL PROTECTED]> To: Sent: Tuesday, July 26, 2005 9:22 PM Subject: [Elecraft] K2 Speaker Replacement Well I did it. By accident at field day I overloaded the K2's speaker with too strong a signal and with the volume accidentally turned up and I think I blew it out. It sounds like crap now.. yet plugging in an external speaker sounds just fine. Should I contact Elecraft for a replacement or is there some speaker that is a 'must have' to replace the internal one? Thanks, James KB2FCV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
