Re: [Emc-users] Python Component Loading
On Thu, 2008-01-24 at 07:20 -0600, John Thornton wrote: > Kirk, > > There is some info on this page that might help. > > http://axis.unpythonic.net/01154705314 > > What are you considering with the serial port? Just wondering... > > John Thanks for the link, John. It's part of my quest to develop a connection between EMC and my VFD through Modbus RTU. My notes so far are here: http://www.wallacecompany.com/machine_shop/EMC2/modbus/ -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Replying to Email
pmark wrote: > How to reply to email replies to your posted questions? Thank you! > > Pete Hit "reply"? Seriously, I don't understand the question. Do you have an email program that doesn't have "reply"? Regards, John Kasunich - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Replying to Email
How to reply to email replies to your posted questions? Thank you! Pete - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] optical probing
Hello Where i can find more info about digital probing or any mafacturers web site? thanks aram > Hi, > I'm certain that by now those of you that take "Digital Machinist" , > Winter 2007 have absorbed the article on > optical probing. The concept is a no-brainer but my stumbling block > is linux camera software with the cross-hair. > Does anyone know of a package that will work. I think one wants > stills at about the flicker rate but maybe it doesn't make a > difference. However, the ability to superimpose the cross-hair is > critical. > > This would be very nice as a pop-up window in emc but I'm willing to > use another machine if necessary. > > Ideas? > > Dave > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Installing Bootloader?
pmark wrote: > Need some advice for installing bootloader for BDI 4.51 EMC2? How long > should it take BDI to Install Bootloader? Progress window appears > (Installing Bootloader) after 10-15 minutes it comes on an stays on. > Nothing happens !! Stuck - Freezes Up. How much memory do you have on that computer? You need 256 MB to get it to work. If it is short on memory, it can slow to a crawl or freeze. Jon - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] optical probing
Hi, I'm certain that by now those of you that take "Digital Machinist" , Winter 2007 have absorbed the article on optical probing. The concept is a no-brainer but my stumbling block is linux camera software with the cross-hair. Does anyone know of a package that will work. I think one wants stills at about the flicker rate but maybe it doesn't make a difference. However, the ability to superimpose the cross-hair is critical. This would be very nice as a pop-up window in emc but I'm willing to use another machine if necessary. Ideas? Dave - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] M64/M65 and M6/M7 commands
I need to activate a patallel port output while the axes are moving. All commands above stop the movement before output is activated. Is there any G/M command that can switch outputs immediately or which other way to go. Thanks! Andreas atg Luther & Maelzer GmbH Sitz / Company Seat : 50668 Koeln / Germany Strasse / Street : Thedor-Heuss-Ring-23 Amtsgericht / Local Court : Koeln HRB 58893 USt.-Id. Nr. / VAT ID No. : DE 814 906 312 St.-Nr. / TIN No. : 80088 / 23872 Finanzamt / Revenue Office: Tauberbischofsheim - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Need some help - Stepper Mode 2 - HAL - WORKING!
John, Kirk, Thanks so much for the help. It was the ctrl_type = v,v,v that was the biggest problem. I am off and running now with phased motor drivers. Tonight, I can finish the wiring and then off we go. If anyone is interested in the .HAL and the .INI files, let me know. I didn't want to clutter up the list. As a note to the folks that are coding the stepconf utility. It would nice to have the option of setting phased mode vs step/dir for the step interface. When I get some time, I might take a crack at adding that myself. Thanks, Again. Jim C - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Python Component Loading
Kirk, There is some info on this page that might help. http://axis.unpythonic.net/01154705314 What are you considering with the serial port? Just wondering... John On 23 Jan 2008 at 13:57, [EMAIL PROTECTED] wrote: > I am interested in the serial port features available in Python. The > documentation shows how to make a Python component, and run it from > the halrun command, but not how to run it in EMC. Do you just use > "loadrt My_Python_component count=X" like the Comp components? > > The Python component is a script, so could I run shell scripts, or any > executable file, the same way? > > -- > Kirk Wallace (California, USA - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
