Re: [Flexradio] 2OSR Anyone???
I think that would probably require that components (rx1, rx2, tx) inside the 5000A box be separately addressable on the firewire bus, and that PowerSDR had the capabilty to target them separately. I don't think the software is there yet, but I might be wrong. And we won't have that second receiver anytime soon, I am guessing. Jerry W4UK At 11:12 PM 10/8/2007, you wrote: >Has anyone else pondered the feasibility of running one >session of PowerSDR on two separate computers with both being >connected to a single 5000A HW box?? > >I'm thinking that such concept could be useful in an >Unlimited Multi Op contest category. One operator would be >the "run" operator and the other operator being the S&P >operator. Each would have their own UI control and each could >have two RX's as in today's PowerSDR, and then with the next >generation PowerSDR software, maybe even 3-4 RX's per >operator. No doubt would take some practice to learn how to >team operate like that, but I would think it should be >doable. Yes? No? > >Duane >N9DG > > > > > >Need a vacation? Get great deals >to amazing places on Yahoo! Travel. >http://travel.yahoo.com/ > >___ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Knowledge Base: http://kb.flex-radio.com/ >FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 2OSR Anyone???
Once again, demonstrating the point that contesters are driving so many of the interesting SDR challenges... Duane - N9DG wrote: > Has anyone else pondered the feasibility of running one > session of PowerSDR on two separate computers with both being > connected to a single 5000A HW box?? Most of what you're describing is not a big reach at all. What's novel about this scenario is the need to arbitrate commands and data input from more than one operator at a time. On its face, that would seem to be much more of a "human protocol" issue than a technical one. However it does imply three important requirements: first, command message streams from each UI need to be stateful; second, the command protocol needs to include priorities; and third, commands may need some sort of time tagging and scheduling. Very interesting. Important stuff to bring into the picture. Fortunately, not something either the UIs or the DSP need to know anything about. For the rest, this configuration isn't much different from running multiple UIs on one machine, except the control/focus issue is more clearly defined for a single user with several UI instances. In that case, commands can still be treated as atomic rather than stateful, and can be executed as they arrive rather than needing scheduling. Much, much simpler. > I'm thinking that such concept could be useful in an > Unlimited Multi Op contest category... 73 Frank AB2KT ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] 2OSR Anyone???
Has anyone else pondered the feasibility of running one session of PowerSDR on two separate computers with both being connected to a single 5000A HW box?? I'm thinking that such concept could be useful in an Unlimited Multi Op contest category. One operator would be the "run" operator and the other operator being the S&P operator. Each would have their own UI control and each could have two RX's as in today's PowerSDR, and then with the next generation PowerSDR software, maybe even 3-4 RX's per operator. No doubt would take some practice to learn how to team operate like that, but I would think it should be doable. Yes? No? Duane N9DG Need a vacation? Get great deals to amazing places on Yahoo! Travel. http://travel.yahoo.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] No TX above SVN 1640 on the SDR 1000
I'm using 1649 and can transmit fine. Try rebuilding you .mdb from scratch and not import from an earlier svn. That seems to be the frequent instructions. good luck On 10/8/2007 9:38:55 PM, Gerald Capodieci ([EMAIL PROTECTED]) wrote: > I missed what to do with upgrades above 1640. I no longer can transmit. > Switching back to 1640 restores the transmitter. > -- next part -- > An HTML attachment was scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio. > biz/attachments/20071008/b72ba6ae/attachment.html > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] No TX above SVN 1640 on the SDR 1000
I missed what to do with upgrades above 1640. I no longer can transmit. Switching back to 1640 restores the transmitter. -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071008/b72ba6ae/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] First Blood for my FLEX-5000
After some suitable clowning around with the new rig, I cracked the Burundi DXpedition on 40 meters just now (still using the HF2V). An all time new one for me. The new amplifier hookup/setup helped even though I wasn't running a full KW or anything of the sort. More like 150 watts maybe. But, the new features are already counting for something. We'll see if I can win on 80 next. Larry Wo0Z ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] FLEX-5000A Manual
Hi Eric: No Check out the Table of Contents there is a page number at the end right side for each item. They are all wrong Check Microphone Connection is page 13 but that info in the book is on page 4. Ed WA3BZT - Original Message - From: Eric Wachsmann To: 'Edward J White' ; 'SDR-1000' Sent: Monday, October 08, 2007 2:23 PM Subject: RE: [Flexradio] FLEX-5000A Manual I suspect that what you are seeing is a difference between the PDF page number and the page number on the footer of each page. Please confirm whether this is the case. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Edward J White > Sent: Sunday, October 07, 2007 4:22 PM > To: SDR-1000 > Subject: [Flexradio] FLEX-5000A Manual > > Hi Gang > Have found a problem with the FLEX-5000A Manual Version 1.10.0 All the > pages in the table of Content are incorrect. > Ed > WA3BZT -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071008/3f4a4022/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Windows Vista CPU Meters Galore
I am running the PowerSDR with the Edirol sound card on Windows Vista. Everything is running very good. With all the cpu comments on the reflector , thought i would try something. I have 3 differant cpu indicators running , pretty cool - Hi Please click link for picture. http://www.flex-radio.com/Users.aspx?topic=powersdr1_pics 73's , Bruce KL7JDR Bruce W. Mills P.O. Box 1500 31490 Echo Lake Road Soldotna , Alaska 99669 (907)262-4373 [EMAIL PROTECTED] ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] FLEX-5000A Manual
At 11:23 AM 10/8/2007, Eric Wachsmann wrote: >I suspect that what you are seeing is a difference between the PDF page >number and the page number on the footer of each page. Please confirm >whether this is the case. One can make Acrobat generate the correct pagination to match the "on page" page number. For instance, if you have a document that starts with roman numeral preface pages x,ix,etc, you can make a pdf that shows those page numbers in the bar at the bottom, or on the right hand slider when you mouseover. I haven't done it recently, but I could look it up if you're interested. Jim, W6RMK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] FLEX-5000A Manual
I suspect that what you are seeing is a difference between the PDF page number and the page number on the footer of each page. Please confirm whether this is the case. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Edward J White > Sent: Sunday, October 07, 2007 4:22 PM > To: SDR-1000 > Subject: [Flexradio] FLEX-5000A Manual > > Hi Gang > Have found a problem with the FLEX-5000A Manual Version 1.10.0 All the > pages in the table of Content are incorrect. > Ed > WA3BZT ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Record/Playback Problems...
The wave file recorder is (unfortunately) unaware of the IF at any setting. This is why it comes up off center. The DSB signal makes me think that perhaps you are recording post processed audio (or 'just plain audio' as opposed to 'I/Q audio'). Take a look at the options menu form on the Wave record form to check your settings. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of n3evl > Sent: Saturday, October 06, 2007 7:09 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] Record/Playback Problems... > > Just thought I'd play with the record/playback options which I had > intended > to use during a sked later this evening (record off the air and > re-transmit). I'm seeing some weird behavior: > > The spectrum of the played-back signal as shown in the panadapter is way > to > the left of the shaded filter passband region of the screen. > > The spectrum for a LSB signal looks more like a DSB signal. I'm assuming > it > should look like the signal as displayed at the time of recording > > I'm wondering if the record/playback code is aware that the IF has changed > from 11.025 to 9 KHz? > > Setup: > > SDR-1K, PowerSDR v1.10.4 SVN:1644 > P4 2.4GHz, 1G RAM, WinXP Home SP2 > Atlas/Janus/Ozy via USB Control > Wave settings: RX Post; TX Pre; 192KHz Sampling Rate > > Pete, N3EVL > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Adjusting CW Sidetone for Skype
I'm not sure exactly how you have your audio routed, but between the regular volume controls (AF, RF, etc) and the VAC controls, I believe we should be able to find something that works. Note that there is a specific TX AF control on the Setup Form -> Transmit Tab. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Chris Brougham > Sent: Sunday, October 07, 2007 12:25 AM > To: flexradio@flex-radio.biz > Subject: [Flexradio] Adjusting CW Sidetone for Skype > > Hi, > > I can't seem to figure out how to adjust the CW sidetone volume when > using PowerSDR via Skype and a remote desktop connection. Reducing > either the gain via the TX AF monitor tab or the VAC TX tab doesn't seem > to have an effect. The only thing I can do is whip my head phones off > when I'm transmitting! > > Any ideas? > > -- > Chris VA7CAB > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Help with Digital Mode and Hamscope
DUH...you have to turn up the TX gain on the Digital Specific controls on the front control panel. I tested the unit again with a lower reading watt meter and found a small amount of RF going out. Then I boosted the TX gain control and "voila" have output. Band conditions are so bad at the moment, I can't get an "on air" test. Sorry about the bandwidth. Doug, VA3CR www.va3cr.net ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Help with Digital Mode and Hamscope
I cannot get my SDR-1000 to transmit on digital. It receives, the rig will key up, and a signal is showing on Hamscope, but there is no drive to the radio nor RF out. My setup is: Edirol, VAC, NV8Com, TRX Manager as logging program that Hamscope uses to key the rig. I have tried the same thing with MIXw and have exactly the same results. It's probably something very simple, but at the moment I can't see the problem. Frustrated in Canada Doug, VA3CR www.va3cr.net ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Heil connections to the FLEX-5000A
Tim: Yes, I realize that there isn't an actual sound card; I just mis-stated things as I described my problem. The problem was reported to me during my first on-air test of the Flex 5000, so I know the distortion was present in the transmitted audio rather than just being heard locally. I should also note that at the time, I didn't have a headset plugged in. Additionally , the distortion disappeared when I reduced the drive setting to zero. Since the noise was only present on two bands and was affected by the drive level, I assumed a problem with RF getting into the input, and began unplugging connecting cables that were not beaded, including the power speakers. When I keyed the radio with nothing connected to the Foster jack, the thumping was not present, and as I stated earlier, the Heil Proset also works without a problem. I've had my Heil Classic for several years, and it has been used successfully on my TS-2000; probably the best microphone I've ever used. The only change in the set up was the CC-1 Yaesu adapter. What I'm seeing on the panadapter is a periodic rapid rise and fall of approximately 20 db across the entire filter passband during transmit (but again, only on 10 and 15 meters). I haven't pulled apart my CC-1 adapter to see if it is wired the same as Ed's, but I'm wondering if the fact that the fact that one side of the PTT is wired to the audio ground rather than the DC ground may be causing a problem. Dirk W9QA -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071008/4947731b/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] FLEX-5000A Manual
Oops (wiping egg from face). Thanks for spotting - will correct. 73 de Joe - AB1DO - Original Message - From: "Edward J White" <[EMAIL PROTECTED]> To: "SDR-1000" Sent: Sunday, October 07, 2007 17:21 Subject: [Flexradio] FLEX-5000A Manual > Hi Gang > Have found a problem with the FLEX-5000A Manual Version 1.10.0 All the > pages in the table of Content are incorrect. > Ed > WA3BZT > -- next part -- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071007/4e0400d6/attachment.html > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/