Re: [Flexradio] Operators Manual
We hope so, however, Deep Impact has managed to cause mass anxiety and wiped out a significant number of programmer brain cells (I guess the East Coast is safe) :) Bob K5KDN -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alfred Green Sent: Thursday, August 13, 2009 9:46 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Operators Manual Tim Ellison wrote: upcoming new software architecture code named Deep Impact. Oh. Dear. As in an event that caused mass panic and wiped out a significant portion of the East coast? Can the new architecture really be that good? 73 Alf NU8I Scottsdale AZ DM43an ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to btr...@anvilcom.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] PTT via CAT Port Problem
I am using N1MM Logger with PowerSDR and have bumped up against a problem (maybe) in the way PowerSDR handles PTT via the serial port used for CAT. I am NOT talking about PTT via CAT command, but rather PTT via the RTS or DTR lines. I have the following serial port pairs set up in com0com: COM7==Com17 COM8==COM18 PowerSDR is set up as follows: Setup|CAT Control|CAT Control Enable CAT is checked Port is set to COM18 Baud/Parity/Data/Stop settings are irrelevant. Setup|CAT Control|PTT Control Enable PTT is checked Port is set to COM17 RTS is checked DTR is not checked DSP|Keyer|Connections Primary is set to Radio Secondary is set to CAT PTT Line is set to RTS Key Line is set to DTR N1MM is set to use the RTS line on COM8 for PTT and to use the DTR line for sending CW. If I am in CW mode, N1MM Logger keys the radio sends CW properly. However, if I am running RTTY or PSK31, N1MM does not key the radio. I am virtually certain that N1MM is toggling the RTS line on COM8, but have no real way of proving it. N1MM allows you to set up a second serial port just for PTT/CW control. If I set the 2nd port to COM7 tell N1MM to use RTS for PTT control and to use DTR for CW keying, then N1MM keys the radio fine in RTTY PSK31. My question is: Do the DSP|Keyer|Connections settings apply only if you are in CW mode? The FLEX-5000 manual states, This is useful as some programs allow both CAT commands and COM port line keying for CW. This says that they will work for CW, but does not say whether they apply to other modes. I wrote a simple utility that allows me to open COM8 and toggle the RTS DTR lines. If PowerSDR is in CWL or CWU modes, then toggling DTR keys the transmitter. If PowerSDR is in any other mode, then toggling RTS and/or DTR has no effect. Is PowerSDR working as designed, or is it a bug? If a bug, I will enter a Bug Report. If not, I will enter a Feature Request. 73, Ray, K9DUR http://k9dur.info ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Equalizer
The Flex 5000A manual states that the balanced microphone input on the back of the rig does not have a 20dB preamp as it does for the front input. Does the rear input bypass the PowerSDR equalizer as well? Has anyone found it necessary to use an external mic preamp when using a PR781 on the balanced input? Thanks. Everett KE5MMT -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Equalizer
Everett, If you have the internal equalizer turned on in the Transmit profile, moving from the front mic to the rear will only cause a slight loss in gain (overcome this by raising the Mic Gain) so you should see much the same audio performance, just slight gain change moving from the front to the rear mic connector. 73, Dudley WA5QPZ Everett B. Simonds wrote: The Flex 5000A manual states that the balanced microphone input on the back of the rig does not have a 20dB preamp as it does for the front input. Does the rear input bypass the PowerSDR equalizer as well? Has anyone found it necessary to use an external mic preamp when using a PR781 on the balanced input? Thanks. Everett KE5MMT ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] 3K Audio
At this time I am only using a set of Heil Pro headphones/mic and I have noticed the audio really doesn't sound all that good in the headphones though using the same set on the 5000 they sound ok. Any thoughts or suggestions? Eventually I will get around to adding a speakers but I am still concerned about the audio coming out of the headphones. I probably need to get some speakers on the 3000 to see if there is an issue with the speakers. Don - kx9q ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Palstar AT-TUNE
I am looking at acquiring the Palstar auto tuner and was wonder how to connect to the flex radio. There is a kb article that references ddutil and the Palstar auto tuner. If I understand this correctly does this mean I would need a serial port on the pc to support the auto tuner and since there are no serial ports on my computer I would need a usb to serial adaptor to interface to the tuner? Don - kx9q ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Equalizer
The TX EQ is performed in software and is enabled for all phone modes. It is by passed for CW and DIGx modes. The mic preamp on the front panel is a hardware preamp. I have a PR-40. I can drive the rig to full output with it using no preamp and the balanced line in on the back of the FLEX-5000. I choose not to do this and use a mic preamp to provide additional headroom gain for the balanced line input. So no it is not necessary. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Everett B. Simonds Sent: Friday, August 14, 2009 12:57 PM To: flexradio@flex-radio.biz Subject: [SPAM] [Flexradio] Equalizer The Flex 5000A manual states that the balanced microphone input on the back of the rig does not have a 20dB preamp as it does for the front input. Does the rear input bypass the PowerSDR equalizer as well? Has anyone found it necessary to use an external mic preamp when using a PR781 on the balanced input? Thanks. Everett KE5MMT -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] 3K Audio
Are you using the same database for both radios? -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Don Sachnoff Sent: Friday, August 14, 2009 2:38 PM To: flexradio@flex-radio.biz Subject: [Flexradio] 3K Audio At this time I am only using a set of Heil Pro headphones/mic and I have noticed the audio really doesn't sound all that good in the headphones though using the same set on the 5000 they sound ok. Any thoughts or suggestions? Eventually I will get around to adding a speakers but I am still concerned about the audio coming out of the headphones. I probably need to get some speakers on the 3000 to see if there is an issue with the speakers. Don - kx9q ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Palstar AT-TUNE
Don, Yes, you'll need a USB/Serial adapter to connect the Palstar to the computer. Set the Palstar to Kenwood mode. Use DDUtil and select the USB Com port as a passive listener in DDUtil. Works perfectly EVERY TIME. 73, Mack de WB4MAK www.nfarl.org www.sedxc.org -- From: Don Sachnoff d...@kx9q.net Sent: Friday, August 14, 2009 14:48 To: flexradio@flex-radio.biz Subject: [Flexradio] Palstar AT-TUNE I am looking at acquiring the Palstar auto tuner and was wonder how to connect to the flex radio. There is a kb article that references ddutil and the Palstar auto tuner. If I understand this correctly does this mean I would need a serial port on the pc to support the auto tuner and since there are no serial ports on my computer I would need a usb to serial adaptor to interface to the tuner? Don - kx9q ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to mccormick_m...@hotmail.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Operators Manual
Although the F3K manual does cover most of PowerSDR as appropriate for the F5K, I'm afraid there are differences, some more significant than others. For example, there is no antenna form for the F3K and the mixer forms are different. Also the F3K has no second receiver, cannot sample at 192kb/s, etc., etc. Whether or not the manuals can or cannot be split in hardware/software will depend much on how the new architecture pans out. Right now there is a very strong relationship between much of PowerSDR and the hardware it is running. The trade-off will depend on maintaining a high degree of readibility and accessibility versus splitting the manuals software/hardware. 73 de Joe - AB1DO - Original Message - From: Tim Ellison telli...@itsco.com To: Ray Andrews, K9DUR k9...@rnacs.com; 'manualman' manual...@juno.com Cc: FlexRadio@flex-radio.biz Sent: Thursday, August 13, 2009 20:36 Subject: Re: [Flexradio] Operators Manual While we are on the subject of manual confusion (as opposed to automatic confusion), there is a little something that might not be very intuitive to new users (and some of us OTs too). Even though the FLEX-3000 Owner's Manual indicates it is for the FLEX-3000, it actually contains the most up to date information regarding PowerSDR since it is based on v1.18.0 of PowerSDR as opposed to v1.14.0 of PowerSDR that the FLEX-5000 Owner's Manual is based on. So those who have the FLEX-5000 (or SDR-1000 for that matter), if you want to reference the most up to date information regarding PowerSDR it is best to use the current FLEX-3000 Owner's manual. Makes sense, doesn't it? :-) I hope that there will be separate documentation for the software and hardware parts of the SDR system with the upcoming new software architecture code named Deep Impact. -Tim ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Equalizer
I was just wondering what pr781 users had their mic gain set at, mine needs to be about 28 even when I speak loudly into it at about 4 inches, this is using the front input, When i load the default pr781 profile the mic gain is set to 10,, Have I a problem with the front input preamp? cheers Paul GI4FZD ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Special Computer - New Idea: Benchmark
Benchmark idea presented at the bottom between stars (* *) Lots of counterfeit capacitors out there. Some [mostly] Chinese companies stole the formula for the electrolyte and started making their own capacitors; of course they did it wrong (process, etc) and produced these capacitors that have been plaguing a surprising percentage of products on the market today. The engineers who design products don't usually specify the brand; that is left up to the company or division that is responsible for actually mass producing the parts. To cut costs and maximize profits, the cheapest parts that meet the spec. are selected. These bad caps are often fine at first, but after a few months or years of service, or so many hours of use, they electrolyte breaks down and the tops bulge, the plates are distorted, and the specification of the capacitor changes, often greatly. What's unfortunate, is that different production runs or batches of the same hardware part can end up with different brands of capacitors. So even in Neil's computer, the motherboard, or power supply or any of the components, could have bad capacitors, if they are not inspected before put into service. My friends and I have pulled from our university's trash, tons of motherboards and power supplies and other equipment, measured the physical sizes of all of the capacitors, and ordered replacements, a few hours with a soldering station and we have working equipment again. All for a few dollars spent at mouser or digikey. Here is a list of some brands known to produce problematic capacitors. http://www.badcaps.net/forum/showthread.php?t=388 If you are buying caps from mouser, digikey etc you will probably never encounter these brands. I think this whole 'special computer' thing is a bit overblown. Some good points have been raised though. The type of computer needed for SDR is not that of your typical consumer PC. Best performance will not be achieved on a machine with a million bells and whistles on the mother board, (turning these off in the bios may help in some situations) A workstation type of computer is probably more appropriate. What about laptops? The Flex-3000 is advertised to be a companion to a laptop computer. There are a lot less options for laptops. If the Flex will not work properly on the average modern (Dell, Gateway, whatever) computer, then this is a problem that should be smoothed out by the Flex/PowerSDR developers. I believe it is the goals and intentions of Flex to produce a product that is compatible the majority of computers out there. For those willing and able to spend extra, and get a Flex-C, or a custom computer (build by themselves or some company willing to work with them) then they can have a system that works a bit better than the off the shelf alternatives that are more practical for many users. * What I think PowerSDR/Flex needs is a benchmark utility that measures the parameters and performance of the sub-systems that matter. Things like latency etc. come to mind. This way, Neil can build a computer, he has a way of advertising the performance. Or I could build my own computer, and see how well it works, do some tweaking, and see if I have changed things for the better. I also could check to see if new drivers are affecting the system. Or someone could buy a Dell, and do the same. Using a benchmarking utility we have a way to compare and share with each other what works. This way we can make educated recommendations to help everyone settle on an appropriate system that fits their needs, their budgets, and their shack. * -Greg, N2GZ --- Bad caps caused problems across a range of products. http://www.badcaps.net/ Mel, k0pfx --- Thanks Don, 1st I've heard of it. Will keep an eye out for that problem. Another good reason to try Neal's pre-configured approach Brian --- Don wrote: Be careful with the 8400 as this was one of a number of PCs from Dell that experienced the capacitor failure - where the top of the cap pushed up and was no longer flat. apparently they were using a bad batch of caps on their motherboards. I had two of the 8400s and I just recently trashed them both as the motherboards failed. Up to about 1.5 years ago Dell was providing replacement motherboards regardless of whether the pc was in warranty or not. They have since discontinued that service. Don - kx9q ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] special computer
Hi Greg! Good point! I think this whole 'special computer' thing is a bit overblown. I have a quad Dell that works flawlessly with the Flex running 192 kHz in normal mode with no freeze ups, max latency 610 ms and CPU usage between 5-12%. Flex provides recommendations for the computer you choose, and if they are followed, everything should be just fine. The computer is an integral part of a SDR station, and unlike a power supply, it isn't something you decide to use just because it's been hanging around the shack or because you picked it up at a hamfest flee market for a song. My fear is that the custom computer idea will give those who want to trash SDR more reasons to scare away hams that don't feel they are computer experts. Trust me, you don't have to be one. Jim AB2CD ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] [SPAM] Re: Equalizer
Have I a problem with the front input preamp? No. The default TX profiles are just templates to get you started with a base profile from which you configure for yourself, not the definitive profile for a mic. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Paul20 Sent: Friday, August 14, 2009 3:46 PM To: flexradio@flex-radio.biz Subject: [SPAM] Re: [Flexradio] Equalizer I was just wondering what pr781 users had their mic gain set at, mine needs to be about 28 even when I speak loudly into it at about 4 inches, this is using the front input, When i load the default pr781 profile the mic gain is set to 10,, Have I a problem with the front input preamp? cheers Paul GI4FZD ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] [SPAM] special computer
Folks, these are NOT custom computers. They are optimized for SDR, just like any computer you would use for a SDR will require optimization because Windows isn't configured for real-time operation right out of the box. Some people who are not that computer savvy and want a turn key system that they do not have to optimize themselves. This is their option to get a ready to work out of the box solution. People who are narrow minded and what to trash what they do not understand will use any excuse they can come up with, this one not withstanding. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of AB2CD Sent: Friday, August 14, 2009 5:02 PM To: FlexRadio@flex-radio.biz Subject: [SPAM] [Flexradio] special computer Hi Greg! Good point! I think this whole 'special computer' thing is a bit overblown. I have a quad Dell that works flawlessly with the Flex running 192 kHz in normal mode with no freeze ups, max latency 610 ms and CPU usage between 5-12%. Flex provides recommendations for the computer you choose, and if they are followed, everything should be just fine. The computer is an integral part of a SDR station, and unlike a power supply, it isn't something you decide to use just because it's been hanging around the shack or because you picked it up at a hamfest flee market for a song. My fear is that the custom computer idea will give those who want to trash SDR more reasons to scare away hams that don't feel they are computer experts. Trust me, you don't have to be one. Jim AB2CD ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Flex 5KA with Expert 1K-FA linear
Hi group: Just ordered the Expert 1K-FA linear and its on its way. Anybody that has the same setup that can share information on how to setup the CAT interface? 73´s Mario/YS1MAE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Question about F3K manual
Page 47, I am trying to understand when the VFO B TX buton is yellow, what does that mean? Here's the explanation, which does not make any sense to me: QUOTE The operation of VFO B is similar to that of VFO A. However, VFO B is used only in specific instances. However, VFO B is used only in specific instances. When operating split (SPLT button under VFO), VFO B displays in red the transmit frequency (and TX indicator is red) When activating the multi receive function (MultiRX button under MultiRX), VFO B displays in yellow the second receive channel's frequency. Otherwise, it can be viewed as a storage container to copy VFO data to (see the VFO Controls section on page 55). END QUOTE With MultiRX, the VFO B either IS or IS NOT the transmitting VFO. TX on VFO B is either gray (VFO A is transmit) or red (VFO B is transmit). I sometimes DO see TX as yellow, but I don't know how to make it occur and I don't understand what it means. Appreciate any clarification on this. Thanks. Mark Lunday WD4ELG Hillsborough, NC - FM06kb mailto:wd4...@arrl.net wd4...@arrl.net http://wd4elg.net http://wd4elg.net http://wd4elg.net http://wd4elg.blogspot.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
