On Fri, 10 Jan 2003, Noah Garrett Wallach wrote:
>
>
> Hi,
>
>
> okay I just built a 4.7-STABLE kernel. but I am not able to boot when
> using the GENERIC config file. I am kinda new at troubleshooting this
> type of stuff so a clue is welcome.
>
> after installation and reboot
>
> I only get so far - to the following line:
>
> amr0: mem 0xf000-0xf7ff irq 3 at device 0.0 on pci4
okay I removed the MegaRAID support from the kernel configuration file and
rebuilt the kernel. things work fine now. but I am wondering why there
is still a hang on kernel boot for when the RAID card is defined.
commented:
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
#device dpt # DPT Smartcache - See LINT for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device ciss# Compaq SmartRAID 5* series
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp# SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
>
> the next line should be (from the 4.6-STABLE old kernel)
>
> amr0: Firmware 1.72, BIOS 3.27, 128MB RAM
>
>
> what is creating this issue? I think this MegaRAID card is supported - so
> I am not sure why loading stalls here.
>
> - noah
>
>
>
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message