Re: ASUS A7M266-D: enabling 'on board sound'
On Tue, 23 Apr 2002, John Utz wrote: > huh, bet this might be an smp problem > > works like a champ on my ASUS board. > > > On Tue, 23 Apr 2002, Marc G. Fournier wrote: > > > > > Morning all ... > > > > Just recently picked up an ASUS A7M266-D Motherboard with Dual: > > "(AMD Athlon(TM) MP Processor (1200.05-MHz 686-class CPU)" ... the system > > purrs like the proverbial kitten ... but the one thing that is eluding me > > so far is getting the onboard sound to work ... > > > > I think I've gone through just about everything ... I enabled > > PNPBIOS in my kernel, made sure the sound device was enabled in the BIOS > > ... nadda ... > > > > The error I'm seeing in dmesg is: > > > > pcm0: at device 4.0 on pci2 > > pcm0: cmi_attach: Cannot allocate bus resource > > device_probe_and_attach: pcm0 attach returned 6 > > this could be one of two things: > > 1. your version of the CMI8738 might have a new pnp number, but i sorta > doubt it because then you wouldnt get the 'CMedia CMI8738' string. that is kinda what I'm figuring too ... > 2. All Your Interrupts Are Belong To Somebody Else! > > the extra bits of tomfoolery involved in getting a second cpu to live in > an architecture than never imagined more than one (daisy chained 8259a's, > still?) may have consumed the available interrupts. Actually, I thought about this, and one problem with this theory ... right now, I have both serial ports and the parallel port disabled, which should free up 3/4 and 5 (or is it 7?) ... if I re-enable them, they come up fine with their respective IRQs ;( > 3. Other, more reasonable, but more subtle problems that i cant imagine > :-) > > > I'd suggest the ol' boot -v and see what you get for a dmesg. Will try this one tomorrow at the office ... > > > > I've tried manually setting in the kernel: > > > > > strings /kernel | grep pcm0 > > pcm0_resources > > ___device pcm0 at isa? irq 5 drq 1 flags 0x0 > > > > but that hasn't made any difference ... > > > > Anyone have any experience with this board, or this chipset, that > > might be able to suggest a course of action here? > > > > thanks ... > > > > > > > > > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > > with "unsubscribe freebsd-multimedia" in the body of the message > > > > -- > > John L. Utz III > [EMAIL PROTECTED] > > Idiocy is the Impulse Function in the Convolution of Life > > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
Re: ASUS A7M266-D: enabling 'on board sound'
- Original Message - From: "Randall Hopper" <[EMAIL PROTECTED]> To: "Marc G. Fournier" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, April 28, 2002 9:17 AM Subject: Re: ASUS A7M266-D: enabling 'on board sound' > Marc G. Fournier: > | Just recently picked up an ASUS A7M266-D Motherboard with Dual: > |"(AMD Athlon(TM) MP Processor (1200.05-MHz 686-class CPU)" ... the system > |purrs like the proverbial kitten ... but the one thing that is eluding me > |so far is getting the onboard sound to work ... > ... > |pcm0: at device 4.0 on pci2 > |pcm0: cmi_attach: Cannot allocate bus resource > |device_probe_and_attach: pcm0 attach returned 6 > ... > |___device pcm0 at isa? irq 5 drq 1 flags 0x0 > > I have the original non-dual version (ASUS A7M266) with the same sound > chip: > >> dmesg | grep pcm0 >pcm0: port 0xa400-0xa4ff irq 10 at device 5.0 on pci0 > > Here's what I have on my 4.3-STABLE (circa 06/01) config: > >device pcm0 >device sbc0at isa? port 0x220 irq 5 drq 1 flags 0x15 > > The flags may be the kicker for you. That sets the 2nd (16-bit) DMA > channel IIRC. > If you have the time I would be very interested in having more information about your configuration as I am contemplating building a similar SMP system. How much memory do you have installed and what use do you have for the system? Any information much appreciated. David To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
ASUS A7M266-D: enabling 'on board sound'
Morning all ... Just recently picked up an ASUS A7M266-D Motherboard with Dual: "(AMD Athlon(TM) MP Processor (1200.05-MHz 686-class CPU)" ... the system purrs like the proverbial kitten ... but the one thing that is eluding me so far is getting the onboard sound to work ... I think I've gone through just about everything ... I enabled PNPBIOS in my kernel, made sure the sound device was enabled in the BIOS ... nadda ... The error I'm seeing in dmesg is: pcm0: at device 4.0 on pci2 pcm0: cmi_attach: Cannot allocate bus resource device_probe_and_attach: pcm0 attach returned 6 I've tried manually setting in the kernel: > strings /kernel | grep pcm0 pcm0_resources ___device pcm0 at isa? irq 5 drq 1 flags 0x0 but that hasn't made any difference ... Anyone have any experience with this board, or this chipset, that might be able to suggest a course of action here? thanks ... To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message