Re: [Freevo-users] Freevo using alsa
Hi Duncan, Duncan Webb wrote: > Benedikt Bär wrote: >> Hi Duncan, >> >> I just solved this by changing the alsamixer2 code. It's not very >> generic, but it works for my setup. >> >> Basically, what I did was changing the volume change function to iterate >> through the controls list, and applying the volume. > > It may be a general solution. > >> Maybe in future releases it is possible to have some more configurations >> in alsamixer, to satisfy such set-ups. >> >> Also, an option to mute the channel by turning the volume 0 would be >> nice, as the "PCM" control on my card doesn't have a mute switch. > > Freevo normally sets the volumne to zero, may be the alsamixer2 plug-in > does not conform as it should. Hmm... I wasn't aware of this. ALSAMIXER2 doesn't set the volume to 0, it flips the mute switch. If this is against Freevo standards, I'll change it. ...juerg >> I've also solved the problem with the idlebar volume plug-in, by >> changing the plugin.getbyname argument to "ALSAMIXER2" instead of >> "MIXER". Maybe the volume plug-in will be able to automatically detect >> this in the future. > > Should be the default: > > Index: src/plugins/alsamixer2.py > === > --- src/plugins/alsamixer2.py (revision 10460) > +++ src/plugins/alsamixer2.py (working copy) > @@ -105,7 +105,7 @@ > Initialise the Alsa Mixer 2 plug-in > """ > plugin.DaemonPlugin.__init__(self) > -self.plugin_name = 'ALSAMIXER2' > +self.plugin_name = 'MIXER' > > # > # Set the main and mute mixer control names > > > You can raise a bug report for this problem it you like. > > Good to hear that it now works correctly. > > Duncan > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Freevo using alsa
Hi Benedikt,
Benedikt Bär wrote:
> Hi again Andreas,
>
> I installed Freevo 1.7.8.1, and I'm using now the alsamixer2 plug-in. So
> far everything seems to work, except two things:
>
> 1) The idlebar.volume plug-in does not work with alsamixer2. Is there
> any workaround?
>
> 2) I have a separate input for my TV card, which loops into the 'Line'
> channel. I would like that alsamixer2 keeps PCM & Line at the same
> levels. Is this possible? Here's my current config:
No, ALSAMIXER2 can't do this.
> ALSAMIXER2_MAIN_CTRL = 'PCM'
> # ALSAMIXER2_MUTE_CTRL = 'Headphone'
> ALSAMIXER2_CTRLS = [
> # (ctrl, card, default vol, min vol, max vol)
> ('PCM','hw:SB',90,0,100),
> ('Line', 'hw:SB', 90, 0, 100),
> ]
>
> When I remove the PCM line, alsamixer2 controls the Line volume, but not
> the PCM anymore :(.
This behaviour is intentional. ALSAMIXER2 only control the volume of the
ALSAMIXER2_MAIN_CTRL. If the MAIN_CTRL is not set, it use the first
control in the CTRLS list.
I was working on an update to the plugin that would be able to handle
your setup. I haven't had the time yet to clean it up and submit it.
I'll try to do so in the short future.
...juerg
> -
> Benedikt
>
> This message is digitally signed by a PGP
> key, to verify it's authenticity.
>
> If you received this message without key
> the message may not be authentic.
>
> www.relamp.tk
>
>
> On Sun, 2008-03-09 at 14:14 +0100, Andreas Dick wrote:
>> Am Samstag, 8. März 2008 23:55 schrieb Benedikt Bär:
>>> Hi Andreas,
>>>
>>> I do have the all the 6 channel for the volume control. In addition, I
>>> also have the PCM control, which controls all 6 channels (like a general
>>> volume), so the sound card itself works fine in 6ch mode (I tested it
>>> with a DVD).
>> well.
>>
>>> However, the alsamixer plug-in does not control either of the 6
>>> channels, nor the PCM volume.
>>>
>>> I'm interested in trying alsamixer2, but I can't find this plug-in when
>>> listing them in freevo.
>>>
>>> How can I get it?
>> I use freevo 1.7.6.1, and maybe it was added after 1.7.3 you are using.
>> since you use 1.7.3 I suppose you installed it with your packet manager
>> (apt?)
>> normaly it is very easy to install a new version from sources over the old
>> installed version (at your own risk!):
>> - download it from
>> http://sourceforge.net/project/showfiles.php?group_id=46652
>> - # tar -xzf freevo-1.7.6.1.tar.gz
>> - # cd freevo-1.7.6.1/
>> - # python setup.py install
>> - maybe you have to change something in your local_conf.py (?)
>> (the risk could be, that your packetmanager do not know about the new
>> version,
>> and it is maybe not able to remove it properly if needed...)
>>
>> Andreas
>>
>>
>>
>> -
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
>>
>>
>>
>> ___
>> Freevo-users mailing list
>> Freevo-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/freevo-users
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] For the site: What hardware (tv/graphics/sound) card do you use?
> Hi all, > > I want to update the recommended hardware section for the new site. Can > you reply here with the make and model of your; > > * TV card - analogue, dvb-t/s/c, atsc Hauppauge WinTV PVR-150MCE > * Sound card - with output used onboard nVidia MCP51 (detected as a Realtek ALC861) > * Graphics card - with output used onboard nVidia GeForce 6150 > * Motherboard Asus A8N8L > * Case Asus Pundit P1-AH1 barebone. - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] [ANNOUNCE] Freevo-1.7.3 Release
> Hello all, > > Today, Swiss National Day, freevo-1.7.3 has been released and as usual > there are a lot of additions, changes and fixes in this release. Nice one. It better live up to swiss quality standards then :-) Great work by the way, love it! Hopp Schwiiz ...juerg > First, a big thank you to you for using Freevo! A good choice, if I > may say so, :-) and without your support there would be no Freevo. > > A special thanks to all that have contributed since the release of > 1.7.2 by sending in translations, patches for new features and bug > fixes, testing, reporting problems, updating the wiki pages and for > helping others with problems on the lists. All of this helps keep > Freevo alive and well. > > A particular thank to: > Adam Charrett for his great recordings manager a button bar plug-ins > Wout Clymans for his audio scrobbler plug-in > Pierre Ossman for updating the Apple trailers plug-in > Ringj Cn for the new Chinese translation > Lefteris F. Sarakinos for the new Greek translation > Pascal Schirrmann for the French translation updates > Gorka Olaizola for the Spanish translation updates > Valera Koval for the work on mplayer field dominance and interlacing > and there are many more names see the change log for a full list and, > if I've forgotten you, your efforts are greatly appreciated. > > As well as those items listed above there are other changes that are > worthy mentioning, you can now link you personal web pages to the > Freevo web pages, you can start freevo in the full-screen mode and > pass settings to the x-server and you can have pops and clicks as you > move about the menu. The logging is now done with the Python logger > which gives accurate timestamps. The child process are now run with > Python's subprocess module. > > If you haven't contributed anything, no problem, using Freevo is what > it is all about. Please do feel free to help out by adding and > updating wiki pages, the wiki is very important for exchanging > information. There are also translations to be written and maintained. > And if you have a bit of programming inclination your very welcome to > provide patches and fixes, I don't bite... much :) > > The complete change log is here: > http://freevo.sourceforge.net/cgi-bin/doc/ChangeLog > > The release is now ready for downloading from the SourceForge page: > http://sourceforge.net/project/showfiles.php?group_id=46652 > Fianlly a big thanks to SourceForge for their services. > > TTFN > Duncan > > http://en.wikipedia.org/wiki/TTFN > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.5 (MingW32) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFGsG92Ni6l+Xvys44RAsMAAJ0Ubcwyp5FyOrJ0YvPrgveDmXoKRwCfdygH > 6QDj/YtMFqBnY6UruHLsiiw= > =u1ew > -END PGP SIGNATURE- > > > > - > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > ___ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] HOWTO: Sensors on via EPIA systems and idlebar plugin
On 6/7/07, Stephen Rowles <[EMAIL PROTECTED]> wrote: > Juerg Haefliger wrote: > >> It also seems that the via driver returns data at a different scale for > >> the CPU than the other data - sigh, so as described in the wiki link > >> above, you will need to scale the original temp up by a factor of 10 > >> before then scaling. > >> > > > > I'm the author of said driver. No need to sigh, that behavior is by > > design for good reasons :-) The driver returns what the chip reads at > > its inputs. For temp1, this value depends on the implementation of the > > board (value of external scaling resistors). The driver can't possibly > > know what does values are so scaling is left to the user. Temp2 is > > different since it's the chips internal temperature which is always > > identical for all boards and thus the driver does the correct scaling. > > > > Check out Documentation/hwmon/vt1211 in the kernel source tree for a > > detailed description of the driver. > > > > ...juerg > My sigh wasn't about the driver, more the slightly strange behaviour > difference between the sensors config and the config needed in freevo. I > understand that scaling has to be done outside the driver :) > > In /etc/sensors.conf there is the following for temp1: > > compute temp1 (@ - 73.869) / 0.9528, (@ * 0.9528) + 73.869 > > For most sensors using freevo idlebar plugin all you do is copy and past > the section "(@ - 73.869) / 0.9528" and let it do its stuff. However for > some reason to get this to work correctly you need to add the extra *10, > as I documented: > > ((@ * 10) - 73.869) / 0.9528') > > Just seems a bit weird and inconsistent, I don't know whats going on > here and why sensors.conf doesn't need the *10 scale but freevo does. Err, no, don't blame this on the driver, the driver works just fine. The raw value reported via the sysfs interface is in 'millivolts' and needs to be adjusted according to the formula in sensors.conf: jabba:~# echo "(`cat /sys/devices/platform/vt1211.24576/temp1_input` / 1000 - 73.869) / 0.9528" | bc 41 The idlebar plugin must be doing something funny. > And thanks for the driver! Finally with 2.6.21 I have sensors that work, > I've been worrying about my board as I've squeezed it into a small case, > now I can rest easy that the temps are in range :D Assuming you trust the values? :-) Out of curiosity, what VIA board do you have? Can you control fan speeds on your board? ...juerg > - > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > ___ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] HOWTO: Sensors on via EPIA systems and idlebar plugin
Hi Stephen,
On 6/7/07, Stephen Rowles <[EMAIL PROTECTED]> wrote:
> Using 2.6.21 I can finally get reliable data from my via EPIA system
> about temperature - yay!
>
> I've updated the Sensors section of the idlebar wiki:
>
> http://freevo.sourceforge.net/cgi-bin/doc/IdlebarPlugins
>
> to include a mini howto with the plugin line you need. Anyone wanting
> this to work will need this bug fixed in their freevo distribution:
>
> http://sourceforge.net/tracker/index.php?func=detail&aid=1731892&group_id=46652&atid=446895
>
> (thanks Duncan!)
>
> It also seems that the via driver returns data at a different scale for
> the CPU than the other data - sigh, so as described in the wiki link
> above, you will need to scale the original temp up by a factor of 10
> before then scaling.
I'm the author of said driver. No need to sigh, that behavior is by
design for good reasons :-) The driver returns what the chip reads at
its inputs. For temp1, this value depends on the implementation of the
board (value of external scaling resistors). The driver can't possibly
know what does values are so scaling is left to the user. Temp2 is
different since it's the chips internal temperature which is always
identical for all boards and thus the driver does the correct scaling.
Check out Documentation/hwmon/vt1211 in the kernel source tree for a
detailed description of the driver.
...juerg
> e.g.
>
> plugin.activate('idlebar.system.sensors', level=30, args=(('temp1','((@ * 10)
> - 73.869) / 0.9528'), 'temp2', None))
>
>
> Posting here to ensure people find out about it :)
>
>
> Cheers all, loving freevo :D
>
> -
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> ___
> Freevo-users mailing list
> Freevo-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Perfect motherboard for Freevo (was Re: Freevo box over Compact Flash.)
> 1) from a review: To be in the vicinity of the ASUS Pundit P1-AH1 when it's > working under high loads is not a pleasant experience, and it's not > something that you wish to do for a long time. > (http://www.nordichardware.com/Reviews/?page=1&skrivelse=486) It's actually not too bad and there's always ways to slow the fan down. I'm currently twiddling with the BIOS settings to try to make the fan slower. And I'm trying to get info from ASUS to add support for hwmon... > 2) where to I put my LCD display? External via USB? > I think the HD will be far enough from the capture card but this needs to > be tested (found that those ultra compact mini-itx cases that put the HD > practically on top of the PCI extension space give too much interference) The only issue I've run into so far is with the PCI slots. My PVR-150MCE didn't fit, it was too tall. I had to shave 2mm off to make it fit :-) ... juerg > Paul > > Juerg Haefliger wrote: > Check out the ASUS Pundit P1-AH1 and PH1 barebones. They come with > lots of ports on the back :-) > > ...juerg > > > On 11/20/06, John Molohan <[EMAIL PROTECTED]> wrote: > > > > > > > The truth is, after 2 years of working with them in large-scale > commercial deployments, I'm frankly sick of the things. I've long since > gotten over the "Ooh! Tiny!" aspect and come to realize that things that > sit in my AV rack should be roughly AV component shaped, and i can do > that with a full size ATX motherboard. > > > Agreed. My AV-type case is also largely empty. However I am using the > parallel port for the LCD and a serial port for the IR receiver. It is > awfully useful that these are internal. > > So I'd guess the next question is now what is the perfect MB for freevo? > > One would need: > > -capable of playing mpeg2,mp3,mpeg4 > -low noise (this also implies low-noise/fanless CPU setup) > -at least 2 PCI slots > -TV-out,optionally HD-TV-out > -good sound > -good price > > Which MB fits the bill? > > Paul > > > The ABIT IL-90MV looks an interesting choice. m-ATX, dual core (479 pin > for low noise), ATA & SATA with RAID, HDMI, SPDIF in & out, 2 USB2 & 1 > firewire, 2 x PCI & 1 x PCI express. No SD TV out and 3D performance > wouldn't be great but at the price this looks a bargain. Are there any > other boards like this or barebone systems with HDMI (I've just got a > 32" with HDMI - hence the interest :) ) > > John > > - > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ___ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > - > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ___ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > -- > Paul Sijben mailto:[EMAIL PROTECTED] > Amersfoort, NL http://www.sijben.net > tel:+31 334557522 fax:+31 33 4557523 > > - > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > ___ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] wakeupshutdown.py "bug", system is UTC, BIOS isone hour earlier
use /etc/adjtime to determine wheter your BIOS time is UTC (man hwclock), or add a switch to local_conf.py, i.e.: if (config.BIOS_TIME = 'utc') wakeup = time.gmtime(wakeup) else: wakeup = time.localtime(wakeup) or if os.system(`grep -i utc /etc/adjtime > /dev/null 2>&1`): wakeup = time.localtime(wakeup) else: wakeup = time.gmtime(wakeup) and all the above is of course untested :-) ...juerg > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Henrik Farre > Sent: Wednesday, November 16, 2005 3:25 AM > To: freevo-users@lists.sourceforge.net > Subject: Re: [Freevo-users] wakeupshutdown.py "bug", system > is UTC, BIOS isone hour earlier > > lør, 12 11 2005 kl. 22:54 +0100, skrev Henrik Farre: > > > wakeup_time = start_time - config.TV_RECORD_PADDING - > > config.BOOTTIME_PADDING - 1 > > A fellow Freevo user pointed out to me that the value is in > seconds, so it should be - 3600 and not -1 :) > > -- > Mvh. / Kind regards > Henrik Farre - http://www.rockhopper.dk > --- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_idv28&alloc_id845&op=click ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Mplayer has the hiccups...
Hi, I'm running into this strange problem that I'm not able to solve. Whenever I watch a certain real video stream via freevo/mplayer the video stutters and it looks like it's skipping frames every 2 seconds or so. Audio is fine and CPU usage is around 75%. Mplayer gets called by Freevo the following way: app=/usr/bin/mplayer -autosync 100 -nolirc -autoq 100 -screenw 800 -screenh 600 -fs -slave -ao alsa -v -vo xv,sdl,x11 -cache 2048 rtsp://63.236.6.228:554/ondemand/7/1927/11457/v10092005/swissinfo.download.akamai.com/11457/sfdrs/ts/TS_09102005-450k.rm -vf pp=de, poll=-1 Now the strange thing is if I run exactly the same command outside of Freevo (with Freevo still running in the back), everything is just fine and the video runs smoothly. I also tried to disable audio and bumping mplayers priority (renice to -20) when running it through Freevo but that didn't make a difference. Any ideas? Thanks ...juerg --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recordserver crash
Hi, Thanks for all your help, I got it working now. There's 2 different ways to fix it: 1) disable DEBUG (DEBUG=0) 2) patch v4l2.py ...juerg > Hi, > > Disable DEBUG in local_conf.py and record something again. With DEBUG > enabled there is probably some freevo recorserver ioctl which is not > supported in later ivtv drivers. With DEBUG=0 you can workaround > this prob. > > /Robert > > On Friday, October 7, 2005, 8:09:36 AM, Juerg wrote: > >> Hello, > >> I finally managed to get most of my Freevo box working (including >> watching TV). But when I try to record a show I get the following >> error dump in the recordserver log: > >> 2005/10/06 22:30 PDT [*RecordServer*] SAVE: saving cached file >> (/var/cache/freevo/record_schedule.xml) >> 2005/10/06 22:30 PDT [*RecordServer*] SAVE: ScheduledRecordings has 1 >> items. >> 2005/10/06 22:30 PDT [*RecordServer*] start recording >> 2005/10/06 22:30 PDT [*RecordServer*] Recorder::Record: 2005-10-06 >> 22:30 to 2005-10-06 23:00 4_KRON Sex and the City >> 2005/10/06 22:30 PDT [*RecordServer*] Record_Thread::run: mode=record >> 2005/10/06 22:30 PDT [*RecordServer*] Record_Thread::run: started >> recording >> 2005/10/06 22:30 PDT [*RecordServer*] CHAN: 2 >> 2005/10/06 22:30 PDT [*RecordServer*] Video Opened at /dev/video0 >> 2005/10/06 22:30 PDT [*RecordServer*] Setting Input to 6 >> 2005/10/06 22:30 PDT [*RecordServer*] Setting Channel to 4 >> 2005/10/06 22:30 PDT [*RecordServer*] USING STANDARD FREQUENCY: >> chan="4", freq="67250" >> 2005/10/06 22:30 PDT [*RecordServer*] Video Opened at /dev/video0 >> 2005/10/06 22:30 PDT [*RecordServer*] Driver: ivtv >> 2005/10/06 22:30 PDT [*RecordServer*] Card: WinTV PVR 150 >> 2005/10/06 22:30 PDT [*RecordServer*] Version: 777 >> 2005/10/06 22:30 PDT [*RecordServer*] Capabilities: 17235985 >> 2005/10/06 22:30 PDT [*RecordServer*] Enumerating supported Standards. >> 2005/10/06 22:30 PDT [*RecordServer*] 0: 0x3000 NTSC >> 2005/10/06 22:30 PDT [*RecordServer*] 1: 0xff PAL >> 2005/10/06 22:30 PDT [*RecordServer*] 2: 0x7f SECAM >> 2005/10/06 22:30 PDT [*RecordServer*] Current Standard is: 0x3000 >> 2005/10/06 22:30 PDT [*RecordServer*] Enumerating supported Inputs. >> 2005/10/06 22:30 PDT [*RecordServer*] 0: S-Video 0 >> 2005/10/06 22:30 PDT [*RecordServer*] 1: S-Video 1 >> 2005/10/06 22:30 PDT [*RecordServer*] 2: Composite 0 >> 2005/10/06 22:30 PDT [*RecordServer*] 3: Composite 1 >> 2005/10/06 22:30 PDT [*RecordServer*] 4: Composite 2 >> 2005/10/06 22:30 PDT [*RecordServer*] 5: Composite 3 >> 2005/10/06 22:30 PDT [*RecordServer*] 6: Tuner 0 >> 2005/10/06 22:30 PDT [*RecordServer*] 7: Tuner 1 >> 2005/10/06 22:30 PDT [*RecordServer*] Input: 6 >> 2005/10/06 22:30 PDT [*RecordServer*] Exception in thread Thread-1: >> 2005/10/06 22:30 PDT [*RecordServer*] Traceback (most recent call last): >> 2005/10/06 22:30 PDT [*RecordServer*] File >> "/usr/lib/python2.3/threading.py", line 436, in __bootstrap >> 2005/10/06 22:30 PDT [*RecordServer*] self.run() >> 2005/10/06 22:30 PDT [*RecordServer*] File >> "/usr/lib/python2.3/site-packages/freevo/tv/plugins/ivtv_record.py", >> line 160, in run >> 2005/10/06 22:30 PDT [*RecordServer*] if DEBUG: v.print_settings() >> 2005/10/06 22:30 PDT [*RecordServer*] File >> "/usr/lib/python2.3/site-packages/freevo/tv/ivtv.py", line 139, in >> print_settings >> 2005/10/06 22:30 PDT [*RecordServer*] >> tv.v4l2.Videodev.print_settings(self) >> 2005/10/06 22:30 PDT [*RecordServer*] File >> "/usr/lib/python2.3/site-packages/freevo/tv/v4l2.py", line 316, in >> print_settings >> 2005/10/06 22:30 PDT [*RecordServer*] (buf_type, width, height, >> pixelformat, field, bytesperline, >> 2005/10/06 22:30 PDT [*RecordServer*] File >> "/usr/lib/python2.3/site-packages/freevo/tv/v4l2.py", line 247, in >> getfmt >> 2005/10/06 22:30 PDT [*RecordServer*] r = >> fcntl.ioctl(self.device,GET_FMT_NO,val) >> 2005/10/06 22:30 PDT [*RecordServer*] IOError: [Errno 22] Invalid >> argument >> 2005/10/06 22:30 PDT [*RecordServer*] >> 2005/10/06 22:31 PDT [*RecordServer*] in checkToRecord > >> Any help is greatly appreciated! > >> Regards >> ...juerg > > >> --- >> This SF.Net email is sponsored by: >> Power Architecture Resource Center: Free content, downloads, >> discussions, >> and more. http://solutions.newsforge.com/ibmarch.tmpl >> ___ >> Freevo-users mailing list >> Freevo-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] recordserver crash
Hello, I finally managed to get most of my Freevo box working (including watching TV). But when I try to record a show I get the following error dump in the recordserver log: 2005/10/06 22:30 PDT [*RecordServer*] SAVE: saving cached file (/var/cache/freevo/record_schedule.xml) 2005/10/06 22:30 PDT [*RecordServer*] SAVE: ScheduledRecordings has 1 items. 2005/10/06 22:30 PDT [*RecordServer*] start recording 2005/10/06 22:30 PDT [*RecordServer*] Recorder::Record: 2005-10-06 22:30 to 2005-10-06 23:00 4_KRON Sex and the City 2005/10/06 22:30 PDT [*RecordServer*] Record_Thread::run: mode=record 2005/10/06 22:30 PDT [*RecordServer*] Record_Thread::run: started recording 2005/10/06 22:30 PDT [*RecordServer*] CHAN: 2 2005/10/06 22:30 PDT [*RecordServer*] Video Opened at /dev/video0 2005/10/06 22:30 PDT [*RecordServer*] Setting Input to 6 2005/10/06 22:30 PDT [*RecordServer*] Setting Channel to 4 2005/10/06 22:30 PDT [*RecordServer*] USING STANDARD FREQUENCY: chan="4", freq="67250" 2005/10/06 22:30 PDT [*RecordServer*] Video Opened at /dev/video0 2005/10/06 22:30 PDT [*RecordServer*] Driver: ivtv 2005/10/06 22:30 PDT [*RecordServer*] Card: WinTV PVR 150 2005/10/06 22:30 PDT [*RecordServer*] Version: 777 2005/10/06 22:30 PDT [*RecordServer*] Capabilities: 17235985 2005/10/06 22:30 PDT [*RecordServer*] Enumerating supported Standards. 2005/10/06 22:30 PDT [*RecordServer*] 0: 0x3000 NTSC 2005/10/06 22:30 PDT [*RecordServer*] 1: 0xff PAL 2005/10/06 22:30 PDT [*RecordServer*] 2: 0x7f SECAM 2005/10/06 22:30 PDT [*RecordServer*] Current Standard is: 0x3000 2005/10/06 22:30 PDT [*RecordServer*] Enumerating supported Inputs. 2005/10/06 22:30 PDT [*RecordServer*] 0: S-Video 0 2005/10/06 22:30 PDT [*RecordServer*] 1: S-Video 1 2005/10/06 22:30 PDT [*RecordServer*] 2: Composite 0 2005/10/06 22:30 PDT [*RecordServer*] 3: Composite 1 2005/10/06 22:30 PDT [*RecordServer*] 4: Composite 2 2005/10/06 22:30 PDT [*RecordServer*] 5: Composite 3 2005/10/06 22:30 PDT [*RecordServer*] 6: Tuner 0 2005/10/06 22:30 PDT [*RecordServer*] 7: Tuner 1 2005/10/06 22:30 PDT [*RecordServer*] Input: 6 2005/10/06 22:30 PDT [*RecordServer*] Exception in thread Thread-1: 2005/10/06 22:30 PDT [*RecordServer*] Traceback (most recent call last): 2005/10/06 22:30 PDT [*RecordServer*] File "/usr/lib/python2.3/threading.py", line 436, in __bootstrap 2005/10/06 22:30 PDT [*RecordServer*] self.run() 2005/10/06 22:30 PDT [*RecordServer*] File "/usr/lib/python2.3/site-packages/freevo/tv/plugins/ivtv_record.py", line 160, in run 2005/10/06 22:30 PDT [*RecordServer*] if DEBUG: v.print_settings() 2005/10/06 22:30 PDT [*RecordServer*] File "/usr/lib/python2.3/site-packages/freevo/tv/ivtv.py", line 139, in print_settings 2005/10/06 22:30 PDT [*RecordServer*] tv.v4l2.Videodev.print_settings(self) 2005/10/06 22:30 PDT [*RecordServer*] File "/usr/lib/python2.3/site-packages/freevo/tv/v4l2.py", line 316, in print_settings 2005/10/06 22:30 PDT [*RecordServer*] (buf_type, width, height, pixelformat, field, bytesperline, 2005/10/06 22:30 PDT [*RecordServer*] File "/usr/lib/python2.3/site-packages/freevo/tv/v4l2.py", line 247, in getfmt 2005/10/06 22:30 PDT [*RecordServer*] r = fcntl.ioctl(self.device,GET_FMT_NO,val) 2005/10/06 22:30 PDT [*RecordServer*] IOError: [Errno 22] Invalid argument 2005/10/06 22:30 PDT [*RecordServer*] 2005/10/06 22:31 PDT [*RecordServer*] in checkToRecord Any help is greatly appreciated! Regards ...juerg --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
