Re: [Freevo-users] Re: Recording problems, almost there!
Rob Shortt wrote: Tim Walter wrote: Freevo setup and working for TV and playing DVDs, also web interface works fine. Can set up recordings via web and all appears to work, channel choice, timing (out by an hour but can sort that later!), save The out by one hour problem has to do with manualrecord.rpy and python2.2. I have been meaning to fix that. I did some work on this last night and committed changes into CVS. It is working properly for me now, CVS users please test. Anon CVS is probably too far behind but the snapshots should be ok. -Rob --- This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Re: Recording problems, almost there!
In message <[EMAIL PROTECTED]>, Rob Shortt <[EMAIL PROTECTED]> writes Tim Walter wrote: Freevo setup and working for TV and playing DVDs, also web interface works fine. Can set up recordings via web and all appears to work, channel choice, timing (out by an hour but can sort that later!), save The out by one hour problem has to do with manualrecord.rpy and python2.2. I have been meaning to fix that. Thanks. Is there a way to fix it locally (for a newbie!) and it appears to run and remove itself from pending list but then no recording appears (so I assume the recordserver is functioning normally) In the freevo interface F6 appears to initiate a recording (but no choice re timing given at all) but again no output files found. Your mencoder command is probably failing. Please check your recordserver log for details, and the command line it is using. It should be /var/log/freevo/recordserver-0.log or under /tmp/ somewhere if you have no /var/log/freevo/. See below. (I set the line for sound to -nosound to try and remove the -oac problems which running the command via commandline gave) Still no joy. Noted in the webserver log error comments. ?Relevant? Any help gratefully received Tim To clarify. Running mencoder from command line on avi files and basic commands works OK Record server log 2003/10/20 15:15 BST [*RecordServer*] Recorder::Record: /usr/bin/mencoder -tv on:driver=v4l:input=0:norm=pal:channel=35:chanlist=europe-west:width=320: height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp4:audiorate=320 00:forceaudio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -nosound -ffourcc divx -endpos 289 -o /media/video/recorded/10-20_15:15_abcde_-_.avi 2003/10/20 15:15 BST [*RecordServer*] Record_Thread::run: mode=record 2003/10/20 15:15 BST [*RecordServer*] Record_Thread::run: cmd=/usr/bin/mencoder -tv on:driver=v4l:input=0:norm=pal:channel=35:chanlist=europe-west:width=320: height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp4:audiorate=320 00:forceaudio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -nosound -ffourcc divx -endpos 289 -o /media/video/recorded/10-20_15:15_abcde_-_.avi 2003/10/20 15:15 BST [*RecordServer*] Record_Thread::run: past wait()!! 2003/10/20 15:15 BST [*RecordServer*] Record_Thread::run: mode=idle Web server log for same period 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] 192.168.0.6 - - [20/Oct/2003:14:20:50 +] "" 200 2535 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225" 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] 192.168.0.6 - - [20/Oct/2003:14:20:51 +] "" 304 - "http://192.168.0.6:8080/record.rpy"; "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225" 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] 192.168.0.6 - - [20/Oct/2003:14:20:51 +] "" 304 - "http://192.168.0.6:8080/record.rpy"; "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225" 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] I do not process names(None) with slashes for security reasons. 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] 192.168.0.6 - - [20/Oct/2003:14:20:53 +] "" 200 2865 "http://192.168.0.6:8080/record.rpy"; "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225" 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] I do not process names(None) with slashes for security reasons. 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] 192.168.0.6 - - [20/Oct/2003:14:20:54 +] "" 200 2885 "http://192.168.0.6:8080/library.rpy"; "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225" 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] I do not process names(None) with slashes for security reasons. 2003/10/20 15:20 BST [HTTPChannel,0,192.168.0.6] 192.168.0.6 - - [20/Oct/2003:14:20:57 +] "" 200 2865 "http://192.168.0.6:8080/library.rpy?media=rectv&dir=/media/video/recorde d" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225" -- Tim http://yingtong.co.uk AMD Athlon 1000, 400Mb Ram, 40GB HD Hauppauge PCI TV card, PAL Radeon 9200 VO, RH9, Freevo1.3.4 --- This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Re: Recording problems, almost there!
Tim Walter wrote: Freevo setup and working for TV and playing DVDs, also web interface works fine. Can set up recordings via web and all appears to work, channel choice, timing (out by an hour but can sort that later!), save The out by one hour problem has to do with manualrecord.rpy and python2.2. I have been meaning to fix that. and it appears to run and remove itself from pending list but then no recording appears (so I assume the recordserver is functioning normally) In the freevo interface F6 appears to initiate a recording (but no choice re timing given at all) but again no output files found. Your mencoder command is probably failing. Please check your recordserver log for details, and the command line it is using. It should be /var/log/freevo/recordserver-0.log or under /tmp/ somewhere if you have no /var/log/freevo/. -Rob --- This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Re: Recording problems, almost there!
Hi, Ongoing saga, but almost sorted... 1.4rc1 Installed and working Mplayer installed and working mencoder installed and working standalone via commandline Freevo setup and working for TV and playing DVDs, also web interface works fine. Can set up recordings via web and all appears to work, channel choice, timing (out by an hour but can sort that later!), save and it appears to run and remove itself from pending list but then no recording appears (so I assume the recordserver is functioning normally) In the freevo interface F6 appears to initiate a recording (but no choice re timing given at all) but again no output files found. If I take the commands from VCR_Settings and run them from the commandline then mencoder objects to "no audio encoder (-oac) selected" even though there is and even if I alter this line... e.g. I try and run this line mencoder -tv on:driver=v4l:input=1 :norm=pal channel=66 chanlist=europe-west device=/dev/video0 adevice=/dev/dsp4 -ovc lavc -lavcopts vcodec=mpeg4 -oac mp3lame -lameopts br=128:cbr:mode=3 -o x.avi Info VCR_CMD = ('/usr/bin/mencoder ' +# Change. Absolute path to the runtime '-tv on:driver=v4l:input=0' + # Input 0 = Comp. V. in ':norm=pal' + # Change ':channel=%(channel)s' + # Filled in by Freevo ':chanlist=europe-west' + # Change ':width=320:height=240' + # Change if needed ':outfmt=yv12' +# Prob. ok, yuy2 might be faster ':device=/dev/video0' + # CHANGE! ':adevice=/dev/dsp4' + # CHANGE! ':audiorate=32000' +# 44100 for better sound ':forceaudio:forcechan=1:' +# Forced mono for bug in my driver 'buffersize=64' + # 64 Megabyte capture buffer, change? ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec 'vcodec=mpeg4' +# lavcodec mpeg-4 ':vbitrate=1200:' + # Change lower/higher, bitrate 'keyint=30 ' + # Keyframe every 10 secs, change? '-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s '-ffourcc divx ' + # Force 'divx' ident, better compat. '-endpos %(seconds)s ' +# only mencoder uses this so do it here. '-o %(filename)s.avi ') # Filled in by Freevo --- This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users