Re: Fw: FTP-Code page
On 19 March 2010 12:16, Ron Wells wrote: > Not doing what I was hoping ..so question > If PC that is FTP'ing to me is using code page 437 Are you sure it is using CP 437? That was typically used by MS DOS, and not by Windows. How did the data get onto the PC? In CP 437, an upper case N-tilde (Ñ) is X'A5'. In CP 819 (ISO Latin-1) and "Windows Western" it is at X'D1'. So you need to be sure what you are converting *from*, first. How are you viewing the Ñ on the PC? Browse the data with a hex editor and be sure. > what would the code page for ascii to ebcdic for converting Spanish N(~) > tilde on top of the N.?? Then you need to think about the target code page. If you are in North America, it is probably either CP 037 or 1140, but both have Ñ in the same position X'69'. If you are using one of the European CPs, such as that for Spain (CP 284 with Ñ at X'7B'), then you have a different requirement. What is going to be processing or displaying/printing the EBCDIC data on the mainframe? If it is going to wind up being displayed on a 3270 that is actually a PC emulator, then you need to think about the translation back to ASCII at that stage! Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Fw: FTP-Code page
Not doing what I was hoping ..so question If PC that is FTP'ing to me is using code page 437 what would the code page for ascii to ebcdic for converting Spanish N(~) >> tilde on top of the N.?? - Forwarded by Ron Wells/AGFS/AGFin on 03/19/2010 11:14 AM - From: Ron Wells/AGFS/AGFin To: IBM Mainframe Discussion List Date: 03/19/2010 08:15 AM Subject: Re: FTP-Code page looks like it maybe 1145 code page... so>> I run convx against that(it is my seza lib..as espanish) naming it tcpip.standard.tcpspbin .. the command quote site sbd=TCPIP.STANDARD.TCPSPBIN this seem correct?? From: "Staller, Allan" To: IBM-MAIN@bama.ua.edu Date: 03/19/2010 08:02 AM Subject: Re: FTP-Code page Sent by: IBM Mainframe Discussion List Try http://www-01.ibm.com/software/globalization/g11n-res.jsp HTH, Have a file...on a PC..ascii to be ftp'd to mainframe... the data has spanish name...some not all..is there a code page that can be specified to alter or leave the character(s) alone...tried the spanish member in SEZATCPX and ran a CONVXLAT and generated a new file.. had them to ftp using following... quote site sbd=TCPIP.IBMX284.TCPXLBIN the ibmx284 is the new dataset created... the character is a N ~(tilde) on top...it gets converted to a D... maybe this s/b left alone?? or am I missing something here .. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Email Disclaimer This E-mail contains confidential information belonging to the sender, which may be legally privileged information. This information is intended only for the use of the individual or entity addressed above. If you are not the intended recipient, or an employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of the E-mail or attached files is strictly prohibited. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html