Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
Shawn Anastasio writes: > On 7/22/19 7:16 AM, Michael Ellerman wrote: >> Arnd Bergmann writes: >>> On Thu, Jul 18, 2019 at 11:52 AM Christoph Hellwig wrote: On Thu, Jul 18, 2019 at 10:49:34AM +0200, Christoph Hellwig wrote: > On Thu, Jul 18, 2019 at 01:45:16PM +1000, Oliver O'Halloran wrote: >>> Other than m68k, mips, and arm64, everybody else that doesn't have >>> ARCH_NO_COHERENT_DMA_MMAP set uses this default implementation, so >>> I assume this behavior is acceptable on those architectures. >> >> It might be acceptable, but there's no reason to use pgport_noncached >> if the platform supports cache-coherent DMA. >> >> Christoph (+cc) made the change so maybe he saw something we're missing. > > I always found the forcing of noncached access even for coherent > devices a little odd, but this was inherited from the previous > implementation, which surprised me a bit as the different attributes > are usually problematic even on x86. Let me dig into the history a > bit more, but I suspect the righ fix is to default to cached mappings > for coherent devices. Ok, some history: The generic dma mmap implementation, which we are effectively still using today was added by: commit 64ccc9c033c6089b2d426dad3c56477ab066c999 Author: Marek Szyprowski Date: Thu Jun 14 13:03:04 2012 +0200 common: dma-mapping: add support for generic dma_mmap_* calls and unconditionally uses pgprot_noncached in dma_common_mmap, which is then used as the fallback by dma_mmap_attrs if no ->mmap method is present. At that point we already had the powerpc implementation that only uses pgprot_noncached for non-coherent mappings, and the arm one, which uses pgprot_writecombine if DMA_ATTR_WRITE_COMBINE is set and otherwise pgprot_dmacoherent, which seems to be uncached. Arm did support coherent platforms at that time, but they might have been an afterthought and not handled properly. >>> >>> Cache-coherent devices are still very rare on 32-bit ARM. >>> >>> Among the callers of dma_mmap_coherent(), almost all are in platform >>> specific device drivers that only ever run on noncoherent ARM SoCs, >>> which explains why nobody would have noticed problems. >>> >>> There is also a difference in behavior between ARM and PowerPC >>> when dealing with mismatched cacheability attributes: If the same >>> page is mapped as both cached and uncached to, this may >>> cause silent undefined behavior on ARM, while PowerPC should >>> enter a checkstop as soon as it notices. >> >> On newer Power CPUs it's actually more like the ARM behaviour. >> >> I don't know for sure that it will *never* checkstop but there are at >> least cases where it won't. There's some (not much) detail in the >> Power8/9 user manuals. > > The issue was discovered due to sporadic checkstops on P9, so it > seems like it will happen at least sometimes. Yeah true. I wasn't sure if that checkstop was actually caused by a cached/uncached mismatch or something else, but looks like it was, from the hostboot issue (https://github.com/open-power/hostboot/issues/180): 12.47015| Signature Description: pu.ex:k0:n0:s0:p00:c0 (L2FIR[16]) Cache line inhibited hit cacheable space So I'm not really sure how to square that with the documentation in the user manual: If a caching-inhibited load instruction hits in the L1 data cache, the load data is serviced from the L1 data cache and no request is sent to the NCU. If a caching-inhibited store instruction hits in the L1 data cache, the store data is written to the L1 data cache and sent to the NCU. Note that the L1 data cache and L2 cache are no longer coherent. I guess I'm either misinterpreting that section or there's some *other* documentation somewhere I haven't found that says that it will also checkstop. cheers ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
On 7/22/19 7:16 AM, Michael Ellerman wrote: Arnd Bergmann writes: On Thu, Jul 18, 2019 at 11:52 AM Christoph Hellwig wrote: On Thu, Jul 18, 2019 at 10:49:34AM +0200, Christoph Hellwig wrote: On Thu, Jul 18, 2019 at 01:45:16PM +1000, Oliver O'Halloran wrote: Other than m68k, mips, and arm64, everybody else that doesn't have ARCH_NO_COHERENT_DMA_MMAP set uses this default implementation, so I assume this behavior is acceptable on those architectures. It might be acceptable, but there's no reason to use pgport_noncached if the platform supports cache-coherent DMA. Christoph (+cc) made the change so maybe he saw something we're missing. I always found the forcing of noncached access even for coherent devices a little odd, but this was inherited from the previous implementation, which surprised me a bit as the different attributes are usually problematic even on x86. Let me dig into the history a bit more, but I suspect the righ fix is to default to cached mappings for coherent devices. Ok, some history: The generic dma mmap implementation, which we are effectively still using today was added by: commit 64ccc9c033c6089b2d426dad3c56477ab066c999 Author: Marek Szyprowski Date: Thu Jun 14 13:03:04 2012 +0200 common: dma-mapping: add support for generic dma_mmap_* calls and unconditionally uses pgprot_noncached in dma_common_mmap, which is then used as the fallback by dma_mmap_attrs if no ->mmap method is present. At that point we already had the powerpc implementation that only uses pgprot_noncached for non-coherent mappings, and the arm one, which uses pgprot_writecombine if DMA_ATTR_WRITE_COMBINE is set and otherwise pgprot_dmacoherent, which seems to be uncached. Arm did support coherent platforms at that time, but they might have been an afterthought and not handled properly. Cache-coherent devices are still very rare on 32-bit ARM. Among the callers of dma_mmap_coherent(), almost all are in platform specific device drivers that only ever run on noncoherent ARM SoCs, which explains why nobody would have noticed problems. There is also a difference in behavior between ARM and PowerPC when dealing with mismatched cacheability attributes: If the same page is mapped as both cached and uncached to, this may cause silent undefined behavior on ARM, while PowerPC should enter a checkstop as soon as it notices. On newer Power CPUs it's actually more like the ARM behaviour. I don't know for sure that it will *never* checkstop but there are at least cases where it won't. There's some (not much) detail in the Power8/9 user manuals. The issue was discovered due to sporadic checkstops on P9, so it seems like it will happen at least sometimes. cheers ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
Arnd Bergmann writes: > On Thu, Jul 18, 2019 at 11:52 AM Christoph Hellwig wrote: >> On Thu, Jul 18, 2019 at 10:49:34AM +0200, Christoph Hellwig wrote: >> > On Thu, Jul 18, 2019 at 01:45:16PM +1000, Oliver O'Halloran wrote: >> > > > Other than m68k, mips, and arm64, everybody else that doesn't have >> > > > ARCH_NO_COHERENT_DMA_MMAP set uses this default implementation, so >> > > > I assume this behavior is acceptable on those architectures. >> > > >> > > It might be acceptable, but there's no reason to use pgport_noncached >> > > if the platform supports cache-coherent DMA. >> > > >> > > Christoph (+cc) made the change so maybe he saw something we're missing. >> > >> > I always found the forcing of noncached access even for coherent >> > devices a little odd, but this was inherited from the previous >> > implementation, which surprised me a bit as the different attributes >> > are usually problematic even on x86. Let me dig into the history a >> > bit more, but I suspect the righ fix is to default to cached mappings >> > for coherent devices. >> >> Ok, some history: >> >> The generic dma mmap implementation, which we are effectively still >> using today was added by: >> >> commit 64ccc9c033c6089b2d426dad3c56477ab066c999 >> Author: Marek Szyprowski >> Date: Thu Jun 14 13:03:04 2012 +0200 >> >> common: dma-mapping: add support for generic dma_mmap_* calls >> >> and unconditionally uses pgprot_noncached in dma_common_mmap, which is >> then used as the fallback by dma_mmap_attrs if no ->mmap method is >> present. At that point we already had the powerpc implementation >> that only uses pgprot_noncached for non-coherent mappings, and >> the arm one, which uses pgprot_writecombine if DMA_ATTR_WRITE_COMBINE >> is set and otherwise pgprot_dmacoherent, which seems to be uncached. >> Arm did support coherent platforms at that time, but they might have >> been an afterthought and not handled properly. > > Cache-coherent devices are still very rare on 32-bit ARM. > > Among the callers of dma_mmap_coherent(), almost all are in platform > specific device drivers that only ever run on noncoherent ARM SoCs, > which explains why nobody would have noticed problems. > > There is also a difference in behavior between ARM and PowerPC > when dealing with mismatched cacheability attributes: If the same > page is mapped as both cached and uncached to, this may > cause silent undefined behavior on ARM, while PowerPC should > enter a checkstop as soon as it notices. On newer Power CPUs it's actually more like the ARM behaviour. I don't know for sure that it will *never* checkstop but there are at least cases where it won't. There's some (not much) detail in the Power8/9 user manuals. cheers ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
On Thu, Jul 18, 2019 at 11:52 AM Christoph Hellwig wrote: > > On Thu, Jul 18, 2019 at 10:49:34AM +0200, Christoph Hellwig wrote: > > On Thu, Jul 18, 2019 at 01:45:16PM +1000, Oliver O'Halloran wrote: > > > > Other than m68k, mips, and arm64, everybody else that doesn't have > > > > ARCH_NO_COHERENT_DMA_MMAP set uses this default implementation, so > > > > I assume this behavior is acceptable on those architectures. > > > > > > It might be acceptable, but there's no reason to use pgport_noncached > > > if the platform supports cache-coherent DMA. > > > > > > Christoph (+cc) made the change so maybe he saw something we're missing. > > > > I always found the forcing of noncached access even for coherent > > devices a little odd, but this was inherited from the previous > > implementation, which surprised me a bit as the different attributes > > are usually problematic even on x86. Let me dig into the history a > > bit more, but I suspect the righ fix is to default to cached mappings > > for coherent devices. > > Ok, some history: > > The generic dma mmap implementation, which we are effectively still > using today was added by: > > commit 64ccc9c033c6089b2d426dad3c56477ab066c999 > Author: Marek Szyprowski > Date: Thu Jun 14 13:03:04 2012 +0200 > > common: dma-mapping: add support for generic dma_mmap_* calls > > and unconditionally uses pgprot_noncached in dma_common_mmap, which is > then used as the fallback by dma_mmap_attrs if no ->mmap method is > present. At that point we already had the powerpc implementation > that only uses pgprot_noncached for non-coherent mappings, and > the arm one, which uses pgprot_writecombine if DMA_ATTR_WRITE_COMBINE > is set and otherwise pgprot_dmacoherent, which seems to be uncached. > Arm did support coherent platforms at that time, but they might have > been an afterthought and not handled properly. Cache-coherent devices are still very rare on 32-bit ARM. Among the callers of dma_mmap_coherent(), almost all are in platform specific device drivers that only ever run on noncoherent ARM SoCs, which explains why nobody would have noticed problems. There is also a difference in behavior between ARM and PowerPC when dealing with mismatched cacheability attributes: If the same page is mapped as both cached and uncached to, this may cause silent undefined behavior on ARM, while PowerPC should enter a checkstop as soon as it notices. Arnd ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
On 7/19/19 2:06 AM, Christoph Hellwig wrote: > What is inherently architecture specific here over the fact that > the pgprot_* expand to architecture specific bits? What I meant is that different architectures seem to have different criteria for setting the different pgprot_ bits. i.e. ppc checks for cache coherency, arm64 checks for cache coherency and writecombine, mips just checks for writecombine, etc. That being said, I'm no expert here and there is probably some behavior here that would make for a much more sane default. > I'd rather not create boilerplate code where we don't have to it. Note > that arch_dma_mmap_pgprot is a little misnamed now, as we also use it > for the in-kernel remapping in kernel/dma/remap.c, which I'm slowly > switching a lot of architectures to. powerpc will follow soon once > I get the ppc44x that was given to me to actually boot with a recent > kernel (not that I've tried much so far). Fair enough. I didn't realize that most of the other architectures don't use the common code anyways as you mention below. > Every arch except for arm32 now uses dma direct for the direct mapping, > and thus the common code without the indeed odd default. I also have > a series to remove the default fallback, which is inherently a bad idea: > > http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-no-defaults Awesome. This is great to hear. > I think your patch that started this thread is fine for 5.3 and -stable: > > Reviewed-by: Christoph Hellwig Thanks! > But going forward I'd rather have a sane default. Agreed. ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
On Thu, Jul 18, 2019 at 02:46:00PM -0500, Shawn Anastasio wrote: > Personally, I'm not a huge fan of an implicit default for something > inherently architecture-dependent like this at all. What is inherently architecture specific here over the fact that the pgprot_* expand to architecture specific bits? > What I'd like to > see is a mechanism that forces architecture code to explicitly > opt in to the default pgprot settings if they don't provide an > implementation of arch_dma_mmap_pgprot. This could perhaps be done > by reversing ARCH_HAS_DMA_MMAP_PGPROT to something like > ARCH_USE_DEFAULT_DMA_MMAP_PGPROT. I'd rather not create boilerplate code where we don't have to it. Note that arch_dma_mmap_pgprot is a little misnamed now, as we also use it for the in-kernel remapping in kernel/dma/remap.c, which I'm slowly switching a lot of architectures to. powerpc will follow soon once I get the ppc44x that was given to me to actually boot with a recent kernel (not that I've tried much so far). > > This way as more systems are moved to use the common mmap code instead > of their ops->mmap, the people doing the refactoring have to make an > explicit decision about the pgprot settings to use. Such a configuration > would have likely prevented this situation with powerpc from happening. Every arch except for arm32 now uses dma direct for the direct mapping, and thus the common code without the indeed odd default. I also have a series to remove the default fallback, which is inherently a bad idea: http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-no-defaults > That being said, if the default behavior doesn't make sense in the > general case it should probably be fixed as well. > > Curious to hear some thoughts on this. I think your patch that started this thread is fine for 5.3 and -stable: Reviewed-by: Christoph Hellwig But going forward I'd rather have a sane default. ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
On 7/18/19 4:52 AM, Christoph Hellwig wrote: On Thu, Jul 18, 2019 at 10:49:34AM +0200, Christoph Hellwig wrote: On Thu, Jul 18, 2019 at 01:45:16PM +1000, Oliver O'Halloran wrote: Other than m68k, mips, and arm64, everybody else that doesn't have ARCH_NO_COHERENT_DMA_MMAP set uses this default implementation, so I assume this behavior is acceptable on those architectures. It might be acceptable, but there's no reason to use pgport_noncached if the platform supports cache-coherent DMA. Christoph (+cc) made the change so maybe he saw something we're missing. I always found the forcing of noncached access even for coherent devices a little odd, but this was inherited from the previous implementation, which surprised me a bit as the different attributes are usually problematic even on x86. Let me dig into the history a bit more, but I suspect the righ fix is to default to cached mappings for coherent devices. Ok, some history: The generic dma mmap implementation, which we are effectively still using today was added by: commit 64ccc9c033c6089b2d426dad3c56477ab066c999 Author: Marek Szyprowski Date: Thu Jun 14 13:03:04 2012 +0200 common: dma-mapping: add support for generic dma_mmap_* calls and unconditionally uses pgprot_noncached in dma_common_mmap, which is then used as the fallback by dma_mmap_attrs if no ->mmap method is present. At that point we already had the powerpc implementation that only uses pgprot_noncached for non-coherent mappings, and the arm one, which uses pgprot_writecombine if DMA_ATTR_WRITE_COMBINE is set and otherwise pgprot_dmacoherent, which seems to be uncached. Arm did support coherent platforms at that time, but they might have been an afterthought and not handled properly. So it migt have been that we were all wrong for that time and might have to fix it up. Personally, I'm not a huge fan of an implicit default for something inherently architecture-dependent like this at all. What I'd like to see is a mechanism that forces architecture code to explicitly opt in to the default pgprot settings if they don't provide an implementation of arch_dma_mmap_pgprot. This could perhaps be done by reversing ARCH_HAS_DMA_MMAP_PGPROT to something like ARCH_USE_DEFAULT_DMA_MMAP_PGPROT. This way as more systems are moved to use the common mmap code instead of their ops->mmap, the people doing the refactoring have to make an explicit decision about the pgprot settings to use. Such a configuration would have likely prevented this situation with powerpc from happening. That being said, if the default behavior doesn't make sense in the general case it should probably be fixed as well. Curious to hear some thoughts on this. ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH] powerpc/dma: Fix invalid DMA mmap behavior
On Thu, Jul 18, 2019 at 10:49:34AM +0200, Christoph Hellwig wrote: > On Thu, Jul 18, 2019 at 01:45:16PM +1000, Oliver O'Halloran wrote: > > > Other than m68k, mips, and arm64, everybody else that doesn't have > > > ARCH_NO_COHERENT_DMA_MMAP set uses this default implementation, so > > > I assume this behavior is acceptable on those architectures. > > > > It might be acceptable, but there's no reason to use pgport_noncached > > if the platform supports cache-coherent DMA. > > > > Christoph (+cc) made the change so maybe he saw something we're missing. > > I always found the forcing of noncached access even for coherent > devices a little odd, but this was inherited from the previous > implementation, which surprised me a bit as the different attributes > are usually problematic even on x86. Let me dig into the history a > bit more, but I suspect the righ fix is to default to cached mappings > for coherent devices. Ok, some history: The generic dma mmap implementation, which we are effectively still using today was added by: commit 64ccc9c033c6089b2d426dad3c56477ab066c999 Author: Marek Szyprowski Date: Thu Jun 14 13:03:04 2012 +0200 common: dma-mapping: add support for generic dma_mmap_* calls and unconditionally uses pgprot_noncached in dma_common_mmap, which is then used as the fallback by dma_mmap_attrs if no ->mmap method is present. At that point we already had the powerpc implementation that only uses pgprot_noncached for non-coherent mappings, and the arm one, which uses pgprot_writecombine if DMA_ATTR_WRITE_COMBINE is set and otherwise pgprot_dmacoherent, which seems to be uncached. Arm did support coherent platforms at that time, but they might have been an afterthought and not handled properly. So it migt have been that we were all wrong for that time and might have to fix it up. ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
