Re: [j-nsp] M10i - %KERN-1-RT_PFE: RT msg op 1 (PREFIX ADD) failed, err 6 (No Memory) / RT msg op 3 (PREFIX CHANGE) failed, err 6 (No Memory)
Bjørn Tore Paulen schrieb: Might there be some issue with permissions here? If you login as root or similar you should be able to start shell. Thanks for your replies. I fixed the problem by rebooting the router yesterday. After that, i could login with start shell pfe network cfeb0 again. The M10i was running about 2,5 years without problems. If the problem occurs again in the near future i will consider RAM-Upgrade on CFEB. Regards, Alex ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] VPLS and M7i
Samit wrote: Hi list, I am beginner in terms of MPLS/VPLS technology and Junos. I was just exploring the possibilities of configuring,testing simulating VPLS using couple of M7i with PE-1GE-SX-B interfaces with Catalyst 3400ME doing QnQ and/or 802.1q (both scenario). As per the doc the built in Gig cannot be used for MPLS but I was just wondering whould there are any limitation in features/configuration while using PE-1GE-SX-B and/or any FE interface for VPLS in below scenario. Furthermore how many VPLS tunnel M7i will support and how stable would it be? Customer---3400ME--M7i--M7i---3400ME--Customer Any pointer would be a great help. Regards, Samit ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] M10i - %KERN-1-RT_PFE: RT msg op 1 (PREFIX ADD) failed, err 6 (No Memory) / RT msg op 3 (PREFIX CHANGE) failed, err 6 (No Memory)
Could be a memory leak... listensamm...@gmx.de wrote: Bjørn Tore Paulen schrieb: Might there be some issue with permissions here? If you login as root or similar you should be able to start shell. Thanks for your replies. I fixed the problem by rebooting the router yesterday. After that, i could login with start shell pfe network cfeb0 again. The M10i was running about 2,5 years without problems. If the problem occurs again in the near future i will consider RAM-Upgrade on CFEB. Regards, Alex ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.13/1912 - Release Date: 1/23/2009 6:54 PM ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] M10i - %KERN-1-RT_PFE: RT msg op 1 (PREFIX ADD) failed, err 6 (No Memory) / RT msg op 3 (PREFIX CHANGE) failed, err 6 (No Memory)
Hi Derick, I doubt that its a memory leak unless some new feature that could cause memory leak (due to a bug) or new configuration was added recently that could suddenly increase the number of routes on the router. It also can not be a memory leak if the router was running for 2.5 yrs without any reboot. Sometimes, this problem may happen on routers that are running for years without any reboot. DRAM on cfeb may get too much fragmented (just like a PC RAM). When any route operation such as ADD is done by the router, it may fail under such conditions if the router can not allocate contiguous block of memory (unfragmented) large enough to hold the routing data from the operation being performed. This can be completely normal and a simple reboot will fix this issue. This is needed since router does not have a defrag function like a PC :). If you think its not the reason, please work with JTAC to identify the root cause of the problem in future. Thanks, Nilesh. On 1/24/09 8:34 PM, Derick Winkworth dwinkwo...@att.net wrote: Could be a memory leak... listensamm...@gmx.de wrote: Bjørn Tore Paulen schrieb: Might there be some issue with permissions here? If you login as root or similar you should be able to start shell. Thanks for your replies. I fixed the problem by rebooting the router yesterday. After that, i could login with start shell pfe network cfeb0 again. The M10i was running about 2,5 years without problems. If the problem occurs again in the near future i will consider RAM-Upgrade on CFEB. Regards, Alex ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.13/1912 - Release Date: 1/23/2009 6:54 PM ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp