Re: [j-nsp] MPLS EX4550
We didnt find a solution because ex4550 (junos) code does not support 2 different families for the same interface (yet) ... Using 12.3R8 I think the new switches ex4600, ex4300 fiber and qfx5100 will support it considering junos ELS and it new hardware Sent from my iPhone > On Mar 6, 2015, at 18:01, Levi Pederson > wrote: > > Giuliano, > > I thank you for the prompt reply. I had originally thought that would create > a loop on the switch, but I believe you are right in that it will just shunt > the VLAN as anticipated. However, I was wondering if there was a a solution > that can be accomplished without having to use a loop-cable? > > Thank you, > > > Levi Pederson > Mankato Networks LLC > cell | 612.481.0769 > work | 612.787.7392 > levipeder...@mankatonetworks.net > > >> On Fri, Mar 6, 2015 at 2:57 PM, Giuliano (WZTECH) >> wrote: >> We have a situation here and we find a way ... We connect 2 interfaces in a >> optical cable loop ... One that came from a trunk interface ... Family >> ethernet-switching and other family mpls with L2-circuit to do a vlan >> traffic to enter in a mpls interface >> >> Sent from my iPhone >> >> > On Mar 6, 2015, at 17:51, Levi Pederson >> > wrote: >> > >> > All, >> > >> > I've got a simple MPLS setup with 4 EX4550's. >> > >> > They are currently in an incomplete ring but will soon have a full ring >> > situation. >> > >> > I've currently got 3 circuits on the transport working wonderfully. >> > However I'm trying to add another alas I'm a bit confused as how to >> > proceed. >> > >> > Previous other circuits were easier in the fact they were simply saying the >> > port on MPLS1-1 is equivalent to this port on MPLS 3-1. >> > >> > The new circuit is different in that I have to take a VLAN recieved on a >> > trunk port and send it through the MPLS network to 3-1 and then into a >> > vlan-tagged MX-10. >> > >> > I was wondering if anyone has attempted this and has any pointers. >> > >> > Thank you, >> > >> > *Levi Pederson* >> > Mankato Networks LLC >> > cell | 612.481.0769 >> > work | 612.787.7392 >> > levipeder...@mankatonetworks.net >> > ___ >> > juniper-nsp mailing list juniper-nsp@puck.nether.net >> > https://puck.nether.net/mailman/listinfo/juniper-nsp > ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] MPLS EX4550
Giuliano, I thank you for the prompt reply. I had originally thought that would create a loop on the switch, but I believe you are right in that it will just shunt the VLAN as anticipated. However, I was wondering if there was a a solution that can be accomplished without having to use a loop-cable? Thank you, *Levi Pederson* Mankato Networks LLC cell | 612.481.0769 work | 612.787.7392 levipeder...@mankatonetworks.net On Fri, Mar 6, 2015 at 2:57 PM, Giuliano (WZTECH) wrote: > We have a situation here and we find a way ... We connect 2 interfaces in > a optical cable loop ... One that came from a trunk interface ... Family > ethernet-switching and other family mpls with L2-circuit to do a vlan > traffic to enter in a mpls interface > > Sent from my iPhone > > > On Mar 6, 2015, at 17:51, Levi Pederson < > levipeder...@mankatonetworks.net> wrote: > > > > All, > > > > I've got a simple MPLS setup with 4 EX4550's. > > > > They are currently in an incomplete ring but will soon have a full ring > > situation. > > > > I've currently got 3 circuits on the transport working wonderfully. > > However I'm trying to add another alas I'm a bit confused as how to > proceed. > > > > Previous other circuits were easier in the fact they were simply saying > the > > port on MPLS1-1 is equivalent to this port on MPLS 3-1. > > > > The new circuit is different in that I have to take a VLAN recieved on a > > trunk port and send it through the MPLS network to 3-1 and then into a > > vlan-tagged MX-10. > > > > I was wondering if anyone has attempted this and has any pointers. > > > > Thank you, > > > > *Levi Pederson* > > Mankato Networks LLC > > cell | 612.481.0769 > > work | 612.787.7392 > > levipeder...@mankatonetworks.net > > ___ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] MPLS EX4550
We have a situation here and we find a way ... We connect 2 interfaces in a optical cable loop ... One that came from a trunk interface ... Family ethernet-switching and other family mpls with L2-circuit to do a vlan traffic to enter in a mpls interface Sent from my iPhone > On Mar 6, 2015, at 17:51, Levi Pederson > wrote: > > All, > > I've got a simple MPLS setup with 4 EX4550's. > > They are currently in an incomplete ring but will soon have a full ring > situation. > > I've currently got 3 circuits on the transport working wonderfully. > However I'm trying to add another alas I'm a bit confused as how to proceed. > > Previous other circuits were easier in the fact they were simply saying the > port on MPLS1-1 is equivalent to this port on MPLS 3-1. > > The new circuit is different in that I have to take a VLAN recieved on a > trunk port and send it through the MPLS network to 3-1 and then into a > vlan-tagged MX-10. > > I was wondering if anyone has attempted this and has any pointers. > > Thank you, > > *Levi Pederson* > Mankato Networks LLC > cell | 612.481.0769 > work | 612.787.7392 > levipeder...@mankatonetworks.net > ___ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] MPLS EX4550
All, I've got a simple MPLS setup with 4 EX4550's. They are currently in an incomplete ring but will soon have a full ring situation. I've currently got 3 circuits on the transport working wonderfully. However I'm trying to add another alas I'm a bit confused as how to proceed. Previous other circuits were easier in the fact they were simply saying the port on MPLS1-1 is equivalent to this port on MPLS 3-1. The new circuit is different in that I have to take a VLAN recieved on a trunk port and send it through the MPLS network to 3-1 and then into a vlan-tagged MX-10. I was wondering if anyone has attempted this and has any pointers. Thank you, *Levi Pederson* Mankato Networks LLC cell | 612.481.0769 work | 612.787.7392 levipeder...@mankatonetworks.net ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
