[Kernel-packages] [Bug 1049657] Re: My usb 3 hard drive is mounting very slowly
I'm using Xubuntu based on Ubuntu 12.04.3 LTS and the problem seems to be fixed. This bug report can be closed :) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1049657 Title: My usb 3 hard drive is mounting very slowly Status in “linux” package in Ubuntu: Incomplete Bug description: Hi ! I've go an usb 3 hard drive and i've got a problem on my xubuntu with it (i haven't got this problem on my debian squeeze). If i clic on « Monter le périphétique » (mount the hard drive), i've got this message : « Impossible de monter Système de fichiers 1,0 TB DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending » Also, i've got this with dmesg : arno@echalotte:~$ dmesg [...] [ 3998.904154] usb 2-5: new high-speed USB device number 2 using ehci_hcd [ 3999.070381] Initializing USB Mass Storage driver... [ 3999.070545] scsi6 : usb-storage 2-5:1.0 [ 3999.070644] usbcore: registered new interface driver usb-storage [ 3999.070646] USB Mass Storage support registered. [ 3999.098471] usbcore: registered new interface driver uas [ 4000.071192] scsi 6:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 4000.074467] scsi 6:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 4000.080533] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 4000.080825] scsi 6:0:0:1: Attached scsi generic sg3 type 13 [ 4000.084314] sd 6:0:0:0: [sdb] Spinning up diskready [ 4007.437353] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 4007.438495] sd 6:0:0:0: [sdb] Write Protect is off [ 4007.438507] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 4007.439344] sd 6:0:0:0: [sdb] No Caching mode page present [ 4007.439350] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4007.442529] sd 6:0:0:0: [sdb] No Caching mode page present [ 4007.442542] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4007.448249] sdb: sdb1 [ 4007.451711] sd 6:0:0:0: [sdb] No Caching mode page present [ 4007.451721] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4007.451730] sd 6:0:0:0: [sdb] Attached SCSI disk [ 4007.525713] ses 6:0:0:1: Attached Enclosure device [ 4498.171760] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 4800.796083] INFO: task mount:6196 blocked for more than 120 seconds. [ 4800.796087] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [ 4800.796090] mount D c1064b79 0 6196 6195 0x [ 4800.796096] edcfde08 0086 edcfddc4 c1064b79 f77cb3c0 f7108cb0 c18e13c0 c18e13c0 [ 4800.796105] e120fed1 043c f77cb3c0 f22c58d0 f2ce2610 0008 [ 4800.796113] edcfdde0 c1064c2f c18dce40 edc399b4 edc399b4 edcfdde0 c1027598 edcfddf4 [ 4800.796121] Call Trace: [ 4800.796131] [c1064b79] ? wait_on_cpu_work+0x89/0xb0 [ 4800.796135] [c1064c2f] ? wait_on_work+0x8f/0x100 [ 4800.796141] [c1027598] ? default_spin_lock_flags+0x8/0x10 [ 4800.796147] [c15748ad] ? _raw_spin_lock_irqsave+0x2d/0x40 [ 4800.796152] [c128b577] ? __disk_unblock_events+0x47/0xd0 [ 4800.796157] [c1572ca5] schedule+0x35/0x50 [ 4800.796160] [c15745bd] rwsem_down_failed_common+0x9d/0xf0 [ 4800.796164] [c1574622] rwsem_down_write_failed+0x12/0x20 [ 4800.796169] [c12a5492] call_rwsem_down_write_failed+0x6/0x8 [ 4800.796173] [c1573bd4] ? down_write+0x24/0x30 [ 4800.796178] [c11348b0] ? set_bdev_super+0x30/0x30 [ 4800.796181] [c11353db] sget+0xcb/0x1c0 [ 4800.796185] [c1134880] ? ns_test_super+0x20/0x20 [ 4800.796188] [c1135625] mount_bdev+0xb5/0x1d0 [ 4800.796193] [c11da3a0] ? ext4_calculate_overhead+0x190/0x190 [ 4800.796199] [c11c9f0f] ext4_mount+0x1f/0x30 [ 4800.796203] [c11da3a0] ? ext4_calculate_overhead+0x190/0x190 [ 4800.796206] [c11360b6] mount_fs+0x36/0x180 [ 4800.796210] [c110277f] ? __alloc_percpu+0xf/0x20 [ 4800.796214] [c114ce3e] ? alloc_vfsmnt+0xae/0x130 [ 4800.796218] [c114cf51] vfs_kern_mount+0x51/0xa0 [ 4800.796222] [c114e07e] do_kern_mount+0x3e/0xe0 [ 4800.796225] [c114f774] do_mount+0x164/0x200 [ 4800.796229] [c114fbab] sys_mount+0x6b/0xa0 [ 4800.796232] [c1574a54] syscall_call+0x7/0xb [ 4800.796236] [c157] ? powernow_decode_bios+0xaa/0x15f [ 4920.796113] INFO: task mount:6196 blocked for more than 120 seconds. [ 4920.796118] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [ 4920.796121] mount D c1064b79 0 6196 6195 0x [ 4920.796126] edcfde08 0086 edcfddc4 c1064b79 f77cb3c0 f7108cb0 c18e13c0 c18e13c0 [ 4920.796135] e120fed1 043c f77cb3c0 f22c58d0 f2ce2610 0008 [ 4920.796143] edcfdde0 c1064c2f c18dce40 edc399b4 edc399b4 edcfdde0 c1027598 edcfddf4 [ 4920.796151] Call Trace: [
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
** Also affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
Wait, nevermind the extended volume business, this is GPT, not MBR... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1238446 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
The ringbuffer spew here from the XFS driver when we attempt to mount something that's not an XFS partition is clearly a kernel bug, but there's likely also something we can do to make the installer a bit more robust in this situation. Note that the partition spewing the errors doesn't even contain a filesystem, it's the extended volume that then contains the extended partitions (like /dev/sda5, which is NTFS, not XFS). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
Parted crashes while trying to print the partition table: kubuntu@kubuntu:~$ sudo parted /dev/sda GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA M4-CT256M4SSD2 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Error during translation: Invalid or incomplete multibyte or wide character And when trying it for the live USB drive: kubuntu@kubuntu:~$ sudo parted /dev/sdb GNU Parted 2.3 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: Kingston DataTraveler 2.0 (scsi) Disk /dev/sdb: 7803MB Sector size (logical/physical): 512B/512B Partition Table: loop Number Start End SizeFile system Flags 1 0.00B 7803MB 7803MB fat32 (parted) quit -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
kubuntu@kubuntu:~$ cat /proc/partitions major minor #blocks name 70 941900 loop0 80 250059096 sda 81 266240 sda1 821638400 sda2 83 266240 sda3 84 131072 sda4 85 247755776 sda5 8 167620288 sdb -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] [NEW] Kernel panic on 3.8.0-29 when using ipvs
Public bug reported: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: apport.linux-image-3.8.0-29-generic.si1z_n.apport https://bugs.launchpad.net/bugs/1238494/+attachment/3873847/+files/apport.linux-image-3.8.0-29-generic.si1z_n.apport -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: New Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
So, sda4 *does* exist, and it's this: (270,99,21) (286,180,21)4 2224029696-2358247423 134217728 primary unknown /dev/sda4 Microsoft reserved partition -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
Note that if I start kde partition manager myself, there are no crashes, and it displays the partitions correctly on both the SSD and flash drive. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Incomplete Status in “ubiquity” package in Ubuntu: New Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1046806] Re: Network manager problems with downgrade and update
after updating to 13.04 the problem seems to have been fixed thankyou -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1046806 Title: Network manager problems with downgrade and update Status in “linux” package in Ubuntu: Expired Bug description: after i upgraded from ubuntu 11.10 to 12.04 i have problems with the network manager and connecting to a network then to fix the problem i had to do the following: please see link http://ubuntuforums.org/showthread.php?t=2001421 but after doing the above ( see link ) i get error broken count 0 this usually means that your installed packages have unmet dependencies . ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-29-generic 3.2.0-29.46 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: hackeridis 2571 F pulseaudio /dev/snd/controlC0: hackeridis 2571 F pulseaudio CRDA: country TW: (2402 - 2472 @ 40), (3, 27) (5270 - 5330 @ 40), (3, 17), DFS (5735 - 5815 @ 40), (3, 30) Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf0b0 irq 45' Mixer name : 'IDT 92HD73C1X5' Components : 'HDA:111d7675,10280413,00100103' Controls : 18 Simple ctrls : 11 Card1.Amixer.info: Card hw:1 'Generic'/'HD-Audio Generic at 0xcfedc000 irq 46' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Sep 6 15:00:38 2012 HibernationDevice: RESUME=UUID=be6c0607-ccf7-490e-9860-ae5ceda63215 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) MachineType: Dell Inc. Studio 1558 ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=32622501-3eec-459e-bb7b-1180f90f45b0 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-29-generic N/A linux-backports-modules-3.2.0-29-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/08/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.name: 0874P6 dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A03 dmi.modalias: dmi:bvnDellInc.:bvrA03:bd01/08/2010:svnDellInc.:pnStudio1558:pvrA03:rvnDellInc.:rn0874P6:rvrA03:cvnDellInc.:ct8:cvrA03: dmi.product.name: Studio 1558 dmi.product.version: A03 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1046806/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
** Attachment added: How it looks in KDE partition manager https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1238446/+attachment/3873848/+files/snapshot1.png ** Tags added: apport-collected kubuntu saucy ubiquity-2.15.20 ** Description changed: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). - There is no indication of error, the installer is just stuck with the - Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past - to install successfully on this laptop. + There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. + --- + ApportVersion: 2.12.4-0ubuntu1 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: kubuntu4659 F pulseaudio + CasperVersion: 1.336ubuntu1 + DistroRelease: Ubuntu 13.10 + InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- + LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) + MachineType: Sony Corporation SVS13A190X + MarkForUpload: True + Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] + PackageArchitecture: amd64 + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- + ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 + RelatedPackageVersions: + linux-restricted-modules-3.11.0-8-generic N/A + linux-backports-modules-3.11.0-8-generic N/A + linux-firmware1.114 + Tags: saucy saucy ubiquity-2.15.20 kubuntu + Uname: Linux 3.11.0-8-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + dmi.bios.date: 08/22/2012 + dmi.bios.vendor: Insyde Corp. + dmi.bios.version: R0143C5 + dmi.board.asset.tag: N/A + dmi.board.name: VAIO + dmi.board.vendor: Sony Corporation + dmi.board.version: N/A + dmi.chassis.asset.tag: N/A + dmi.chassis.type: 10 + dmi.chassis.vendor: Sony Corporation + dmi.chassis.version: N/A + dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: + dmi.product.name: SVS13A190X + dmi.product.version: C60AL06C + dmi.sys.vendor: Sony Corporation -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor:
[Kernel-packages] [Bug 1238446] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873860/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] AlsaInfo.txt
apport information ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873859/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873865/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873867/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] UbiquityDebug.txt
apport information ** Attachment added: UbiquityDebug.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873875/+files/UbiquityDebug.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Dependencies.txt
apport information ** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873864/+files/Dependencies.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] RfKill.txt
apport information ** Attachment added: RfKill.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873873/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873861/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] PulseList.txt
apport information ** Attachment added: PulseList.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873872/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Casper.txt
apport information ** Attachment added: Casper.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873862/+files/Casper.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873871/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873866/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873888/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873891/+files/WifiSyslog.txt ** Changed in: ubiquity (Ubuntu) Status: New = Confirmed ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1220205] Re: CVE-2013-2897
** Description changed: Multiple array index errors in drivers/hid/hid-multitouch.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_MULTITOUCH is enabled, allow physically proximate attackers to cause a denial of service (heap memory corruption, or NULL pointer dereference and OOPS) via a crafted device. - Break-Fix: - 8821f5dc187bdf16cfb32ef5aa8c3035273fa79a + Break-Fix: 5519cab477b61326963c8d523520db0342862b63 8821f5dc187bdf16cfb32ef5aa8c3035273fa79a Break-Fix: - cc6b54aa54bf40b762cab45a9fc8aa81653146eb -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1220205 Title: CVE-2013-2897 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: New Status in “linux-lts-backport-natty” package in Ubuntu: New Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: New Status in “linux” source package in Lucid: New Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: New Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: New Status in “linux-lts-backport-natty” source package in Lucid: New Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: New Status in “linux-armadaxp” source package in Precise: New Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: New Status in “linux-lts-backport-natty” source package in Precise: New Status in “linux-lts-quantal” source package in Precise: New Status in “linux-lts-raring” source package in Precise: New Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: New Status in “linux” source package in Quantal: New Status in “linux-armadaxp” source package in Quantal: New Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: New Status in “linux-lts-backport-natty” source package in Quantal: New Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: New Status in “linux” source package in Raring: New Status in “linux-armadaxp” source package in Raring: Invalid Status in “linux-ec2” source package in Raring: Invalid Status in “linux-fsl-imx51” source package in Raring: Invalid Status in “linux-lts-backport-maverick” source package in Raring: New Status in “linux-lts-backport-natty” source package in Raring: New Status in “linux-lts-quantal” source package in Raring: Invalid Status in “linux-lts-raring” source package in Raring: Invalid Status in “linux-mvl-dove” source package in Raring: Invalid Status in “linux-ti-omap4” source package in Raring: New Status in “linux” source package in Saucy: Invalid Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: New Status in “linux-lts-backport-natty” source package in Saucy: New Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: New Bug description: Multiple array index errors in drivers/hid/hid-multitouch.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_MULTITOUCH is enabled, allow physically proximate attackers to cause a denial of service (heap memory corruption, or NULL pointer dereference and OOPS) via a crafted device. Break-Fix: 5519cab477b61326963c8d523520db0342862b63 8821f5dc187bdf16cfb32ef5aa8c3035273fa79a Break-Fix: - cc6b54aa54bf40b762cab45a9fc8aa81653146eb To manage
[Kernel-packages] [Bug 1238446] UbiquityDm.txt
apport information ** Attachment added: UbiquityDm.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873877/+files/UbiquityDm.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873884/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] ProcEnviron.txt
apport information ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873869/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1238446/+attachment/3873863/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1238494 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Incomplete Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1199345] Re: Can't install on Hyper-V Server 2008 R2 SP1 (error video)
Thanks, but desctop option was necessary to me and I think to remaining users too. I will worry, but the problem can have mass character and at least looks very strange from all directions. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1199345 Title: Can't install on Hyper-V Server 2008 R2 SP1 (error video) Status in The Linux Kernel: New Status in “linux” package in Ubuntu: Confirmed Bug description: Microsoft Hyper-V Server 2008 R2 SP 1. Installing daily build 13.10 01.07.2013, 08.07.2013 and 09.07.2013. Have small resolution and error video in attach. --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-30-generic N/A linux-backports-modules-3.8.0-30-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-30-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 1629-5805-2812-2971-2285-8339-49 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr090004:bd03/19/2009:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0: dmi.product.name: Virtual Machine dmi.product.version: 7.0 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-30-generic N/A linux-backports-modules-3.8.0-30-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-30-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 1629-5805-2812-2971-2285-8339-49 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias:
[Kernel-packages] [Bug 1238494] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873978/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] Re: Kernel panic on 3.8.0-29 when using ipvs
apport information ** Tags added: apport-collected raring ** Description changed: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed + --- + AlsaDevices: + total 0 + crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq + crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer + AplayDevices: Error: [Errno 2] No such file or directory + ApportVersion: 2.9.2-0ubuntu8.3 + Architecture: amd64 + ArecordDevices: Error: [Errno 2] No such file or directory + AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: + CRDA: Error: [Errno 2] No such file or directory + DistroRelease: Ubuntu 13.04 + HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 + InstallationDate: Installed on 2012-12-03 (311 days ago) + InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) + IwConfig: + eth0 no wireless extensions. + + lono wireless extensions. + Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 + MachineType: VMware, Inc. VMware Virtual Platform + MarkForUpload: True + Package: linux (not installed) + PciMultimedia: + + ProcFB: + + ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro + ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 + RelatedPackageVersions: + linux-restricted-modules-3.8.0-31-generic N/A + linux-backports-modules-3.8.0-31-generic N/A + linux-firmware1.106 + RfKill: Error: [Errno 2] No such file or directory + Tags: raring + Uname: Linux 3.8.0-31-generic x86_64 + UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + dmi.bios.date: 06/22/2012 + dmi.bios.vendor: Phoenix Technologies LTD + dmi.bios.version: 6.00 + dmi.board.name: 440BX Desktop Reference Platform + dmi.board.vendor: Intel Corporation + dmi.board.version: None + dmi.chassis.asset.tag: No Asset Tag + dmi.chassis.type: 1 + dmi.chassis.vendor: No Enclosure + dmi.chassis.version: N/A + dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: + dmi.product.name: VMware Virtual Platform + dmi.product.version: None + dmi.sys.vendor: VMware, Inc. ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873969/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu
[Kernel-packages] [Bug 1238494] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873979/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873980/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873974/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873973/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873976/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238494] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1238494/+attachment/3873977/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238494 Title: Kernel panic on 3.8.0-29 when using ipvs Status in “linux” package in Ubuntu: Confirmed Bug description: In kernel 3.8.0-29 and higher (I've tested 3.8.0-30 and 3.8.0-31), the kernel panics when adding IPVS service. Specifically, when I execute the following command: sudo ipvsadm -A -u 10.0.50.4:53 The kernel immediately panics. I've reverted the kernel to 3.8.0-27, and IPVS executes without a problem. The panic is completely reproducable, using a clean install, no extra packages installed, all packages upgraded. I've attached the apport report of the system running 3.8.0-29. Best, Luc van Donkersgoed --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Oct 11 10:04 seq crw-rw---T 1 root audio 116, 33 Oct 11 10:04 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=566497ef-0abf-42f0-85ee-988bf9ba2034 InstallationDate: Installed on 2012-12-03 (311 days ago) InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 (20120424.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-31-generic root=/dev/mapper/dnslb01-root ro ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-31-generic N/A linux-backports-modules-3.8.0-31-generic N/A linux-firmware1.106 RfKill: Error: [Errno 2] No such file or directory Tags: raring Uname: Linux 3.8.0-31-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-10-10 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 06/22/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238494/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1056390] Re: [GIGABYTE T1005] suspend/resume failure
Unfortunately this laptop of mine is broken, so I am unable to follow up on this. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1056390 Title: [GIGABYTE T1005] suspend/resume failure Status in “linux” package in Ubuntu: Expired Bug description: N/A ProblemType: KernelOops DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-15-generic 3.5.0-15.23 ProcVersionSignature: Ubuntu 3.5.0-15.22-generic 3.5.4 Uname: Linux 3.5.0-15-generic i686 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.5.2-0ubuntu4 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marius 5062 F pulseaudio CRDA: country NO: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Date: Mon Sep 24 21:18:22 2012 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=49e028f9-7435-4850-8244-8523020782de InterpreterPath: /usr/bin/python3.2mu MachineType: GIGABYTE T1005 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-15-generic root=UUID=f1d0446d-3ea3-46a7-9842-8773acca78e6 ro crashkernel=384M-2G:64M,2G-:128M quiet PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.5.0-15-generic N/A linux-backports-modules-3.5.0-15-generic N/A linux-firmware1.94 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [GIGABYTE T1005] suspend/resume failure UpgradeStatus: Upgraded to quantal on 2012-08-31 (25 days ago) UserGroups: dmi.bios.date: 08/30/2010 dmi.bios.vendor: GIGABYTE dmi.bios.version: GSBF05 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: T1005 dmi.board.vendor: GIGABYTE dmi.board.version: Base Board Version dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnGIGABYTE:bvrGSBF05:bd08/30/2010:svnGIGABYTE:pnT1005:pvrGSBF05:rvnGIGABYTE:rnT1005:rvrBaseBoardVersion:cvnChassisManufacturer:ct1:cvrChassisVersion: dmi.product.name: T1005 dmi.product.version: GSBF05 dmi.sys.vendor: GIGABYTE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1056390/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
kubuntu@kubuntu:~$ sudo mount /dev/sda1 /mnt/tmp/ -o ro kubuntu@kubuntu:~$ sudo blkid /dev/sda3 /dev/sda3: UUID=F88C-9896 TYPE=vfat kubuntu@kubuntu:~$ ls /mnt/tmp/ EFI kubuntu@kubuntu:~$ ls /mnt/tmp/EFI/ boot microsoft kubuntu@kubuntu:~$ sudo umount /mnt/tmp kubuntu@kubuntu:~$ sudo mount /dev/sda3 /mnt/tmp/ -o ro kubuntu@kubuntu:~$ ls /mnt/tmp/ BOOTSECT.BAK EFI kubuntu@kubuntu:~$ ls /mnt/tmp/EFI/ Boot Microsoft Both sda1, sda3 look like EFI System Partitions, though it's impossible. I think sda1 is ESP for sda2 recovery OS, and sda3 is ESP for sda4/sda5 windows OS, and if I power my laptop using assist button, the recovery ESP kicks in and starts the recovery OS (which is windows recovery mode). If I power on using the power button, windows starts as usual. kubuntu@kubuntu:~$ sudo parted -l Model: ATA M4-CT256M4SSD2 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Error during translation: Invalid or incomplete multibyte or wide character -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
We can read partitions, and parted_server is printing them to us. We should ignore errors from multi-wide characters, and well continue to be able to install. It is curious how come KDE Partition Manager decodes the labels correctly and why parted / parted_server fails to do the same for us. ** Also affects: parted (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “parted” package in Ubuntu: New Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1237051] Re: Centrino Wireless-N 2230: 802.11n not working
Tagged kernel-bug-exists-upstream. uname -a: Linux zeno 3.12.0-031200rc4-generic #201310080738 SMP Tue Oct 8 11:40:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux iwconfig: wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off 802.11n networks not showing. ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1237051 Title: Centrino Wireless-N 2230: 802.11n not working Status in “linux” package in Ubuntu: Confirmed Bug description: 802.11n networks don't show up in the network manager. Side note: With N-band enabled, i see a lot of Tx excessive retries. When i disable N-band functionality, this is fixed and i get a lot more kB/s from it. That's why I currently have N-band disabled explicitly in /etc/modprobe.d/iwlwifi.conf. Originally posted at http://ubuntuforums.org/showthread.php?t=2178477. I'm assuming ubuntu-bug will have attached all possibly relevant files, so i won't repeat all my guessing here. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-23-generic 3.8.0-23.34 ProcVersionSignature: Ubuntu 3.8.0-23.34-generic 3.8.11 Uname: Linux 3.8.0-23-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kees 2139 F pulseaudio Date: Tue Oct 8 22:12:47 2013 HibernationDevice: RESUME=UUID=16c6232f-9aca-4c99-80bc-86f1705fdf0b InstallationDate: Installed on 2013-01-17 (264 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: LENOVO 33643EG MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb 1 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-23-generic root=UUID=6278fb6c-cd42-4010-a8a3-16aa39c1682a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-23-generic N/A linux-backports-modules-3.8.0-23-generic N/A linux-firmware1.106 SourcePackage: linux UpgradeStatus: Upgraded to raring on 2013-04-25 (166 days ago) dmi.bios.date: 06/13/2012 dmi.bios.vendor: LENOVO dmi.bios.version: GAET34WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 33643EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGAET34WW(1.11):bd06/13/2012:svnLENOVO:pn33643EG:pvrThinkPadEdgeS430:rvnLENOVO:rn33643EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 33643EG dmi.product.version: ThinkPad Edge S430 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237051/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1227093] Re: [haswell sony vaio pro] Internal microphone not working
Ok, so the mic patch was just merged with cc to 3.11 stable, so it's likely to be fixed in an SRU or two (should show up by a robot comment in this bug when it happens). Until then, you can use https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS (starting tomorrow probably, as it needs to go through a few systems first). As for the headset mic, I have no further ideas at the moment. If someone has a CTIA headset nearby, it would be worth testing that. ** Changed in: linux (Ubuntu) Status: Confirmed = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1227093 Title: [haswell sony vaio pro] Internal microphone not working Status in “linux” package in Ubuntu: Fix Committed Bug description: The internal microphone is not working on a new sony vaio pro with ubuntu 13.10 kernel. I've also tried latest mainline kernel v3.11-rc7. FYI, this laptop does not boot pre-saucy kernels. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 ApportVersion: 2.12.1-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: francois 1951 F pulseaudio /dev/snd/controlC1: francois 1951 F pulseaudio Date: Wed Sep 18 14:00:59 2013 HibernationDevice: RESUME=UUID=336e37fb-47a2-406c-ad64-630659d38f70 InstallationDate: Installed on 2013-07-30 (49 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130729) MachineType: Sony Corporation SVP1321C5E MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic root=UUID=fe28f457-7a8a-4185-866b-115aded2e40c ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/17/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R0270V7 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR0270V7:bd05/17/2013:svnSonyCorporation:pnSVP1321C5E:pvrC60C1VKQ:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVP1321C5E dmi.product.version: C60C1VKQ dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227093/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
** Attachment added: Output of strace parted -l as root on Kubuntu 13.04 livecd https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1238446/+attachment/3874044/+files/partedstrace -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “linux” package in Ubuntu: Confirmed Status in “parted” package in Ubuntu: New Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1235649] Re: uevent spam causes libdbus client code in session upstart to consume massive amounts of memory on Ubuntu Touch
Note that the following call on the server side does not resolve the issue: while (dbus_connection_dispatch (connection) == DBUS_DISPATCH_DATA_REMAINS) ; -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1235649 Title: uevent spam causes libdbus client code in session upstart to consume massive amounts of memory on Ubuntu Touch Status in Upstart: New Status in “linux” package in Ubuntu: Invalid Status in “systemd” package in Ubuntu: New Status in “unity” package in Ubuntu: New Status in “upstart” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Invalid Status in “systemd” source package in Saucy: New Status in “unity” source package in Saucy: New Status in “upstart” source package in Saucy: Fix Released Bug description: using ubuntu touch image 82 i see the session init consume about 10MB per minute as long as the screen is on with Mir. running the same session with surfaceflinger only consumes 1MB per minute. in both cases the system starts to swap heavily at some point, making the UI unresponsive. http://paste.ubuntu.com/6196223/ has the top output of a Mir session after 30min, the UI just got completely unresponsive when this snapshot was taken. http://paste.ubuntu.com/6196332/ is the top output of a surfaceflinger session where the screen was off for about 10min apparently the leak only occurs while the screen is on, it seems to be permanently there but in the case of surfaceflinger it hits less hard. To manage notifications about this bug go to: https://bugs.launchpad.net/upstart/+bug/1235649/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 270017] Re: ACPI: EC: GPE storm detected, disabling EC GPE
I get this message in Ubuntu 13.10 daily release Oct 11 20:14:54 nanak-P570WM kernel: [ 945.458761] ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode Oct 11 20:17:01 nanak-P570WM CRON[4228]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/270017 Title: ACPI: EC: GPE storm detected, disabling EC GPE Status in Linux ACPI client: Fix Released Status in “linux” package in Ubuntu: Fix Released Bug description: ACPI: EC: GPE storm detected, disabling EC GPE My computer is Microstar EX600, and I installed ubuntu8.10 and same problem. To manage notifications about this bug go to: https://bugs.launchpad.net/acpi/+bug/270017/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 890592] Re: CD drive eject button does not work
Hello. I can also confirm this on ubuntu 13.10. When I put in a dvd (The Avengers for example) it is mounted as - /media/ukbeast/MARVELS_THE_AVENGERS when I press eject on my ata-Slimtype_DVD_A_DS8A8SH_3208583_632219412703 dvd ejects but the dvd is still mounted as /media/ukbeast/MARVELS_THE_AVENGERS. I find it annoying because I use leawo bluray player for my dvds using wine beacuse the sound seems better than VLC and I have to close and open the software to unmount the dvd in nautilus, so that wine can pass the mount information to leawo. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/890592 Title: CD drive eject button does not work Status in Nautilus: Unknown Status in “linux” package in Ubuntu: Confirmed Status in “udev” package in Ubuntu: Fix Released Bug description: PROBLEM On my laptop, pressing the hardware eject button on the DVD drive will pop out the disc, but it will still be treated as mounted by Nautilus. If I then put in another disc, it will still think that the files from the previous disc are there, as though it had not been ejected. This produces an error when I try to manipulate those files. I can't access the files from the new disc until I eject the old one using the button on Nautilus. HOW TO REPRODUCE 1. Put a CD or DVD in the drive, close it, and let Nautilus mount it. 2. Eject it using the hardware eject key. 3. Put in a new CD or DVD. EXPECTED BEHAVIOR Nautilus will know when I ejected a disc. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: nautilus 1:3.2.1-0ubuntu2 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic i686 ApportVersion: 1.23-0ubuntu4 Architecture: i386 Date: Tue Nov 15 03:58:34 2011 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/890592/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1204369] Re: Bluetooth keyboard and trackpad freezing and sticking since 13.04 Raring upgrade
I've just managed to get a chance to test this. Instead of installing the dev ISO I just upgraded using do-release-upgrade -d. I've been testing for a couple of hours and have not experienced the issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1204369 Title: Bluetooth keyboard and trackpad freezing and sticking since 13.04 Raring upgrade Status in “linux” package in Ubuntu: Incomplete Bug description: Hi there, I recently upgraded my mid-2011 Mac Mini (aka Macmini5,1) to Ubuntu 13.04 Raring from 12.10. Since then I've been experiencing frequent freezes on my bluetooth keyboard and trackpad. By freezes I mean this: If I'm typing, keys will occasionally stick or briefly not respond. My trackpad is the same, except that the touch/click inputs will be stuck on, meaning that single-finger clicks will be interpreted as two-finger (right) clicks and the trackpad will not move. I can only recccover from this situation by wildly tapping and clicking the trackpad. The freezes happen at random intervals, so I don't think it's a result of any kind of regular timeout. But frequently enough that on average they happen every few minutes. They don't last long (the above were genuine examples of briefly stuck keys) so my suspicion is that it's some kind of temporary bluetooth dropout/reconnection. I don't see any lights flashing on my keyboard or trackpad, which usually happens in the event of a full disconnection. The only relevant log messages I can see are a bunch of these in syslog and kern.log: kernel: [487681.166937] power_supply hid-90:84:0d:fd:c9:e5-battery: driver failed to report `capacity' property: -5 Which I suspect is a red herring. It's definitely not a hardware issue, as this wasn't happening with the exact same hardware setup prior to my 13.04 upgrade. The machine has since been moved from my office to my house, so I don't think there's any environmental/wireless interference factors at play. I've replaced the batteries as well. Let me know if there's any other information I can give that might help you track down this bug. It is super irritating so I am very motivated to help. I can probably get access to a usb bluetooth dongle if that would be useful in isolating whether it's a problem specific to the Mac Mini's bluetooth controller. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-26-generic 3.8.0-26.38 ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2 Uname: Linux 3.8.0-26-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: samg 5655 F pulseaudio Date: Wed Jul 24 15:56:36 2013 HibernationDevice: RESUME=UUID=19d01878-e65b-4948-ba0b-94e44ff826d0 InstallationDate: Installed on 2012-11-14 (252 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Apple Inc. Macmini5,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-26-generic root=UUID=cf067d4c-850c-40fa-a333-ecc5f8d81b08 ro rootdelay=120 RelatedPackageVersions: linux-restricted-modules-3.8.0-26-generic N/A linux-backports-modules-3.8.0-26-generic N/A linux-firmware1.106 SourcePackage: linux UpgradeStatus: Upgraded to raring on 2013-06-06 (47 days ago) dmi.bios.date: 01/24/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MM51.88Z.0077.B10.1201241549 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-8ED6AF5B48C039E1 dmi.board.vendor: Apple Inc. dmi.board.version: Macmini5,1 dmi.chassis.type: 16 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-8ED6AF5B48C039E1 dmi.modalias: dmi:bvnAppleInc.:bvrMM51.88Z.0077.B10.1201241549:bd01/24/2012:svnAppleInc.:pnMacmini5,1:pvr1.0:rvnAppleInc.:rnMac-8ED6AF5B48C039E1:rvrMacmini5,1:cvnAppleInc.:ct16:cvrMac-8ED6AF5B48C039E1: dmi.product.name: Macmini5,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1204369/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1227093] Re: [haswell sony vaio pro] Internal microphone not working
I've just realised I do have a headset :) The handsfree headset from my mobile! How can I tell if it's CTIA or OMTP? It shows up in the sound settings as Headset Microphone and it works! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1227093 Title: [haswell sony vaio pro] Internal microphone not working Status in “linux” package in Ubuntu: Fix Committed Bug description: The internal microphone is not working on a new sony vaio pro with ubuntu 13.10 kernel. I've also tried latest mainline kernel v3.11-rc7. FYI, this laptop does not boot pre-saucy kernels. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 ApportVersion: 2.12.1-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: francois 1951 F pulseaudio /dev/snd/controlC1: francois 1951 F pulseaudio Date: Wed Sep 18 14:00:59 2013 HibernationDevice: RESUME=UUID=336e37fb-47a2-406c-ad64-630659d38f70 InstallationDate: Installed on 2013-07-30 (49 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130729) MachineType: Sony Corporation SVP1321C5E MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic root=UUID=fe28f457-7a8a-4185-866b-115aded2e40c ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/17/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R0270V7 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR0270V7:bd05/17/2013:svnSonyCorporation:pnSVP1321C5E:pvrC60C1VKQ:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVP1321C5E dmi.product.version: C60C1VKQ dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227093/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1236999] Re: linux: 3.11.0-12.18 -proposed tracker
** Changed in: kernel-development-workflow/promote-to-release Status: New = Fix Released ** Changed in: kernel-development-workflow/promote-to-release Assignee: Ubuntu Package Archive Administrators (ubuntu-archive) = Adam Conrad (adconrad) ** Changed in: kernel-development-workflow/prepare-package-signed Status: New = Fix Released ** Changed in: kernel-development-workflow/prepare-package Status: New = Fix Released ** Changed in: kernel-development-workflow/package-testing Status: New = Fix Released ** Changed in: kernel-development-workflow Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1236999 Title: linux: 3.11.0-12.18 -proposed tracker Status in Kernel Development Workflow: Fix Released Status in Kernel Development Workflow package-testing series: Fix Released Status in Kernel Development Workflow prepare-package series: Fix Released Status in Kernel Development Workflow prepare-package-meta series: Fix Released Status in Kernel Development Workflow prepare-package-signed series: Fix Released Status in Kernel Development Workflow promote-to-release series: Fix Released Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Released Bug description: This bug is for tracking the 3.11.0-12.18 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-Prepare-package-start:Tuesday, 08. October 2013 18:41 UTC kernel-phase-changed:Tuesday, 08. October 2013 18:41 UTC kernel-phase:Prepare To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-development-workflow/+bug/1236999/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1067079] Re: 0546:3304 [Dell Studio XPS 8100] Unable to connect Hedcamz HEDCAM HD video cameras via USB
I have contacted the owner of Hedcamz to ask if he can respond to your last request for information, Christopher. I'd appreciate it if you would keep the ticket open until the bug is actually resolved. Thank you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1067079 Title: 0546:3304 [Dell Studio XPS 8100] Unable to connect Hedcamz HEDCAM HD video cameras via USB Status in “linux” package in Ubuntu: Expired Bug description: Recently-installed Ubuntu 12.04 system with all the latest updates. - Expected - This issue relates to following product: Bus 002 Device 015: ID 0546:3304 Polaroid Corp. a500 Digital Camera HEDCAM HD WIDE Waterproof Wearable Camcorder http://www.hedcamz.com/cameras/hedcam/hedcam-wide When this device is connected via USB, Ubuntu should automatically recognise it and, ideally, automatically mount the removable MicroSD storage media (4GB). This allows the user to manage the videos created using the device. - Results - Communication with the device is not successful, and the following errors are logged to /var/log/syslog. Oct 15 21:35:27 shatner kernel: [26968.170620] hub 2-1:1.0: unable to enumerate USB device on port 5 Oct 15 21:35:28 shatner kernel: [26968.426177] hub 2-1:1.0: unable to enumerate USB device on port 5 Oct 15 21:35:29 shatner kernel: [26969.504032] usb 2-1.5: new high-speed USB device number 6 using ehci_hcd Oct 15 21:35:29 shatner kernel: [26969.598510] scsi5 : usb-storage 2-1.5:1.0 Oct 15 21:35:29 shatner mtp-probe: checking bus 2, device 6: /sys/devices/pci:00/:00:1d.0/usb2/2-1/2-1.5 Oct 15 21:35:29 shatner mtp-probe: bus: 2, device: 6 was not an MTP device Oct 15 21:35:30 shatner kernel: [26970.705579] scsi 5:0:0:0: Direct-Access Digital Camera Storage 1.00 PQ: 0 ANSI: 5 Oct 15 21:35:30 shatner kernel: [26970.707733] sd 5:0:0:0: Attached scsi generic sg7 type 0 Oct 15 21:35:30 shatner kernel: [26970.709728] sd 5:0:0:0: [sdg] 7841792 512-byte logical blocks: (4.01 GB/3.73 GiB) Oct 15 21:35:30 shatner kernel: [26970.711464] sd 5:0:0:0: [sdg] Write Protect is off Oct 15 21:35:30 shatner kernel: [26970.711474] sd 5:0:0:0: [sdg] Mode Sense: 17 00 00 08 Oct 15 21:35:30 shatner kernel: [26970.712041] sd 5:0:0:0: [sdg] No Caching mode page present Oct 15 21:35:30 shatner kernel: [26970.712046] sd 5:0:0:0: [sdg] Assuming drive cache: write through Oct 15 21:35:30 shatner kernel: [26970.714869] sd 5:0:0:0: [sdg] No Caching mode page present Oct 15 21:35:30 shatner kernel: [26970.714875] sd 5:0:0:0: [sdg] Assuming drive cache: write through Oct 15 21:35:30 shatner kernel: [26970.716578] sdg: sdg1 Oct 15 21:35:30 shatner kernel: [26970.719667] sd 5:0:0:0: [sdg] No Caching mode page present Oct 15 21:35:30 shatner kernel: [26970.719672] sd 5:0:0:0: [sdg] Assuming drive cache: write through Oct 15 21:35:30 shatner kernel: [26970.719677] sd 5:0:0:0: [sdg] Attached SCSI removable disk Oct 15 21:35:30 shatner kernel: [26970.743051] sd 5:0:0:0: [sdg] Unhandled sense code Oct 15 21:35:30 shatner kernel: [26970.743056] sd 5:0:0:0: [sdg] Result: hostbyte=invalid driverbyte=DRIVER_SENSE Oct 15 21:35:30 shatner kernel: [26970.743062] sd 5:0:0:0: [sdg] Sense Key : Medium Error [current] Oct 15 21:35:30 shatner kernel: [26970.743069] sd 5:0:0:0: [sdg] Add. Sense: Unrecovered read error Oct 15 21:35:30 shatner kernel: [26970.743075] sd 5:0:0:0: [sdg] CDB: Read(10): 28 00 00 77 a7 f0 00 00 08 00 Oct 15 21:35:30 shatner kernel: [26970.743088] end_request: critical target error, dev sdg, sector 7841776 Oct 15 21:35:30 shatner kernel: [26970.743094] Buffer I/O error on device sdg, logical block 980222 There is another open ticket, Bug #913567, appears to be the same issue. See the followig user comments, that mention the same manufacturer. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913567/comments/2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913567/comments/5 ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-32-generic 3.2.0-32.51 ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30 Uname: Linux 3.2.0-32-generic x86_64 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu13 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D7p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf7ff8000 irq 46' Mixer name : 'Intel IbexPeak HDMI' Components :
[Kernel-packages] [Bug 1238596] [NEW] Peripherals trough Dell E-port port replicator not recognized
Public bug reported: Since I have upgraded my Kernel to 3.8.0-30.44, peripherals (DVI-D Display, USB Mouse, USB Keyboard) connected trough the E-port port replicator are no more recognized by the system and doesn't work anymore. If I revert the kernel to 3.8.0-25.37, the problem disappear. I use Ubuntu 13.04. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: logs on a running system (3.8.0.25.37) https://bugs.launchpad.net/bugs/1238596/+attachment/3874217/+files/running.log.zip -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1238596 Title: Peripherals trough Dell E-port port replicator not recognized Status in “linux” package in Ubuntu: New Bug description: Since I have upgraded my Kernel to 3.8.0-30.44, peripherals (DVI-D Display, USB Mouse, USB Keyboard) connected trough the E-port port replicator are no more recognized by the system and doesn't work anymore. If I revert the kernel to 3.8.0-25.37, the problem disappear. I use Ubuntu 13.04. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238596/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238596] Re: Peripherals trough Dell E-port port replicator not recognized
** Package changed: linux-meta (Ubuntu) = linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238596 Title: Peripherals trough Dell E-port port replicator not recognized Status in “linux” package in Ubuntu: New Bug description: Since I have upgraded my Kernel to 3.8.0-30.44, peripherals (DVI-D Display, USB Mouse, USB Keyboard) connected trough the E-port port replicator are no more recognized by the system and doesn't work anymore. If I revert the kernel to 3.8.0-25.37, the problem disappear. I use Ubuntu 13.04. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238596/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 524893] Re: versatile: Can't boot initramfses
** Changed in: android (Ubuntu) Status: Triaged = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/524893 Title: versatile: Can't boot initramfses Status in “android” package in Ubuntu: Fix Released Status in “linux” package in Ubuntu: Fix Released Status in “qemu-kvm” package in Ubuntu: Fix Released Status in “android” source package in Lucid: Won't Fix Status in “linux” source package in Lucid: Fix Released Status in “qemu-kvm” source package in Lucid: Fix Released Bug description: Hi On versatile, I can't boot initramfses: [1.838592] Trying to unpack rootfs image as initramfs... [1.846490] rootfs image is not initramfs (junk in compressed archive); looks like an initrd [...] [5.245581] RAMDISK: Couldn't find valid RAM disk image starting at 0. [...] [5.271581] No filesystem could mount root, tried: ext3 ext2 ext4 fuseblk There are two distinct problems: - for an unknown reason, the initramfs code can't open the initramfs; this is under qemu, so perhaps a qemu bug? - the initrd code can't open the initramfs either because CONFIG_CRAMFS=m and not =y Also, the RAMDISK_SIZE is a bit small for our initrds which are 11 MBs unpacked or so. I'd appreciate some help in figuring out the first issue, but in any case we should set the other two configs. Thanks, To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/android/+bug/524893/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238188] Re: no desktop effects on a radeon 3100 graphics card in saucy
apport information ** Tags added: apport-collected ** Description changed: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) + --- + ApportVersion: 2.12.5-0ubuntu1 + Architecture: i386 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: hp 2266 F pulseaudio + CurrentDmesg: + Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied + dmesg: write failed: Broken pipe + DistroRelease: Ubuntu 13.10 + InstallationDate: Installed on 2012-02-02 (616 days ago) + InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) + IwConfig: + tap0 no wireless extensions. + + lono wireless extensions. + + eth0 no wireless extensions. + MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor + MarkForUpload: True + Package: linux (not installed) + ProcFB: 0 radeondrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 + RfKill: + + Tags: saucy + Uname: Linux 3.11.0-12-generic i686 + UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) + UserGroups: admin cdrom dialout lpadmin plugdev sambashare + WifiSyslog: + + dmi.bios.date: 10/26/2009 + dmi.bios.vendor: Hewlett-Packard + dmi.bios.version: 786F6 v03.10 + dmi.board.name: 3029h + dmi.board.vendor: Hewlett-Packard + dmi.chassis.asset.tag: CZC84019NW + dmi.chassis.type: 4 + dmi.chassis.vendor: Hewlett-Packard + dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: + dmi.product.name: HP Compaq dc5850 Small Form Factor + dmi.sys.vendor: Hewlett-Packard ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874415/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash
[Kernel-packages] [Bug 1238188] HookError_source_linux.txt
apport information ** Attachment added: HookError_source_linux.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874417/+files/HookError_source_linux.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874416/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1238188/+attachment/387/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874443/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874438/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874442/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] AlsaInfo.txt
apport information ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874437/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874441/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874439/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] PulseList.txt
apport information ** Attachment added: PulseList.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874424/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874448/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874426/+files/UdevLog.txt ** Description changed: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard + --- + ApportVersion: 2.12.5-0ubuntu1 + Architecture: i386 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: hp 2266 F pulseaudio + DistroRelease: Ubuntu 13.10 + HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 + InstallationDate: Installed on 2012-02-02 (616 days ago) + InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) + IwConfig: + tap0 no wireless extensions. + + lono wireless extensions. + + eth0 no wireless extensions. + MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor + MarkForUpload: True + Package: linux (not installed) + ProcEnviron: + LANGUAGE=en_GB + TERM=xterm + PATH=(custom, no user) + LANG=en_GB.UTF-8 + SHELL=/bin/bash + ProcFB: 0 radeondrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 + PulseList: + Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied + No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-3.11.0-12-generic N/A + linux-backports-modules-3.11.0-12-generic N/A + linux-firmware 1.116 + RfKill: + + Tags: saucy + Uname: Linux 3.11.0-12-generic i686 + UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) + UserGroups: + + dmi.bios.date: 10/26/2009 + dmi.bios.vendor: Hewlett-Packard + dmi.bios.version: 786F6 v03.10 + dmi.board.name: 3029h + dmi.board.vendor: Hewlett-Packard + dmi.chassis.asset.tag: CZC84019NW + dmi.chassis.type: 4 + dmi.chassis.vendor: Hewlett-Packard + dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: + dmi.product.name: HP Compaq dc5850 Small Form Factor + dmi.sys.vendor: Hewlett-Packard -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu.
[Kernel-packages] [Bug 1238188] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874447/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874420/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1238188] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874440/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1236766] Re: [Acer Aspire One 721] suspend/resume failure
** Tags added: kernel-unable-to-test-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1236766 Title: [Acer Aspire One 721] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: I restartet my Laptop because of a crash of wpasupplicant: After suspend neither wifi nor any other network connection works. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-11-generic 3.11.0-11.17 ProcVersionSignature: Ubuntu 3.11.0-11.17-generic 3.11.3 Uname: Linux 3.11.0-11-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: nuk2295 F pulseaudio /dev/snd/controlC0: nuk2295 F pulseaudio Date: Sun Oct 6 18:52:15 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=1b89ecbd-31ef-4b1d-8995-101d7921e6a7 InstallationDate: Installed on 2012-09-09 (393 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Alpha amd64 (20120905.2) InterpreterPath: /usr/bin/python3.3 MachineType: Acer Aspire One 721 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-11-generic root=UUID=ba7ab6ea-f613-4c07-841d-3cdbf54fb0f5 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-11-generic N/A linux-backports-modules-3.11.0-11-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [Acer Aspire One 721] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-28 (9 days ago) UserGroups: dmi.bios.date: 04/25/2011 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.18 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire One 721 dmi.board.vendor: Acer dmi.board.version: V1.18 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.18 dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.18:bd04/25/2011:svnAcer:pnAspireOne721:pvrV1.18:rvnAcer:rnAspireOne721:rvrV1.18:cvnAcer:ct10:cvrV1.18: dmi.product.name: Aspire One 721 dmi.product.version: V1.18 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1236766/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238658] Re: rsync between two btrfs filesystems causes machines to crash with symptoms of memory leak
Now running mainline kernel (3.12.0-999-generic #201310090426) and restest -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238658 Title: rsync between two btrfs filesystems causes machines to crash with symptoms of memory leak Status in “linux” package in Ubuntu: New Bug description: Using the latest 13.10 (kernel 3.11.0-12-generic) we performed a backup which is essentially an rsync from a 6 disk array to a USB HDD - both are BTRFS filesystems After several hours the machine was unresponsive and the screen full of out of memory errors and killing lots of different processes. This was happening at the same time as bug #1237794 - the bugs may be related, they may not. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238658/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238596] Re: Peripherals trough Dell E-port port replicator not recognized
** Attachment added: apport-bug on a buggy system (3.8.0-30) https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238596/+attachment/3874450/+files/apport-bug.buggy.log ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238596 Title: Peripherals trough Dell E-port port replicator not recognized Status in “linux” package in Ubuntu: Confirmed Bug description: Since I have upgraded my Kernel to 3.8.0-30.44, peripherals (DVI-D Display, USB Mouse, USB Keyboard) connected trough the E-port port replicator are no more recognized by the system and doesn't work anymore. If I revert the kernel to 3.8.0-25.37, the problem disappear. I use Ubuntu 13.04. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238596/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159145] Re: Centrino Advanced-N 6235 wireless connection on Dell XPS 13 crash with iwlwifi: fail to flush all tx fifo queues
When I load the Module with modprobe iwlwifi 11n_disable=1 Iit looks like its gone... https://lkml.org/lkml/2013/5/22/119 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159145 Title: Centrino Advanced-N 6235 wireless connection on Dell XPS 13 crash with iwlwifi: fail to flush all tx fifo queues Status in “linux” package in Ubuntu: Confirmed Bug description: After some activity, the wireless connection on my Dell XPS 13 laptop drops and I have to reboot to have it working again. I had this bug with ubuntu 12.04 preinstalled by Dell. I had done a 13.04 fresh install to try to solve the problem, but with last kernel (3.8.0-13.23) after some time the connection eventually drops. I can't restore it without rebooting the entire system. It always happens with [] iwlwifi :01:00.0: fail to flush all tx fifo queues in dmesg The network controller is: 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) I think this bug may be the same of https://bugs.launchpad.net/ubuntu/+source/linux/+bug/836250 , but may also be unrelated because: 1) none of the solution proposed for #836250 works for me. I tried some iwlwifi module options (11n_disable=1, swcrypto=1, bt_coex_active=0) and turning off power managment (iwconfig wlan0 power off). 2) I seems to me that the patch from Intel attached in #836250 is already included in ubuntu 3.8.0-13.23 kernel. If it is correct, then that patch does not solve my problem. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-13-generic 3.8.0-13.23 [modified: boot/vmlinuz-3.8.0-13-generic] ProcVersionSignature: Ubuntu 3.8.0-13.23-generic 3.8.3 Uname: Linux 3.8.0-13-generic x86_64 ApportVersion: 2.9.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marco 1830 F pulseaudio Date: Sat Mar 23 15:13:09 2013 HibernationDevice: RESUME=UUID=f25f5441-ea8c-4dfc-baf9-f4468facd9eb InstallationDate: Installed on 2013-03-22 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130322) MachineType: Dell Inc. Dell System XPS L322X MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=it_IT.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-13-generic root=UUID=e849ca22-9f72-416d-8f75-b28a8e6a29f9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-13-generic N/A linux-backports-modules-3.8.0-13-generic N/A linux-firmware1.104 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/22/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0PJHXN dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA07:bd01/22/2013:svnDellInc.:pnDellSystemXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Dell System XPS L322X dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.6.1-0ubuntu10 Architecture: amd64 DistroRelease: Ubuntu 12.10 InstallationDate: Installed on 2013-03-23 (2 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=it_IT.UTF-8 SHELL=/bin/bash Tags: quantal running-unity Uname: Linux 3.9.0-030900rc4-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159145/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1237794] Re: hard lockup on filserver
Now running mainline kernel (3.12.0-999-generic #201310090426) and restesting -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1237794 Title: hard lockup on filserver Status in “linux” package in Ubuntu: Incomplete Bug description: Hi, My Core i7 18TB BTRFS file server has been upgraded to 13.10 and since doing so locks up frequently. Previously it never crashed and was only taken down for maintenance, Monday we upgraded to 13.10 and since then it locks up ever 20hrs or so. We were doing a large backup last night and it locked up within 6 or so hrs. On the 1st occurrence absolutely nothing was in the logs, on the 2nd occurrence there was some NFS hang messages, when system comes back up I will check and post any logging information gleaned. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237794/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238658] Re: rsync between two btrfs filesystems causes machines to crash with symptoms of memory leak
Output from: ubuntu-bug linux ** Attachment added: output from ubuntu-bug linux https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238658/+attachment/3874452/+files/apport.linux-image-3.11.0-12-generic.ulc9k4.apport -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238658 Title: rsync between two btrfs filesystems causes machines to crash with symptoms of memory leak Status in “linux” package in Ubuntu: New Bug description: Using the latest 13.10 (kernel 3.11.0-12-generic) we performed a backup which is essentially an rsync from a 6 disk array to a USB HDD - both are BTRFS filesystems After several hours the machine was unresponsive and the screen full of out of memory errors and killing lots of different processes. This was happening at the same time as bug #1237794 - the bugs may be related, they may not. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238658/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238188] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1238188/+attachment/3874418/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1000208] Re: 10ec:8171 wifi network get disconnected periodically -- Realtek RTL8191SEvA
Confirming that the workaround in #75 does the trick. Next time this happens, I'll file a new report as in #76. I'm not sure it it'll work though, as I have no network then. ** Changed in: linux (Ubuntu) Status: Expired = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1000208 Title: 10ec:8171 wifi network get disconnected periodically -- Realtek RTL8191SEvA Status in “linux” package in Ubuntu: Incomplete Bug description: I found a few similar bugs in launchpad history but they are at least 3-4 years old, and I encounter this problem just after upgrade to 12.04! I consulted a colleague who is a network expert, he suggested me to stop using wireless mouse, adjusted router settings, such as changed channels, added mac address binding, stopped ssid broadcasting, just in case there are some hackers trying to attack my network, but to no avail. Their are still possibilities of hardware configuration, environment issues or hackers around my house, but the most strange thing that triggered me reporting this bug is that all my other devices like windows laptop, android phones are all OK, only this Ubuntu laptop having problem! I also attach 2 files, one is the output of a ping command so that you can see what happened (during the ping session I tried to let network manager reconnect, even if it reconnected, the network is still not pingable. Another file is syslog about the network manager. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: network-manager 0.9.4.0-0ubuntu4 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Wed May 16 20:47:46 2012 IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) IpRoute: default via 10.0.0.3 dev wlan0 proto static 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.202 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH Wired connection 11438463e-1c73-40f3-b17c-7e348b229da5 802-3-ethernet1337172058 2012年05月16日 星期三 20时40分58秒 yes no /org/freedesktop/NetworkManager/Settings/1 MINGYANG 3cba4065-6d37-46ff-b35b-1f94b2bae5ba 802-11-wireless 1337172358 2012年05月16日 星期三 20时45分58秒 yes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.4.0connected enabled enabled enabledenabled disabled --- ApportVersion: 2.6.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: xrfang 2170 F pulseaudio /dev/snd/controlC0: xrfang 2170 F pulseaudio DistroRelease: Ubuntu 12.10 HibernationDevice: RESUME=UUID=3ff6f291-f4b3-43e6-9597-97497c7191c2 IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) IpRoute: default via 10.0.0.3 dev wlan0 proto static 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.103 metric 9 169.254.0.0/16 dev wlan0 scope link metric 1000 MachineType: Hewlett-Packard HP G32 Notebook PC NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true Package: network-manager 0.9.6.0-0ubuntu7 PackageArchitecture: amd64 ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=d9e5ee0c-a966-4a4e-98b1-46fb99421588 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5 RelatedPackageVersions: linux-restricted-modules-3.5.0-17-generic N/A linux-backports-modules-3.5.0-17-generic N/A linux-firmware1.95 Tags: quantal running-unity quantal running-unity Uname: Linux 3.5.0-17-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh
[Kernel-packages] [Bug 1238672] [NEW] toggling bluez adapter's Powered is unreliable
Public bug reported: powering down an adapter times out, and powering it back up again doesn't seem to work at all. Demonstration with bluez-test-adapter after a cold boot: --- charles@sita:~$ bluez-test-adapter powered 1 charles@sita:~$ bluez-test-adapter powered off Traceback (most recent call last): File /usr/bin/bluez-test-adapter, line 84, in module adapter.SetProperty(Powered, value) File /usr/lib/python2.7/dist-packages/dbus/proxies.py, line 70, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.7/dist-packages/dbus/proxies.py, line 145, in __call__ **keywords) File /usr/lib/python2.7/dist-packages/dbus/connection.py, line 651, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. charles@sita:~$ bluez-test-adapter powered 0 charles@sita:~$ bluez-test-adapter powered on charles@sita:~$ bluez-test-adapter powered 0 charles@sita:~$ bluez-test-adapter list [ /org/bluez/793/hci0 ] Name = ubuntu-0 Powered = 0 Devices = dbus.Array([dbus.ObjectPath('/org/bluez/793/hci0/dev_00_11_67_00_03_BD'), dbus.ObjectPath('/org/bluez/793/hci0/dev_2C_44_01_D9_F8_F0')], signature=dbus.Signature('o'), variant_level=1) DiscoverableTimeout = 0 PairableTimeout = 0 Discoverable = 0 Address = 60:D8:19:AA:F3:8B Discovering = 0 Pairable = 1 Class = 0x00 UUIDs = dbus.Array([dbus.String(u'1000--1000-8000-00805f9b34fb'), dbus.String(u'1001--1000-8000-00805f9b34fb'), dbus.String(u'112d--1000-8000-00805f9b34fb'), dbus.String(u'1112--1000-8000-00805f9b34fb'), dbus.String(u'111f--1000-8000-00805f9b34fb'), dbus.String(u'111e--1000-8000-00805f9b34fb'), dbus.String(u'110c--1000-8000-00805f9b34fb'), dbus.String(u'110e--1000-8000-00805f9b34fb'), dbus.String(u'1103--1000-8000-00805f9b34fb'), dbus.String(u'110a--1000-8000-00805f9b34fb'), dbus.String(u'110b--1000-8000-00805f9b34fb')], signature=dbus.Signature('s'), variant_level=1) charles@sita:~$ dpkg -s bluez Package: bluez Status: install ok installed Priority: optional Section: admin Installed-Size: 2375 Maintainer: Ubuntu Developers ubuntu-devel-disc...@lists.ubuntu.com Architecture: i386 Multi-Arch: foreign Version: 4.101-0ubuntu8b1 ** Affects: bluez (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1238672 Title: toggling bluez adapter's Powered is unreliable Status in “bluez” package in Ubuntu: New Bug description: powering down an adapter times out, and powering it back up again doesn't seem to work at all. Demonstration with bluez-test-adapter after a cold boot: --- charles@sita:~$ bluez-test-adapter powered 1 charles@sita:~$ bluez-test-adapter powered off Traceback (most recent call last): File /usr/bin/bluez-test-adapter, line 84, in module adapter.SetProperty(Powered, value) File /usr/lib/python2.7/dist-packages/dbus/proxies.py, line 70, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.7/dist-packages/dbus/proxies.py, line 145, in __call__ **keywords) File /usr/lib/python2.7/dist-packages/dbus/connection.py, line 651, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. charles@sita:~$ bluez-test-adapter powered 0 charles@sita:~$ bluez-test-adapter powered on charles@sita:~$ bluez-test-adapter powered 0 charles@sita:~$ bluez-test-adapter list [ /org/bluez/793/hci0 ] Name = ubuntu-0 Powered = 0 Devices = dbus.Array([dbus.ObjectPath('/org/bluez/793/hci0/dev_00_11_67_00_03_BD'), dbus.ObjectPath('/org/bluez/793/hci0/dev_2C_44_01_D9_F8_F0')], signature=dbus.Signature('o'), variant_level=1) DiscoverableTimeout = 0 PairableTimeout = 0 Discoverable = 0 Address = 60:D8:19:AA:F3:8B Discovering = 0 Pairable = 1 Class = 0x00 UUIDs = dbus.Array([dbus.String(u'1000--1000-8000-00805f9b34fb'), dbus.String(u'1001--1000-8000-00805f9b34fb'), dbus.String(u'112d--1000-8000-00805f9b34fb'), dbus.String(u'1112--1000-8000-00805f9b34fb'), dbus.String(u'111f--1000-8000-00805f9b34fb'), dbus.String(u'111e--1000-8000-00805f9b34fb'), dbus.String(u'110c--1000-8000-00805f9b34fb'),
[Kernel-packages] [Bug 1238188] Re: no desktop effects on a radeon 3100 graphics card in saucy
Sorry about the many updates, but I got an error when running the command as a ordinary user. When running as root, I finally didn't get any error messages. Hope this helps Hans-Peter -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Incomplete Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1006765] Re: 1033:0194 Hot plugging USB3.0 express card Not possible
Tried the latest 3.12.0-031200rc4-generic 64bit Kernel This works much better: - booting with card and USB-disk (USB-powered) inserted, is always working - plugging in card first and after that a device, is not working - plugging card with USB stick, work, but takes a long time - plugging card with USB-disk (USB powered) together dousn work, and gives slow mouse response - plugging card with USB-2-hub attached always works, it's possible to plug in/out disks and usb-sticks, but is slow sorry I don't have a USB-3 hub, will buy one, if this works it's a very good work-around !!! regards -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1006765 Title: 1033:0194 Hot plugging USB3.0 express card Not possible Status in “linux” package in Ubuntu: Incomplete Bug description: On my Lenovo T520 hot plugging USB3.0 PCI Express card not possible. Hot plugging USB devices in this Card is also not possible. Only way to access the card and USB device: is powering on with PCI card AND USB devices connected. Reconnecting devices after this is not possible. Re-Plugging the drive but also other USB products, are not recognized. WORKAROUND: sudo echo acpiphp /etc/modules Modify /etc/default/grub to have: GRUB_CMDLINE_LINUX_DEFAULT=quiet splash pciehp_force=1 pciehp_poll_mode=1 and run: sudo update-grub In kern.log: May 31 09:54:48 roland kernel: [ 1441.460174] hub 3-0:1.0: hub_port_status failed (err = -19) May 31 09:54:48 roland kernel: [ 1441.460244] hub 3-0:1.0: hub_port_status failed (err = -19) May 31 09:54:49 roland kernel: [ 1442.066711] hub 4-0:1.0: hub_port_status failed (err = -19) May 31 09:54:49 roland kernel: [ 1442.066773] hub 4-0:1.0: hub_port_status failed (err = -19) May 31 09:55:02 roland kernel: [ 1455.659879] hub 3-0:1.0: hub_port_status failed (err = -19) May 31 09:55:02 roland kernel: [ 1455.659938] hub 3-0:1.0: hub_port_status failed (err = -19) May 31 09:55:03 roland kernel: [ 1456.250534] hub 4-0:1.0: hub_port_status failed (err = -19) May 31 09:55:03 roland kernel: [ 1456.250595] hub 4-0:1.0: hub_port_status failed (err = -19) May 31 09:55:05 roland kernel: [ 1458.940363] hub 4-0:1.0: hub_port_status failed (err = -19) May 31 09:55:05 roland kernel: [ 1458.940429] hub 4-0:1.0: hub_port_status failed (err = -19) Plugging out the USB3 Express card: no messages in kern.log !! --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu8 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: roland 2949 F pulseaudio CRDA: country NL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20), NO-OUTDOOR (5250 - 5330 @ 40), (N/A, 20), NO-OUTDOOR, DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf272 irq 52' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:14f1506e,17aa21cf,0012 HDA:80862805,80860101,0010' Controls : 37 Simple ctrls : 14 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw unknown' Mixer name : 'ThinkPad EC (unknown)' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] DistroRelease: Ubuntu 12.04 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) MachineType: LENOVO 4243W29 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=e5e65e59-f323-4df0-a813-dc393d2a4970 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16 RelatedPackageVersions: linux-restricted-modules-3.2.0-24-generic N/A linux-backports-modules-3.2.0-24-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei Tags: precise staging precise staging Uname: Linux 3.2.0-24-generic x86_64 UpgradeStatus: Upgraded to precise on 2012-04-24 (37 days ago) UserGroups: adm admin audio cdrom dialout libvirtd lpadmin plugdev pulse pulse-access sambashare vboxusers video dmi.bios.date: 07/11/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 8AET49WW (1.29 ) dmi.board.asset.tag: Not Available dmi.board.name: 4243W29 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: LBNL02200 dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias:
[Kernel-packages] [Bug 1049657] Re: My usb 3 hard drive is mounting very slowly
** Changed in: linux (Ubuntu) Status: Incomplete = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1049657 Title: My usb 3 hard drive is mounting very slowly Status in “linux” package in Ubuntu: Fix Released Bug description: Hi ! I've go an usb 3 hard drive and i've got a problem on my xubuntu with it (i haven't got this problem on my debian squeeze). If i clic on « Monter le périphétique » (mount the hard drive), i've got this message : « Impossible de monter Système de fichiers 1,0 TB DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending » Also, i've got this with dmesg : arno@echalotte:~$ dmesg [...] [ 3998.904154] usb 2-5: new high-speed USB device number 2 using ehci_hcd [ 3999.070381] Initializing USB Mass Storage driver... [ 3999.070545] scsi6 : usb-storage 2-5:1.0 [ 3999.070644] usbcore: registered new interface driver usb-storage [ 3999.070646] USB Mass Storage support registered. [ 3999.098471] usbcore: registered new interface driver uas [ 4000.071192] scsi 6:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 4000.074467] scsi 6:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 4000.080533] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 4000.080825] scsi 6:0:0:1: Attached scsi generic sg3 type 13 [ 4000.084314] sd 6:0:0:0: [sdb] Spinning up diskready [ 4007.437353] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 4007.438495] sd 6:0:0:0: [sdb] Write Protect is off [ 4007.438507] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 4007.439344] sd 6:0:0:0: [sdb] No Caching mode page present [ 4007.439350] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4007.442529] sd 6:0:0:0: [sdb] No Caching mode page present [ 4007.442542] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4007.448249] sdb: sdb1 [ 4007.451711] sd 6:0:0:0: [sdb] No Caching mode page present [ 4007.451721] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4007.451730] sd 6:0:0:0: [sdb] Attached SCSI disk [ 4007.525713] ses 6:0:0:1: Attached Enclosure device [ 4498.171760] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 4800.796083] INFO: task mount:6196 blocked for more than 120 seconds. [ 4800.796087] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [ 4800.796090] mount D c1064b79 0 6196 6195 0x [ 4800.796096] edcfde08 0086 edcfddc4 c1064b79 f77cb3c0 f7108cb0 c18e13c0 c18e13c0 [ 4800.796105] e120fed1 043c f77cb3c0 f22c58d0 f2ce2610 0008 [ 4800.796113] edcfdde0 c1064c2f c18dce40 edc399b4 edc399b4 edcfdde0 c1027598 edcfddf4 [ 4800.796121] Call Trace: [ 4800.796131] [c1064b79] ? wait_on_cpu_work+0x89/0xb0 [ 4800.796135] [c1064c2f] ? wait_on_work+0x8f/0x100 [ 4800.796141] [c1027598] ? default_spin_lock_flags+0x8/0x10 [ 4800.796147] [c15748ad] ? _raw_spin_lock_irqsave+0x2d/0x40 [ 4800.796152] [c128b577] ? __disk_unblock_events+0x47/0xd0 [ 4800.796157] [c1572ca5] schedule+0x35/0x50 [ 4800.796160] [c15745bd] rwsem_down_failed_common+0x9d/0xf0 [ 4800.796164] [c1574622] rwsem_down_write_failed+0x12/0x20 [ 4800.796169] [c12a5492] call_rwsem_down_write_failed+0x6/0x8 [ 4800.796173] [c1573bd4] ? down_write+0x24/0x30 [ 4800.796178] [c11348b0] ? set_bdev_super+0x30/0x30 [ 4800.796181] [c11353db] sget+0xcb/0x1c0 [ 4800.796185] [c1134880] ? ns_test_super+0x20/0x20 [ 4800.796188] [c1135625] mount_bdev+0xb5/0x1d0 [ 4800.796193] [c11da3a0] ? ext4_calculate_overhead+0x190/0x190 [ 4800.796199] [c11c9f0f] ext4_mount+0x1f/0x30 [ 4800.796203] [c11da3a0] ? ext4_calculate_overhead+0x190/0x190 [ 4800.796206] [c11360b6] mount_fs+0x36/0x180 [ 4800.796210] [c110277f] ? __alloc_percpu+0xf/0x20 [ 4800.796214] [c114ce3e] ? alloc_vfsmnt+0xae/0x130 [ 4800.796218] [c114cf51] vfs_kern_mount+0x51/0xa0 [ 4800.796222] [c114e07e] do_kern_mount+0x3e/0xe0 [ 4800.796225] [c114f774] do_mount+0x164/0x200 [ 4800.796229] [c114fbab] sys_mount+0x6b/0xa0 [ 4800.796232] [c1574a54] syscall_call+0x7/0xb [ 4800.796236] [c157] ? powernow_decode_bios+0xaa/0x15f [ 4920.796113] INFO: task mount:6196 blocked for more than 120 seconds. [ 4920.796118] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [ 4920.796121] mount D c1064b79 0 6196 6195 0x [ 4920.796126] edcfde08 0086 edcfddc4 c1064b79 f77cb3c0 f7108cb0 c18e13c0 c18e13c0 [ 4920.796135] e120fed1 043c f77cb3c0 f22c58d0 f2ce2610 0008 [ 4920.796143] edcfdde0 c1064c2f c18dce40 edc399b4 edc399b4 edcfdde0 c1027598 edcfddf4 [ 4920.796151] Call Trace: [ 4920.796160] [c1064b79] ?
[Kernel-packages] [Bug 1238188] Re: no desktop effects on a radeon 3100 graphics card in saucy
I installed the upstream kernel and the behaviour is exactly the same. hp@hp:/proc$ cat version Linux version 3.12.0-031200rc4-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201310080738 SMP Tue Oct 8 11:49:39 UTC 2013 hp@hp:/proc$ regards, hp ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238188 Title: no desktop effects on a radeon 3100 graphics card in saucy Status in “linux” package in Ubuntu: Confirmed Bug description: On raring, my radeon 3100 was working pretty well. desktop cube switch was working, for example. Blur effect slowed the desktop down. When I upgraded to saucy on sept. 25 I soon noticed that the desktop was very fast. I could even enable blur effect and it didn't do any harm. After the update on Sept. 30. all the graphics performance was gone. Most desktop effects are disabled. Compositing type is set to XRender, Qt graphics sytem is set to Native. When I try to set Compositing Type to OpenGL and Qt graphics sytem to Raster, I get the message, that 6 desktop effect could not be enabled. Detail window says this is because they require OpenGL. I have no idea where to start digging, so any help is appreciated. regards,Hans-Peter BTW: I'm not using the fglrx driver. I guess they quit support for the 3100 a year ago, or maybe two (or they messed something up) --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC84019NW dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F6v03.10:bd10/26/2009:svnHewlett-Packard:pnHPCompaqdc5850SmallFormFactor:pvr:rvnHewlett-Packard:rn3029h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc5850 Small Form Factor dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hp 2266 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=184fb191-e6db-43dc-a483-305fdf7ad451 InstallationDate: Installed on 2012-02-02 (616 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IwConfig: tap0 no wireless extensions. lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=b24e5fc5-5982-48e7-b75f-478074b4687e ro elevator=noop quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: Tags: saucy Uname: Linux 3.11.0-12-generic i686 UpgradeStatus: Upgraded to saucy on 2013-09-27 (13 days ago) UserGroups: dmi.bios.date: 10/26/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.10 dmi.board.name: 3029h
[Kernel-packages] [Bug 1238678] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238678 Title: Double suspend to ram and system malfunction after 2nd sleep. Status in “linux” package in Ubuntu: Confirmed Bug description: After one or two successful suspend-to-ram cycles the system wakes up and immediately goes back to sleep. After this double suspend, some systems like rfkill, for example, will only work after a reboot. Steps in which I can consistently reproduce the bug: 1. suspend to RAM; 2. Wake up the computer; 3. Repeat 1. and 2. two or more times (sometimes is one cycle, sometimes it's two cycles and I even went 4 cycles without incidents only to have this behaviour on the 5th.) The double suspend behaviour seems to happen more consistently if a long time (a day or so) goes by between the suspend and the resume. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.18 ProcVersionSignature: Ubuntu 3.11.0-12.18-generic 3.11.3 Uname: Linux 3.11.0-12-generic i686 ApportVersion: 2.12.5-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lacsilva 4364 F pulseaudio /dev/snd/controlC0: lacsilva 4364 F pulseaudio Date: Fri Oct 11 14:37:39 2013 HibernationDevice: RESUME=UUID=cd871376-0405-4aa9-a824-6643baad5594 InstallationDate: Installed on 2012-07-20 (447 days ago) InstallationMedia: Kubuntu 12.10 Quantal Quetzal - Alpha i386 (20120627) Lsusb: Bus 002 Device 003: ID 04f2:b044 Chicony Electronics Co., Ltd Acer CrystalEye Webcam Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire 5740 MarkForUpload: True ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-12-generic root=UUID=8652aded-5fcc-4ed8-9334-dbec7c1b985d ro radeon.audio=1 radeon.dpm=1 splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-09-06 (34 days ago) dmi.bios.date: 11/26/2009 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.09 dmi.board.name: Aspire 5740 dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Rev dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.09:bd11/26/2009:svnAcer:pnAspire5740:pvrRev:rvnAcer:rnAspire5740:rvrRev:cvnAcer:ct10:cvrRev: dmi.product.name: Aspire 5740 dmi.product.version: Rev dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238678/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1067079] Re: 0546:3304 [Dell Studio XPS 8100] Unable to connect Hedcamz HEDCAM HD video cameras via USB
Correcting status - should be Confirmed, not In Progress. ** Changed in: linux (Ubuntu) Status: In Progress = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1067079 Title: 0546:3304 [Dell Studio XPS 8100] Unable to connect Hedcamz HEDCAM HD video cameras via USB Status in “linux” package in Ubuntu: Confirmed Bug description: Recently-installed Ubuntu 12.04 system with all the latest updates. - Expected - This issue relates to following product: Bus 002 Device 015: ID 0546:3304 Polaroid Corp. a500 Digital Camera HEDCAM HD WIDE Waterproof Wearable Camcorder http://www.hedcamz.com/cameras/hedcam/hedcam-wide When this device is connected via USB, Ubuntu should automatically recognise it and, ideally, automatically mount the removable MicroSD storage media (4GB). This allows the user to manage the videos created using the device. - Results - Communication with the device is not successful, and the following errors are logged to /var/log/syslog. Oct 15 21:35:27 shatner kernel: [26968.170620] hub 2-1:1.0: unable to enumerate USB device on port 5 Oct 15 21:35:28 shatner kernel: [26968.426177] hub 2-1:1.0: unable to enumerate USB device on port 5 Oct 15 21:35:29 shatner kernel: [26969.504032] usb 2-1.5: new high-speed USB device number 6 using ehci_hcd Oct 15 21:35:29 shatner kernel: [26969.598510] scsi5 : usb-storage 2-1.5:1.0 Oct 15 21:35:29 shatner mtp-probe: checking bus 2, device 6: /sys/devices/pci:00/:00:1d.0/usb2/2-1/2-1.5 Oct 15 21:35:29 shatner mtp-probe: bus: 2, device: 6 was not an MTP device Oct 15 21:35:30 shatner kernel: [26970.705579] scsi 5:0:0:0: Direct-Access Digital Camera Storage 1.00 PQ: 0 ANSI: 5 Oct 15 21:35:30 shatner kernel: [26970.707733] sd 5:0:0:0: Attached scsi generic sg7 type 0 Oct 15 21:35:30 shatner kernel: [26970.709728] sd 5:0:0:0: [sdg] 7841792 512-byte logical blocks: (4.01 GB/3.73 GiB) Oct 15 21:35:30 shatner kernel: [26970.711464] sd 5:0:0:0: [sdg] Write Protect is off Oct 15 21:35:30 shatner kernel: [26970.711474] sd 5:0:0:0: [sdg] Mode Sense: 17 00 00 08 Oct 15 21:35:30 shatner kernel: [26970.712041] sd 5:0:0:0: [sdg] No Caching mode page present Oct 15 21:35:30 shatner kernel: [26970.712046] sd 5:0:0:0: [sdg] Assuming drive cache: write through Oct 15 21:35:30 shatner kernel: [26970.714869] sd 5:0:0:0: [sdg] No Caching mode page present Oct 15 21:35:30 shatner kernel: [26970.714875] sd 5:0:0:0: [sdg] Assuming drive cache: write through Oct 15 21:35:30 shatner kernel: [26970.716578] sdg: sdg1 Oct 15 21:35:30 shatner kernel: [26970.719667] sd 5:0:0:0: [sdg] No Caching mode page present Oct 15 21:35:30 shatner kernel: [26970.719672] sd 5:0:0:0: [sdg] Assuming drive cache: write through Oct 15 21:35:30 shatner kernel: [26970.719677] sd 5:0:0:0: [sdg] Attached SCSI removable disk Oct 15 21:35:30 shatner kernel: [26970.743051] sd 5:0:0:0: [sdg] Unhandled sense code Oct 15 21:35:30 shatner kernel: [26970.743056] sd 5:0:0:0: [sdg] Result: hostbyte=invalid driverbyte=DRIVER_SENSE Oct 15 21:35:30 shatner kernel: [26970.743062] sd 5:0:0:0: [sdg] Sense Key : Medium Error [current] Oct 15 21:35:30 shatner kernel: [26970.743069] sd 5:0:0:0: [sdg] Add. Sense: Unrecovered read error Oct 15 21:35:30 shatner kernel: [26970.743075] sd 5:0:0:0: [sdg] CDB: Read(10): 28 00 00 77 a7 f0 00 00 08 00 Oct 15 21:35:30 shatner kernel: [26970.743088] end_request: critical target error, dev sdg, sector 7841776 Oct 15 21:35:30 shatner kernel: [26970.743094] Buffer I/O error on device sdg, logical block 980222 There is another open ticket, Bug #913567, appears to be the same issue. See the followig user comments, that mention the same manufacturer. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913567/comments/2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913567/comments/5 ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-32-generic 3.2.0-32.51 ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30 Uname: Linux 3.2.0-32-generic x86_64 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu13 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D7p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf7ff8000 irq 46' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:10ec0887,1028040d,00100202 HDA:80862804,80860101,0010' Controls :
[Kernel-packages] [Bug 1238446] Re: Ubiquity is stuck after Prepare step
Please run sudo dd if=/dev/sda of=parttab count=34, and attach the parttab file to the bug report. ** No longer affects: linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238446 Title: Ubiquity is stuck after Prepare step Status in “parted” package in Ubuntu: New Status in “ubiquity” package in Ubuntu: Confirmed Bug description: I am using the Kubuntu Beta 2 Live CD to install it on my Sony Vaio SVS13A190X laptop. It has one SSD with GPT partition and uses UEFI. After the prepare step, the installer hangs, presumably because of an inability to read some partitions, going by the syslog (attached). There is no indication of error, the installer is just stuck with the Wait mouse pointer spinning. I have used the Kubuntu 13.04 in the past to install successfully on this laptop. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu4659 F pulseaudio CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- LiveMediaBuild: Kubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Sony Corporation SVS13A190X MarkForUpload: True Package: ubiquity 2.15.20 [modified: lib/partman/automatically_partition/question] PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy saucy ubiquity-2.15.20 kubuntu Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/22/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0143C5 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0143C5:bd08/22/2012:svnSonyCorporation:pnSVS13A190X:pvrC60AL06C:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVS13A190X dmi.product.version: C60AL06C dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1238446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1233787] Re: linux: 3.5.0-42.65 -proposed tracker
The Hardware Certification team have begun testing this -proposed kernel ** Changed in: kernel-sru-workflow/certification-testing Assignee: Canonical Hardware Certification (canonical-hw-cert) = Sylvain Pineau (sylvain-pineau) ** Changed in: kernel-sru-workflow/certification-testing Status: Confirmed = In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1233787 Title: linux: 3.5.0-42.65 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-lbm series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux” package in Ubuntu: Invalid Status in “linux” source package in Quantal: New Bug description: This bug is for tracking the 3.5.0-42.65 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 01. October 2013 18:05 UTC kernel-stable-Prepare-package-end:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-end:Wednesday, 02. October 2013 06:02 UTC kernel-stable-phase:Verification kernel-stable-phase-changed:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Verification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Certification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Security-signoff-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-end:Thursday, 03. October 2013 01:02 UTC kernel-stable-Security-signoff-end:Thursday, 10. October 2013 07:02 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1233787/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1233787] Re: linux: 3.5.0-42.65 -proposed tracker
The Hardware Certification team have completed testing this -proposed kernel. No regressions were observed. The report is available at: http://people.canonical.com/~hwcert/sru-testing/quantal/3.5.0-42.65/quantal-proposed.html ** Changed in: kernel-sru-workflow/certification-testing Status: In Progress = Fix Released ** Tags added: certification-testing-passed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1233787 Title: linux: 3.5.0-42.65 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-lbm series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux” package in Ubuntu: Invalid Status in “linux” source package in Quantal: New Bug description: This bug is for tracking the 3.5.0-42.65 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 01. October 2013 18:05 UTC kernel-stable-Prepare-package-end:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-end:Wednesday, 02. October 2013 06:02 UTC kernel-stable-phase:Verification kernel-stable-phase-changed:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Verification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Certification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Security-signoff-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-end:Thursday, 03. October 2013 01:02 UTC kernel-stable-Security-signoff-end:Thursday, 10. October 2013 07:02 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1233787/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1233777] Re: linux: 3.8.0-32.47 -proposed tracker
The Hardware Certification team have completed testing this -proposed kernel. No regressions were observed. The report is available at: http://people.canonical.com/~hwcert/sru-testing/raring/3.8.0-32.47/raring-proposed.html ** Changed in: kernel-sru-workflow/certification-testing Status: In Progress = Fix Released ** Tags added: certification-testing-passed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1233777 Title: linux: 3.8.0-32.47 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux” package in Ubuntu: Invalid Status in “linux” source package in Raring: New Bug description: This bug is for tracking the 3.8.0-32.47 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 01. October 2013 17:25 UTC kernel-stable-Prepare-package-end:Wednesday, 02. October 2013 04:07 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 02. October 2013 04:07 UTC kernel-stable-Promote-to-proposed-end:Wednesday, 02. October 2013 06:01 UTC kernel-stable-phase:Verification kernel-stable-phase-changed:Wednesday, 02. October 2013 07:02 UTC kernel-stable-Verification-testing-start:Wednesday, 02. October 2013 07:02 UTC kernel-stable-Certification-testing-start:Wednesday, 02. October 2013 07:02 UTC kernel-stable-Security-signoff-start:Wednesday, 02. October 2013 07:02 UTC kernel-stable-Regression-testing-start:Wednesday, 02. October 2013 07:02 UTC kernel-stable-Regression-testing-end:Thursday, 03. October 2013 12:01 UTC kernel-stable-Security-signoff-end:Thursday, 10. October 2013 06:02 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1233777/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1233349] Re: linux: 3.2.0-55.85 -proposed tracker
The Hardware Certification team have begun testing this -proposed kernel ** Changed in: kernel-sru-workflow/certification-testing Status: Confirmed = In Progress ** Changed in: kernel-sru-workflow/certification-testing Assignee: Canonical Hardware Certification (canonical-hw-cert) = Sylvain Pineau (sylvain-pineau) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1233349 Title: linux: 3.2.0-55.85 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-lbm series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux” package in Ubuntu: Invalid Status in “linux” source package in Precise: New Bug description: This bug is for tracking the 3.2.0-55.84 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Monday, 30. September 2013 19:34 UTC kernel-stable-Prepare-package-end:Wednesday, 02. October 2013 21:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 02. October 2013 21:01 UTC kernel-stable-Promote-to-proposed-end:Wednesday, 02. October 2013 22:01 UTC kernel-stable-phase:Verification kernel-stable-phase-changed:Wednesday, 02. October 2013 23:02 UTC kernel-stable-Verification-testing-start:Wednesday, 02. October 2013 23:02 UTC kernel-stable-Certification-testing-start:Wednesday, 02. October 2013 23:02 UTC kernel-stable-Security-signoff-start:Wednesday, 02. October 2013 23:02 UTC kernel-stable-Regression-testing-start:Wednesday, 02. October 2013 23:02 UTC kernel-stable-Regression-testing-end:Friday, 04. October 2013 03:01 UTC kernel-stable-Security-signoff-end:Thursday, 10. October 2013 05:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1233349/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1233787] verification-testing task not set to correct state during release test
The verification-testing task was not set to one of the following states during the release test: Fix Released, verification-testing task was set to state In Progress Further processing of this bug by Workflow Manager is halted. ** Changed in: kernel-sru-workflow Status: In Progress = Incomplete ** Description changed: This bug is for tracking the 3.5.0-42.65 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 01. October 2013 18:05 UTC kernel-stable-Prepare-package-end:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-end:Wednesday, 02. October 2013 06:02 UTC kernel-stable-phase:Verification kernel-stable-phase-changed:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Verification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Certification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Security-signoff-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-end:Thursday, 03. October 2013 01:02 UTC kernel-stable-Security-signoff-end:Thursday, 10. October 2013 07:02 UTC + kernel-stable-Certification-testing-end:Friday, 11. October 2013 15:02 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1233787 Title: linux: 3.5.0-42.65 -proposed tracker Status in Kernel SRU Workflow: Incomplete Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-lbm series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux” package in Ubuntu: Invalid Status in “linux” source package in Quantal: New Bug description: This bug is for tracking the 3.5.0-42.65 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 01. October 2013 18:05 UTC kernel-stable-Prepare-package-end:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 02. October 2013 01:10 UTC kernel-stable-Promote-to-proposed-end:Wednesday, 02. October 2013 06:02 UTC kernel-stable-phase:Verification kernel-stable-phase-changed:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Verification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Certification-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Security-signoff-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-start:Wednesday, 02. October 2013 07:03 UTC kernel-stable-Regression-testing-end:Thursday, 03. October 2013 01:02 UTC kernel-stable-Security-signoff-end:Thursday, 10. October 2013 07:02 UTC kernel-stable-Certification-testing-end:Friday, 11. October 2013 15:02 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1233787/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 44233] Re: mount udf dvd fails, possible wrong fstab entry
** Changed in: util-linux (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/44233 Title: mount udf dvd fails, possible wrong fstab entry Status in The Util-Linux-ng Set of Utilities: Fix Released Status in “linux” package in Ubuntu: Invalid Status in “util-linux” package in Ubuntu: Fix Released Bug description: Binary package hint: mount I cannot mount DVDs with udf file system. iso9660 cdroms and dvds work okay. My fstab has the entry: /dev/hdc/media/cdrom0 udf,iso9660 user,noauto 0 0 When trying to mount a udf dvd, I get the message: wrong fs type, bad option, bad superblock on /dev/hdc, missing codepage or other error /var/log/messages shows: Unable to identify CD-ROM format. Changing the fstype in /etc/fstab from udf,iso9660 to auto, makes everything work fine. Is the fstype udf,iso9660 supposed to work and the problem is in mount? Or is this correct that one cannot use mutliple fstypes in fstab? Then the problem is in the program which created fstab at installaion (installed with dapper flight 5 cdrom) Best, Daniel To manage notifications about this bug go to: https://bugs.launchpad.net/util-linux-ng/+bug/44233/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1237392] Re: kernels following version 3.8.0-27 do not start
Can you test the following two upstream kernels: 3.8.13.4: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8.13.4-raring/ 3.8.13.5: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8.13.5-raring/ We can bisect between these two versions if 3.8.13.4 is good and 3.8.13.5 is bad. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1237392 Title: kernels following version 3.8.0-27 do not start Status in “linux” package in Ubuntu: Incomplete Bug description: All kernel updates on ubuntu following kernel 3.8.0-27 result in an empty screen with no indication of startup, no response to the keyboard. I can only start up using kernel version 3.8.0-27-generic. All following numbers (up to and including 3.8.0-31-generic) do not result in a running system. Also, the display no message at all when starting up (after grub). I checked the logfiles with grep -n Linux version 3.8.0- * and found only 27 to be logged, nothing for the other kernels. I am at a loss how to continue. I am running the most recent version of Ubuntu server. Two days ago I reinstalled Ubuntu with essentially the same result. The installation kernel version 3.8.0-19 works fine. The updated kernel 3.8.0-31 does not work. The following is the situation: When I let the machine start on itself I get no output at all. When I manually tell ubuntu to start the most recent kernel, I get 2 lines: Loading Linux-3.8.0-31-generic ... Loading initial ramdisk ... that's it. When I manually start the recovery kernel, I get a lot of information. Finally it drops to a terminal and indicates it could not load the LVM partition /dev/mapper/Server-Root. This is why I never see any result in my message or dmesg on disk. The problem seems to be with the Areca Raid controller. It does a reset of the scsi bus eh until it finally gives up and drops to a terminal. A while after the system goes berserk with messages of non responding scsi bus. As I cannot reach my harddisk, is there a way to find out what is wrong? Why does everything work fine up to and including kernel 27 and starts to malfunction after that? Did the Areca software change in some way? P.S. When I start kernel version 3.8.0-19, everything works fine. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: ubuntu-release-upgrader-core 1:0.192.13 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 CrashDB: ubuntu Date: Wed Oct 9 14:53:03 2013 InstallationDate: Installed on 2013-10-07 (1 days ago) InstallationMedia: Ubuntu-Server 13.04 Raring Ringtail - Release amd64 (20130423.1) MarkForUpload: True PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237392/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238345] Re: [Dell Inc. Latitude D830] suspend/resume failure
** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238345 Title: [Dell Inc. Latitude D830] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: I don't know much else to say. Rob ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-11-generic 3.11.0-11.17 ProcVersionSignature: Ubuntu 3.11.0-11.17-generic 3.11.3 Uname: Linux 3.11.0-11-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: frohro 2199 F pulseaudio /dev/snd/pcmC0D0c: frohro 2199 F...m pulseaudio /dev/snd/pcmC0D0p: frohro 2199 F...m pulseaudio CurrentDmesg: [9.568083] tg3 :09:00.0 eth0: Flow control is on for TX and on for RX [9.568549] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 826.035884] perf samples too long (2507 2500), lowering kernel.perf_event_max_sample_rate to 5 Date: Thu Oct 10 18:07:34 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=b55c2325-f17b-4d21-8d15-33cc3af80a5a InterpreterPath: /usr/bin/python3.3 MachineType: Dell Inc. Latitude D830 MarkForUpload: True PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-11-generic root=/dev/mapper/rob--d830--vg-root ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-11-generic N/A linux-backports-modules-3.11.0-11-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [Dell Inc. Latitude D830] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-10-09 (1 days ago) UserGroups: dmi.bios.date: 01/04/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A15 dmi.board.name: 0T497J dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA15:bd01/04/2010:svnDellInc.:pnLatitudeD830:pvr:rvnDellInc.:rn0T497J:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D830 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238345/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1238265] Re: usb 1.1-1 string descriptor 0 read error
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.12 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.12-rc4-saucy/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1238265 Title: usb 1.1-1 string descriptor 0 read error Status in “linux” package in Ubuntu: Incomplete Bug description: usb 1.1-1 string descriptor 0 read error: -22 ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-32-generic 3.8.0-32.47 ProcVersionSignature: Ubuntu 3.8.0-32.47-generic 3.8.13.10 Uname: Linux 3.8.0-32-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: machaneka 2023 F pulseaudio Date: Thu Oct 10 22:02:49 2013 HibernationDevice: RESUME=UUID=68c8d656-e71c-4251-9baf-3789ebde6fe2 InstallationDate: Installed on 2013-09-14 (26 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Acer Aspire V3-571G MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-32-generic root=UUID=7f89d647-f4d2-4e18-9a55-96704e682e4f ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.8.0-32-generic N/A linux-backports-modules-3.8.0-32-generic N/A linux-firmware1.106 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/06/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.01 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.01 dmi.modalias: dmi:bvnAcer:bvrV2.01:bd08/06/2012:svnAcer:pnAspireV3-571G:pvrV2.01:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.01: dmi.product.name: Aspire V3-571G dmi.product.version: V2.01 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1238265/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1208988] Re: AppArmor no longer mediates access to path-based AF_UNIX socket files
** Changed in: firefox (Ubuntu Saucy) Status: Triaged = Fix Committed ** Changed in: firefox (Ubuntu Saucy) Milestone: None = saucy-updates ** Changed in: firefox (Ubuntu Saucy) Assignee: (unassigned) = Jamie Strandboge (jdstrand) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-maguro in Ubuntu. https://bugs.launchpad.net/bugs/1208988 Title: AppArmor no longer mediates access to path-based AF_UNIX socket files Status in AppArmor Linux application security framework: Triaged Status in “apparmor” package in Ubuntu: Fix Released Status in “apparmor-easyprof-ubuntu” package in Ubuntu: Fix Released Status in “firefox” package in Ubuntu: Fix Committed Status in “linux” package in Ubuntu: Fix Released Status in “linux-grouper” package in Ubuntu: Fix Released Status in “linux-maguro” package in Ubuntu: Fix Released Status in “linux-mako” package in Ubuntu: Fix Released Status in “linux-manta” package in Ubuntu: Fix Released Status in “apparmor” source package in Saucy: Fix Released Status in “apparmor-easyprof-ubuntu” source package in Saucy: Fix Released Status in “firefox” source package in Saucy: Fix Committed Bug description: [Impact] * AppArmor removed unix domain socket mediation as part of the 2.4 (karmic) rewrite to the security_path hooks so that it could be upstreamed into the main kernel. The result being apparmor no longer mediates access to AF_UNIX socket files. Or more specifically it does not mediation connections between sockets, creation of a socket within the filesystem is mediated * Confined applications can currently read from and write to any AF_UNIX socket files * Existing AppArmor profiles that contain file rules granting write access to AF_UNIX socket files are effectively being ignored * The move from the vfs hooks patches (old, out-of-tree) AppArmor and the security_path hooks apparmor incorporated into mainline in 2.6.36 were the cause of this regression. apparmor 2.4 (version in karmic) also removed other features are part of the rewrite to security_path hooks/upstreaming effort. * For Ubuntu, Karmic 9.10 and all newer, releases are affected. 8.04 LTS used the vfs patches and was not affected. * Mediation of unix domain filesystem based sockets is needed for 13.10 click apps confinement [Test Case] * Confining dbus-send and sending a message to the system bus is an easy manual testing method. Load a profile for dbus-send: $ cat EOF | sudo apparmor_parser -r #include tunables/global /usr/bin/dbus-send { #include abstractions/base /usr/bin/dbus-send r, # /var/run/dbus/system_bus_socket rw, } EOF * Note that the system_bus_socket rule is commented out. Now, run dbus-send under strace and see if the connect() fails. Here's the unexpected output, taken from an Ubuntu Saucy system: $ strace -e connect -- \ dbus-send --system --dest=org.freedesktop.DBus \ /org/freedesktop/DBus org.freedesktop.DBus.ListNames connect(3, {sa_family=AF_LOCAL, sun_path=/var/run/dbus/system_bus_socket}, 33) = 0 +++ exited with 0 +++ * Here's the expected output, taken from an 8.04 LTS system: $ strace -e connect -- \ dbus-send --system --dest=org.freedesktop.DBus \ /org/freedesktop/DBus org.freedesktop.DBus.ListNames connect(3, {sa_family=AF_FILE, path=/var/run/dbus/system_bus_socket}, 33) = -1 EACCES (Permission denied) Failed to open connection to system message bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Permission denied * Or, you can apply the AppArmor regression test suite patch attached to this bug and run the automated tests: $ cd tests/regression/apparmor $ make unix_fd_{server,client} unix_socket_file{,_client} /dev/null $ sudo bash unix_fd_server.sh $ sudo bash unix_socket_file.sh [Regression Potential] * Profiles developed with affected kernels aren't likely to have the necessary rules because the proper LSM hook was not implemented in those kernels, so the policy writer didn't need to grant access to AF_UNIX socket files * The profiles shipped with AppArmor can, and will, be updated to grant access to AF_UNIX socket files, but local policy modifications cannot be addressed by upstream/distros. Once updated kernels begin enforcing mediation of AF_UNIX socket files, rules in local profiles may no longer be sufficient, resulting in new AppArmor denials for AF_UNIX socket files. To manage notifications about this bug go to: https://bugs.launchpad.net/apparmor/+bug/1208988/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1185521] Re: Mounting as minix can block a long time
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.12 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.12-rc4-saucy/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1185521 Title: Mounting as minix can block a long time Status in “linux” package in Ubuntu: Incomplete Bug description: I'm using Ubuntu 13.10 dev with mount 2.20.1-5.1ubuntu8. Forcing to use minix as filesystem on mounting a device which has another filesystem and doing another disk operation on the physical device will cause mount to block until the disk operation is finished. Here is an example: 1. As preparation clean the cache with echo 3 /proc/sys/vm/drop_caches. 2. Execute mount -t minix -v /dev/sda5 /mnt find / /dev/null (dev/sda5 is a swap partition and / is /dev/sda1 (ext4)). Because /dev/sda5 is a swap partition theoretically the mount operation should fail in a short time. But mount waits until the find command has finsihed which can need a long time. After this the following error is shown (as expected): root@ubuntu:~# mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Replacing minix with ext4 on mounting works fine. The mounting operation will fail too but this needs less than a seconds instead of a few minutes. It is even conspicuous that without another disk operation mounting as minix needs a few times longer than other filesystems. I'm assuming there is something broken on the minix module with checking for bad filesystems. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-12-generic. AplayDevices: List of PLAYBACK Hardware Devices card 0: SB [HDA ATI SB], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 ApportVersion: 2.12.5-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sworddragon 1569 F plugin-containe /dev/snd/pcmC0D0p: sworddragon 1569 F...m plugin-containe /dev/snd/timer: sworddragon 1569 f plugin-containe CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'SB'/'HDA ATI SB at 0xf9ff4000 irq 16' Mixer name : 'Realtek ALC662 rev1' Components : 'HDA:10ec0662,18497662,00100101' Controls : 36 Simple ctrls : 18 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: No such file or directory dmesg: write failed: Broken pipe DistroRelease: Ubuntu 13.10 EcryptfsInUse: Yes IwConfig: Error: [Errno 2] No such file or directory Lsusb: Error: [Errno 2] No such file or directory MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. MarkForUpload: True NonfreeKernelModules: nvidia Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=05338ff8-a226-421b-90a4-1dd45199f783 ro ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RfKill: Error: [Errno 2] No such file or directory Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo wireshark WifiSyslog: dmi.bios.date: 02/05/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.30 dmi.board.asset.tag: BC5FF4739C55 dmi.board.name: 960GM/U3S3 FX dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.30:bd02/05/2013:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rn960GM/U3S3FX:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled