RE: birdmouth joinery and adhesive
Nexabond 2500 Wood Adhesive another thing not available down here i see it's a instant adhesive anybody else used it as well tell me what its like Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Tuesday, 10 March 2015 11:44 AM To: Legacy group Subject: Re: birdmouth joinery and adhesive After fighting with it all day I decided 12 sides would be a pain in the ass. 6 I can do , I don't have the 8 sided bit. My Circle looks good from the inside two many gaps on the outside. I am trying to attach a photo But it does not want to leave I photo to my documents . I found the nexa bond at Rockler I was not spelling it right . I am gonna send this picture directly from iPhoto to Curt maybe he can get it to the thread. On Mon, Mar 9, 2015 at 5:50 PM, CURTIS GEORGE wrote: > Hello Bill and Cole. (and everyone else.) > It is a nice day out, but now that the snow is melting My shop is flooded. > ;-( Just cant win. (but its expected...) > Any How the topic is Birds-mouth joinery. I like > http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page > has helped me out a lot in the past, > Cole post some pictures when you get time, I cant wait to see how your > joinery works out. (even if its practice.) ;-) > talk to you all latter. > C.A.G. > > > From: "Bill Bulkeley" > To: legacy-ornamental-mills@googlegroups.com > Sent: Monday, March 9, 2015 5:26:05 PM > Subject: RE: birdmouth joinery and adhesive > > > Are you sure its nexbond I know maxbond if you have some post a picture > > Bill > > > > From: legacy-ornamental-mills@googlegroups.com > [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole > Sent: Tuesday, 10 March 2015 7:06 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: birdmouth joinery and adhesive > > > > Beautiful day and I thought I would practice my bird mouth joinery .The > directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . > Can this be right, that leaves just knife edge on the stock. I went ahead > and ran some scrap to practice setup and glueup . Also has anyone nexbond > adhesive , hope I am spelling that right I type it on google and nothing. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. - No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5751 / Virus Database: 4299/9266 - Release Date: 03/10/15 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: birdmouth joinery and adhesive
a glue bond stronger than the wood itself. > Sets in only minutes, cures in 1 hour! > Bonds reach full strength after 8 hours in most subtrates. > Generous open time gives you more time to work. > Thick consistency won't run or drip. > No activator required. > Nexabond 2500 is ideal for joinery applications such as dowels, mortise and > tenons, biscuits, dovetails and box joints. > In addition to wood on wood joints, Nexabond bonds other materials to wood, > such as metal, ceramic, glass, foam, leather, paper, composites, plastics > and more. > No water means no swelling and subsequent shrinkage. > Unlike with water-based glues, you can sand or machine immediately after > curing without worrying about joint lines becoming visible when the water > evaporates and the joint line shrinks. > Because Nexabond contains no water, it is also an excellent adhesive for > joining extremely oily woods. > Tight joints are important, since the parts won't swell as they do with > waterbased glues. > Accepts most stains and finishes. > > RELATED ARTICLES > > How to Apply Plywood Veneer Edge Banding to Solid Wood with Masking Tape > Hold-Downs > How to Apply Hot Melt Veneer Shelving Tape with a Hot Iron and J-Roller > How to Renovate a Wall Cabinet with Maple Veneers and Paneling > How to Stain Veneers to Match Hardwood Plywood Lumber > Applying Unbacked and Sliced Veneer Sheets with Yellow Wood Glue > Specialized Router Bits: Edge-banding Bits Cut Plywood Veneers with V-Groove > Joinery > Tips for Using a Clothes Iron to Apply Veneer to Plywood Shelving > Top Routing Techniques: Cleaning Up Veneer > Hand Saw Series - Veneer Saws > Is Veneering Just for Experts? > Veneers: Quarter or Plain Sliced? > How to Make Wood Veneer Sheets With the Caul Veneering Technique > How to Make a Shop-Made Veneer Press > Bookmatch Larger Veneer Wood Sheets by Splicing and Joining > Using Exotic Wood Veneer Sheets to Make Decorative Cabinet Drawer Fronts > Apply Veneer with Contact Cement > Thin Air Vacuum Veneer Press Tips > Refacing Your Cabinets with Veneer > Introduction to Veneering > How to Tell the Difference Between Baltic and Veneer Birch Plywood > > CA Residents: Prop. 65 info > > YOU MAY ALSO LIKE > > > 2 oz. Quick-Set Glue Activator > > No Reviews > $4.99 > Add to Cart > > 7 oz. Quick-Set Glue Aerosol Activator > > > $12.99 > Add to Cart > > 2 oz. Quick-Set Glue Debonder > > No Reviews > $7.39 > Add to Cart > > Stick Fast CA Glue Dry Box Kit > > > $39.99 > Add to Cart > > Loctite® Spray Adhesive > > No Reviews > $13.99 > Add to Cart > > Stick Fast CA Wood Finish Starter Kit > > No Reviews > $29.99 > Add to Cart > > WonderLok 'Em Loose Joint Repair > > > $6.29 > > Add to Cart > > > > > > Have a good night all. > C.A.G. > > > From: "Cole Andrews" > To: "Legacy group" > Sent: Monday, March 9, 2015 8:43:36 PM > Subject: Re: birdmouth joinery and adhesive > > After fighting with it all day I decided 12 sides would be a pain in > the ass. 6 I can do , I don't have the 8 sided bit. My Circle looks > good from the inside two many gaps on the outside. I am trying to > attach a photo But it does not want to leave I photo to my documents . > I found the nexa bond at Rockler I was not spelling it right . I am > gonna send this picture directly from iPhoto to Curt maybe he can get > it to the thread. > > On Mon, Mar 9, 2015 at 5:50 PM, CURTIS GEORGE wrote: >> Hello Bill and Cole. (and everyone else.) >> It is a nice day out, but now that the snow is melting My shop is flooded. >> ;-( Just cant win. (but its expected...) >> Any How the topic is Birds-mouth joinery. I like >> http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web >> page >> has helped me out a lot in the past, >> Cole post some pictures when you get time, I cant wait to see how your >> joinery works out. (even if its practice.) ;-) >> talk to you all latter. >> C.A.G. >> >> >> From: "Bill Bulkeley" >> To: legacy-ornamental-mills@googlegroups.com >> Sent: Monday, March 9, 2015 5:26:05 PM >> Subject: RE: birdmouth joinery and adhesive >> >> >> Are you sure its nexbond I know maxbond if you have some post a picture >> >> Bill >> >> >> >> From: legacy-ornamental-mills@googlegroups.com >> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole >> Sent: Tuesday, 10 March 2015 7:06 AM >> To: legacy-ornamental-mills@googlegroups.com
Re: birdmouth joinery and adhesive
After fighting with it all day I decided 12 sides would be a pain in the ass. 6 I can do , I don't have the 8 sided bit. My Circle looks good from the inside two many gaps on the outside. I am trying to attach a photo But it does not want to leave I photo to my documents . I found the nexa bond at Rockler I was not spelling it right . I am gonna send this picture directly from iPhoto to Curt maybe he can get it to the thread. On Mon, Mar 9, 2015 at 5:50 PM, CURTIS GEORGE wrote: > Hello Bill and Cole. (and everyone else.) > It is a nice day out, but now that the snow is melting My shop is flooded. > ;-( Just cant win. (but its expected...) > Any How the topic is Birds-mouth joinery. I like > http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page > has helped me out a lot in the past, > Cole post some pictures when you get time, I cant wait to see how your > joinery works out. (even if its practice.) ;-) > talk to you all latter. > C.A.G. > > > From: "Bill Bulkeley" > To: legacy-ornamental-mills@googlegroups.com > Sent: Monday, March 9, 2015 5:26:05 PM > Subject: RE: birdmouth joinery and adhesive > > > Are you sure its nexbond I know maxbond if you have some post a picture > > Bill > > > > From: legacy-ornamental-mills@googlegroups.com > [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole > Sent: Tuesday, 10 March 2015 7:06 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: birdmouth joinery and adhesive > > > > Beautiful day and I thought I would practice my bird mouth joinery .The > directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . > Can this be right, that leaves just knife edge on the stock. I went ahead > and ran some scrap to practice setup and glueup . Also has anyone nexbond > adhesive , hope I am spelling that right I type it on google and nothing. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: birdmouth joinery and adhesive
Hello Bill and Cole. (and everyone else.) It is a nice day out, but now that the snow is melting My shop is flooded. ;-( Just cant win. (but its expected...) Any How the topic is Birds-mouth joinery. I like http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page has helped me out a lot in the past, Cole post some pictures when you get time, I cant wait to see how your joinery works out. (even if its practice.) ;-) talk to you all latter. C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Monday, March 9, 2015 5:26:05 PM Subject: RE: birdmouth joinery and adhesive Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: birdmouth joinery and adhesive
Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
birdmouth joinery and adhesive
Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
