Re: [MBZ] 2007 E350 no start
There is a website to enter your VIN & see if your engine number is one of the 350's effected with balance shaft issues. I was on it today look up an m272 for a friend. Dwight Giles Jr. Wickford RI On Aug 2, 2018 8:20 PM, "Larry Turner via Mercedes" wrote: My 06 E350 (POS) has the same problem. The Fuel Pump/s is bad as per my Indy. I am going to take it to local dealer - they will tow it for free if I let them repair it. I need some clarification on what the warranty covers. Their answer was a little vague so I need to speak to one of Service Advisors in hopes they are familiar with the warranty details. There was also a Class Action suit that forced MB to offer repairs of the E350 affected by the faulty cam sensors. Not sure what the codes are but our problem began when it would not start. It cranks freely but will not fire. Let me know if you want to see the letter MB sent as a reply to my question... LarryT A friend has a 2007 E350 wagon M272 with 140k miles that won't fire, it > just cranks and cranks. I pulled codes and it shows P0011 cam timing, bank > 1 position A (intake); P0271 Powertain, which google says is associated > with the first code; and P0521 Oil pressure switch. > > I checked the cam solenoid magnet and it had the common failure mode of oil > leaking through the connector at the top, so I installed a new one from the > dealer this morning. Still no start. > > Anyone familiar with these engines? I keep reading about balance shaft > problems, but I'm not sure if that will cause a no start like this. > > The P0521 looks like it may actually be a stuck flap in the intake > manifold, but I'm not seeing any association with a no start. This is hard > without a manual or proper diagnostic equipment! > > Any ideas? > > Thanks, > Tom > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 2007 E350 no start
My 06 E350 (POS) has the same problem. The Fuel Pump/s is bad as per my Indy. I am going to take it to local dealer - they will tow it for free if I let them repair it. I need some clarification on what the warranty covers. Their answer was a little vague so I need to speak to one of Service Advisors in hopes they are familiar with the warranty details. There was also a Class Action suit that forced MB to offer repairs of the E350 affected by the faulty cam sensors. Not sure what the codes are but our problem began when it would not start. It cranks freely but will not fire. Let me know if you want to see the letter MB sent as a reply to my question... LarryT A friend has a 2007 E350 wagon M272 with 140k miles that won't fire, it just cranks and cranks. I pulled codes and it shows P0011 cam timing, bank 1 position A (intake); P0271 Powertain, which google says is associated with the first code; and P0521 Oil pressure switch. I checked the cam solenoid magnet and it had the common failure mode of oil leaking through the connector at the top, so I installed a new one from the dealer this morning. Still no start. Anyone familiar with these engines? I keep reading about balance shaft problems, but I'm not sure if that will cause a no start like this. The P0521 looks like it may actually be a stuck flap in the intake manifold, but I'm not seeing any association with a no start. This is hard without a manual or proper diagnostic equipment! Any ideas? Thanks, Tom ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 2007 E350 no start
I’ve had direct experience with failed CPS’ and that’s exactly what they do. Crank all you want, no spark/fuel. -D > On Oct 29, 2017, at 4:18 PM, Max Dillon via Mercedes > wrote: > > That was my first thought as well, based on my vast experience reading stuff > on the web. > -- > Max Dillon > Charleston SC > '87 300TD > '95 E300 > > On October 28, 2017 8:33:46 PM EDT, Dan Penoff via Mercedes > wrote: >> Crankshaft position sensor? While I know you didn’t say there was a >> code for it, that is a very common "cranks but no start” reason on >> earlier model engines. >> > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 2007 E350 no start
That was my first thought as well, based on my vast experience reading stuff on the web. -- Max Dillon Charleston SC '87 300TD '95 E300 On October 28, 2017 8:33:46 PM EDT, Dan Penoff via Mercedes wrote: >Crankshaft position sensor? While I know you didn’t say there was a >code for it, that is a very common "cranks but no start” reason on >earlier model engines. > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 2007 E350 no start
Crankshaft position sensor? While I know you didn’t say there was a code for it, that is a very common "cranks but no start” reason on earlier model engines. I just googled your complaint and this came up: https://repairpal.com/mercedes-benz-e350-2007/problems CPS is one of the common complaints for this problem. I would also be looking at fuel pressure, too. Bad fuel pump can cause similar symptoms. List of fault codes from BW: http://www.benzworld.org/forums/w163-m-class/1696815-list-fault-codes-dtc.html#post5643470 -D > On Oct 28, 2017, at 7:57 PM, Tom Savage via Mercedes > wrote: > > Hi everyone, long time no see. > > A friend has a 2007 E350 wagon M272 with 140k miles that won't fire, it > just cranks and cranks. I pulled codes and it shows P0011 cam timing, bank > 1 position A (intake); P0271 Powertain, which google says is associated > with the first code; and P0521 Oil pressure switch. > > I checked the cam solenoid magnet and it had the common failure mode of oil > leaking through the connector at the top, so I installed a new one from the > dealer this morning. Still no start. > > Anyone familiar with these engines? I keep reading about balance shaft > problems, but I'm not sure if that will cause a no start like this. > > The P0521 looks like it may actually be a stuck flap in the intake > manifold, but I'm not seeing any association with a no start. This is hard > without a manual or proper diagnostic equipment! > > Any ideas? > > Thanks, > Tom > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 2007 E350 no start
Fuel pressure? Mitch ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] 2007 E350 no start
Hi everyone, long time no see. A friend has a 2007 E350 wagon M272 with 140k miles that won't fire, it just cranks and cranks. I pulled codes and it shows P0011 cam timing, bank 1 position A (intake); P0271 Powertain, which google says is associated with the first code; and P0521 Oil pressure switch. I checked the cam solenoid magnet and it had the common failure mode of oil leaking through the connector at the top, so I installed a new one from the dealer this morning. Still no start. Anyone familiar with these engines? I keep reading about balance shaft problems, but I'm not sure if that will cause a no start like this. The P0521 looks like it may actually be a stuck flap in the intake manifold, but I'm not seeing any association with a no start. This is hard without a manual or proper diagnostic equipment! Any ideas? Thanks, Tom ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com