Re: Plausible deniable encryption
On Tue, Dec 18, 2012 at 21:50, Robert Connolly wrote: > Assuming you have read what is out there, I have a technigur When you are locked in a room with men determined to beat you until they get what they want, you will reconsider the wisdom of being unable to prove you don't have what they want.
Re: issue tracker
On Wed, Dec 19, 2012 at 09:43:18PM +, sickm...@lavabit.com wrote: > Hi, > > I have been using OpenBSD for quite a long time, and find it awesome. > I've got some spare time lately and decided to hunt some bugs, but I > don't really know where to start. Any suggestions? > > P.S. Yeah, I know about openbsd-bugs, but I suppose that's not all there > is. > At the moment, bugs@ is all there is. I've not found it very helpful to just stare at random bugs. If they are trivial, they usually get fixed quickly. If they are hard, they are usually not solvable without serious interest in the general area. And at that point, you don't need to ask for tasks. There are (almost) no "middle-ground" bugs. If you use OpenBSD, is there really no part that bothers *you*? Try to identify and work on these first.
Xfce4 and ctrl:swapcaps not working
Hello Misc, I am running -current (amd64) on a Lenovo w500. I start Xfce4 from the command line with startx. I have added: exec /usr/local/bin/startxfce4 to ~/.xinitrc. Everything comes up nicely, but I cannot swap the Control_L and CAPS_LOCK automatically at startup. I can swap them from an xterm command line using setxkbmap -option ctrl:swapcaps and xmodmap ~/.Xmodmap Both of these methods do work, but I want it to happen automatically when I launch X. I have gone to the "Session and Startup" dialog and created an entry for the setxkbmap command method. The command executes and returns 0. I have added: XKBOPTIONS="ctrl:swapcaps" to /etc/default/keyboard. This doesn't work either. I have instrumented /etc/xdg/xfce4/xinitrc to verify that # load local modmap test -r $HOME/.Xmodmap && xmodmap $HOME/.Xmodmap in that file is executed and returns 0 Googling finds the solutions described above. These aren't working for me. At this point I am out of ideas. I am resisting writing an "xorg.conf" file. Am I down to that? Clue sticks gladly accepted. Thanks to all, Ray
issue tracker
Hi, I have been using OpenBSD for quite a long time, and find it awesome. I've got some spare time lately and decided to hunt some bugs, but I don't really know where to start. Any suggestions? P.S. Yeah, I know about openbsd-bugs, but I suppose that's not all there is.
Re: Strange behaviour on OpenBSD 5.2 and usb disk
Kenneth R Westerback wrote:
> On Wed, Dec 19, 2012 at 05:23:55PM -0300, Marcos Laufer wrote:
>
>> This is a DL360G3 running OpenBSD 5.2 . I can't use a "WD My Passport"
>> USB disk, i get input/output error, here is what i got:
>>
>> # dmesg
>> OpenBSD 5.2 (GENERIC) #0: Fri Dec 14 23:58:18 ART 2012
>> root@:/u/system/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
>> real mem = 3220738048 (3071MB)
>> avail mem = 3157274624 (3011MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf,
>> SMBIOS rev. 2.3 @ 0xec000 (42 entries)
>> bios0: vendor HP version "P31" date 01/28/2004
>> bios0: HP ProLiant DL360 G3
>> acpi0 at bios0: rev 0
>> acpi0: sleep states S0 S4 S5
>> acpi0: tables DSDT FACP APIC SPCR
>> acpi0: wakeup devices
>> acpitimer0 at acpi0: 3579545 Hz, 32 bits
>> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: apic clock running at 133MHz
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 11, 16 pins
>> ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
>> ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
>> ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (PCI1)
>> acpiprt2 at acpi0: bus 4 (PCI2)
>> acpicpu0 at acpi0
>> acpitz0 at acpi0: critical temperature is 31 degC
>> bios0: ROM list: 0xc/0x8000 0xc8000/0x4000 0xee000/0x2000!
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
>> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
>> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
>> pci1 at pchb2 bus 1
>> bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2
>> (0x1002): apic 3 int 14, address 00:0f:20:96:8c:de
>> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
>> vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01:
>> apic 3 int 15
>> ciss0: 1 LD, HW rev 1, FW 2.36/2.36
>> scsibus0 at ciss0: 1 targets
>> sd0 at scsibus0 targ 0 lun 0: SCSI0 0/direct
>> fixed
>> sd0: 17359MB, 512 bytes/sector, 35553120 sectors
>> "Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
>> "Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
>> piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
>> iic0 at piixpm0
>> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2100CL2.5
>> spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
>> spdmem2 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5
>> spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5
>> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
>> atapiscsi0 at pciide0 channel 0 drive 0
>> scsibus1 at atapiscsi0: 2 targets
>> cd0 at scsibus1 targ 0 lun 0: ATAPI 5/cdrom
>> removable
>> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1
>> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2
>> int 10, version 1.0, legacy support
>> pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
>> pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
>> pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
>> pci2 at pchb5 bus 4
>> bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2
>> (0x1002): apic 3 int 13, address 00:0f:20:96:8c:e1
>> brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
>> usb0 at ohci0: USB revision 1.0
>> uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at mainbus0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> mtrr: Pentium Pro MTRR support
>> umass0 at uhub0 port 4 configuration 1 interface 0 "Western Digital My
>> Passport 0748" rev 2.10/10.15 addr 2
>> umass0: using SCSI over Bulk-Only
>> scsibus2 at umass0: 2 targets, initiator 0
>> sd1 at scsibus2
Re: snort inline
Another update in case there is any interest in running divert-packet along with NATing. I ditched snort and wrote a little divert program based on the man page to test easier. I can now see that with nat as well as divert-packet on egress rule on external interface the packet will get NATed and go out. A reply will come back to external interface and then get diverted again and never make it to the client. I am as sure as I can be at this point that you cannot divert packets from a NATed client. Justin -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Justin Sent: Sunday, November 25, 2012 4:37 PM To: misc@openbsd.org Subject: Re: snort inline Quick update. It seems to be a nat problem. If I just test by pinging either the 192.168.1.32 interface or the 192.168.0.13 interface it works fine and snort sees the packets. Its only when the traffic is NATed that it fails. -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Justin Sent: Saturday, November 24, 2012 2:21 PM To: misc@openbsd.org Subject: snort inline Anyone running snort 2.9.3.1p0 in inline / IPS mode with 5.2 cuurent? From what I read it's possible with pf divert functionality. This is what I'm doing for testing in pf using simple ping Gateway info internal interface fxp0 - 192.168.1.32 external interface bce0 - 192.168.0.13 Running snort via this cmd line snort --daq-dir /usr/local/lib/daq -Q --daq ipfw -c /etc/snort/snort.conf -v Internal interface is in the skip list hence no active rules for it Pfctl -sr pass out on bce0 all flags S/SA scrub (reassemble tcp) nat-to (bce0:0) pass in on bce0 inet all flags S/SA scrub (reassemble tcp) This works as expected, I can ping 8.8.8.8 and since no diverting is active snort sees nothing I change rules to this to start diverting to snort Pfctl -sr pass out on bce0 all flags S/SA scrub (reassemble tcp) divert-packet port 8000 nat-to (bce0:0) pass in on bce0 inet all flags S/SA scrub (reassemble tcp) Now internal interface sees outgoing ping tcpdump -n -i fxp0 -n host 8.8.8.8 192.168.1.32 > 8.8.8.8: icmp: request: External interface shows it going out and coming back 192.168.0.13 > 8.8.8.8: icmp: request: 8.8.8.8 > 192.168.0.13: icmp: reply: Snort sees it twice, external interface first 192.168.0.13 -> 8.8.8.8 ICMP TTL:63 TOS:0x0 ID:0 IpLen:20 DgmLen:84 DF Type:8 Code:0 ID:64870 Seq:2 ECHO =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ 8.8.8.8 -> 192.168.1.32 ICMP TTL:48 TOS:0x20 ID:64655 IpLen:20 DgmLen:84 Type:0 Code:0 ID:52297 Seq:2 ECHO REPLY =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ Client @ 192.168.1.32 never sees reply. Any comments or suggestions? Justin [demime 1.01d removed an attachment of type application/pkcs7-signature which had a name of smime.p7s] [demime 1.01d removed an attachment of type application/pkcs7-signature which had a name of smime.p7s] [demime 1.01d removed an attachment of type application/pkcs7-signature which had a name of smime.p7s]
Re: Panic at pmap_remove_ptes, 5.2/i386
On 2012-12-18, Marcin wrote: > Today a member of my 2 machines firewall cluster running 5.2 panicked > with following info (screenshot at http://tinypic.com/r/11t7nrl/6): > > panic: pmap_remove_ptes: unmanaged page marked PG_PVLIST, va = > 0x3c005000, pa = 0xf000 > > The machine, along with its identical twin, runs a standard suite of: > PF (including carp and pfsync), relayd and bgpd. > It is the 5th panic since the cluster was commisioned over a week ago, > all of them happened in the same function pmap_remove_ptes. > > I found an older thread with Stuart reporting similar issue here > http://marc.info/?l=openbsd-tech&m=132593610913252 Frequent is kind-of good ;) I had a few crashes close together but then nothing (and I've moved most of those boxes to amd64 by now). It was suggested that I run with kern.pool_debug=1 (which will be disabled by default on release kernels) and try the "slow recycle" diff, I do not have a copy of that diff any more but somebody reading might do. Really you'll want some way to log DDB output (serial console preferably, unless you are lucky and the dmesg buffer survives a reboot) and at least run "show all pools" as well as the usual trace / ps. If you have a crash dump (look in /var/crash) that may possibly be of use to someone too.
Re: Strange behaviour on OpenBSD 5.2 and usb disk
On Wed, Dec 19, 2012 at 05:23:55PM -0300, Marcos Laufer wrote:
> This is a DL360G3 running OpenBSD 5.2 . I can't use a "WD My Passport"
> USB disk, i get input/output error, here is what i got:
>
> # dmesg
> OpenBSD 5.2 (GENERIC) #0: Fri Dec 14 23:58:18 ART 2012
> root@:/u/system/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 3220738048 (3071MB)
> avail mem = 3157274624 (3011MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf,
> SMBIOS rev. 2.3 @ 0xec000 (42 entries)
> bios0: vendor HP version "P31" date 01/28/2004
> bios0: HP ProLiant DL360 G3
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S4 S5
> acpi0: tables DSDT FACP APIC SPCR
> acpi0: wakeup devices
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 11, 16 pins
> ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
> ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
> ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PCI1)
> acpiprt2 at acpi0: bus 4 (PCI2)
> acpicpu0 at acpi0
> acpitz0 at acpi0: critical temperature is 31 degC
> bios0: ROM list: 0xc/0x8000 0xc8000/0x4000 0xee000/0x2000!
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
> pci1 at pchb2 bus 1
> bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2
> (0x1002): apic 3 int 14, address 00:0f:20:96:8c:de
> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
> vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01:
> apic 3 int 15
> ciss0: 1 LD, HW rev 1, FW 2.36/2.36
> scsibus0 at ciss0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: SCSI0 0/direct
> fixed
> sd0: 17359MB, 512 bytes/sector, 35553120 sectors
> "Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
> "Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
> piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2100CL2.5
> spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
> spdmem2 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5
> spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5
> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: ATAPI 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2
> int 10, version 1.0, legacy support
> pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
> pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
> pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
> pci2 at pchb5 bus 4
> bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2
> (0x1002): apic 3 int 13, address 00:0f:20:96:8c:e1
> brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 4 configuration 1 interface 0 "Western Digital My
> Passport 0748" rev 2.10/10.15 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: SCSI4 0/direct
> fixed
> sd1: 953837MB, 512 bytes/sector, 1953458176 sectors
> ses0 at scsibus2 targ 1 lun 1: SCSI4 13
Re: Can't back to command console after exit X-windows
On Wed, Dec 19, 2012 at 10:55:47PM +0800, livemoon wrote: > Hi, I installed 5.2 in my Fujitsu ph521 laptop. It use AMD Brazos E350. It > can use X-windows by radeon driver. But the problem is: when I exit my cwm, > the screen become white, and cannot back to console by type any key. > How to fix it? > Thanks! This is a known problem with the radeon driver. It fails to properly restore text mode. The problem isn't seen on Linux because on Linux the radeon driver relies on kernel-mode switching. I.e. the Linux kernel switches the graphics hardware back into text mode, instead of the radeon driver doing it (which is known as user-mode switching). I am seeing this problem also on a thinkpad x131e, which has an AMD E450. To fix it, we'll need to either fix the broken user-mode VT switching code written for newer radeon chips in the radeon driver (user-mode switching code is not maintained anymore at x.org so they probably won't fix it for us), or implement kernel mode switching in OpenBSD which isn't trivial at all.
Strange behaviour on OpenBSD 5.2 and usb disk
This is a DL360G3 running OpenBSD 5.2 . I can't use a "WD My Passport"
USB disk, i get input/output error, here is what i got:
# dmesg
OpenBSD 5.2 (GENERIC) #0: Fri Dec 14 23:58:18 ART 2012
root@:/u/system/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 3220738048 (3071MB)
avail mem = 3157274624 (3011MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf, SMBIOS
rev. 2.3 @ 0xec000 (42 entries)
bios0: vendor HP version "P31" date 01/28/2004
bios0: HP ProLiant DL360 G3
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 4 (PCI2)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 31 degC
bios0: ROM list: 0xc/0x8000 0xc8000/0x4000 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb2 bus 1
bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2
(0x1002): apic 3 int 14, address 00:0f:20:96:8c:de
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: apic
3 int 15
ciss0: 1 LD, HW rev 1, FW 2.36/2.36
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI0 0/direct
fixed
sd0: 17359MB, 512 bytes/sector, 35553120 sectors
"Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
"Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2100CL2.5
spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
spdmem2 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5
spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2
int 10, version 1.0, legacy support
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci2 at pchb5 bus 4
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2
(0x1002): apic 3 int 13, address 00:0f:20:96:8c:e1
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 4 configuration 1 interface 0 "Western Digital My Passport
0748" rev 2.10/10.15 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: SCSI4 0/direct fixed
sd1: 953837MB, 512 bytes/sector, 1953458176 sectors
ses0 at scsibus2 targ 1 lun 1: SCSI4 13/enclosure
services fixed
ses0: unable to read enclosure configuration
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (dbca6b23415fa5d6.a) swap on sd0b dump on sd0b
#
# disklabel sd1
# /dev/rsd1c:
type:
Re: snapshot: base52.tgz -> clamav -> Heuristics.Broken.Executable
2012/12/19, MERIGHI Marcus : > Hello, > > just wanted to let you know: -current base52.tgz is recognised by clamav > as "Heuristics.Broken.Executable". This bit me on a squid->havp > installation while downloading snapshots. http://www.clamav.net/lang/en/sendvirus/submit-fp/ Anti-virus software sucks.
ospf Linkstate unknown
Hi,
I'd like to ask why I get Linkstate unknown on interfaces em0/em1:
# ospfctl s i
Interface AddressState HelloTimer LinkstateUptime
nc ac
gre0 zz.zz.zz.zz/32 P2P00:00:02 active04:34:441 1
em1xx.xx.xx.xx/24 DR 00:00:04 unknown 00:06:31
1 1
em0yy.yy.yy.yy/29 DR 00:00:01 unknown03w5d22h
1 1
# ospfctl s n
zz.zz.zz.zz1 FULL/P2P 00:00:32 zz.zz.zz.zz gre0
04:53:13
xx.xx.xx.xx1 FULL/BCKUP 00:00:35 xx.xx.xx.xx em1
00:25:00
yy.yy.yy.yy1 FULL/BCKUP 00:00:31 yy.yy.yy.yy em0
03w1d06h
em0: flags=8843 mtu 1500
lladdr 52:54:00:25:e7:a8
description: External
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet xx.xx.xx.x1 netmask 0xfff8 broadcast xx.xx.xx.xx
inet6 fe80::5054:ff:fe25:e7a8%em0 prefixlen 64 scopeid 0x1
inet xx.xx.xx.x2 netmask 0x
em1: flags=8843 mtu 1500
lladdr 52:54:00:62:d4:cc
description: other VLAN24
priority: 0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet yy.yy.yy.yy netmask 0xff00 broadcast yy.yy.yy.yy
inet6 fe80::5054:ff:fe62:d4cc%em1 prefixlen 64 scopeid 0x2
ospfd.conf:
router-id xx.xx.xx.x1
fib-update yes
stub router no
spf-delay 1
spf-holdtime 5
hello-interval 10
metric 1
retransmit-interval 5
router-dead-time 40
router-priority 1
transmit-delay 1
redistribute static
redistribute connected
...+ passwords
# CORE
area 0.0.0.0 {
interface em0 {
auth-type crypt
auth-md $HER_core_id $core_pass
auth-md-keyid $core_id
}
}
# OTHER AREA
area 0.0.0.1 {
stub
interface em1 {
auth-type crypt
auth-md $HER_other_id $other_pass
auth-md-keyid $other_id
}
}
... other areas
regards,
Giannis
Re: snapshot: base52.tgz -> clamav -> Heuristics.Broken.Executable
> > From: Stuart Henderson > Sent: Wed Dec 19 16:45:56 CET 2012 > To: > Subject: Re: snapshot: base52.tgz -> clamav -> Heuristics.Broken.Executable > > > On 2012-12-19, MERIGHI Marcus wrote: > > Hello, > > > > just wanted to let you know: -current base52.tgz is recognised by clamav > > as "Heuristics.Broken.Executable". This bit me on a squid->havp > > installation while downloading snapshots. > > I think this should be reported to ClamAV rather than OpenBSD. > I also think so : Many anti-viral software find compressed binary file as Heuristics viruses. Cordialement Francois Pussault 3701 - 8 rue Marcel Pagnol 31100 Toulouse France +33 6 17 230 820 +33 5 34 365 269 fpussa...@contactoffice.fr
Re: snapshot: base52.tgz -> clamav -> Heuristics.Broken.Executable
On 2012-12-19, MERIGHI Marcus wrote: > Hello, > > just wanted to let you know: -current base52.tgz is recognised by clamav > as "Heuristics.Broken.Executable". This bit me on a squid->havp > installation while downloading snapshots. I think this should be reported to ClamAV rather than OpenBSD.
snapshot: base52.tgz -> clamav -> Heuristics.Broken.Executable
Hello,
just wanted to let you know: -current base52.tgz is recognised by clamav
as "Heuristics.Broken.Executable". This bit me on a squid->havp
installation while downloading snapshots.
Bye, Marcus
OpenBSD 5.2-current (GENERIC) #5: Wed Dec 12 23:33:03 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3500+ ("AuthenticAMD" 686-class, 512KB L2
cache) 2.22 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,SSE3,CX16,LAHF,SVM,EAPICSP,AMCR8
real mem = 1055387648 (1006MB)
avail mem = 1027170304 (979MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/06, BIOS32 rev. 0 @ 0xf1f40, SMBIOS
rev. 2.3 @ 0xf (52 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS M2N8L ACPI BIOS Revision
0203" date 06/23/2006
bios0: ASUSTek Computer INC. M2N8L
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices HUB0(S5) USB0(S4) USB2(S4) AZAD(S5) MMAC(S5) MMCI(S5)
UAR1(S5) PS2M(S4) PS2K(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf000, bus 0-255
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 75 degC
acpibtn0 at acpi0: PWRB
aibs0 at acpi0: RTMP RVLT RFAN
aibs0: FSIF: misformed package: 3/5, assume 5
bios0: ROM list: 0xc/0xec00 0xd/0x4000! 0xd4000/0x1000 0xd5000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
"NVIDIA C51 Host" rev 0xa2 at pci0 dev 0 function 0 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 2 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 3 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 4 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 6 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 7 not configured
vga1 at pci0 dev 5 function 0 "NVIDIA GeForce 6150" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"NVIDIA MCP51 Host" rev 0xa2 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP51 ISA" rev 0xa3
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP51 SMBus" rev 0xa3
iic0 at nviic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5
iic1 at nviic0
"NVIDIA MCP51 Memory" rev 0xa3 at pci0 dev 10 function 2 not configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP51 USB" rev 0xa3: apic 2 int 20,
version 1.0, legacy support
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP51 USB" rev 0xa3: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP51 IDE" rev 0xa1: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP51 SATA" rev 0xa1: DMA
pciide1: using apic 2 int 20 for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0:
wd1: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ppb0 at pci0 dev 16 function 0 "NVIDIA MCP51 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
"VIA VT6306 FireWire" rev 0xc0 at pci1 dev 3 function 0 not configured
fxp0 at pci1 dev 9 function 0 "Intel 8255x" rev 0x0c, i82550: apic 2 int 16,
address 00:02:b3:bc:1a:53
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
em0 at pci1 dev 14 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
17, address 00:1b:21:2a:14:ba
azalia0 at pci0 dev 16 function 1 "NVIDIA MCP51 HD Audio" rev 0xa2: apic 2 int
20
azalia0: codecs: Realtek ALC861
audio0 at azalia0
nfe0 at pci0 dev 20 function 0 "NVIDIA MCP51 LAN" rev 0xa3: apic 2 int 20,
address 00:17:31:92:e0:1e
nfe0: no PHY found!
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
DH-F2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdispla
Can't back to command console after exit X-windows
Hi, I installed 5.2 in my Fujitsu ph521 laptop. It use AMD Brazos E350. It can use X-windows by radeon driver. But the problem is: when I exit my cwm, the screen become white, and cannot back to console by type any key. How to fix it? Thanks! -- Blog Site: livemoon.org Twitter: mwjpiero ·Çµ±¡ÎÞÒÔÃ÷Ö¾£¬·ÇÄþ¾²ÎÞÒÔÖÂÔ¶
Re: Plausible deniable encryption
Or party vans are sent much earlier out nowadays On Wed, Dec 19, 2012 at 1:04 PM, Nick Holland wrote: > On 12/19/12 00:50, Robert Connolly wrote: > > Assuming you have read what is out there, I have a technigur > > > > and the margin was too small...
Re: Plausible deniable encryption
On Wed, Dec 19, 2012 at 07:04:49AM -0500, Nick Holland wrote: > On 12/19/12 00:50, Robert Connolly wrote: > > Assuming you have read what is out there, I have a technigur > > > > and the margin was too small... I think he could plausibly deny that...
Re: Plausible deniable encryption
On 12/19/12 00:50, Robert Connolly wrote: > Assuming you have read what is out there, I have a technigur > and the margin was too small...
