Re: [ns] UMTS on NS-2
Hi! Did you remember to recompile ns-2, as the instructions imply? Best wishes, -- Mats Folke, M.Sc., Lic.Eng. Research Engineer Ericsson AB Office: +46 10 7171385 Ericsson Research Fax: +46 920 99621 P.O. Box 920Mobile: +46 76 1271385 SE-971 28 LuleƄ Sweden -Original Message- From: dka...@gmail.com [mailto:dka...@gmail.com] Sent: den 15 augusti 2009 22:48 To: Mats Folke Subject: Re: UMTS on NS-2 I recently installed ns-2.30 and added the required eurane patch to run UMTS on it, however when i try to run the test_tcp.tcl file or any other file i get the following error: any suggestions as to why this is happening? d...@dk-laptop:~$ ns test1.tcl (_o3 cmd line 1) invoked from within _o3 cmd create-Umtsnode invoked from within catch $self cmd $args ret invoked from within if [catch $self cmd $args ret] { set cls [$self info class] global errorInfo set savedInfo $errorInfo error error when calling class $cls: $args $... (procedure _o3 line 2) (SplitObject unknown line 2) invoked from within $ns create-Umtsnode invoked from within set rnc [$ns create-Umtsnode] (file test1.tcl line 28) d...@dk-laptop:~$ Mats Folke-2 wrote: Hi! First of all, please post your questions to the mailing list. It adds value to the list. Yes, you can have multiple versions of ns running in parallel, but you need to be very careful how you set up your paths. Please search the web for setting up paths in the shell. That will search your other problems you wrote about. Best regards, Mats Syed Faraz Hasan wrote: Dear Mats, Please advise me, can I have both NS-2.33 and NS-2.30 at the same time? Will they both ok if they coexist or do I need to get rid of one for th other? Thanks a lot in anticipation Faraz From: ns-users-boun...@isi.edu [ns-users-boun...@isi.edu] On Behalf Of Mats Folke [mats.fo...@ericsson.com] Sent: Tuesday, March 24, 2009 12:47 AM To: ns-users@isi.edu Subject: Re: [ns] UMTS on NS-2 Hi! Syed Faraz Hasan wrote: Hello! Reference to my previous email about UMTS implementation on NS-2. Can some one tell me if I need a separate patch for UMTS while working on NS-2.33? If so, where can I download it from? I have seen http://eurane.ti-wmc.nl/eurane/, patch available there is in diff.gz format. I am a newbie to open suse linux, I think I should be after something .tar.gz? There is currently no patch for ns-2.33 and since Eurane is not supported anymore, there probably never will be. You have two options. 1) Download ns-2.30 and patch with existing eurane patch. If you need something introduced in later versions of ns-2, you cannot use it. 2) Patch an existing ns-2.33 with the eurane patch for ns-2.30. This could result in difficulties which you must manually resolve. The patching procedure is documented in the manual, section 2.3. A patch is distributed in something called a diff-file, hence the file extension .diff. Gzip then adds the extension .gz. Before pathing the .diff.gz file needs to be uncompressed using gunzip. The result will be the diff-file. Anyway, when I download and open eurane1.12.diff.gz, it gives an error associated help application does not exist! This patch is available for NS-2.30, I am using 2.33. What gives an error? A patch file should not be opened, see the eurane manual for correct usage, or the patch man page, or google for unix command patch or similar. Also, what is CLEAN NS-2.3 A clean version is a version not messed up by changes, builds etc. A fresh downloaded version is a clean version. I downloaded test_tcp.tcl (UMTS implementation on NS-2 test run), without installing any patch on my existing NS-2.33. When I execute it, it says (_o3 cmd line 1) invoked from within _o3 cmd create-Umtsnode . . . $ns create-Umtsnode invoked from within set rnc [$ns create-Umtsnode] file umtstcp.tcl line 42 This is because ns-2 (without the patch) does not understand the instructions in those tcl files. You need the patch to be able to run the tcl files. Regards, -- Mats Folke, M.Sc., Lic.Eng. Research Engineer Ericsson AB Office: +46 10 7171385 Ericsson Research Fax: +46 920 99621 P.O. Box 920Mobile: +46 76 1271385 SE-971 28 LuleƄ Sweden Quoted from: http://www.nabble.com/UMTS-on-NS-2-tp22659223p22703758.html
Re: [ns] awk script for calculating end to end delay in a wired-wireless scenario
hi, Because of inconsistencies in the trace format, sometimes the node id is given in a hierarchical way (eg, 0.0.1) and other times in a decimal way (hierarchical addresses normally allocate bits as 10.11.11, so 1.0.1 becomes 4194305). It's generally simplest to have a look through your trace file and figure out which id is being given to which node under which circumstances. (eg., sending from a wired node to a wired node seems to result in hierarchical addresses, but receiving at a wireless node seems to result in the confusing decimal format). Here's what I use for calculating loss, it should get you started and make calculating throughput and delay easier. # #Hierarchical routing is used with bits allocated as 10.11.11, # #addresses must be converted# #0.0.0 = 0 (our server node) # #1.0.0 = 4194304(our Access point node) # #1.0.1 = 4194305(our destination node) # # BEGIN{totaltime=input;} /^+/ /0.0.0.0/ /1.0.1.0/ /Multimedia/{ wtimefield=2 wpacketidfield=12 loss[int($wtimefield)]++; packet[$wpacketidfield]=1; } /^r/ / -Is 0.0/ / -Id 4194305.0/ /AGT/ /Multimedia/ { if(timefield==0 ||packetidfield==0) { for(i=1; i=NF; i++) { if($i==-t) timefield=i+1; if($i==-Ii) packetidfield=i+1; } } loss[int($timefield)]--; packet[$packetidfield] = 0; } END{ for(i=0;itotaltime;i++) print i loss[i]*1000*8; } Good Luck, David McMullin Dublin City University. 2009/8/15 Oladapo Oluwadiya ooluwad...@yahoo.com: hello, does anyone have the awk script to calculate delay,throughput,packet loss in a mixed scenario i.e. wired-wireless scenario? i will really appreciate it. regards.
[ns] linking tcl with c++
hi friends.. i have a cpp file of RTRAgent of odmrp protocol. when i implement it ,an error occurs as invalid command name, how should i link c++ with tcl wit regards sangeetha.k
Re: [ns] Segmentation fault with wireless simulation
in your script you have to change ifq value Queue/DropTail/PriQueue by CMUPriQueue #Define wirleess scenario parameters set val(chan) Channel/WirelessChannel; set val(prop) Propagation/TwoRayGround1; set val(netif) Phy/WirelessPhy; set val(mac) Mac/802_11; set val(ifq) CMUPriQueue ; set val(ll) LL; set val(ant) Antenna/OmniAntenna; set val(ifqlen) 50; set val(nn) 5; set val(rp) DSR; set val(x) 500; set val(y) 400; set val(stop) 150; set ns [new Simulator] set tracefd [open problem1Trace.tr w] set windowVsTime2 [open problem1Win.tr w] set namfd [open problem1Namtrace.nam w] $ns trace-all $tracefd $ns namtrace-all-wireless $namfd $val(x) $val(y) set topo [new Topography] $topo load_flatgrid $val(x) $val(y) create-god $val(nn) $ns node-config -adhocRouting $val(rp) \ -llType $val(ll) \ -macType $val(mac) \ -ifqType $val(ifq) \ -ifqLen $val(ifqlen) \ -antType $val(ant) \ -propType $val(prop) \ -phyType $val(netif) \ -channelType $val(chan) \ -topoInstance $topo \ -agentTrace ON \ -routerTrace ON\ -macTrace OFF \ -movementTrace ON for {set i 0} {$i $val(nn) } {incr i} { set node_($i) [$ns node] } $node_(0) set X_ 5.0 $node_(0) set Y_ 5.0 $node_(0) set Z_ 0.0 $node_(1) set X_ 490.0 $node_(1) set Y_ 285.0 $node_(1) set Z_ 0.0 $node_(2) set X_ 150.0 $node_(2) set Y_ 240.0 $node_(2) set Z_ 0.0 $node_(3) set X_ 495.0 $node_(3) set Y_ 100 $node_(3) set Z_ 0.0 $node_(4) set X_ 495 $node_(4) set Y_ 395 $node_(4) set Z_ 0.0 $ns at 10.0 $node_(0) setdest 250.0 250.0 3.0 $ns at 15.0 $node_(1) setdest 45.0 285.0 5.0 $ns at 20.0 $node_(2) setdest 480.0 300.0 5.0 $ns at 25.0 $node_(3) setdest 50.0 150.0 5.0 $ns at 15.0 $node_(4) setdest 50.0 50.0 3.0 #set TCP Connection between node_(0) and node_(1) set tcp0 [new Agent/TCP/Newreno] $tcp0 set class_ 2 set sink0 [new Agent/TCPSink] $ns attach-agent $node_(0) $tcp0 $ns attach-agent $node_(1) $sink0 $ns connect $tcp0 $sink0 set ftp [new Application/FTP] $ftp attach-agent $tcp0 $ns at 10.0 $ftp start #set TCP Connection between node_(0) and node_(4) set tcp1 [new Agent/TCP/Newreno] $tcp1 set class_ 2 set sink1 [new Agent/TCPSink] $ns attach-agent $node_(0) $tcp1 $ns attach-agent $node_(4) $sink1 $ns connect $tcp1 $sink1 set ftp1 [new Application/FTP] $ftp1 attach-agent $tcp1 $ns at 12.0 $ftp1 start #set TCP Connection between node_(3) and node_(2) set tcp2 [new Agent/TCP/Newreno] $tcp2 set class_ 2 set sink2 [new Agent/TCPSink] $ns attach-agent $node_(3) $tcp2 $ns attach-agent $node_(2) $sink2 $ns connect $tcp2 $sink2 set ftp2 [new Application/FTP] $ftp2 attach-agent $tcp2 $ns at 15.0 $ftp2 start proc plotWindow {tcpSource file} { global ns set time 0.01 set now [$ns now] set cwnd [$tcpSource set cwnd_] puts $file $now $cwnd $ns at [expr $now+$time] plotWindow $tcpSource $file } $ns at 10.1 plotWindow $tcp0 $windowVsTime2 #define node position in NAM for {set i 0} {$i $val(nn)} {incr i} { $ns initial_node_pos $node_($i) 30 } for {set i 0} {$i $val(nn) } {incr i} { $ns at $val(stop) $node_($i) reset; } $ns at $val(stop) $ns nam-end-wireless $val(stop) $ns at $val(stop) stop $ns at 150.01 puts \end simulation\ ; $ns halt proc stop {} { global ns tracefd namfd $ns flush-trace close $tracefd close $namfd } $ns run #Good Luck -- View this message in context: http://www.nabble.com/Segmentation-fault-with-wireless-simulation-tp14679409p25017741.html Sent from the ns-users mailing list archive at Nabble.com.