Re: A few newbie questions
On Wed, May 28, 2008 at 05:32:03AM -0700, jergendutch wrote: Hello, I have iscsi setup on some boxes. They can all mount a central target in succession but not at the same time. This is fine, I have installed GFS to make this work. I read somewhere (and this is where I need the help) that open-iscsi limits the number of connections per lun to one, and I need to increase this to the number of hosts. Can anyone tell me where this is, I cannot find it any more. Not sure where you read it, but that is false. The default LUN max is 512. My second question is about startup. At the moment I start iscsi, then I run the discovery command, then restart iscsi to see the disk. This seems wrong. Is there a better way? When you run the discovery command the results are cached. When you log-in the session is also cached. So you init script should take advantage of that and automaticly log-in to those targets. You did log-in to those targets after the discovery, right? --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: open-iscsi with Promise M500i dropping session / Nop-out timedout
On Wed, May 28, 2008 at 03:34:37PM +0300, Pasi Kärkkäinen wrote: Hello list! Unfortunately I had to upgrade a server running CentOS 4.6 (sfnet initiator) to CentOS 5.1 (open-iscsi initiator) and now I have some problems with it (then again I was expecting it.. I hate this Promise array). /var/log/messages: May 28 15:14:16 server1 multipathd: path checkers start up May 28 15:15:39 server1 iscsid: Nop-out timedout after 10 seconds on connection 14:0 state (3). Dropping session. May 28 15:15:42 server1 iscsid: connection14:0 is operational after recovery (2 attempts) May 28 15:19:21 server1 kernel: sd 16:0:0:0: SCSI error: return code = 0x0002 May 28 15:19:21 server1 kernel: end_request: I/O error, dev sdd, sector 190057296 May 28 15:19:21 server1 kernel: device-mapper: multipath: Failing path 8:48. May 28 15:19:21 server1 kernel: sd 16:0:0:0: SCSI error: return code = 0x0002 May 28 15:19:21 server1 kernel: end_request: I/O error, dev sdd, sector 190057552 May 28 15:19:21 server1 kernel: sd 16:0:0:0: SCSI error: return code = 0x0002 May 28 15:19:21 server1 kernel: end_request: I/O error, dev sdd, sector 190057560 May 28 15:19:21 server1 multipathd: sdd: readsector0 checker reports path is down May 28 15:19:21 server1 multipathd: checker failed path 8:48 in map promise_test1 May 28 15:19:21 server1 multipathd: promise_test1: remaining active paths: 1 May 28 15:19:21 server1 iscsid: Nop-out timedout after 10 seconds on connection 14:0 state (3). Dropping session. May 28 15:19:25 server1 iscsid: connection14:0 is operational after recovery (2 attempts) May 28 15:19:26 server1 multipathd: sdd: readsector0 checker reports path is up May 28 15:19:26 server1 multipathd: 8:48: reinstated May 28 15:19:26 server1 multipathd: promise_test1: remaining active paths: 2 May 28 15:19:26 server1 multipathd: promise_test1: switch to path group #1 $ iscsiadm -m node --targetname name | grep timeo node.session.timeo.replacement_timeout = 15 node.session.err_timeo.abort_timeout = 10 node.session.err_timeo.reset_timeout = 30 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.auth_timeout = 45 node.conn[0].timeo.active_timeout = 5 node.conn[0].timeo.idle_timeout = 60 node.conn[0].timeo.ping_timeout = 5 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 10 node.session.timeo.replacement_timeout = 15 node.session.err_timeo.abort_timeout = 10 node.session.err_timeo.reset_timeout = 30 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.auth_timeout = 45 node.conn[0].timeo.active_timeout = 5 node.conn[0].timeo.idle_timeout = 60 node.conn[0].timeo.ping_timeout = 5 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 10 Basicly those Nop-out timedout errors keep showing up all the time when there is IO going on.. and if I have dd if=/dev/mpath of=/dev/null running You can expand the timeout to a higher value? 30 seconds ? Also you might want to limit the node.session.queue_depth to a lower value as well. IO rates seem to go down every 20 seconds or so and stay stalled (at 0) for 5 seconds or so.. weird. That could be due to the NOP not getting its response and stalling the session until it receives the response. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: A few newbie questions
On 28 Mai, 16:13, Konrad Rzeszutek [EMAIL PROTECTED] wrote: On Wed, May 28, 2008 at 05:32:03AM -0700, jergendutch wrote: Hello, I have iscsi setup on some boxes. They can all mount a central target in succession but not at the same time. This is fine, I have installed GFS to make this work. I read somewhere (and this is where I need the help) that open-iscsi limits the number of connections per lun to one, and I need to increase this to the number of hosts. Can anyone tell me where this is, I cannot find it any more. Not sure where you read it, but that is false. The default LUN max is 512. Okay, so I have another problem then. Damn :/ My second question is about startup. At the moment I start iscsi, then I run the discovery command, then restart iscsi to see the disk. This seems wrong. Is there a better way? When you run the discovery command the results are cached. When you log-in the session is also cached. So you init script should take advantage of that and automaticly log-in to those targets. You did log-in to those targets after the discovery, right? I don't require login for the targets, they are on a private subnet. I will try again to see if they are cached (centos 5.1) --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
FreeBSD initiator, Solaris target
Has anyone set up a FreeBSD 7 initiator to mount a Solaris 10 target? I spent the better part of a day trying to make it go and failed. I just want to know if anyone on this list has succeeded. -- Outside of a dog, a book is a man's best friend. Inside of a dog, it is too dark to read. -- Groucho Marx --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Design Questions
Arturo 'Buanzo' Busleiman wrote: So, the obvious question here: I want to store the data in the SAN. Should I get my sessions running in the host, or inside each virtual machine? If this is not the correct group to ask this question, I'd gladly accept suggestions for other groups! :) --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Help! On Ubuntu or RHEL 5.1 client I always get: iscsiadm: discovery session to [IP] received unexpected opcode 0x20
Has anyone experienced this error? I have no firewall, no SELinux running, etc. The iSCSI target should be fine as windows clients were able to utilize the sanfly targets before (or ones like it). Is there a howto or directions I can follow? Can I not do a discovery and just connect to it directly? What commands should I be using? I followed the directions at: http://www.cyberciti.biz/faq/howto-setup-debian-ubuntu-linux-iscsi-initiator/ and always run into this error. Any help you can provide or potential howtos you can point me to is greatly appreciated! On May 27, 7:02 pm, [EMAIL PROTECTED] wrote: As the title says, I get this error when I try to find iscsi targets. I cannot for the life of me get open-iscsi to work and always get this error. I am trying to connect to a working sanfly iscsi target from either RHEL 5.1 client or the latest ubuntu. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
RE: Help! On Ubuntu or RHEL 5.1 client I always get: iscsiadm: discovery session to [IP] received unexpected opcode 0x20 -
Regarding MujZeptu's post on the unexpected opcode, we have identified an issue with sanFly when using open-iscsi in discovery sessions. This was not seen in testing with other iSCSI initiators. A patch for sanFly will be released once tested in-house. Steve Marfisi emBoot Inc. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Design Questions
On Wed, May 28, 2008 at 01:15:36PM -0300, Arturo 'Buanzo' Busleiman wrote: Arturo 'Buanzo' Busleiman wrote: So, the obvious question here: I want to store the data in the SAN. Should I get my sessions running in the host, or inside each virtual machine? If this is not the correct group to ask this question, I'd gladly accept suggestions for other groups! :) I am not sure how you are partitioning your space. Does each guest have an iSCSI target (or LUN) assigned to it? Or is it one big drive that they run from? Also are you envisioning using this with LiveMigration (or whatever it is called with your virtualization system)? --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Help! On Ubuntu or RHEL 5.1 client I always get: iscsiadm: discovery session to [IP] received unexpected opcode 0x20
On Wed, May 28, 2008 at 09:56:38AM -0700, [EMAIL PROTECTED] wrote: Has anyone experienced this error? I have no firewall, no SELinux running, etc. The iSCSI target should be fine as windows clients were able to utilize the sanfly targets before (or ones like it). Well, the error is just bizzare. It looks as the target is misbehaving and the initiator can't handle that. Can you capture the TCP data and provide on the mailing list? That can help a bit in narrowing down the problem. Search for 'tcpdump' and for e-mails from Mike Christie on how to sniff your TCP session data. Is there a howto or directions I can follow? Can I not do a discovery and just connect to it directly? What commands should I be using? I Those are the proper steps (well, you can substitue the /etc/init.d/open-iscsi restart with iscsiadm -m node -L all). What is your iSCSI target? --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: open-iscsi with Promise M500i dropping session / Nop-out timedout
On Wed, May 28, 2008 at 07:10:08PM +0300, Pasi Kärkkäinen wrote: Basicly those Nop-out timedout errors keep showing up all the time when there is IO going on.. and if I have dd if=/dev/mpath of=/dev/null running You can expand the timeout to a higher value? 30 seconds ? Also you might want to limit the node.session.queue_depth to a lower value as well. I tried this.. doesn't seem to help much. I still get the same errors. I'll try limiting queue depth too.. default queue depth is 32. I ran: echo 8 /sys/block/sdc/device/queue_depth echo 8 /sys/block/sdd/device/queue_depth and re-ran the dd test. Same problem. Log entries: iscsid: Nop-out timedout after 10 seconds on connection 14:0 state (3). Dropping session. iscsid: connection14:0 is operational after recovery (2 attempts) then again it seems I get these errors less often now.. (with a smaller queue depth). So it seems to help.. I'm not totally sure about this, but it could be that sometimes when I can see the io stall (with iostat) I also get that Nop-out timedout.. and sometimes not. With a smaller queue depth it just stalls, but with a bigger queue depth it also drops the session (more often). Results from the dd test with noop_out_timeout of 30 seconds and queue depth of 32: iscsid: Nop-out timedout after 30 seconds on connection 18:0 state (3). Dropping session. iscsid: connection18:0 is operational after recovery (2 attempts) kernel: sd 20:0:0:0: SCSI error: return code = 0x0002 kernel: end_request: I/O error, dev sdd, sector 13510024 kernel: device-mapper: multipath: Failing path 8:48. multipathd: 8:48: mark as failed multipathd: promise_test1: remaining active paths: 1 iscsid: Nop-out timedout after 30 seconds on connection 18:0 state (3). Dropping session. iscsid: connection18:0 is operational after recovery (2 attempts) multipathd: sdd: readsector0 checker reports path is up multipathd: 8:48: reinstated multipathd: promise_test1: remaining active paths: 2 multipathd: promise_test1: switch to path group #1 So hmm.. it looks like lowering the queue depth helps with the session drops while increasing the noop_out_timeout doesn't make much difference.. Or actually, it could be that increasing the noop_out_timeout makes the stalls happen less often.. hmm:) Thanks for the help/comments! -- Pasi --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Help! On Ubuntu or RHEL 5.1 client I always get: iscsiadm: discovery session to [IP] received unexpected opcode 0x20
[EMAIL PROTECTED] wrote: As the title says, I get this error when I try to find iscsi targets. I cannot for the life of me get open-iscsi to work and always get this error. I am trying to connect to a working sanfly iscsi target from either RHEL 5.1 client or the latest ubuntu. What target are you using? Is it a Cisco or LSI box? Some targets will send the initiator nops, which is not in the iscsi spec, and as a result open-iscsi does not support this. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: A few newbie questions
jergendutch wrote: Hello, I have iscsi setup on some boxes. They can all mount a central target in succession but not at the same time. This is fine, I have installed GFS to make this work. I read somewhere (and this is where I need the help) that open-iscsi limits the number of connections per lun to one, and I need to increase this to the number of hosts. Can anyone tell me where this is, I cannot find it any more. If you have a target with LUN1 and one portal, and if you have hostA and hostB running open-iscsi. HostA will create one connection to the target and through that we will access LUN1 and any other logical units on the target. If the target only has one portal then we will only create one connection to the target for hostA (open-iscsi creates one connection per portal on the target basically). For hostB, the initiator running on that will create another connection to the target. My second question is about startup. At the moment I start iscsi, then I run the discovery command, then restart iscsi to see the disk. After discovery you can just run iscsiadm -m node -T target -p ip:port -l to login into a specific portal that was found. There are lots of variations on this. See the README. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: open-iscsi with Promise M500i dropping session / Nop-out timedout
Pasi Kärkkäinen wrote: Hello list! Unfortunately I had to upgrade a server running CentOS 4.6 (sfnet initiator) to CentOS 5.1 (open-iscsi initiator) and now I have some problems with it You are using the open-iscsi code that comes with Centos right? (then again I was expecting it.. I hate this Promise array). /var/log/messages: May 28 15:14:16 server1 multipathd: path checkers start up May 28 15:15:39 server1 iscsid: Nop-out timedout after 10 seconds on connection 14:0 state (3). Dropping session. May 28 15:15:42 server1 iscsid: connection14:0 is operational after recovery (2 attempts) May 28 15:19:21 server1 kernel: sd 16:0:0:0: SCSI error: return code = 0x0002 May 28 15:19:21 server1 kernel: end_request: I/O error, dev sdd, sector 190057296 May 28 15:19:21 server1 kernel: device-mapper: multipath: Failing path 8:48. May 28 15:19:21 server1 kernel: sd 16:0:0:0: SCSI error: return code = 0x0002 May 28 15:19:21 server1 kernel: end_request: I/O error, dev sdd, sector 190057552 May 28 15:19:21 server1 kernel: sd 16:0:0:0: SCSI error: return code = 0x0002 May 28 15:19:21 server1 kernel: end_request: I/O error, dev sdd, sector 190057560 May 28 15:19:21 server1 multipathd: sdd: readsector0 checker reports path is down May 28 15:19:21 server1 multipathd: checker failed path 8:48 in map promise_test1 May 28 15:19:21 server1 multipathd: promise_test1: remaining active paths: 1 May 28 15:19:21 server1 iscsid: Nop-out timedout after 10 seconds on connection 14:0 state (3). Dropping session. May 28 15:19:25 server1 iscsid: connection14:0 is operational after recovery (2 attempts) May 28 15:19:26 server1 multipathd: sdd: readsector0 checker reports path is up May 28 15:19:26 server1 multipathd: 8:48: reinstated May 28 15:19:26 server1 multipathd: promise_test1: remaining active paths: 2 May 28 15:19:26 server1 multipathd: promise_test1: switch to path group #1 $ iscsiadm -m node --targetname name | grep timeo node.session.timeo.replacement_timeout = 15 node.session.err_timeo.abort_timeout = 10 node.session.err_timeo.reset_timeout = 30 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.auth_timeout = 45 node.conn[0].timeo.active_timeout = 5 node.conn[0].timeo.idle_timeout = 60 node.conn[0].timeo.ping_timeout = 5 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 10 node.session.timeo.replacement_timeout = 15 node.session.err_timeo.abort_timeout = 10 node.session.err_timeo.reset_timeout = 30 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.auth_timeout = 45 node.conn[0].timeo.active_timeout = 5 node.conn[0].timeo.idle_timeout = 60 node.conn[0].timeo.ping_timeout = 5 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 10 Basicly those Nop-out timedout errors keep showing up all the time when there is IO going on.. and if I have dd if=/dev/mpath of=/dev/null running IO rates seem to go down every 20 seconds or so and stay stalled (at 0) for 5 seconds or so.. weird. Initiator is the default RHEL/CentOS 5.1 version. Most probably the problem is in the Promise target because I had a lot of issues with it earlier too.. It took some time before I got it to work ok with CentOS 4.6. With CentOS 4.6 (sfnet initiator) I was using this in iscsid.conf: ConnFailTimeout=5 PingTimeout=10 and also: echo 60 /sys/block/sdc/device/timeout echo 60 /sys/block/sdd/device/timeout But I remember seeing errors / failing paths in the logs then too.. Anyway, is there anything I can do about these errors, or should I just let multipath do its job :) You can turn nops off open-iscsi node.conn[0].timeo.noop_out_interval = 0 node.conn[0].timeo.noop_out_timeout = 0 sfnet PingTimeout=0 ActiveTimeout=0 IdleTimeout=0 But I think the problem with promise was that it needed new firmware or something right? If it did not work with sfnet and open-iscsi then I think that was the problem. If it just did not work on open-iscsi then it may have been something else. Did you search the list by any chance? --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: open-iscsi with Promise M500i dropping session / Nop-out timedout
On Wed, May 28, 2008 at 01:17:17PM -0500, Mike Christie wrote: Pasi Kärkkäinen wrote: Hello list! Unfortunately I had to upgrade a server running CentOS 4.6 (sfnet initiator) to CentOS 5.1 (open-iscsi initiator) and now I have some problems with it You are using the open-iscsi code that comes with Centos right? Yep, the default open-iscsi that comes with CentOS 5.1 (and the latest updates installed). You can turn nops off open-iscsi node.conn[0].timeo.noop_out_interval = 0 node.conn[0].timeo.noop_out_timeout = 0 Does turning nops off have any side effects? But I think the problem with promise was that it needed new firmware or something right? If it did not work with sfnet and open-iscsi then I think that was the problem. If it just did not work on open-iscsi then it may have been something else. Did you search the list by any chance? Yep, I was searching.. I think same kind of problem with Infotrend target was fixed with a firmware upgrade. I'm running the latest firmware on that Promise.. so that doesn't help in this case. And yep, I had/have issues with both sfnet (CentOS 4) and open-iscsi (CentOS 5) when I use this Promise target.. Here's some other recent thread about problems with the same target: http://www.mail-archive.com/open-iscsi@googlegroups.com/msg00692.html -- Pasi --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Connection Errors
swejis wrote: OK, new logfile found here: http://www.wehay.com/messages.new.gz Can you remind me what target you are using and how many sessions you should have? It looks like only one session has problems. The other/s look like they are just fine. Are the errors now (before I understood that it happened when no IO was running) only occuring when you put IO on the session/disk? --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Connection Errors
On Wed, May 28, 2008 at 01:44:02PM -0500, Mike Christie wrote: swejis wrote: OK, new logfile found here: http://www.wehay.com/messages.new.gz Can you remind me what target you are using and how many sessions you should have? It looks like only one session has problems. The other/s look like they are just fine. Are the errors now (before I understood that it happened when no IO was running) only occuring when you put IO on the session/disk? From the first mail of this thread: The target is the infamous Promise m500i -- Pasi --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Connection Errors
Can you remind me what target you are using and how many sessions you should have? The m500i have got two portals, so two session are started of for each portal. tcp: [1] 192.168.43.6:3260,2 iqn. 1994-12.com.promise.target.a9.39.4.55.1.0.0.20 tcp: [2] 192.168.43.5:3260,1 iqn. 1994-12.com.promise.target.a9.39.4.55.1.0.0.20 It looks like only one session has problems. True indeed, it seem always only one of the two connections reports an error, I actually tried to shift to the second portal when doing the discovery in order to see if that would make any difference. The other/s look like they are just fine. Are the errors now (before I understood that it happened when no IO was running) only occuring when you put IO on the session/disk? The error only occurs when there is I/O on the connection. I actually thought we had fixed the problem when I had not seen any errors for days, but during that time the machine just idled, as soon as I got some I/O the error came back immediately. Brgds Jonas --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: upgrade from 2.0.865 to 2.0.869
Thanks Mike --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
