Re: [pmacct-discussion] Crash in pmacct
On 07/08/2013 05:30:36 AM, Joan wrote: > BTW, just found in the changelog for 0.14.1 this: > ! fix, net_aggr.c: defining a networks_file configuration directive > in > conjunction with --enable-ipv6 was causing a SEGVs. This is now > solved. > > That could be the cause for my issue (unless debian backported the > fixes) See /usr/share/doc/pmacct*/changelog.Debian* to check for backports. Karl Free Software: "You don't pay back, you pay forward." -- Robert A. Heinlein ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
Re: [pmacct-discussion] Crash in pmacct
Fair enough. It did sound similar so I assumed it was that. Sorry On 8 Jul 2013 14:41, "Joan" wrote: > @george, the issue is not the one you reported (that was against > 0.14.3cvs) but with an older version. > > revision 1.16 > date: 2012-04-12 14:44:30 +0200; author: paolo; state: Exp; lines: +3 > -3; > > > * nfacctd: etype primitive can now be populated from IP_PROTOCOL_VERSION, > ie. Field Type #60, in addition to ETHERTYPE, ie. Field Type #256. Should > both be present the latter has priority over the former. > * fix, net_aggr.c: if --enable-ipv6 is specified, defining a networks_file > can cause SEGVs. This is now solved. > > > > 2013/7/8 Joan > >> The wheezy defautl was crashing for me a bit after loading the >> networks_file (that take about a couple of minutes to load) I was trying to >> isolate this to open a bug in debian, so at least others are warned. >> After unsetting the --enable-ipv6 flag and recompile again with debian >> settings/patches, it seems that it doens't crash anymore. >> Still I will recompile the 0.14.3 version because I was planning to use >> the extended format of networks_file for the nexthop feature. >> >> >> 2013/7/8 George-Cristian Bîrzan >> >>> I think I reported that bug, and it was crashing instantly on start, not >>> within minutes. Also, I think that never ended up in a release afair, it >>> was just in trunk. >>> On 8 Jul 2013 13:30, "Joan" wrote: >>> BTW, just found in the changelog for 0.14.1 this: ! fix, net_aggr.c: defining a networks_file configuration directive in conjunction with --enable-ipv6 was causing a SEGVs. This is now solved. That could be the cause for my issue (unless debian backported the fixes) 2013/7/8 Joan > I have tried the version in wheezy with the same results as with > squeeze, now, I am trying to reproduce the crash with the 0.14.3 > downloaded > from the site. > So far it hasn't crashed, but so far there's only minimal traffic via > this router. > > I'll be back with more info... > > > 2013/7/6 Karl O. Pinc > > As an alternative you should consider upgrading to debian >> wheezy as squeeze will go out of support about 2013-11-04, >> in 4 months. >> You'll have to upgrade anyway and this might fix your problem. >> Wheezy has pmacct 0.14.0. >> >> You can get help with any of this for debian using irc chat on >> the #debian channel of irc.freenode.net. >> >> On 07/05/2013 05:39:41 PM, Paolo Lucente wrote: >> > Hi Joan, >> > >> > I can verify the backtrace you provided does not apply to the >> current >> > (and 0.14.3 release to that matter) code. Also, the issue is related >> > to >> > querying the content of a networks_file - which is a part of the >> code >> > that got some changes meanwhile. I propose you download/compile >> > 0.14.3 >> > release or CVS code and try again. If these still give troubles >> > please >> > send me privately a new backtrace to inspect. Let me know. >> > >> > Cheers, >> > Paolo >> > >> > On Fri, Jul 05, 2013 at 06:46:21PM +0200, Joan wrote: >> > > Hi again, >> > > >> > > I am experiencing crashes only after a couple of minutes of >> > starting-04 >> > > pmacctd. I am on the current squeeze version, but I recompiled >> from >> > the >> > > sources to get non-stripped binaries. >> > > After running the process for some minutes the program crashes as >> > usually >> > > leaving a nice backtrace. >> > > Could you have a look into this and tell me if it's something that >> > was >> > > fixed in a newer version? >> > > >> > > Regards, >> > > >> > > Joan >> > >> > >> > > ___ >> > > pmacct-discussion mailing list >> > > http://www.pmacct.net/#mailinglists >> > >> > >> > ___ >> > pmacct-discussion mailing list >> > http://www.pmacct.net/#mailinglists >> > >> > >> >> >> >> >> Karl >> Free Software: "You don't pay back, you pay forward." >> -- Robert A. Heinlein >> >> ___ >> pmacct-discussion mailing list >> http://www.pmacct.net/#mailinglists >> > > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists >>> >>> ___ >>> pmacct-discussion mailing list >>> http://www.pmacct.net/#mailinglists >>> >> >> > > ___ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
Re: [pmacct-discussion] Crash in pmacct
@george, the issue is not the one you reported (that was against 0.14.3cvs) but with an older version. revision 1.16 date: 2012-04-12 14:44:30 +0200; author: paolo; state: Exp; lines: +3 -3; * nfacctd: etype primitive can now be populated from IP_PROTOCOL_VERSION, ie. Field Type #60, in addition to ETHERTYPE, ie. Field Type #256. Should both be present the latter has priority over the former. * fix, net_aggr.c: if --enable-ipv6 is specified, defining a networks_file can cause SEGVs. This is now solved. 2013/7/8 Joan > The wheezy defautl was crashing for me a bit after loading the > networks_file (that take about a couple of minutes to load) I was trying to > isolate this to open a bug in debian, so at least others are warned. > After unsetting the --enable-ipv6 flag and recompile again with debian > settings/patches, it seems that it doens't crash anymore. > Still I will recompile the 0.14.3 version because I was planning to use > the extended format of networks_file for the nexthop feature. > > > 2013/7/8 George-Cristian Bîrzan > >> I think I reported that bug, and it was crashing instantly on start, not >> within minutes. Also, I think that never ended up in a release afair, it >> was just in trunk. >> On 8 Jul 2013 13:30, "Joan" wrote: >> >>> BTW, just found in the changelog for 0.14.1 this: >>> ! fix, net_aggr.c: defining a networks_file configuration directive in >>> conjunction with --enable-ipv6 was causing a SEGVs. This is now >>> solved. >>> >>> That could be the cause for my issue (unless debian backported the fixes) >>> >>> >>> 2013/7/8 Joan >>> I have tried the version in wheezy with the same results as with squeeze, now, I am trying to reproduce the crash with the 0.14.3 downloaded from the site. So far it hasn't crashed, but so far there's only minimal traffic via this router. I'll be back with more info... 2013/7/6 Karl O. Pinc As an alternative you should consider upgrading to debian > wheezy as squeeze will go out of support about 2013-11-04, > in 4 months. > You'll have to upgrade anyway and this might fix your problem. > Wheezy has pmacct 0.14.0. > > You can get help with any of this for debian using irc chat on > the #debian channel of irc.freenode.net. > > On 07/05/2013 05:39:41 PM, Paolo Lucente wrote: > > Hi Joan, > > > > I can verify the backtrace you provided does not apply to the current > > (and 0.14.3 release to that matter) code. Also, the issue is related > > to > > querying the content of a networks_file - which is a part of the code > > that got some changes meanwhile. I propose you download/compile > > 0.14.3 > > release or CVS code and try again. If these still give troubles > > please > > send me privately a new backtrace to inspect. Let me know. > > > > Cheers, > > Paolo > > > > On Fri, Jul 05, 2013 at 06:46:21PM +0200, Joan wrote: > > > Hi again, > > > > > > I am experiencing crashes only after a couple of minutes of > > starting-04 > > > pmacctd. I am on the current squeeze version, but I recompiled from > > the > > > sources to get non-stripped binaries. > > > After running the process for some minutes the program crashes as > > usually > > > leaving a nice backtrace. > > > Could you have a look into this and tell me if it's something that > > was > > > fixed in a newer version? > > > > > > Regards, > > > > > > Joan > > > > > > > ___ > > > pmacct-discussion mailing list > > > http://www.pmacct.net/#mailinglists > > > > > > ___ > > pmacct-discussion mailing list > > http://www.pmacct.net/#mailinglists > > > > > > > > > Karl > Free Software: "You don't pay back, you pay forward." > -- Robert A. Heinlein > > ___ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists > >>> >>> ___ >>> pmacct-discussion mailing list >>> http://www.pmacct.net/#mailinglists >>> >> >> ___ >> pmacct-discussion mailing list >> http://www.pmacct.net/#mailinglists >> > > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
Re: [pmacct-discussion] Crash in pmacct
The wheezy defautl was crashing for me a bit after loading the networks_file (that take about a couple of minutes to load) I was trying to isolate this to open a bug in debian, so at least others are warned. After unsetting the --enable-ipv6 flag and recompile again with debian settings/patches, it seems that it doens't crash anymore. Still I will recompile the 0.14.3 version because I was planning to use the extended format of networks_file for the nexthop feature. 2013/7/8 George-Cristian Bîrzan > I think I reported that bug, and it was crashing instantly on start, not > within minutes. Also, I think that never ended up in a release afair, it > was just in trunk. > On 8 Jul 2013 13:30, "Joan" wrote: > >> BTW, just found in the changelog for 0.14.1 this: >> ! fix, net_aggr.c: defining a networks_file configuration directive in >> conjunction with --enable-ipv6 was causing a SEGVs. This is now >> solved. >> >> That could be the cause for my issue (unless debian backported the fixes) >> >> >> 2013/7/8 Joan >> >>> I have tried the version in wheezy with the same results as with >>> squeeze, now, I am trying to reproduce the crash with the 0.14.3 downloaded >>> from the site. >>> So far it hasn't crashed, but so far there's only minimal traffic via >>> this router. >>> >>> I'll be back with more info... >>> >>> >>> 2013/7/6 Karl O. Pinc >>> >>> As an alternative you should consider upgrading to debian wheezy as squeeze will go out of support about 2013-11-04, in 4 months. You'll have to upgrade anyway and this might fix your problem. Wheezy has pmacct 0.14.0. You can get help with any of this for debian using irc chat on the #debian channel of irc.freenode.net. On 07/05/2013 05:39:41 PM, Paolo Lucente wrote: > Hi Joan, > > I can verify the backtrace you provided does not apply to the current > (and 0.14.3 release to that matter) code. Also, the issue is related > to > querying the content of a networks_file - which is a part of the code > that got some changes meanwhile. I propose you download/compile > 0.14.3 > release or CVS code and try again. If these still give troubles > please > send me privately a new backtrace to inspect. Let me know. > > Cheers, > Paolo > > On Fri, Jul 05, 2013 at 06:46:21PM +0200, Joan wrote: > > Hi again, > > > > I am experiencing crashes only after a couple of minutes of > starting-04 > > pmacctd. I am on the current squeeze version, but I recompiled from > the > > sources to get non-stripped binaries. > > After running the process for some minutes the program crashes as > usually > > leaving a nice backtrace. > > Could you have a look into this and tell me if it's something that > was > > fixed in a newer version? > > > > Regards, > > > > Joan > > > > ___ > > pmacct-discussion mailing list > > http://www.pmacct.net/#mailinglists > > > ___ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists > > Karl Free Software: "You don't pay back, you pay forward." -- Robert A. Heinlein ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists >>> >>> >> >> ___ >> pmacct-discussion mailing list >> http://www.pmacct.net/#mailinglists >> > > ___ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
Re: [pmacct-discussion] Crash in pmacct
I think I reported that bug, and it was crashing instantly on start, not within minutes. Also, I think that never ended up in a release afair, it was just in trunk. On 8 Jul 2013 13:30, "Joan" wrote: > BTW, just found in the changelog for 0.14.1 this: > ! fix, net_aggr.c: defining a networks_file configuration directive in > conjunction with --enable-ipv6 was causing a SEGVs. This is now solved. > > That could be the cause for my issue (unless debian backported the fixes) > > > 2013/7/8 Joan > >> I have tried the version in wheezy with the same results as with squeeze, >> now, I am trying to reproduce the crash with the 0.14.3 downloaded from the >> site. >> So far it hasn't crashed, but so far there's only minimal traffic via >> this router. >> >> I'll be back with more info... >> >> >> 2013/7/6 Karl O. Pinc >> >> As an alternative you should consider upgrading to debian >>> wheezy as squeeze will go out of support about 2013-11-04, >>> in 4 months. >>> You'll have to upgrade anyway and this might fix your problem. >>> Wheezy has pmacct 0.14.0. >>> >>> You can get help with any of this for debian using irc chat on >>> the #debian channel of irc.freenode.net. >>> >>> On 07/05/2013 05:39:41 PM, Paolo Lucente wrote: >>> > Hi Joan, >>> > >>> > I can verify the backtrace you provided does not apply to the current >>> > (and 0.14.3 release to that matter) code. Also, the issue is related >>> > to >>> > querying the content of a networks_file - which is a part of the code >>> > that got some changes meanwhile. I propose you download/compile >>> > 0.14.3 >>> > release or CVS code and try again. If these still give troubles >>> > please >>> > send me privately a new backtrace to inspect. Let me know. >>> > >>> > Cheers, >>> > Paolo >>> > >>> > On Fri, Jul 05, 2013 at 06:46:21PM +0200, Joan wrote: >>> > > Hi again, >>> > > >>> > > I am experiencing crashes only after a couple of minutes of >>> > starting-04 >>> > > pmacctd. I am on the current squeeze version, but I recompiled from >>> > the >>> > > sources to get non-stripped binaries. >>> > > After running the process for some minutes the program crashes as >>> > usually >>> > > leaving a nice backtrace. >>> > > Could you have a look into this and tell me if it's something that >>> > was >>> > > fixed in a newer version? >>> > > >>> > > Regards, >>> > > >>> > > Joan >>> > >>> > >>> > > ___ >>> > > pmacct-discussion mailing list >>> > > http://www.pmacct.net/#mailinglists >>> > >>> > >>> > ___ >>> > pmacct-discussion mailing list >>> > http://www.pmacct.net/#mailinglists >>> > >>> > >>> >>> >>> >>> >>> Karl >>> Free Software: "You don't pay back, you pay forward." >>> -- Robert A. Heinlein >>> >>> ___ >>> pmacct-discussion mailing list >>> http://www.pmacct.net/#mailinglists >>> >> >> > > ___ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
Re: [pmacct-discussion] Crash in pmacct
BTW, just found in the changelog for 0.14.1 this: ! fix, net_aggr.c: defining a networks_file configuration directive in conjunction with --enable-ipv6 was causing a SEGVs. This is now solved. That could be the cause for my issue (unless debian backported the fixes) 2013/7/8 Joan > I have tried the version in wheezy with the same results as with squeeze, > now, I am trying to reproduce the crash with the 0.14.3 downloaded from the > site. > So far it hasn't crashed, but so far there's only minimal traffic via this > router. > > I'll be back with more info... > > > 2013/7/6 Karl O. Pinc > > As an alternative you should consider upgrading to debian >> wheezy as squeeze will go out of support about 2013-11-04, >> in 4 months. >> You'll have to upgrade anyway and this might fix your problem. >> Wheezy has pmacct 0.14.0. >> >> You can get help with any of this for debian using irc chat on >> the #debian channel of irc.freenode.net. >> >> On 07/05/2013 05:39:41 PM, Paolo Lucente wrote: >> > Hi Joan, >> > >> > I can verify the backtrace you provided does not apply to the current >> > (and 0.14.3 release to that matter) code. Also, the issue is related >> > to >> > querying the content of a networks_file - which is a part of the code >> > that got some changes meanwhile. I propose you download/compile >> > 0.14.3 >> > release or CVS code and try again. If these still give troubles >> > please >> > send me privately a new backtrace to inspect. Let me know. >> > >> > Cheers, >> > Paolo >> > >> > On Fri, Jul 05, 2013 at 06:46:21PM +0200, Joan wrote: >> > > Hi again, >> > > >> > > I am experiencing crashes only after a couple of minutes of >> > starting-04 >> > > pmacctd. I am on the current squeeze version, but I recompiled from >> > the >> > > sources to get non-stripped binaries. >> > > After running the process for some minutes the program crashes as >> > usually >> > > leaving a nice backtrace. >> > > Could you have a look into this and tell me if it's something that >> > was >> > > fixed in a newer version? >> > > >> > > Regards, >> > > >> > > Joan >> > >> > >> > > ___ >> > > pmacct-discussion mailing list >> > > http://www.pmacct.net/#mailinglists >> > >> > >> > ___ >> > pmacct-discussion mailing list >> > http://www.pmacct.net/#mailinglists >> > >> > >> >> >> >> >> Karl >> Free Software: "You don't pay back, you pay forward." >> -- Robert A. Heinlein >> >> ___ >> pmacct-discussion mailing list >> http://www.pmacct.net/#mailinglists >> > > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
Re: [pmacct-discussion] Crash in pmacct
I have tried the version in wheezy with the same results as with squeeze, now, I am trying to reproduce the crash with the 0.14.3 downloaded from the site. So far it hasn't crashed, but so far there's only minimal traffic via this router. I'll be back with more info... 2013/7/6 Karl O. Pinc > As an alternative you should consider upgrading to debian > wheezy as squeeze will go out of support about 2013-11-04, > in 4 months. > You'll have to upgrade anyway and this might fix your problem. > Wheezy has pmacct 0.14.0. > > You can get help with any of this for debian using irc chat on > the #debian channel of irc.freenode.net. > > On 07/05/2013 05:39:41 PM, Paolo Lucente wrote: > > Hi Joan, > > > > I can verify the backtrace you provided does not apply to the current > > (and 0.14.3 release to that matter) code. Also, the issue is related > > to > > querying the content of a networks_file - which is a part of the code > > that got some changes meanwhile. I propose you download/compile > > 0.14.3 > > release or CVS code and try again. If these still give troubles > > please > > send me privately a new backtrace to inspect. Let me know. > > > > Cheers, > > Paolo > > > > On Fri, Jul 05, 2013 at 06:46:21PM +0200, Joan wrote: > > > Hi again, > > > > > > I am experiencing crashes only after a couple of minutes of > > starting-04 > > > pmacctd. I am on the current squeeze version, but I recompiled from > > the > > > sources to get non-stripped binaries. > > > After running the process for some minutes the program crashes as > > usually > > > leaving a nice backtrace. > > > Could you have a look into this and tell me if it's something that > > was > > > fixed in a newer version? > > > > > > Regards, > > > > > > Joan > > > > > > > ___ > > > pmacct-discussion mailing list > > > http://www.pmacct.net/#mailinglists > > > > > > ___ > > pmacct-discussion mailing list > > http://www.pmacct.net/#mailinglists > > > > > > > > > Karl > Free Software: "You don't pay back, you pay forward." > -- Robert A. Heinlein > > ___ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists > ___ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists