On Monday, August 27, 2001, at 12:33 PM, Mike Hebel wrote:
*ouch!* That will most likely have to be replaced and at least taped
temporarily. Check E-Bay for these - User: old-mac-milt sells them
occasionally.
I still got a piece of it that I can glue back on.
The other end of it is a brown board attached to a white connector.
This is underneath a cover which I thought you already had removed.
This is the white connector I mentioned to the left of the _right_
hinge.
Yeah, I do see the brown board/white connector part. The thing I don't
see is the actual connection between the ribon and the brown board.
On the back of the PowerBook behind the door (if you have that) is a
serial number sticker. On each side of the sticker is a screw.
Remove these and a central cover will pull off of the other side of
the PowerBook directly below where you removed the microphone cover.
I had that off from the beginning. On the right of that section though
is
a grey plastic part that covers the connection between the brown board
and the ribon.
MR Should I take out the bottom of the powerbook to go in that way?
No. There's no reason to remove any of the bottom screws when working
with the system video.
How can I see if the connection between the board and the ribon is ok?
Matvei
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac http://lowendmac.com/lists/support.html
PowerBooks list info: http://lowendmac.com/lists/powerbooks.shtml
Send list messages to: mailto:[EMAIL PROTECTED]
To unsubscribe, email: mailto:[EMAIL PROTECTED]
For digest mode, email: mailto:[EMAIL PROTECTED]
Subscription questions: mailto:[EMAIL PROTECTED]
Archive: http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/
Using a Macintosh? Get free email and more at Applelinks!
http://www.applelinks.com
