subject:"\"Re\\\: \\\[RE\\\-wrenches\\\] Corrugated roof brackets\""

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-06 Thread Luke Christy

Adam,
I'm a big fan of the Corrubracket. We've installed hundreds of them on a whole 
range of different types of corrugated roofing, with zero problems so far. 
The peel-and stick sealant that comes attached to the bracket works really 
well, but it can get pulled aside as the fastener goes through and grabs the 
sealant. I always try to check  the bracket after attachment to make sure that 
the sealant is fully between the bracket and the roofing, and often I will daub 
polyurethane caulking on top of the fasteners.

The only thing I don't like is the price point and the fact that the span of 
the four mounting holes often necessitates some form of blocking.

-Luke


Luke Christy

NABCEP Certified PV Installation Professional™: Certification #031409-25 
NABCEP Certified Solar Heating Installer™: Certification #ST032611-03   
CoSEIA Certified PV Installer 

Solar Gain Services, LLC
PO Box 531
Monte Vista, CO. 81144
sgsrenewab...@gmail.com
719.588.3044
www.sgsrenewables.com


> From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
> Behalf Of AE Solar
> Sent: Thursday, March 05, 2015 8:01 AM
> To: RE-wrenches
> Subject: [RE-wrenches] Corrugated Roof Brackets
> 
> 
> 
> Hey Wrenchers,
> 
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
>  . Its for a very small system on
> a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> 
> Adam
> 
> 
> 
> 
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G 
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
> 
> **


   







___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-06 Thread william

Adam:

 

We used the Corrubracket, I thought they were sub-standard in many ways.  I
dislike that the penetration is in the low point of the profile.  Also, the
threaded hubs stripped easily.  The overall feel was that it was flimsy.

 

We subsequently tried the SnapNRack Corrugated Roof Block and found it to be
quite adequate.  It is displayed on the web page with the 500 series product
line.  The SNR product works on industrial corrugated metal (narrow ridges
and wide valleys) and historic barn corrugations (sine wave profile) alike.
They are priced at less than $5.00 each (not including fastener).
Coincidentally, I am placing an order for a quantity of them today.

 

We are waiting for a sample of a product made by EJOT.  This is a bolt that
penetrates through the high point of the corrugation (always a better
option) and includes a rain guard of some sort.  The rain guard is pictured
on industrial roofing and I am not sure it will work on barn corrugation
profile.  The product has threads for wood or metal.  I always like to touch
hardware to get a better feel for the quality and usability.  I will report
when I get my hands on a sample.

 

William Miller

 

 

 

 

From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of AE Solar
Sent: Thursday, March 05, 2015 8:01 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Roof Brackets

 

Hey Wrenchers,

Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking at the S-5! CorruBracket
 . Its for a very small system on
a hunting cabin. The pitch is probably about 20 degrees and and I'm
concerned about leaks over time. Any recommendations are appreciated. Thanks

Adam




Adam Katzman
Autonomous Energies
4872 State Route 9G 
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-06 Thread Mark Westbrock

Hi Jay,

Just use your roofing sealant of choice: fill the pilot hole, leaving a
nice big dab on the surface.  Because all holes are in the peaks of the
corrugations, the penetration point should see very little water there.  In
my opinion, this is less risky than trying to seal the corrugations with a
dynaflash.

Although the manufacturer's literature also shows using this product with
pro-panel type roofs, for those we prefer either standoffs with dyna-flash
or Schletter Fix-Ts.

Cheers,

Mark


*Mark Westbrock*
Branch Manager & Employee-Owner
NM EE98J Journeyman Electrician
NABCEP Certified PV Installation Professional
NABCEP Certified PV Technical Sales




Positive Energy, Inc.
510 S. Main St.
Las Cruces, NM 88001
office: 575-524-2030
cell: 575-640-2432
m...@positiveenergysolar.com 
www.positiveenergysolar.com



  




On Thu, Mar 5, 2015 at 3:40 PM, jay peltz  wrote:

> Hi Mark,
>
> I'm curious how you seal the hole.
>
> thanks
>
> jay
>
> peltz power
>
>
> On Mar 5, 2015, at 9:46 AM, Mark Westbrock <
> westbr...@positiveenergysolar.com> wrote:
>
> We like the SnapNrack corrugated roof blocks
> .  They are
> simple, effective, and not too expensive (I think around $3.50 each).  The
> only trick is that you need access to the roofing members because you will
> need to add blocking or sister up trusses so that you have a structural
> member directly below a corrugation peak.
> 
> *Mark Westbrock*
> Branch Manager & Employee-Owner
> NM EE98J Journeyman Electrician
> NABCEP Certified PV Installation Professional
> NABCEP Certified PV Technical Sales
>
> Positive Energy, Inc.
> 510 S. Main St.
> Las Cruces, NM 88001
> office: 575-524-2030
> cell: 575-640-2432
> m...@positiveenergysolar.com 
> www.positiveenergysolar.com
>
>
>
> On Thu, Mar 5, 2015 at 9:00 AM, AE Solar 
> wrote:
>
>> Hey Wrenchers,
>> Anyone have feedback or preferences on mounting systems for corrugated
>> roofs? I'm looking at the S-5! CorruBracket
>> . Its for a very small system
>> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
>> concerned about leaks over time. Any recommendations are appreciated. Thanks
>> Adam
>>
>> Adam Katzman
>> Autonomous Energies
>> 4872 State Route 9G
>> Germantown NY, 12526
>> www.autonomousenergies.com
>> (518) 567-1468
>>
>>
>> ___
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-05 Thread Max Balchowsky

we've installed hundreds of these and use rubber grommets  Max Balchowsky
Design Engineer
Golden Bridge Development
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810"Building a Better Future For The Next Generation"

  From: jay peltz 
 To: RE-wrenches  
 Sent: Thursday, March 5, 2015 2:40 PM
 Subject: Re: [RE-wrenches] Corrugated Roof Brackets

Hi Mark,
I'm curious how you seal the hole.
thanks
jay
peltz power

On Mar 5, 2015, at 9:46 AM, Mark Westbrock  
wrote:

We like the SnapNrack corrugated roof blocks.  They are simple, effective, and 
not too expensive (I think around $3.50 each).  The only trick is that you need 
access to the roofing members because you will need to add blocking or sister 
up trusses so that you have a structural member directly below a corrugation 
peak.
Mark Westbrock
Branch Manager & Employee-OwnerNM EE98J Journeyman Electrician
NABCEP Certified PV Installation ProfessionalNABCEP Certified PV Technical Sales

Positive Energy, Inc.
510 S. Main St.Las Cruces, NM 88001
office: 575-524-2030
cell: 575-640-2432
m...@positiveenergysolar.com
www.positiveenergysolar.com

On Thu, Mar 5, 2015 at 9:00 AM, AE Solar  wrote:

Hey Wrenchers,Anyone have feedback or preferences on mounting systems for 
corrugated roofs? I'm looking at the S-5! CorruBracket. Its for a very small 
system on a hunting cabin. The pitch is probably about 20 degrees and and I'm 
concerned about leaks over time. Any recommendations are appreciated. ThanksAdam
Adam Katzman
Autonomous Energies
4872 State Route 9G 
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

  ___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-05 Thread jay peltz

Hi Mark,

I'm curious how you seal the hole.

thanks

jay

peltz power


On Mar 5, 2015, at 9:46 AM, Mark Westbrock  
wrote:

> We like the SnapNrack corrugated roof blocks.  They are simple, effective, 
> and not too expensive (I think around $3.50 each).  The only trick is that 
> you need access to the roofing members because you will need to add blocking 
> or sister up trusses so that you have a structural member directly below a 
> corrugation peak.
> 
> Mark Westbrock
> Branch Manager & Employee-Owner
> NM EE98J Journeyman Electrician
> NABCEP Certified PV Installation Professional
> NABCEP Certified PV Technical Sales
> 
> Positive Energy, Inc.
> 510 S. Main St.
> Las Cruces, NM 88001
> office: 575-524-2030
> cell: 575-640-2432
> m...@positiveenergysolar.com
> www.positiveenergysolar.com
> 
> 
> 
> On Thu, Mar 5, 2015 at 9:00 AM, AE Solar  wrote:
> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated roofs? 
> I'm looking at the S-5! CorruBracket. Its for a very small system on a 
> hunting cabin. The pitch is probably about 20 degrees and and I'm concerned 
> about leaks over time. Any recommendations are appreciated. Thanks
> Adam
> 
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G 
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-05 Thread Mark Westbrock

We like the SnapNrack corrugated roof blocks
.  They are
simple, effective, and not too expensive (I think around $3.50 each).  The
only trick is that you need access to the roofing members because you will
need to add blocking or sister up trusses so that you have a structural
member directly below a corrugation peak.

*Mark Westbrock*
Branch Manager & Employee-Owner
NM EE98J Journeyman Electrician
NABCEP Certified PV Installation Professional
NABCEP Certified PV Technical Sales

Positive Energy, Inc.
510 S. Main St.
Las Cruces, NM 88001
office: 575-524-2030
cell: 575-640-2432
m...@positiveenergysolar.com 
www.positiveenergysolar.com



On Thu, Mar 5, 2015 at 9:00 AM, AE Solar 
wrote:

> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> . Its for a very small system
> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> Adam
>
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-05 Thread Jason Szumlanski

I've tried the Versabracket, which uses a similar sealing method, with
great results. I can't speak for the Corrubracket specifically.

Jason Szumlanski


On Thu, Mar 5, 2015 at 11:00 AM, AE Solar 
wrote:

> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> . Its for a very small system
> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> Adam
>
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>

-- 
*Florida Solar Design Group is not an engineering or architectural firm and 
acts only as a consultant and authorized independent sales agent. Any 
advice or work product provided shall not be considered licensed 
professional services provided under Florida Statute Chapters 471, 481, or 
491.*
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-05 Thread Marco Mangelsdorf

Our S-5! friends have come up with a new bracket for sinusoidal, corrugated
roofs with the penetration points being ON TOP of the ridges and not in the
valleys, which is a more bettah design (as we say here in Hawaii). S-5! is
only now supplying them to their distributor chain, so you may want to
contact S-5! directly to get them.  They're in the ~ $10/piece (ouch!)
range.

 

marco

 

From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of AE Solar
Sent: Thursday, March 05, 2015 6:01 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Roof Brackets

 

Hey Wrenchers,

Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking at the S-5! CorruBracket
 . Its for a very small system on
a hunting cabin. The pitch is probably about 20 degrees and and I'm
concerned about leaks over time. Any recommendations are appreciated. Thanks

Adam




Adam Katzman
Autonomous Energies
4872 State Route 9G 
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2250 / Virus Database: 4257/8730 - Release Date: 03/05/15

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

2015-03-05 Thread Jerry Shafer

Also look at Sunmodo they have some nice brackets and are state side
Jerry
On Mar 5, 2015 6:00 AM, "AE Solar"  wrote:

> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> . Its for a very small system
> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> Adam
>
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated roof brackets

2014-01-24 Thread Jerry Shafer

Go look at sunmodo  they also have some solutions tell them jerry from
affinity sent you, great price point. The are in Washington state check it
out
On Jan 23, 2014 1:37 PM, "All Solar, Inc."  wrote:

> Can anyone comment on the S-5! CorruBracket?
> Any other recommendations or comments appreciated.
>
> Jeremy Rodriguez,
> President
>
> All Solar, Inc.
> 1463 M
> Penrose Colorado 81240
> 719-372-3808 office
> 719-372-3804 fax
> www.asolarelectric.com
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated roof brackets

2014-01-24 Thread William Miller

Jeremy:

 

We used them on one job and did not favor them for these reasons:

 

1.   Don't like having the penetrations in the valleys

2.   The adhesive is fragile and either peels off or significant amounts
wrap around the drill or fasteners

3.   The threaded connections felt fragile and I recall a few stripped

 

The next job we used Snapnrack corrugated roof brackets and were very
pleased.  http://www.snapnrack.com/series-500-metal-roof-mount-system

 

William

 

-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of All Solar,
Inc.
Sent: Thursday, January 23, 2014 1:37 PM
To: re-wrenches@lists.re-wrenches.org
Subject: [RE-wrenches] Corrugated roof brackets

 

Can anyone comment on the S-5! CorruBracket?

Any other recommendations or comments appreciated. 

 

Jeremy Rodriguez,

President

 

All Solar, Inc. 

1463 M

Penrose Colorado 81240

719-372-3808 office

719-372-3804 fax

  www.asolarelectric.com

 

Sent by Jeremy's iPhone. Sorry for typos and shorthand!

___

List sponsored by Home Power magazine

 

List Address:  
RE-wrenches@lists.re-wrenches.org

 

Change email address & settings:

 
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

 

List-Archive:

http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

 

List rules & etiquette:

 
www.re-wrenches.org/etiquette.htm

 

Check out participant bios:

  www.members.re-wrenches.org

 

 

 

-

No virus found in this message.

Checked by AVG -   www.avg.com

Version: 2013.0.3462 / Virus Database: 3681/7027 - Release Date: 01/23/14

___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated Roof Brackets

Re: [RE-wrenches] Corrugated roof brackets

Re: [RE-wrenches] Corrugated roof brackets

11 matches

Site Navigation

Mail list logo

Footer information