[Repeater-Builder] Re: CWID-70 Manual needed.

[Eric Lemmon]

I wonder if the CWID-70 is a later version of the CWID-50 made by Control
Signal, Inc.  A new PROM chip programmed with your desired info costs about
$25 from CSI.  Here's the manual for the latter:



73, Eric Lemmon WB6FLY


--- In Repeater-Builder@yahoogroups.com
 , "Don" <[EMAIL PROTECTED]> wrote:
>
> I have a Fellow Ham looking for Info on this Unit, The sad thing is I
> had one and the Manual, and actually ordered a New ROM With My call 
on
> it, But I cannot find the info it is tough getting old Any info would
> be greatly appreciated 
> 
> Thanks Don KA9QJG
>

Re: [Repeater-Builder] Re: CWID

[Eric Lemmon]

The correct callsign is N 0 X A S.  The URL for the ID-O-MATIC Web site
is:

www.hamgadgets.com

73, Eric Lemmon WB6FLY

Gary wrote:

... You might want to check out the ID-O-MATIC that is sold by N0AXS...






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

Re: [Repeater-Builder] Re: CWID

[Jim B.]

Mike wrote:
> Anyone figure out any information on this? i could not find anything
> at all

Here's the URL:

<http://www.hamgadgets.com/product_info.php?products_id=64>

-- 
Jim Barbour
WD8CHL


> 
> - Original Message - From: "Gary" <[EMAIL PROTECTED]> To:
>  Sent: Thursday, May 12, 2005 11:44
> PM Subject: [Repeater-Builder] Re: CWID
> 
> 
> 
>> Larry, You might want to check out the ID-O-MATIC that is sold by
>> N0AXS. This little Kit will run you about $20 bucks and works like
>> a champ!
>> 
>> Look up N0AXS or ID-O-MATIC on your search engine and he has a 
>> website where you can get this kit and other really neat items for
>>  repeaters!
>> 
>> I use this for an ID'er on one of my repeaters and it works as good
>>  as any of the $500 controllers that I have!
>> 
>> 73's and Happy Hamming Gary - W5GNB




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

RE: [Repeater-Builder] Re: CWID

[C Wayne Schuler]

Can you document the changes for us?
Wayne, ai9q


-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Larry Kemper
Sent: Friday, May 13, 2005 8:57 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: CWID

Guys
I did order the ID-O-Matic and installed it.  The only thing is such trash
with square wave output so built a little audio filter to smooth things out.
That is more pleasant to listen too.  Yes cw can be pleasant.. Also
users who complained of no beep now have it.

Thanks

WA0VUS
Larry Kemper
Muscatine, Iowa

[EMAIL PROTECTED]





 
Yahoo! Groups Links



 


-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005
 





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

Re: [Repeater-Builder] Re: CWID

[Larry Kemper]

Guys
I did order the ID-O-Matic and installed it.  The only thing is such trash
with square wave output so built a little audio filter to smooth things out.
That is more pleasant to listen too.  Yes cw can be pleasant.. Also
users who complained of no beep now have it.

Thanks

WA0VUS
Larry Kemper
Muscatine, Iowa

[EMAIL PROTECTED]





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

RE: [Repeater-Builder] Re: CWID

[C Wayne Schuler]

Try again. It worked for me.
Or go direct to their website.. http://www.hamgadgets.com/index.php
Wayne, AI9Q


-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
Sent: Friday, May 13, 2005 4:33 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: CWID

Anyone figure out any information on this? i could not find anything at all


- Original Message - 
From: "Gary" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, May 12, 2005 11:44 PM
Subject: [Repeater-Builder] Re: CWID


> Larry,
> You might want to check out the ID-O-MATIC that is sold by N0AXS.  
> This little Kit will run you about $20 bucks and works like a champ!
> 
> Look up N0AXS or ID-O-MATIC on your search engine and he has a 
> website where you can get this kit and other really neat items for 
> repeaters!
> 
> I use this for an ID'er on one of my repeaters and it works as good 
> as any of the $500 controllers that I have!
> 
> 73's and Happy Hamming
> Gary - W5GNB






 
Yahoo! Groups Links



 


-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005
 





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

Re: [Repeater-Builder] Re: CWID

[Mike]

Anyone figure out any information on this? i could not find anything at all


- Original Message - 
From: "Gary" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, May 12, 2005 11:44 PM
Subject: [Repeater-Builder] Re: CWID


> Larry,
> You might want to check out the ID-O-MATIC that is sold by N0AXS.  
> This little Kit will run you about $20 bucks and works like a champ!
> 
> Look up N0AXS or ID-O-MATIC on your search engine and he has a 
> website where you can get this kit and other really neat items for 
> repeaters!
> 
> I use this for an ID'er on one of my repeaters and it works as good 
> as any of the $500 controllers that I have!
> 
> 73's and Happy Hamming
> Gary - W5GNB






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

[Repeater-Builder] Re: CWID

[no6b]

Here's the 800 Hz BPF for the square wave outputs of the K-ID & ID-O-MATIC 
PIC IDers.

Bob NO6B



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 
<>

[Repeater-Builder] Re: CWID

[no6b1]

--- In Repeater-Builder@yahoogroups.com, "Gary" <[EMAIL PROTECTED]> wrote:
> Larry,
> You might want to check out the ID-O-MATIC that is sold by N0AXS.  
> This little Kit will run you about $20 bucks and works like a champ!
> 

Nice.  Like the K1EL K-ID PIC but with the activity timer.  Wish I had
known about this one a month ago.

> Look up N0AXS or ID-O-MATIC on your search engine and he has a 
> website where you can get this kit and other really neat items for 
> repeaters!

www.hamgadgets.com

> 
> I use this for an ID'er on one of my repeaters and it works as good 
> as any of the $500 controllers that I have!

Just be careful with that square wave output.  I built an 800 Hz BPF
for the output of the K-ID; I'll post the schematic in a separate message.

Bob NO6B






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

RE: [Repeater-Builder] Re: CWID

[Mike Besemer \(WM4B\)]

Dang, that ID-O-MATIC is so cool I ordered one on-the-spot!  I have NO idea
what I'll do with it, but that's beside the point!

-- de WM4B
Mike
Kathleen, GA
146.25/85

-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Gary
Sent: Thursday, May 12, 2005 11:44 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: CWID

Larry,
You might want to check out the ID-O-MATIC that is sold by N0AXS.  
This little Kit will run you about $20 bucks and works like a champ!

Look up N0AXS or ID-O-MATIC on your search engine and he has a 
website where you can get this kit and other really neat items for 
repeaters!

I use this for an ID'er on one of my repeaters and it works as good 
as any of the $500 controllers that I have!

73's and Happy Hamming
Gary - W5GNB



--- In Repeater-Builder@yahoogroups.com, Bob Dengler <[EMAIL PROTECTED]> 
wrote:
> At 5/4/2005 06:26 AM, you wrote:
> >Just was wondering what cwid is available new or used.  I am in 
need of a 
> >cwid for one of my repeaters.  I normally use the hamtronics diode 
matrix 
> >unit but they do not have them any more.  I have a RPT10 on the 
air that 
> >needs some identification so if anyone knows of one for sale or 
has any 
> >ideas please let me know.
> >
> >Thanks in advance.
> >
> >WA0VUS
> >Larry Kemper
> >Muscatine, Iowa
> >
> ><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED]
> 
> Not the easiest way, but definitely the cheapest: use K1EL's K-ID 
PIC: $8 
> shipped.  The hard part is adding:
> 
> -trigger & timing circuitry so it sends the ID every 10 minutes but 
only 
> while the repeater's in use
> 
> -audio filter to clean up the square wave output.
> 
> I've built a small interface board for my latest portapeater that 
uses the 
> K-ID chip.  I'm not 100% happy with the result as I was space & 
time 
> constrained (had to fit within the multi-freq. area in the G.E. MVP 
& only 
> had a few weeks to design, build & test), but it does work.  I can 
e-mail 
> you the schematic if you like & can even show you the result (will 
be 
> spending the Monday after Dayton in the Quad Cities area).
> 
> Bob NO6B








 
Yahoo! Groups Links



 








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

[Repeater-Builder] Re: CWID

[Gary]

Larry,
You might want to check out the ID-O-MATIC that is sold by N0AXS.  
This little Kit will run you about $20 bucks and works like a champ!

Look up N0AXS or ID-O-MATIC on your search engine and he has a 
website where you can get this kit and other really neat items for 
repeaters!

I use this for an ID'er on one of my repeaters and it works as good 
as any of the $500 controllers that I have!

73's and Happy Hamming
Gary - W5GNB



--- In Repeater-Builder@yahoogroups.com, Bob Dengler <[EMAIL PROTECTED]> 
wrote:
> At 5/4/2005 06:26 AM, you wrote:
> >Just was wondering what cwid is available new or used.  I am in 
need of a 
> >cwid for one of my repeaters.  I normally use the hamtronics diode 
matrix 
> >unit but they do not have them any more.  I have a RPT10 on the 
air that 
> >needs some identification so if anyone knows of one for sale or 
has any 
> >ideas please let me know.
> >
> >Thanks in advance.
> >
> >WA0VUS
> >Larry Kemper
> >Muscatine, Iowa
> >
> >[EMAIL PROTECTED]
> 
> Not the easiest way, but definitely the cheapest: use K1EL's K-ID 
PIC: $8 
> shipped.  The hard part is adding:
> 
> -trigger & timing circuitry so it sends the ID every 10 minutes but 
only 
> while the repeater's in use
> 
> -audio filter to clean up the square wave output.
> 
> I've built a small interface board for my latest portapeater that 
uses the 
> K-ID chip.  I'm not 100% happy with the result as I was space & 
time 
> constrained (had to fit within the multi-freq. area in the G.E. MVP 
& only 
> had a few weeks to design, build & test), but it does work.  I can 
e-mail 
> you the schematic if you like & can even show you the result (will 
be 
> spending the Monday after Dayton in the Quad Cities area).
> 
> Bob NO6B








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

[Repeater-Builder] Re: cwid-50b info.. never mind...

[skipp025]

Let us know what you find Dave... I have 
a circuit diagram for it, you might have 
mentioned something at lunch today. 

It's a prom based ID unit, not a bad 
circuit. 

skipp 

> "na6df" <[EMAIL PROTECTED]> wrote:
> 
> I found them, wrong name. Fired off an email inquiring...
> 
> na6df







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/