RE: [sniffer] Sniffer taking a long time?
OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent sniffer using the instructions from this post: http://www.mail-archive.com/sniffer@sortmonster.com/msg00169.html This uses SRVANY.exe. I conjectured that possibly the service needed a home directory, so I added an AppDirectory value to the sniffer service's Parameters key in the registry. This value is set to the directory sniffer resides in. I also (based on my reading of the srvany.exe documentation) added another value to the same key called AppParameters. This is set to my auth code followed by a space, followed by the word persistent. Now when I start the service, the time spent processing a single message goes down to something around 2 seconds, but is still far longer than the non-service version. I also still had no .stat file in my sniffer directory. I did get a *.SVR file, which I never got before. So then I'm thinking, let's just make sure that I have the latest version of sniffer. I downloaded that, did the necessary renaming of the files and then started the service. NOW there is a *.persistent.stat file. However, the scan time is still at around 2 seconds. Average Scan times (based on average scan times of 5 emails each): Without sniffer service running: .033 seconds With sniffer service running: 2.244 seconds The *.persistent.stat file has the following contents: TicToc: 1122990610 Loop: 512 Poll: 445 Jobs: 34 Secs: 303 Msg/Min: 6.73267 Current-Load: 8.69565 Average-Load: 10.6371 Any suggestions? Thanks, Dan Horne This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
Re: [sniffer] Sniffer taking a long time?
Dan, I seem to recall trying to use the AppParameters key and having difficulty with it. I think that you might want to try removing that key and putting everything in the Parameters key, or at least that works for me. If you change HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Sniffer\Parameters in RegEdit to the following it might fix the issue that you are having: C:\IMail\Declude\Sniffer\***RULEBASE-NAME***.exe ***AUTH-CODE*** persistent You should of course adjust the path and service name as well. The directions that I provided are working perfectly on my server so far as I can tell. I'm running dual 3.2 Ghz 1 MB cache Xeons with 5 x 15,000 RPM drives in RAID 5. The following three debug log entries shows between 300 ms and 550 ms per message: 08/02/2005 14:19:47.113 QB93D976201222A43 [2616] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB93D976201222A43.SMD 08/02/2005 14:19:47.676 QB93D976201222A43 [2616] SNIFFER-IP: External program reports exit code of 61 - 08/02/2005 14:19:47.488 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB9418A4800EC2A49.SMD 08/02/2005 14:19:47.770 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program reports exit code of 51 - 08/02/2005 14:19:49.879 QB943711501382A4D [6388] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB943711501382A4D.SMD 08/02/2005 14:19:50.176 QB943711501382A4D [6388] SNIFFER-IP: External program reports exit code of 59 My stat file shows the following: TicToc: 1122992104 Loop: 154 Poll: 0 Jobs: 118392 Secs: 155137 Msg/Min: 45.7887 Current-Load: 24.4275 Average-Load: 23.8719 I'm not sure why people use FireDaemon for this. My experience with SRVANY.exe has been absolutely flawless since I integrated this, and it has worked on both Win2k and Windows 2003. Matt Dan Horne wrote: OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent sniffer using the instructions from this post: http://www.mail-archive.com/sniffer@sortmonster.com/msg00169.html This uses SRVANY.exe. I conjectured that possibly the service needed a home directory, so I added an AppDirectory value to the sniffer service's "Parameters" key in the registry. This value is set to the directory sniffer resides in. I also (based on my reading of the srvany.exe documentation) added another value to the same key called AppParameters. This is set to my auth code followed by a space, followed by the word persistent. Now when I start the service, the time spent processing a single message goes down to something around 2 seconds, but is still far longer than the non-service version. I also still had no .stat file in my sniffer directory. I did get a *.SVR file, which I never got before. So then I'm thinking, let's just make sure that I have the latest version of sniffer. I downloaded that, did the necessary renaming of the files and then started the service. NOW there is a *.persistent.stat file. However, the scan time is still at around 2 seconds. Average Scan times (based on average scan times of 5 emails each): Without sniffer service running: .033 seconds With sniffer service running: 2.244 seconds The *.persistent.stat file has the following contents: TicToc: 1122990610 Loop: 512 Poll: 445 Jobs: 34 Secs: 303 Msg/Min: 6.73267 Current-Load: 8.69565 Average-Load: 10.6371 Any suggestions? Thanks, Dan Horne This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html -- = MailPure custom filters for Declude JunkMail Pro. http://www.mailpure.com/software/ =
RE: [sniffer] Sniffer taking a long time?
I removed the AppParameters value and put the authcode and persistent back in the Application value where it was before. It didn't make any difference at all in the processing time, still right around 2 seconds. I don't know how your setup is working without at least the AppDirectory value, because mine didn't start working until I put that in, but if it is, I can't argue. My server load isn't anywhere near yours, so I don't see what the problem could be with mine. Oh well, unless Pete responds with a suggestion, I guess I'll just keep using the non-service version. Thanks anyway. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of MattSent: Tuesday, August 02, 2005 2:37 PMTo: sniffer@SortMonster.comSubject: Re: [sniffer] Sniffer taking a long time? Dan,I seem to recall trying to use the AppParameters key and having difficulty with it. I think that you might want to try removing that key and putting everything in the Parameters key, or at least that works for me. If you change HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Sniffer\Parameters in RegEdit to the following it might fix the issue that you are having: C:\IMail\Declude\Sniffer\***RULEBASE-NAME***.exe ***AUTH-CODE*** persistentYou should of course adjust the path and service name as well.The directions that I provided are working perfectly on my server so far as I can tell. I'm running dual 3.2 Ghz 1 MB cache Xeons with 5 x 15,000 RPM drives in RAID 5. The following three debug log entries shows between 300 ms and 550 ms per message: 08/02/2005 14:19:47.113 QB93D976201222A43 [2616] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB93D976201222A43.SMD08/02/2005 14:19:47.676 QB93D976201222A43 [2616] SNIFFER-IP: External program reports exit code of 61-08/02/2005 14:19:47.488 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB9418A4800EC2A49.SMD08/02/2005 14:19:47.770 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program reports exit code of 51-08/02/2005 14:19:49.879 QB943711501382A4D [6388] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB943711501382A4D.SMD08/02/2005 14:19:50.176 QB943711501382A4D [6388] SNIFFER-IP: External program reports exit code of 59My stat file shows the following: TicToc: 1122992104Loop: 154Poll: 0Jobs: 118392Secs: 155137Msg/Min: 45.7887Current-Load: 24.4275 Average-Load: 23.8719 I'm not sure why people use FireDaemon for this. My experience with SRVANY.exe has been absolutely flawless since I integrated this, and it has worked on both Win2k and Windows 2003.MattDan Horne wrote: OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent sniffer using the instructions from this post: http://www.mail-archive.com/sniffer@sortmonster.com/msg00169.html This uses SRVANY.exe. I conjectured that possibly the service needed a home directory, so I added an AppDirectory value to the sniffer service's "Parameters" key in the registry. This value is set to the directory sniffer resides in. I also (based on my reading of the srvany.exe documentation) added another value to the same key called AppParameters. This is set to my auth code followed by a space, followed by the word persistent. Now when I start the service, the time spent processing a single message goes down to something around 2 seconds, but is still far longer than the non-service version. I also still had no .stat file in my sniffer directory. I did get a *.SVR file, which I never got before. So then I'm thinking, let's just make sure that I have the latest version of sniffer. I downloaded that, did the necessary renaming of the files and then started the service. NOW there is a *.persistent.stat file. However, the scan time is still at around 2 seconds. Average Scan times (based on average scan times of 5 emails each): Without sniffer service running: .033 seconds With sniffer service running: 2.244 seconds The *.persistent.stat file has the following contents: TicToc: 1122990610 Loop: 512 Poll: 445 Jobs: 34 Secs: 303 Msg/Min: 6.73267 Current-Load: 8.69565 Average-Load: 10.6371 Any suggestions? Thanks, Dan Horne This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html -- = MailPure custom filters for Declude JunkMail Pro. http://www.mailpure.com/software/ =
RE: [sniffer] Sniffer taking a long time?
No, I followed your instructions exactly (and not for the first time). I didn't add those extra values until today. Prior to adding the AppDirectory value, the service was taking a minute to scan emails; after adding it the scan time went to around 2 seconds. I can't get it any lower than that. Initially mine was set up exactly as you said, with only "Application" containing the path, authcode and persistent. Today after hearing no suggestions from the list, and based on recent list messages mentioning the home directory for the service, I looked at the srvany.exe doco to find out how to give it a home directory. That's when I added AppDirectory. I also saw and added AppParameters at the same time and added those as well, though they seem not to be needed. Prior to adding the AppDirectory value, I never got any .stat file or any .SVR file in my sniffer dir. After adding that value and starting the service those files appeared. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of MattSent: Tuesday, August 02, 2005 3:24 PMTo: sniffer@SortMonster.comSubject: Re: [sniffer] Sniffer taking a long time? Dan,There is no AppDirectory value on my server either. The Parameters key has only one value under it besides Default which is "Application", and it contains exactly what I provided below. Could it be that you tried to hard to get everything right by tweaking these additional keys?Something else. Did you make sure that the Sniffer service that you created was started? No doubt it will work if you follow those directions to a T, and there aren't any issues with your server apart from this.MattDan Horne wrote: I removed the AppParameters value and put the authcode and persistent back in the Application value where it was before. It didn't make any difference at all in the processing time, still right around 2 seconds. I don't know how your setup is working without at least the AppDirectory value, because mine didn't start working until I put that in, but if it is, I can't argue. My server load isn't anywhere near yours, so I don't see what the problem could be with mine. Oh well, unless Pete responds with a suggestion, I guess I'll just keep using the non-service version. Thanks anyway. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of MattSent: Tuesday, August 02, 2005 2:37 PMTo: sniffer@SortMonster.comSubject: Re: [sniffer] Sniffer taking a long time?Dan,I seem to recall trying to use the AppParameters key and having difficulty with it. I think that you might want to try removing that key and putting everything in the Parameters key, or at least that works for me. If you change HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Sniffer\Parameters in RegEdit to the following it might fix the issue that you are having: C:\IMail\Declude\Sniffer\***RULEBASE-NAME***.exe ***AUTH-CODE*** persistentYou should of course adjust the path and service name as well.The directions that I provided are working perfectly on my server so far as I can tell. I'm running dual 3.2 Ghz 1 MB cache Xeons with 5 x 15,000 RPM drives in RAID 5. The following three debug log entries shows between 300 ms and 550 ms per message: 08/02/2005 14:19:47.113 QB93D976201222A43 [2616] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB93D976201222A43.SMD08/02/2005 14:19:47.676 QB93D976201222A43 [2616] SNIFFER-IP: External program reports exit code of 61-08/02/2005 14:19:47.488 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB9418A4800EC2A49.SMD08/02/2005 14:19:47.770 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program reports exit code of 51-08/02/2005 14:19:49.879 QB943711501382A4D [6388] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB943711501382A4D.SMD08/02/2005 14:19:50.176 QB943711501382A4D [6388] SNIFFER-IP: External program reports exit code of 59My stat file shows the following: TicToc: 1122992104Loop: 154Poll: 0Jobs: 118392Secs: 155137Msg/Min: 45.7887Current-Load: 24.4275 Average-Load: 23.8719 I'm not sure why people use FireDaemon for this. My experience with SRVANY.exe has been absolutely flawless since I integrated this, and it has worked on both Win2k and Windows 2003.MattDan Horne wrote: OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent
Re: [sniffer] Sniffer taking a long time?
Without regard to content I believe the edits would be made in CurrentControlSet - not in ControlSetxxx - the later are the backups. -Nick Matt wrote: Dan, I seem to recall trying to use the AppParameters key and having difficulty with it. I think that you might want to try removing that key and putting everything in the Parameters key, or at least that works for me. If you change HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Sniffer\Parameters in RegEdit to the following it might fix the issue that you are having: C:\IMail\Declude\Sniffer\ ***RULEBASE-NAME*** .exe ***AUTH-CODE*** persistent You should of course adjust the path and service name as well. The directions that I provided are working perfectly on my server so far as I can tell. I'm running dual 3.2 Ghz 1 MB cache Xeons with 5 x 15,000 RPM drives in RAID 5. The following three debug log entries shows between 300 ms and 550 ms per message: 08/02/2005 14:19:47.113 QB93D976201222A43 [2616] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\ executable .exe auth-code F:\\DB93D976201222A43.SMD 08/02/2005 14:19:47.676 QB93D976201222A43 [2616] SNIFFER-IP: External program reports exit code of 61 - 08/02/2005 14:19:47.488 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\ executable .exe auth-code F:\\DB9418A4800EC2A49.SMD 08/02/2005 14:19:47.770 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program reports exit code of 51 - 08/02/2005 14:19:49.879 QB943711501382A4D [6388] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\ executable .exe auth-code F:\\DB943711501382A4D.SMD 08/02/2005 14:19:50.176 QB943711501382A4D [6388] SNIFFER-IP: External program reports exit code of 59 My stat file shows the following: TicToc: 1122992104 Loop: 154 Poll: 0 Jobs: 118392 Secs: 155137 Msg/Min: 45.7887 Current-Load: 24.4275 Average-Load: 23.8719 I'm not sure why people use FireDaemon for this. My experience with SRVANY.exe has been absolutely flawless since I integrated this, and it has worked on both Win2k and Windows 2003. Matt Dan Horne wrote: OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent sniffer using the instructions from this post: http://www.mail-archive.com/sniffer@sortmonster.com/msg00169.html This uses SRVANY.exe. I conjectured that possibly the service needed a home directory, so I added an AppDirectory value to the sniffer service's "Parameters" key in the registry. This value is set to the directory sniffer resides in. I also (based on my reading of the srvany.exe documentation) added another value to the same key called AppParameters. This is set to my auth code followed by a space, followed by the word persistent. Now when I start the service, the time spent processing a single message goes down to something around 2 seconds, but is still far longer than the non-service version. I also still had no .stat file in my sniffer directory. I did get a *.SVR file, which I never got before. So then I'm thinking, let's just make sure that I have the latest version of sniffer. I downloaded that, did the necessary renaming of the files and then started the service. NOW there is a *.persistent.stat file. However, the scan time is still at around 2 seconds. Average Scan times (based on average scan times of 5 emails each): Without sniffer service running: .033 seconds With sniffer service running: 2.244 seconds The *.persistent.stat file has the following contents: TicToc: 1122990610 Loop: 512 Poll: 445 Jobs: 34 Secs: 303 Msg/Min: 6.73267 Current-Load: 8.69565 Average-Load: 10.6371 Any suggestions? Thanks, Dan Horne This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html -- = MailPure custom filters for Declude JunkMail Pro. http://www.mailpure.com/software/ =
Re: [sniffer] Sniffer taking a long time?
You are correct. My bad. Matt Nick Hayer wrote: Without regard to content I believe the edits would be made in CurrentControlSet - not in ControlSetxxx - the later are the backups. -Nick Matt wrote: Dan, I seem to recall trying to use the AppParameters key and having difficulty with it. I think that you might want to try removing that key and putting everything in the Parameters key, or at least that works for me. If you change HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Sniffer\Parameters in RegEdit to the following it might fix the issue that you are having: C:\IMail\Declude\Sniffer\ ***RULEBASE-NAME*** .exe ***AUTH-CODE*** persistent You should of course adjust the path and service name as well. The directions that I provided are working perfectly on my server so far as I can tell. I'm running dual 3.2 Ghz 1 MB cache Xeons with 5 x 15,000 RPM drives in RAID 5. The following three debug log entries shows between 300 ms and 550 ms per message: 08/02/2005 14:19:47.113 QB93D976201222A43 [2616] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\ executable .exe auth-code F:\\DB93D976201222A43.SMD 08/02/2005 14:19:47.676 QB93D976201222A43 [2616] SNIFFER-IP: External program reports exit code of 61 - 08/02/2005 14:19:47.488 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\ executable .exe auth-code F:\\DB9418A4800EC2A49.SMD 08/02/2005 14:19:47.770 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program reports exit code of 51 - 08/02/2005 14:19:49.879 QB943711501382A4D [6388] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\ executable .exe auth-code F:\\DB943711501382A4D.SMD 08/02/2005 14:19:50.176 QB943711501382A4D [6388] SNIFFER-IP: External program reports exit code of 59 My stat file shows the following: TicToc: 1122992104 Loop: 154 Poll: 0 Jobs: 118392 Secs: 155137 Msg/Min: 45.7887 Current-Load: 24.4275 Average-Load: 23.8719 I'm not sure why people use FireDaemon for this. My experience with SRVANY.exe has been absolutely flawless since I integrated this, and it has worked on both Win2k and Windows 2003. Matt Dan Horne wrote: OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent sniffer using the instructions from this post: http://www.mail-archive.com/sniffer@sortmonster.com/msg00169.html This uses SRVANY.exe. I conjectured that possibly the service needed a home directory, so I added an AppDirectory value to the sniffer service's "Parameters" key in the registry. This value is set to the directory sniffer resides in. I also (based on my reading of the srvany.exe documentation) added another value to the same key called AppParameters. This is set to my auth code followed by a space, followed by the word persistent. Now when I start the service, the time spent processing a single message goes down to something around 2 seconds, but is still far longer than the non-service version. I also still had no .stat file in my sniffer directory. I did get a *.SVR file, which I never got before. So then I'm thinking, let's just make sure that I have the latest version of sniffer. I downloaded that, did the necessary renaming of the files and then started the service. NOW there is a *.persistent.stat file. However, the scan time is still at around 2 seconds. Average Scan times (based on average scan times of 5 emails each): Without sniffer service running: .033 seconds With sniffer service running: 2.244 seconds The *.persistent.stat file has the following contents: TicToc: 1122990610 Loop: 512 Poll: 445 Jobs: 34 Secs: 303 Msg/Min: 6.73267 Current-Load: 8.69565 Average-Load: 10.6371 Any suggestions? Thanks, Dan Horne This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html -- = MailPure custom filters for Declude JunkMail Pro. http://www.mailpure.com/software/ = -- = MailPure custom filters for Declude JunkMail Pro. http://www.mailpure.com/software/ =
Re[2]: [sniffer] Sniffer taking a long time?
After following through all of this and looking at the .stat file, I think I see what's going on. Now that it is running and producing a .stat file, the flow rate is very low. According to the stat data, about 6 msgs / minute. Note the poll and loop times are in the 450 - 550 ms range. SNF with the persistent engine is built for high throughput, but it's also built to play nice. The maximum poll time gets up to 2 seconds or so (sound familiar?) If there are no messages for a while, then everything slows down until the first message goes through. For that first message, the SNF client will probably wait about 2 seconds before looking for it's result because that's what the stat file will tell it to do. Since the next message probably won't come around for a few seconds, that next message will probably wait about 2 seconds also. If you were doing 6 messages a second then all of the times would be much lower and so would the individual delays. When you turn off the persistent instance, each new message causes a client to look and see if there are any other peers acting a servers... Since the messages are far and few between, the client will elect to be a server (momentarily), will find no work but it's own, will process it's own message and leave. -- This is the automatic peer-server mode. It will always work like this unless more than one message is being processed at the same moment. In peer-server mode, since there is nothing else going on and no persistent instance to coordinate the operations, each message will get processed as fast as the rulebase can be loaded and then the program will drop. When the persistent instance is introduced, it sets the pace - and sicne there are no other messages, each client will wait about 2 seconds (or half a second or so with the .stat file contents you show) before it begins looking for it's results. The server instance will also wait a bit before looking for new jobs so that the file system isn't constantly being scanned. Of course, if a burst of messages come through then the pacing will speed up as much as necessary to keep up with the volume. Hope this helps, _M On Tuesday, August 2, 2005, 3:38:52 PM, Dan wrote: DH No, I followed your instructions exactly (and not for the DH first time). I didn't add those extra values until today. Prior DH to adding the AppDirectory value, the service was taking a minute DH to scan emails; after adding it the scan time went to around 2 DH seconds. I can't get it any lower than that. Initially mine was DH set up exactly as you said, with only Application containing DH the path, authcode and persistent. Today after hearing no DH suggestions from the list, and based on recent list messages DH mentioning the home directory for the service, I looked at the DH srvany.exe doco to find out how to give it a home directory. DH That's when I added AppDirectory. I also saw and added DH AppParameters at the same time and added those as well, though DH they seem not to be needed. DH DH Prior to adding the AppDirectory value, I never got any DH .stat file or any .SVR file in my sniffer dir. After adding that DH value and starting the service those files appeared. DH DH DH From: [EMAIL PROTECTED] DH [mailto:[EMAIL PROTECTED] On Behalf Of Matt DH Sent: Tuesday, August 02, 2005 3:24 PM DH To: sniffer@SortMonster.com DH Subject: Re: [sniffer] Sniffer taking a long time? DH Dan, DH There is no AppDirectory value on my servereither. The DH Parameters key has only one value under it besides Default DH which is Application, and it contains exactly what I provided DH below. Could it be that you tried to hard to get everything DH right by tweaking theseadditional keys? DH Something else. Did you make sure that theSniffer DH service that you created was started? No doubt it will work if DH you follow those directions to a T, and there aren't any issues DH with yourserver apart from this. DH Matt DH Dan Horne wrote: DH I removed the AppParameters value and put the authcode DH and persistent back in the Application value where it was before. DH It didn't make any difference at all in the processing time, DH still right around 2 seconds. I don't know how your setup is DH working without at least the AppDirectory value, because mine DH didn't start working until I put that in, but if it is, I DH can't argue. My server load isn't anywhere near yours, so I DH don't see what the problem could be with mine. Oh well, unless DH Pete responds with a suggestion, I guess I'll just keep using the DH non-service version. DH DH Thanks anyway. DH From:[EMAIL PROTECTED] DH [mailto:[EMAIL PROTECTED] On Behalf Of Matt DH Sent: Tuesday, August 02, 2005 2:37PM DH To:sniffer@SortMonster.com DH Subject: Re: [sniffer] Sniffer taking a longtime? DH Dan, DH I seem to recall trying to use theAppParameters
RE: Re[2]: [sniffer] Sniffer taking a long time?
So basically, what you are saying is that my volume is really too low to take advantage of the persistent sniffer (and such may actually decrease my performance), and I should stick with the non-service version. Is that right? That is about what I thought (without the details of how sniffer works, I just wanted to be sure). Thanks, Pete. Dan Horne -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pete McNeil Sent: Tuesday, August 02, 2005 4:09 PM To: Dan Horne Subject: Re[2]: [sniffer] Sniffer taking a long time? After following through all of this and looking at the .stat file, I think I see what's going on. Now that it is running and producing a .stat file, the flow rate is very low. According to the stat data, about 6 msgs / minute. Note the poll and loop times are in the 450 - 550 ms range. SNF with the persistent engine is built for high throughput, but it's also built to play nice. The maximum poll time gets up to 2 seconds or so (sound familiar?) If there are no messages for a while, then everything slows down until the first message goes through. For that first message, the SNF client will probably wait about 2 seconds before looking for it's result because that's what the stat file will tell it to do. Since the next message probably won't come around for a few seconds, that next message will probably wait about 2 seconds also. If you were doing 6 messages a second then all of the times would be much lower and so would the individual delays. When you turn off the persistent instance, each new message causes a client to look and see if there are any other peers acting a servers... Since the messages are far and few between, the client will elect to be a server (momentarily), will find no work but it's own, will process it's own message and leave. -- This is the automatic peer-server mode. It will always work like this unless more than one message is being processed at the same moment. In peer-server mode, since there is nothing else going on and no persistent instance to coordinate the operations, each message will get processed as fast as the rulebase can be loaded and then the program will drop. When the persistent instance is introduced, it sets the pace - and sicne there are no other messages, each client will wait about 2 seconds (or half a second or so with the .stat file contents you show) before it begins looking for it's results. The server instance will also wait a bit before looking for new jobs so that the file system isn't constantly being scanned. Of course, if a burst of messages come through then the pacing will speed up as much as necessary to keep up with the volume. Hope this helps, _M On Tuesday, August 2, 2005, 3:38:52 PM, Dan wrote: DH No, I followed your instructions exactly (and not for the first DH time). I didn't add those extra values until today. Prior to DH adding the AppDirectory value, the service was taking a minute to DH scan emails; after adding it the scan time went to around 2 DH seconds. I can't get it any lower than that. Initially mine was DH set up exactly as you said, with only Application containing the DH path, authcode and persistent. Today after hearing no suggestions DH from the list, and based on recent list messages mentioning the home DH directory for the service, I looked at the srvany.exe doco to find DH out how to give it a home directory. DH That's when I added AppDirectory. I also saw and added DH AppParameters at the same time and added those as well, though they DH seem not to be needed. DH DH Prior to adding the AppDirectory value, I never got any .stat file DH or any .SVR file in my sniffer dir. After adding that value and DH starting the service those files appeared. DH DH DH From: [EMAIL PROTECTED] DH [mailto:[EMAIL PROTECTED] On Behalf Of Matt DH Sent: Tuesday, August 02, 2005 3:24 PM DH To: sniffer@SortMonster.com DH Subject: Re: [sniffer] Sniffer taking a long time? DH Dan, DH There is no AppDirectory value on my servereither. The DH Parameters key has only one value under it besides Default DH which is Application, and it contains exactly what I provided DH below. Could it be that you tried to hard to get everything DH right by tweaking theseadditional keys? DH Something else. Did you make sure that theSniffer DH service that you created was started? No doubt it will work if DH you follow those directions to a T, and there aren't any issues DH with yourserver apart from this. DH Matt DH Dan Horne wrote: DH I removed the AppParameters value and put the authcode DH and persistent back in the Application value where it was before. DH It didn't make any difference at all in the processing time, DH still right around 2
Re[4]: [sniffer] Sniffer taking a long time?
Well, it's not going to hurt your performance at all (a 2 second delay on each email is not going to be noticed in most cases - email is not IM after all). That said, the persistent mode is not necessary either though It will help if you get a burst of high activity. _M On Tuesday, August 2, 2005, 4:24:11 PM, Dan wrote: DH So basically, what you are saying is that my volume is really DH too low to take advantage of the persistent sniffer (and such may DH actually decrease my performance), and I should stick with the DH non-service version. Is that right? That is about what I thought DH (without the details of how sniffer works, I just wanted to be DH sure). DH Thanks, Pete. DH Dan Horne -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pete McNeil Sent: Tuesday, August 02, 2005 4:09 PM To: Dan Horne Subject: Re[2]: [sniffer] Sniffer taking a long time? After following through all of this and looking at the .stat file, I think I see what's going on. Now that it is running and producing a .stat file, the flow rate is very low. According to the stat data, about 6 msgs / minute. Note the poll and loop times are in the 450 - 550 ms range. SNF with the persistent engine is built for high throughput, but it's also built to play nice. The maximum poll time gets up to 2 seconds or so (sound familiar?) If there are no messages for a while, then everything slows down until the first message goes through. For that first message, the SNF client will probably wait about 2 seconds before looking for it's result because that's what the stat file will tell it to do. Since the next message probably won't come around for a few seconds, that next message will probably wait about 2 seconds also. If you were doing 6 messages a second then all of the times would be much lower and so would the individual delays. When you turn off the persistent instance, each new message causes a client to look and see if there are any other peers acting a servers... Since the messages are far and few between, the client will elect to be a server (momentarily), will find no work but it's own, will process it's own message and leave. -- This is the automatic peer-server mode. It will always work like this unless more than one message is being processed at the same moment. In peer-server mode, since there is nothing else going on and no persistent instance to coordinate the operations, each message will get processed as fast as the rulebase can be loaded and then the program will drop. When the persistent instance is introduced, it sets the pace - and sicne there are no other messages, each client will wait about 2 seconds (or half a second or so with the .stat file contents you show) before it begins looking for it's results. The server instance will also wait a bit before looking for new jobs so that the file system isn't constantly being scanned. Of course, if a burst of messages come through then the pacing will speed up as much as necessary to keep up with the volume. Hope this helps, _M On Tuesday, August 2, 2005, 3:38:52 PM, Dan wrote: DH No, I followed your instructions exactly (and not for the first DH time). I didn't add those extra values until today. Prior to DH adding the AppDirectory value, the service was taking a minute to DH scan emails; after adding it the scan time went to around 2 DH seconds. I can't get it any lower than that. Initially mine was DH set up exactly as you said, with only Application containing the DH path, authcode and persistent. Today after hearing no suggestions DH from the list, and based on recent list messages mentioning the home DH directory for the service, I looked at the srvany.exe doco to find DH out how to give it a home directory. DH That's when I added AppDirectory. I also saw and added DH AppParameters at the same time and added those as well, though they DH seem not to be needed. DH DH Prior to adding the AppDirectory value, I never got any .stat file DH or any .SVR file in my sniffer dir. After adding that value and DH starting the service those files appeared. DH DH DH From: [EMAIL PROTECTED] DH [mailto:[EMAIL PROTECTED] On Behalf Of Matt DH Sent: Tuesday, August 02, 2005 3:24 PM DH To: sniffer@SortMonster.com DH Subject: Re: [sniffer] Sniffer taking a long time? DH Dan, DH There is no AppDirectory value on my servereither. The DH Parameters key has only one value under it besides Default DH which is Application, and it contains exactly what I provided DH below. Could it be that you tried to hard to get everything DH right by tweaking theseadditional keys? DH Something else. Did you make sure that theSniffer DH service that you created was started? No doubt it will work if DH you follow those directions to a T, and there aren't
Re: [sniffer] Sniffer taking a long time?
Dan, There is no AppDirectory value on my server either. The Parameters key has only one value under it besides Default which is "Application", and it contains exactly what I provided below. Could it be that you tried to hard to get everything right by tweaking these additional keys? Something else. Did you make sure that the Sniffer service that you created was started? No doubt it will work if you follow those directions to a T, and there aren't any issues with your server apart from this. Matt Dan Horne wrote: I removed the AppParameters value and put the authcode and persistent back in the Application value where it was before. It didn't make any difference at all in the processing time, still right around 2 seconds. I don't know how your setup is working without at least the AppDirectory value, because mine didn't start working until I put that in, but if it is, I can't argue. My server load isn't anywhere near yours, so I don't see what the problem could be with mine. Oh well, unless Pete responds with a suggestion, I guess I'll just keep using the non-service version. Thanks anyway. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Matt Sent: Tuesday, August 02, 2005 2:37 PM To: sniffer@SortMonster.com Subject: Re: [sniffer] Sniffer taking a long time? Dan, I seem to recall trying to use the AppParameters key and having difficulty with it. I think that you might want to try removing that key and putting everything in the Parameters key, or at least that works for me. If you change HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Sniffer\Parameters in RegEdit to the following it might fix the issue that you are having: C:\IMail\Declude\Sniffer\***RULEBASE-NAME***.exe ***AUTH-CODE*** persistent You should of course adjust the path and service name as well. The directions that I provided are working perfectly on my server so far as I can tell. I'm running dual 3.2 Ghz 1 MB cache Xeons with 5 x 15,000 RPM drives in RAID 5. The following three debug log entries shows between 300 ms and 550 ms per message: 08/02/2005 14:19:47.113 QB93D976201222A43 [2616] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB93D976201222A43.SMD 08/02/2005 14:19:47.676 QB93D976201222A43 [2616] SNIFFER-IP: External program reports exit code of 61 - 08/02/2005 14:19:47.488 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB9418A4800EC2A49.SMD 08/02/2005 14:19:47.770 QB9418A4800EC2A49 [6196] SNIFFER-IP: External program reports exit code of 51 - 08/02/2005 14:19:49.879 QB943711501382A4D [6388] SNIFFER-IP: External program started: C:\IMail\Declude\Sniffer\executable.exe auth-code F:\\DB943711501382A4D.SMD 08/02/2005 14:19:50.176 QB943711501382A4D [6388] SNIFFER-IP: External program reports exit code of 59 My stat file shows the following: TicToc: 1122992104 Loop: 154 Poll: 0 Jobs: 118392 Secs: 155137 Msg/Min: 45.7887 Current-Load: 24.4275 Average-Load: 23.8719 I'm not sure why people use FireDaemon for this. My experience with SRVANY.exe has been absolutely flawless since I integrated this, and it has worked on both Win2k and Windows 2003. Matt Dan Horne wrote: OK, I have managed to get SOMETHING working, but it still seems too slow and something is still not right. I originally set up the persistent sniffer using the instructions from this post: http://www.mail-archive.com/sniffer@sortmonster.com/msg00169.html This uses SRVANY.exe. I conjectured that possibly the service needed a home directory, so I added an AppDirectory value to the sniffer service's "Parameters" key in the registry. This value is set to the directory sniffer resides in. I also (based on my reading of the srvany.exe documentation) added another value to the same key called AppParameters. This is set to my auth code followed by a space, followed by the word persistent. Now when I start the service, the time spent processing a single message goes down to something around 2 seconds, but is still far longer than the non-service version. I also still had no .stat file in my sniffer directory. I did get a *.SVR file, which I never got before. So then I'm thinking, let's just make sure that I have the latest version of sniffer. I downloaded that, did the necessary renaming of the files and then started the service. NOW there is a *.persistent.stat file. However, the scan time is still at around 2 seconds. Average Scan times (based on average scan times of 5 emails each): Without sniffer service running: .033 seconds With sniffer service running: 2.244 seconds The *.persistent.stat file has the following contents: TicToc: 1122990610 Loop: 512 Poll: 445 Jobs: 34