[Soekris] Net5501 boot failure on previously-working OpenBSD 4.3 system?
Has anybody seen this particular OpenBSD boot failure, with "Unknown error: code 102"? Thanks, Kevin comBIOS ver. 1.33b 20080501 Copyright (C) 2000-2008 Soekris Engineering. net5501 0512 Mbyte MemoryCPU Geode LX 500 Mhz Pri Mas CF CARD 2GB LBA Xlt 971-64-63 1957 Mbyte . . . 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. Using drive 0, partition 3. Loading... probing: pc0 com0 com1 pci mem[639K 511M a20=on] disk: hd0+* >> OpenBSD/i386 BOOT 3.01 open(hd0a:/etc/boot.conf): Unknown error: code 102 boot> booting hd0a:/bsd: open hd0a:/bsd: Unknown error: code 102 failed(102). will try /bsd boot> booting hd0a:/bsd: open hd0a:/bsd: Invalid argument failed(22). will try /bsd Turning timeout off. boot> ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] 19" Rackmount Case for the 5501
K K wrote: > On 6/4/08, Carlos Castro <[EMAIL PROTECTED]> wrote: >> Does anyone know of a 3rd party vendor who might have a 19" rack mount case >> for the net5501 boards? > > We bought the Kerberos.si 19" rack case, the one shown at https://kd85.com/ > > The case works great, is sturdier and more professional than the > standard lime sherbert colored case. I've never liked the barrel > connector for power, with this case the external power connection is a > standard 2-pin laptop power cable. > > My only real complaint about all the cases (Soekris and 3rd party) is, > none make the CF externally accessible, nor are trivially modifiable > (e.g. with a nibbler) to expose the card. You could always get good with a dremel tool ;) I've done some modifications to the original case to get certain pci cards to fit (the Rhino 8 port analog card pairs up nicely but requires two cuts with the dremel to fit right) Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] 19" Rackmount Case for the 5501
On 6/4/08, Carlos Castro <[EMAIL PROTECTED]> wrote: > Does anyone know of a 3rd party vendor who might have a 19" rack mount case > for the net5501 boards? We bought the Kerberos.si 19" rack case, the one shown at https://kd85.com/ The case works great, is sturdier and more professional than the standard lime sherbert colored case. I've never liked the barrel connector for power, with this case the external power connection is a standard 2-pin laptop power cable. My only real complaint about all the cases (Soekris and 3rd party) is, none make the CF externally accessible, nor are trivially modifiable (e.g. with a nibbler) to expose the card. Kevin ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] 19" Rackmount Case for the 5501
On 2008-06-04, Carlos Castro <[EMAIL PROTECTED]> wrote: > Does anyone know of a 3rd party vendor who might have a 19" rack mount case > for the net5501 boards? http://wiki.soekris.info/Alternative_chassis ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
[Soekris] 19" Rackmount Case for the 5501
Does anyone know of a 3rd party vendor who might have a 19" rack mount case for the net5501 boards? ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech