Re: FW: Broadcom BCM5787
Daniel Rapp wrote: > Anybody have any ideas ? otherwise I will have to send the machine back.. > .. > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 3.0 @ 0xf/0xdc04 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfda50/416 (24 entries) > pcibios0: bad IRQ table checksum > pcibios0: PCI BIOS has 25 Interrupt Routing table entries > pcibios0: PCI Exclusive IRQs: 5 7 10 11 > pcibios0: no compatible PCI ICU found > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #2 is the last bus > ... Hi, What about trying ACPI? those pcibios warnings don't look very pleasant.. boot> boot -c UKC> disable apm UKC> quit Perhaps that may work. -Brynet.
Re: FW: Broadcom BCM5787
> Date: Wed, 7 Oct 2009 14:23:01 +0200 > From: "Daniel Rapp" > > Still some problems.. > > System is uppdated to current.. > > Hangs at " bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, > BCM5754/5787 A2 (0xb002)" > > > Anybody have any ideas ? otherwise I will have to send the machine back.. Can you boot the machine with those bge's disabled (boot -c, disable bge at the UKC prompt) and send me dmesg, pcidump -xv and acpidump -o output? Please send things directly o me as the list will strip off any attachments.
Re: FW: Broadcom BCM5787
Still some problems.. System is uppdated to current.. Hangs at " bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2 (0xb002)" Anybody have any ideas ? otherwise I will have to send the machine back.. " >> OpenBSD/i386 BOOT 3.02... boot> booting hd0a:/bsd: 24491124+1053776 [52+344688+327471]=0x1900c0c entry point at 0x200120 [ using 672584 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.6-current (GENERIC) #0: Tue Oct 6 21:55:29 CEST 2009 dr...@probec.islan.lab:/opt/flash/flashboot/obj/GENERIC cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX ,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR real mem = 519663616 (495MB) avail mem = 477478912 (455MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/27/08, BIOS32 rev. 0 @ 0xfb5c0, SMBIOS rev. 2.3 @ 0xf0800 (33 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/27/2008 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 3.0 @ 0xf/0xdc04 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfda50/416 (24 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 25 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 5 7 10 11 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc/0xf200 0xd/0x8000! cpu0 at mainbus0: (uniprocessor) cpu0: RNG AES AES-CTR SHA1 SHA256 RSA cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 viaagp0 at pchb0: v3 agp0 at viaagp0: aperture at 0xd000, size 0x1000 pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pciide0 at pci0 dev 15 function 0 vendor "VIA", unknown product 0x5287 rev 0x07: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 ignored (not responding; disabled or no drives?) wd0 at pciide0 channel 1 drive 0: wd0: 1-sector PIO, LBA, 1918MB, 3928176 sectors uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x91: irq 11 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x91: irq 7 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x91: irq 10 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x91: irq 5 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 7 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL3 SO-DIMM pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00 ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00 pci2 at ppb1 bus 128 bridge io address conflict 0xc000/0x1000 bridge mem address conflict 0xcfb0/0x10 bridge mem address conflict 0xcfe0/0x10 bridge io address conflict 0xb000/0x1000 bridge mem address conflict 0xcfd0/0x10 bridge mem address conflict 0xcfc0/0x10 ppb2 at pci2 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00: irq 5 pci3 at ppb2 bus 129 bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2 (0xb002) Hangs here.. " Mvh Daniel Rapp Incabus Systems AB Vdxel: + 46 8 556 964 60 http://www.incabus.com -Original Message- From: owner-t...@openbsd.org [mailto:owner-t...@openbsd.org] On Behalf Of Mark Kettenis Sent: den 5 oktober 2009 14:21 To: Daniel Rapp Cc: tech@openbsd.org Subject: Re: FW: Broadcom BCM5787 > Date: Mon, 5 Oct 2009 14:03:08 +0200 > From: "Daniel Rapp" > > Hi, Here are the dmesg and pcidump -v > > I have asked the developers and they are positive ther is two gigabit > network ports with BCM5787 chipset on there, there are also two 10/100 > ports with the BCM4401 and those are found.. ... > pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00 > pchb7 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00 Ah, a VIA VT8251 chipset. This should be fixed in -current.
Re: FW: Broadcom BCM5787
On 2009/10/05 14:03, Daniel Rapp wrote: > Hi, Here are the dmesg and pcidump -v > > I have asked the developers and they are positive ther is two gigabit > network ports with BCM5787 chipset on there, there are also two 10/100 > ports with the BCM4401 and those are found.. > pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00 you need sys/arch/i386/pci/pchb.c r1.78 - you can either run a snapshot or backport it yourself.
Re: FW: Broadcom BCM5787
> Date: Mon, 5 Oct 2009 14:03:08 +0200 > From: "Daniel Rapp" > > Hi, Here are the dmesg and pcidump -v > > I have asked the developers and they are positive ther is two gigabit > network ports with BCM5787 chipset on there, there are also two 10/100 > ports with the BCM4401 and those are found.. ... > pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00 > pchb7 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00 Ah, a VIA VT8251 chipset. This should be fixed in -current.
FW: Broadcom BCM5787
Hi, Here are the dmesg and pcidump -v I have asked the developers and they are positive ther is two gigabit network ports with BCM5787 chipset on there, there are also two 10/100 ports with the BCM4401 and those are found.. " Phoenix Technologies, LTD System Configurations +=== ===+ | CPU Type : VIA C7 Base Memory :640K | | CPU ID/ucode ID : 06D0Extended Memory : 506880K | | CPU Clock : 1.00GHz Cache Memory : 128K | |--- ---| | Diskette Drive A : NoneDisplay Type : Auto | | Diskette Drive B : NoneSerial Port(s): 3F8 2F8 | | Pri. Master Disk : NoneParallel Port(s) : None | | Pri. Slave Disk : NoneDDR2 SDRAM at Rank : 0 | | Sec. Master Disk : LBA,ATA 33, 4110MB | | Sec. Slave Disk : None | +=== ===+ PCI device listing ... Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ 0 15 0 1106 5287 0101 IDE Cntrlr 14 0 16 0 1106 3038 0C03 USB 1.0/1.1 UHCI Cntrlr 11 0 16 1 1106 3038 0C03 USB 1.0/1.1 UHCI Cntrlr 7 0 16 2 1106 3038 0C03 USB 1.0/1.1 UHCI Cntrlr 10 0 16 3 1106 3038 0C03 USB 1.0/1.1 UHCI Cntrlr 5 >> OpenBSD/i386 BOOT 3.02... boot> booting hd0a:/bsd: 6039964+1059784 [52+336688+318896]=0x7657ec entry point at 0x200120 [ using 656008 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACP I,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR real mem = 519663616 (495MB) avail mem = 494170112 (471MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/27/08, BIOS32 rev. 0 @ 0xfb5c0, SMBIOS rev. 2.3 @ 0xf0800 (33 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/27/2008 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 3.0 @ 0xf/0xdc04 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfda50/416 (24 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 25 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 5 7 10 11 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc/0xf200 0xd/0x8000! cpu0 at mainbus0: (uniprocessor) cpu0: RNG AES AES-CTR SHA1 SHA256 RSA cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1333 MHz (1004 mV): speeds: 1333, 1067 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 viaagp0 at pchb0: v3 agp0 at viaagp0: aperture at 0xd000, size 0x1000 pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pciide0 at pci0 dev 15 function 0 vendor "VIA", unknown product 0x5287 rev 0x07: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 ignored (not responding; disabled or no drives?) wd0 at pciide0 channel 1 drive 0: wd0: 4-sector PIO, LBA, 3919MB, 8027712 sectors uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x91: irq 11 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x91: irq 7 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x91: irq 10 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x91: irq 5 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 7 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 add