Re: Topband: CQWW a bust this year
It´s amazing, the probably envious stations always suspect others with their better antennas and perhaps better operation to use web sdr. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of uy0zg Sent: Dienstag, 1. Dezember 2020 14:19 To: Tom | SP5XO Cc: topband@contesting.com; Topband Subject: Re: Topband: CQWW a bust this year Hi Weeks conditions ? For the best of the ex USSR countries, this is not a problem! Very good HIGH + WEB SDR+ very kind and democratic American judges = super result is ready! http://lists.contesting.com/archives//html/3830/2020-11/msg08693.html . 73 ! --- Nick, UY0ZG http://www.topband.in.ua Tom | SP5XO ? 2020-12-01 14:21: > Compare to recent weeks conditions were marginal during CQWW. Only two > Zone > 4 stations were audible here and it took long time to work them. > Whereas a > week ago band was wide open from MI, IL to CO or even down to TX. > I worked only mults and Dx's this time. Only 13 stations from Zone 5 in > my > log. Except for VY2ZM all NA's were weak including KC1XX and W3LPL! > Hopeful things improve for next weekend and will work some more in ARRL > 160. > CU > Tom > sp5xo > > Conditions certainly didn't favor 160 over the weekend CQWW contest > here in >> Florida at least. >> >> Looking back in 2019 I worked 50 countries on 160 during CQWW, this >> year it >> was only 17, only 3 Europeans and those were very weak. I'm sure the >> lack >> of expeditions due to CV-19 played a part but on whole I think many >> guys >> in hindsight will be glad they didn't spend the money to go. >> >> Maybe things will pick up next weekend for the ARRL 160 test though >> that tends >> to be largely a USA to USA test and it is hard to hear the DX through >> the >> local mob >> >> CU guys in the pile up >> >> Dave >> NR1DX >> -- >> Dave manu...@artekmanuals.com www.ArtekManuals.com >> >> >> > _ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Beverages and VK
At my place the two beverages I am using, 160m to NW, 120m to NE are only good for decent signals. The real weak ones I can only copy with my vertical which is an elevated GP (top loaded tower) fed against a single radial at the 21m level. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of Ignacy Misztal Sent: Mittwoch, 16. September 2020 17:09 To: topband@contesting.com Subject: Topband: Beverages and VK Lately when I worked a VK on 160m, the transmit antenna antenna heard better than beverages. In other cases with the VKs, the beverages were better but not by much. I am wondering why this is the case. Beverages make a big difference to other directions. The transmit antenna is 100ft shunt-fed tower with beam on top, and 36 radials. Beverages are 500-600 ft about 7 ft up in 7 directions, all but S. Ignacy, NO9E QTH GA _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Rotator Potentiometer shunt fed twr
MOVs and shielded rotator cables are also recommended in the ARRL antenna book 20th edition and I use them for that purpose for decades. Andrees rotator cable can´t be laced to the tower as it is a three segment crank up tower. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of Jim Brown Sent: Sonntag, 23. August 2020 23:04 To: topband@contesting.com Subject: Re: Topband: Rotator Potentiometer shunt fed twr On 8/23/2020 12:39 PM, dj...@t-online.de wrote: > Bypass the rotor with thick ground lead from the rotating pipe mast to the > tower Yes. This solves other issues. use ceramic bypass capacitors on the pot contacts and MOVs or low > voltage spark gaps to ground on all lines to the rotor and controller. MOVs are a very bad idea, and I see no benefit from the caps. > Use screened rotor cable, with the screen grounded to the tower at top and > bottom. I don't see the need for this. If the rotator cable is laced to the tower (most prefer the inside of a tower leg) it will be at the same potential as the tower all the way along the height, thanks to capacitance between the cable(s) and the tower. Remember, this is RF, not DC, and the current we're talking about is antenna current, which is near a maximum at the base an minimum at the ends of the elements of the Yagi(s) that serve as top loading. 73, Jim K9YC _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Rotator Potentiometer shunt fed twr
Bypass the rotor with thick ground lead from the rotating pipe mast to the tower, use ceramic bypass capacitors on the pot contacts and MOVs or low voltage spark gaps to ground on all lines to the rotor and controller. Use screened rotor cable, with the screen grounded to the tower at top and bottom. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of Andree DL8LAS via Topband Sent: Sonntag, 23. August 2020 21:15 To: topband@contesting.com Subject: Topband: Rotator Potentiometer shunt fed twr Hey, how can I protect my rotator from HF in the shunt fed tower , so that the poti or other electric doesn't burn in the rotator? 73 Andy DL8LAS _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Ground Conductivity
I think there will be much more not discussed yet concerning ground conductivity. What do you have to offer? Peter, DJ7WW -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of Ham Hicks Sent: Mittwoch, 25. März 2020 21:37 To: topband@contesting.com Subject: Re: Topband: Ground Conductivity I think it's about time for this discussion about ground conductivity to come to a stop. Its approaching the number of "expert " opinions about C-19 avoidance. Ham KB4BR -Original Message- From: Topband [mailto:topband-bounces+ham306=bellsouth@contesting.com] On Behalf Of K4SAV Sent: Wednesday, March 25, 2020 2:49 PM To: topband@contesting.com Subject: Re: Topband: Ground Conductivity KZ1W said: "If NEC2 is wrong, so is NEC4." - I don't think so since a different ground modeling approach is available in NEC4.2. Running EZNEC Pro4 antennas both in 2 and 4.2 sometimes shows significant differences. I didn't mean to imply there was no difference between NEC2 and NEC4 for all situations. I only examined a couple of particular BOG situations where I was able to get the same answer in NEC2 as someone else got in NEC4. In those cases either both answers are correct or they are both wrong. Jerry, K4SAV On 3/25/2020 11:17 AM, Grant Saviers wrote: > "If NEC2 is wrong, so is NEC4." - I don't think so since a different > ground modeling approach is available in NEC4.2. Running EZNEC Pro4 > antennas both in 2 and 4.2 sometimes shows significant differences. > > My .02. Exactly where is ground? It sure isn't the flat smooth plane > in NEC. And where does "real" ground start considering the huge > variety of stuff going on in the first few inches from 100% air to > solid dirt? > > I used 4.2 to model the inductive loaded BOG idea and found very small > (0.2") differences in BOG height (0.2 to 2") made large differences in > pattern and gain, even reversing the pattern. Conclusion - not > practical, even though the "best" model was neat. > > Given the posts re NEC doesn't work at small above ground distances: > the N6LF data in his "lost" BOG performance article and some modeling > I did at small distances above and below ground convinced me that 4.2 > is very good at the small distances. Of course the conductor can't be > in the ground plane. The mathematics may blow up then but mother > nature is continuous. > > Then I was surprised by the difference a mild freeze made in my DC > ground field resistance (the freeze was just a few inches). The > change had to be in the earth resistance of the rod interconnections > (bare #2 & #6), not the 8 & 10ft long rods. Ice has much lower > conductivity than water so even a frost, freezing the grass, might > have a noticeable effect on a BOG. > > As the N6LF work shows and perhaps this is another example of "you get > what you pay for" - ie BOGs are small, easy, and useful, but much more > sensitive to the environment than elevated Beverages. > > Bing found this cool essentially "Engineer's Handbook for AM > Antennas". > http://crawfordbroadcasting.com/Eng_Files/AM%20Antenna%20Systems.pdf > > Included is this: > "14.2 Antenna Resistance > Periodic checks should be made of the resistance at the common point > or non-directional antenna base. The frequency of this resistance > check will vary from station to station, and will probably be > determined by the nature of the environment around the antenna. Areas > with poor ground conductivity or sites with poor or deteriorated > ground systems may see a considerable shift in base or common point > resistance with changes in the amount of water in the soil. Similar > (and sometimes more dramatic) changes can occur when the ground freezes." > > Grant KZ1W > > On 3/24/2020 19:46, Michael Tope wrote: >> Dan, >> >> Reading that QRZ.com thread you linked to and reflecting on K4SAV's >> measurements and how much they appeared to vary over a fairly short >> period of time, got me wondering about what could be responsible. I >> am fairly certain that at least part of the radial system for my 160 >> meter vertical is over the drain field of the septic system for my >> cabin. Who knows, maybe a properly timed toilet flush could make the >> difference between working a new one and coming up empty :-) >> >> Okay, the toilet aided pileup busting is a stretch, but seriously, I >> am not sure if I can think of any better explanations than septic >> discharge for why ground characteristics could change that quickly. I >> do know in some cases there can be
Re: Topband: CQ...CQ...CQ
I think most skimmers on the RBN are wide band skimmers on small antennas. As web sdr receivers they only hear the stronger signals. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of VE6WZ_Steve Sent: Mittwoch, 18. März 2020 23:43 To: Richard (Rick) Karlquist Cc: topband Subject: Re: Topband: CQ...CQ...CQ > While you are CQ'ing, do you also check your own call > on RBN to see where you are being heard? Would that > differentiate between "dead band" and "lack of activity"? Yes. I always check RBN to see if my CQ is being spotted in EU or VK or JA etc. However, a few comments about the RBN network. For 9 years I have been running my RBN skimmer node on the RBN network and have noticed that I will only decode a small fraction of what I can actually copy with my radio and ears. First of all, my main skimmer SDR radio is using a 30m loop antenna, while my real radio is using diversity RX with the 9 circle array and phased Beverages. This is not uncommon with many other skimmers on the RBN network that may use compromise, and omni-directional antennas. Often the trans-polar DX can be very weak, and just bubbling at the noise level which is simply not enough for my CW skimmer to decode together with the CQ. However, when my skimmer IS decoding and reporting EU DX to the RBN, then the band must be really open. Therefore, the reciprocal of this is equally true. Just because my CQ is not being decoded in EU is not proof that the band is closed. But on those nights when I am hitting many of the EU skimmers, then clearly things are good! I stream all RBN spots through VE7CC into my logging program, band map and onto the Flex display, but to get a EU or NA summary of whats going on, the main RBN network webpage is great. In case you haven't used the "filters function" on the RBN network page, here are some tricks that I find very handy to get a quick snapshot of whats happening. Just looking at all spots on 160m is not very helpful because with lots of activity, detail is lost. Here are some example filters: ALL EU being spotted by NA skimmers: http://www.reversebeacon.net/dxsd1/dxsd1.php?f=3896 <http://www.reversebeacon.net/dxsd1/dxsd1.php?f=3896> This one is handy when I CQ only VE DX being spotted only by EU: http://www.reversebeacon.net/dxsd1/dxsd1.php?f=81972 <http://www.reversebeacon.net/dxsd1/dxsd1.php?f=81972> OR are any VE CQs being copied in EU on 160: http://www.reversebeacon.net/dxsd1/dxsd1.php?f=14728 <http://www.reversebeacon.net/dxsd1/dxsd1.php?f=14728> (You can also show up to 100 spots to give more history .drop down window at right) Make your own .. You can make any filter you want based on: DX country (zone, continent etc) and SPOTTER (based on country, zone, continent etc.) and band. Just go to the top banner and select: DX spots > create your own filter. Also, don't forget that 160m is the band of QSB and patience is essential. Just because you don't copy a DX spot, it may take 10 min of listening before the short QSB peak might make him copiable .for 20 or 30 seconds!! Yes this aint the 20m band. QSOs often need to be quick. 73, de steve ve6wz _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: NVIS Antenna
There is nothing special, a 50 feet high dipole has at 25° elevation angle the same gain as a shortened vertical over lossy ground or with just a few radials. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of Roger Kennedy Sent: Montag, 16. März 2020 13:52 To: topband@contesting.com Subject: Topband: NVIS Antenna Well I've said it dozens of times before . . . but I have used a horizontal halfwave Dipole (at about 50ft) for working DX on 160m for the past 50 years ! (and that's at 6 different QTHs) Not only do I work all over the world, but I know my signal often compares pretty well with other Gs using good verticals . . . and I have no problem getting through the pile-ups working the various DX-peditions. How is this possible? Well in my opinion it's because DX propagation on 160m ISN'T like 80m (where it IS nearly all low angle, so you MUST have a good vertical to work DX effectively) Based on the hundreds of comparison QSOs I've had over the decades, I figure that on 160m, propagation MUST be fairly high angle a lot of the time, presumably because of inter-layer reflections or ducting. Most of the "experts" who have written books about Low-band DX-ing have made the assumption that 160m is just like 80m . . . which in my experience it clearly isn't ! The only other factor I DO think is that if you have a low dipole on 160m but DON'T have any radials or anything underneath it, it probably radiates more low angle than computer-modelling software would suggest. I believe the errors occur on 160m because it can't properly forecast the effect of the REAL WORLD ground when the antenna is a fraction of a wavelength above it. Roger G3YRO _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Phasing lines
LCF 4-50 is relatively cheap here, I pay 2.80 Euro per meter for LDF4-50 and 4,84 Euro/m for LCF78-50. It can be buried and is resistant again mice and bird bites, no chance to be drown and it is very well shielded. I use no other cable since 1978 except in the shack. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of Jim Brown Sent: Dienstag, 3. März 2020 17:10 To: topband@contesting.com Subject: Re: Topband: Phasing lines On 3/3/2020 7:30 AM, cl...@gm3poi.com wrote: > Hi all, > > I wonder whether anyone has used LDF4-50A for phasing lines and verified the > VF as being 88%. If not have you an idea of any spread on the VF. This is a huge waste of money if your only concern is loss, which for any coax is quite low on 160M. _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Phasing lines
I have used LDF4-50 and LDF 4-75 by RFS for phasing lines on HF bands. They did as expected with 88%, however on VHF/UHF I would measure how they behave. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of cl...@gm3poi.com Sent: Dienstag, 3. März 2020 16:30 To: topband@contesting.com Subject: Topband: Phasing lines Hi all, I wonder whether anyone has used LDF4-50A for phasing lines and verified the VF as being 88%. If not have you an idea of any spread on the VF. I want to use some where it could make the difference to cable length. However nothing will be assumed it will be measured. I note from the spec that they give a tolerance of 5% but I doubt some how that the VF varies that much. 73 Clive GM3POI _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: T Top Verticals and yagis
If a 40m yagi points towards an 80m or 160m dipole in its neighbourhood the yagi pattern will be ruined as well. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of donov...@starpower.net Sent: Freitag, 28. Februar 2020 23:08 To: topband@contesting.com Subject: Re: Topband: T Top Verticals and yagis Hi Paul, A little modelling will answer the question more completely and accurately than I can answer it in writing. I was referring to the case where a 40 meter Yagi is on one tower and a T-vertical with a top length of 60-75 feet is suspended between the tower and a fairly nearby second tower. Lets say -- for the purpose of discussion -- that the two towers are in a north-south line. If you point the 40M Yagi East or West (perhaps +/- 45 degrees), the top of the T-vertical will be either below the Yagi or off to its side. If its less than 70 feet below the Yagi, the T-top will significantly degrade the performance of the 40M Yagi. Its is off to the side of the Yagi with a separation of at least 35 feet or so, degradation of the Yagi will be minimal. Detailed evaluation is best done by modelling, its very easy to do. 73 Frank W3LPL - Original Message - From: "Paul Christensen" To: topband@contesting.com Sent: Friday, February 28, 2020 8:36:56 PM Subject: Re: Topband: T Top Verticals and yagis Frank, Perhaps you can clarify what you mean by "parallel." Are you referring to the T top in parallel and *in front* of the 40m Yagi? Or, do you mean in parallel with the Yagi but off to the side by 90 degrees as in the case of a T strung between two towers, with the 40m Yagi atop one of the towers? In both cases, the T is in parallel with the Yagi. A picture would speak a thousand words here, but asking the question in words is the best I can do! Paul, W9AC -Original Message- From: Topband On Behalf Of donov...@starpower.net Sent: Friday, February 28, 2020 3:00 PM To: topband@contesting.com Subject: Re: Topband: T Top Verticals and yagis Hi Paul, If you model -- or build -- a 40 meter Yagi with a nearby T-top vertical with a 60-75 foot top, you'll discover that when the 40 meter Yagi is turned so that its elements are parallel -- or near parallel -- to a nearby T-top the impact on the performance of the 40 meter Yagi is severe. Been there. Done that... 73 Frank W3LPL - Original Message - From: "Paul Christensen" To: topband@contesting.com Sent: Friday, February 28, 2020 12:45:19 PM Subject: Re: Topband: T Top Verticals and yagis I would hate to give up the efficiency of an over-resonated T, even if field strength isn't significantly better than an L design. I think two design issues help to avoid pattern distortion to nearby HF Yagis. First, as Frank suggested, keep the length of the horizontal T wire non-resonant on any given band, including non-harmonically related bands like 30m. It's not necessary to select a T top wire length that results in resonance at the base feed, at least with a single omni antenna. Secondly, there's a difference in interaction between a T that's installed broadside to a Yagi versus one that's installed perpendicular off the end of a Yagi. For example, If a T is installed between two towers that are spaced 150 ft apart and a 40m Yagi is atop one of the towers, the T top wire is never broadside to the Yagi. It's looking straight down a piece of wire. It's no different than a Yagi director that's rotated 90 degrees to the driven and reflector elements. In fact, an existing Yagi design file could be modeled that way only with a rotational change to the director's Cartesian coordinates and a change in distance from the DE. No doubt modeling will still show some interaction but what remains should be cured with an optimum, non-resonant director length. Paul, W9AC -Original Message- From: Topband On Behalf Of Guy Olinger K2AV Sent: Friday, February 28, 2020 12:16 PM To: W7RH Cc: topband@contesting.com Subject: Re: Topband: T Top Verticals and yagis That's an awful lot of effort just to keep a T top. There are a number of effective alternatives to the traditional T top without the interaction drawbacks. Inverted L is only the dirt simple one without the skip-zone-making high angle hole in the pattern. 73, Guy K2AV On Fri, Feb 28, 2020 at 9:46 AM W7RH wrote: > The discussion has involved horizontally polarized Yagis. Perhaps use > a vertical 8 circle array on 40m! LOL And keep your T-Top! > > Bob, W7RH > > -- > W7RH DM35qj > > "It has become appallingly obvious that our technology has exceeded > our humanity." - Albert Einstein > > _ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector
Re: Topband: AA0RS result CQ160 SSB
https://www.3830scores.com/showrumor.php?arg=9EaHzxmiiygg1 -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of uy0zg Sent: Mittwoch, 26. Februar 2020 20:47 To: Topband Subject: Topband: AA0RS result CQ160 SSB Hi Unique result : Total: QSOs = 530 State/Prov = 7 Countries = 16 Total Score = 87,969 http://lists.contesting.com/archives//html/3830/2020-02/msg05978.html 530 QSOs. and all state / prov = 7 Is it possible ? Jewelry work ? -- Nick, UY0ZG http://www.topband.in.ua _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: T-loaded vertical
Hi Frank, I just simulated a T vertical 50m away from my 38m high 3L 40m yagi with EZNEC. Pattern and gain did not change on the yagi when it beamed 90° away from the yagi. Only when I turned the yagi to point to the T antenna gain went down by 0.4dB and front to back by 9dB (was 39). Director parallel to the top load. Vertical simulated with 30m vertical and 2x 15m horizontal toploads. No difference with the vertical connected to ground or lifted by 10cm. 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of donov...@starpower.net Sent: Dienstag, 18. Februar 2020 19:01 To: topband reflector Subject: Re: Topband: T-loaded vertical Hi Pete, Symmetrical T-verticals offer a performance improvement over inverted-L verticals but with a major downside if you operate on the higher bands. If the flat top of the T-vertical is near resonance on any HF band is will significantly degrade the performance of any Yagi antenna within hundreds of feet of the flat top. My recommendation: if you're serious about the HF bands don't use a T-vertical unless you can locate it far from your Yagis. I learned this lesson the hard way years ago with a 70 foot flat top on my T-vertical I totally trashed my 3 element 40 meter Yagis hundreds of feet away. 73 Frank W3LPL - Original Message - From: "N4ZR" To: "topband reflector" Sent: Tuesday, February 18, 2020 4:45:27 PM Subject: Topband: T-loaded vertical I keep seeing references to people using symmetrical wire top loading instead of the single wire of an inverted L. My question is how to calculate the appropriate length for the two top-loading wires. -- 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX cluster. _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: New Modes, Systems, etc
Those are exactly those deaf sdrs I mentioned, just useless. But tell me how exactly will you know who is using them? 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of uy0zg Sent: Samstag, 11. Januar 2020 22:49 To: peter.voel...@t-online.de Cc: topband@contesting.com Subject: Re: Topband: New Modes, Systems, etc This link can be found on the Internet : https://sdr.hu/ --- Nick, UY0ZG http://www.topband.in.ua dj...@t-online.de ? 2020-01-11 23:39: > Of course I understand the topic. > Web sdrs have the worse receiving capabilities. > I see no reason at all to use one. > > But you did not answer my question concerning the sdrs. > Please do, if possible with the links to them. > > 73 > Peter > > -Original Message- > From: uy0zg [mailto:uy...@mksat.net] > Sent: Samstag, 11. Januar 2020 22:15 > To: peter.voel...@t-online.de > Cc: topband@contesting.com > Subject: Re: Topband: New Modes, Systems, etc > > > You Peter did not understand the topic. > > Participants ( contests on 160 ?) from Eastern Europe use receivers in > the USA, Japan and Australia. > > They feel completely unpunished. > > > This is the main problem! > > --- > Nick, UY0ZG > http://www.topband.in.ua > > dj...@t-online.de ? 2020-01-11 22:05: >> If my 160m receive would be as bad as with any web sdr I would not >> contest >> on that band. >> Which web sdr is used from Eastern Europe? >> >> 73 >> Peter >> >> -Original Message- >> From: Topband >> [mailto:topband-bounces+dj7ww=t-online...@contesting.com] >> On >> Behalf Of uy0zg >> >> Serious problems for topband are the use of WEB.SDR. Especially in >> Eastern Europe. The goal of such scammers is the highest places in >> popular contests at 160 meters. >> This problem is N1. _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: New Modes, Systems, etc
Of course I understand the topic. Web sdrs have the worse receiving capabilities. I see no reason at all to use one. But you did not answer my question concerning the sdrs. Please do, if possible with the links to them. 73 Peter -Original Message- From: uy0zg [mailto:uy...@mksat.net] Sent: Samstag, 11. Januar 2020 22:15 To: peter.voel...@t-online.de Cc: topband@contesting.com Subject: Re: Topband: New Modes, Systems, etc You Peter did not understand the topic. Participants ( contests on 160 ?) from Eastern Europe use receivers in the USA, Japan and Australia. They feel completely unpunished. This is the main problem! --- Nick, UY0ZG http://www.topband.in.ua dj...@t-online.de ? 2020-01-11 22:05: > If my 160m receive would be as bad as with any web sdr I would not > contest > on that band. > Which web sdr is used from Eastern Europe? > > 73 > Peter > > -Original Message- > From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] > On > Behalf Of uy0zg > > Serious problems for topband are the use of WEB.SDR. Especially in > Eastern Europe. The goal of such scammers is the highest places in > popular contests at 160 meters. > This problem is N1. _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: New Modes, Systems, etc
If my 160m receive would be as bad as with any web sdr I would not contest on that band. Which web sdr is used from Eastern Europe? 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of uy0zg Serious problems for topband are the use of WEB.SDR. Especially in Eastern Europe. The goal of such scammers is the highest places in popular contests at 160 meters. This problem is N1. _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: FT-8 Contest would be great for Topband.
1) you need a modern(relatively new)station 6) you like to be bored by doing ham radio 73 Peter -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of DXer Sent: Samstag, 11. Januar 2020 00:12 To: topband@contesting.com Subject: Topband: FT-8 Contest would be great for Topband. The FT8 comet is back: 1) It's still legal; 2) It's still not mandatory to use it; 3) It only 'wastes' up to 3kHz on each band; 4) Lots of people are having fun with it. . _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: FT-8 Contest would be great for Topband
No wonder, imagine how many robots are active on all bands in parallel per station. -Original Message- From: Topband [mailto:topband-bounces+dj7ww=t-online...@contesting.com] On Behalf Of W0MU Mike Fatchett 1.5 million hits for FT8? WOW! _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector