Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-29 Thread Wills Wang 



On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote:

On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote:

On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:

On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:

On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:

In order to support boards with ath79 from different vendors and
thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
and SYS_SOC in the board-level Kconfig. Move these two variables
into board-level Kconfig for both ap121 and ap143 boards.

Signed-off-by: Marek Vasut 
Cc: Daniel Schwierzeck 
Cc: Wills Wang 
---

arch/mips/mach-ath79/Kconfig | 6 --
board/ath79/ap121/Kconfig| 6 ++
board/ath79/ap143/Kconfig| 6 ++
3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/mips/mach-ath79/Kconfig
b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -1,12 +1,6 @@

menu "QCA/Athroes 7xxx/9xxx platforms"

	depends on ARCH_ATH79


-config SYS_VENDOR
-   default "ath79"
-
-config SYS_SOC
-   default "ath79"
-

config SOC_AR933X

	bool

select SUPPORTS_BIG_ENDIAN

diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
index ec72914..a4e5690 100644
--- a/board/ath79/ap121/Kconfig
+++ b/board/ath79/ap121/Kconfig
@@ -1,5 +1,11 @@

if BOARD_AP121

+config SYS_VENDOR
+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+

config SYS_BOARD

	default "ap121"


diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
index 118b9b5..2e54fa7 100644
--- a/board/ath79/ap143/Kconfig
+++ b/board/ath79/ap143/Kconfig
@@ -1,5 +1,11 @@

if BOARD_AP143

+config SYS_VENDOR
+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+

config SYS_BOARD

	default "ap143"

I plan to place ap121 and ap143 into board/qca, and then
move these into board directory.

That's fine, but keep this patch or something along those lines, since
I want to create board/arduino/yun/ soon after your stuff is accepted.

btw. I got both EHCI and ethernet operational, but I am still struggling
with booting the board from the SPI NOR. I think there's something broken
in start.S or lowlevel_init.S . Which board do you use for your
development and testing ?

My private board was made by myself, it originate from AP121, and
it's circuit is compatible with AP121.

How do you program your board ? Do you have EJTAG?

What SPI NOR do you use?

My flash chip is W25Q64FV.
I place a chip socket on board, flash chip can be plugged in or out easily.

--
Best Regards
Wills

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-29 Thread Marek Vasut 
On Friday, January 29, 2016 at 09:46:24 AM, Wills Wang wrote:
> On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote:
> > On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote:
> >> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
> >>> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
>  On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
> > In order to support boards with ath79 from different vendors and
> > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
> > and SYS_SOC in the board-level Kconfig. Move these two variables
> > into board-level Kconfig for both ap121 and ap143 boards.
> > 
> > Signed-off-by: Marek Vasut 
> > Cc: Daniel Schwierzeck 
> > Cc: Wills Wang 
> > ---
> > 
> > arch/mips/mach-ath79/Kconfig | 6 --
> > board/ath79/ap121/Kconfig| 6 ++
> > board/ath79/ap143/Kconfig| 6 ++
> > 3 files changed, 12 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/mips/mach-ath79/Kconfig
> > b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644
> > --- a/arch/mips/mach-ath79/Kconfig
> > +++ b/arch/mips/mach-ath79/Kconfig
> > @@ -1,12 +1,6 @@
> > 
> > menu "QCA/Athroes 7xxx/9xxx platforms"
> > 
> > depends on ARCH_ATH79
> > 
> > -config SYS_VENDOR
> > -   default "ath79"
> > -
> > -config SYS_SOC
> > -   default "ath79"
> > -
> > 
> > config SOC_AR933X
> > 
> > bool
> > select SUPPORTS_BIG_ENDIAN
> > 
> > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
> > index ec72914..a4e5690 100644
> > --- a/board/ath79/ap121/Kconfig
> > +++ b/board/ath79/ap121/Kconfig
> > @@ -1,5 +1,11 @@
> > 
> > if BOARD_AP121
> > 
> > +config SYS_VENDOR
> > +   default "ath79"
> > +
> > +config SYS_SOC
> > +   default "ath79"
> > +
> > 
> > config SYS_BOARD
> > 
> > default "ap121"
> > 
> > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
> > index 118b9b5..2e54fa7 100644
> > --- a/board/ath79/ap143/Kconfig
> > +++ b/board/ath79/ap143/Kconfig
> > @@ -1,5 +1,11 @@
> > 
> > if BOARD_AP143
> > 
> > +config SYS_VENDOR
> > +   default "ath79"
> > +
> > +config SYS_SOC
> > +   default "ath79"
> > +
> > 
> > config SYS_BOARD
> > 
> > default "ap143"
>  
>  I plan to place ap121 and ap143 into board/qca, and then
>  move these into board directory.
> >>> 
> >>> That's fine, but keep this patch or something along those lines, since
> >>> I want to create board/arduino/yun/ soon after your stuff is accepted.
> >>> 
> >>> btw. I got both EHCI and ethernet operational, but I am still
> >>> struggling with booting the board from the SPI NOR. I think there's
> >>> something broken in start.S or lowlevel_init.S . Which board do you
> >>> use for your development and testing ?
> >> 
> >> My private board was made by myself, it originate from AP121, and
> >> it's circuit is compatible with AP121.
> > 
> > How do you program your board ? Do you have EJTAG?
> > 
> > What SPI NOR do you use?
> 
> My flash chip is W25Q64FV.
> I place a chip socket on board, flash chip can be plugged in or out easily.

I see, OK.

Just out of sheer curiosity, are you doing the ath79 support as a hobby thing
or are you putting out an actual product ?

Also, you might want to join the u-boot IRC, it's easier to discuss things in
real time.

Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-28 Thread Wills Wang 



On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:

In order to support boards with ath79 from different vendors and
thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
and SYS_SOC in the board-level Kconfig. Move these two variables
into board-level Kconfig for both ap121 and ap143 boards.

Signed-off-by: Marek Vasut 
Cc: Daniel Schwierzeck 
Cc: Wills Wang 
---
  arch/mips/mach-ath79/Kconfig | 6 --
  board/ath79/ap121/Kconfig| 6 ++
  board/ath79/ap143/Kconfig| 6 ++
  3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index 95f7de9..8f07a77 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -1,12 +1,6 @@
  menu "QCA/Athroes 7xxx/9xxx platforms"
depends on ARCH_ATH79
  
-config SYS_VENDOR

-   default "ath79"
-
-config SYS_SOC
-   default "ath79"
-
  config SOC_AR933X
bool
select SUPPORTS_BIG_ENDIAN
diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
index ec72914..a4e5690 100644
--- a/board/ath79/ap121/Kconfig
+++ b/board/ath79/ap121/Kconfig
@@ -1,5 +1,11 @@
  if BOARD_AP121
  
+config SYS_VENDOR

+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+
  config SYS_BOARD
default "ap121"
  
diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig

index 118b9b5..2e54fa7 100644
--- a/board/ath79/ap143/Kconfig
+++ b/board/ath79/ap143/Kconfig
@@ -1,5 +1,11 @@
  if BOARD_AP143
  
+config SYS_VENDOR

+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+
  config SYS_BOARD
default "ap143"
  

I plan to place ap121 and ap143 into board/qca, and then
move these into board directory.

--
Best Regards
Wills

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-28 Thread Wills Wang 



On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:

On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:

On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:

In order to support boards with ath79 from different vendors and
thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
and SYS_SOC in the board-level Kconfig. Move these two variables
into board-level Kconfig for both ap121 and ap143 boards.

Signed-off-by: Marek Vasut 
Cc: Daniel Schwierzeck 
Cc: Wills Wang 
---

   arch/mips/mach-ath79/Kconfig | 6 --
   board/ath79/ap121/Kconfig| 6 ++
   board/ath79/ap143/Kconfig| 6 ++
   3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index 95f7de9..8f07a77 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -1,12 +1,6 @@

   menu "QCA/Athroes 7xxx/9xxx platforms"
   
   	depends on ARCH_ATH79


-config SYS_VENDOR
-   default "ath79"
-
-config SYS_SOC
-   default "ath79"
-

   config SOC_AR933X
   
   	bool

select SUPPORTS_BIG_ENDIAN

diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
index ec72914..a4e5690 100644
--- a/board/ath79/ap121/Kconfig
+++ b/board/ath79/ap121/Kconfig
@@ -1,5 +1,11 @@

   if BOARD_AP121

+config SYS_VENDOR
+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+

   config SYS_BOARD
   
   	default "ap121"


diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
index 118b9b5..2e54fa7 100644
--- a/board/ath79/ap143/Kconfig
+++ b/board/ath79/ap143/Kconfig
@@ -1,5 +1,11 @@

   if BOARD_AP143

+config SYS_VENDOR
+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+

   config SYS_BOARD
   
   	default "ap143"

I plan to place ap121 and ap143 into board/qca, and then
move these into board directory.

That's fine, but keep this patch or something along those lines, since
I want to create board/arduino/yun/ soon after your stuff is accepted.

btw. I got both EHCI and ethernet operational, but I am still struggling
with booting the board from the SPI NOR. I think there's something broken
in start.S or lowlevel_init.S . Which board do you use for your development
and testing ?

My private board was made by myself, it originate from AP121, and
it's circuit is compatible with AP121.

--
Best Regards
Wills

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-28 Thread Wills Wang 



On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:

In order to support boards with ath79 from different vendors and
thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
and SYS_SOC in the board-level Kconfig. Move these two variables
into board-level Kconfig for both ap121 and ap143 boards.

Signed-off-by: Marek Vasut 
Cc: Daniel Schwierzeck 
Cc: Wills Wang 
---
  arch/mips/mach-ath79/Kconfig | 6 --
  board/ath79/ap121/Kconfig| 6 ++
  board/ath79/ap143/Kconfig| 6 ++
  3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index 95f7de9..8f07a77 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -1,12 +1,6 @@
  menu "QCA/Athroes 7xxx/9xxx platforms"
depends on ARCH_ATH79
  
-config SYS_VENDOR

-   default "ath79"
-
-config SYS_SOC
-   default "ath79"
-
  config SOC_AR933X
bool
select SUPPORTS_BIG_ENDIAN
diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
index ec72914..a4e5690 100644
--- a/board/ath79/ap121/Kconfig
+++ b/board/ath79/ap121/Kconfig
@@ -1,5 +1,11 @@
  if BOARD_AP121
  
+config SYS_VENDOR

+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+
  config SYS_BOARD
default "ap121"
  
diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig

index 118b9b5..2e54fa7 100644
--- a/board/ath79/ap143/Kconfig
+++ b/board/ath79/ap143/Kconfig
@@ -1,5 +1,11 @@
  if BOARD_AP143
  
+config SYS_VENDOR

+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+
  config SYS_BOARD
default "ap143"
  

I plan to place ap121 and ap143 into board/qca, and then
move these into board directory.

--
Best Regards
Wills

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-28 Thread Marek Vasut 
On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
> > In order to support boards with ath79 from different vendors and
> > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
> > and SYS_SOC in the board-level Kconfig. Move these two variables
> > into board-level Kconfig for both ap121 and ap143 boards.
> > 
> > Signed-off-by: Marek Vasut 
> > Cc: Daniel Schwierzeck 
> > Cc: Wills Wang 
> > ---
> > 
> >   arch/mips/mach-ath79/Kconfig | 6 --
> >   board/ath79/ap121/Kconfig| 6 ++
> >   board/ath79/ap143/Kconfig| 6 ++
> >   3 files changed, 12 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
> > index 95f7de9..8f07a77 100644
> > --- a/arch/mips/mach-ath79/Kconfig
> > +++ b/arch/mips/mach-ath79/Kconfig
> > @@ -1,12 +1,6 @@
> > 
> >   menu "QCA/Athroes 7xxx/9xxx platforms"
> >   
> > depends on ARCH_ATH79
> > 
> > -config SYS_VENDOR
> > -   default "ath79"
> > -
> > -config SYS_SOC
> > -   default "ath79"
> > -
> > 
> >   config SOC_AR933X
> >   
> > bool
> > select SUPPORTS_BIG_ENDIAN
> > 
> > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
> > index ec72914..a4e5690 100644
> > --- a/board/ath79/ap121/Kconfig
> > +++ b/board/ath79/ap121/Kconfig
> > @@ -1,5 +1,11 @@
> > 
> >   if BOARD_AP121
> > 
> > +config SYS_VENDOR
> > +   default "ath79"
> > +
> > +config SYS_SOC
> > +   default "ath79"
> > +
> > 
> >   config SYS_BOARD
> >   
> > default "ap121"
> > 
> > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
> > index 118b9b5..2e54fa7 100644
> > --- a/board/ath79/ap143/Kconfig
> > +++ b/board/ath79/ap143/Kconfig
> > @@ -1,5 +1,11 @@
> > 
> >   if BOARD_AP143
> > 
> > +config SYS_VENDOR
> > +   default "ath79"
> > +
> > +config SYS_SOC
> > +   default "ath79"
> > +
> > 
> >   config SYS_BOARD
> >   
> > default "ap143"
> 
> I plan to place ap121 and ap143 into board/qca, and then
> move these into board directory.

That's fine, but keep this patch or something along those lines, since
I want to create board/arduino/yun/ soon after your stuff is accepted.

btw. I got both EHCI and ethernet operational, but I am still struggling
with booting the board from the SPI NOR. I think there's something broken
in start.S or lowlevel_init.S . Which board do you use for your development
and testing ?
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-28 Thread Marek Vasut 
On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote:
> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
> > On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
> >> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
> >>> In order to support boards with ath79 from different vendors and
> >>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
> >>> and SYS_SOC in the board-level Kconfig. Move these two variables
> >>> into board-level Kconfig for both ap121 and ap143 boards.
> >>> 
> >>> Signed-off-by: Marek Vasut 
> >>> Cc: Daniel Schwierzeck 
> >>> Cc: Wills Wang 
> >>> ---
> >>> 
> >>>arch/mips/mach-ath79/Kconfig | 6 --
> >>>board/ath79/ap121/Kconfig| 6 ++
> >>>board/ath79/ap143/Kconfig| 6 ++
> >>>3 files changed, 12 insertions(+), 6 deletions(-)
> >>> 
> >>> diff --git a/arch/mips/mach-ath79/Kconfig
> >>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644
> >>> --- a/arch/mips/mach-ath79/Kconfig
> >>> +++ b/arch/mips/mach-ath79/Kconfig
> >>> @@ -1,12 +1,6 @@
> >>> 
> >>>menu "QCA/Athroes 7xxx/9xxx platforms"
> >>>
> >>>   depends on ARCH_ATH79
> >>> 
> >>> -config SYS_VENDOR
> >>> - default "ath79"
> >>> -
> >>> -config SYS_SOC
> >>> - default "ath79"
> >>> -
> >>> 
> >>>config SOC_AR933X
> >>>
> >>>   bool
> >>>   select SUPPORTS_BIG_ENDIAN
> >>> 
> >>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
> >>> index ec72914..a4e5690 100644
> >>> --- a/board/ath79/ap121/Kconfig
> >>> +++ b/board/ath79/ap121/Kconfig
> >>> @@ -1,5 +1,11 @@
> >>> 
> >>>if BOARD_AP121
> >>> 
> >>> +config SYS_VENDOR
> >>> + default "ath79"
> >>> +
> >>> +config SYS_SOC
> >>> + default "ath79"
> >>> +
> >>> 
> >>>config SYS_BOARD
> >>>
> >>>   default "ap121"
> >>> 
> >>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
> >>> index 118b9b5..2e54fa7 100644
> >>> --- a/board/ath79/ap143/Kconfig
> >>> +++ b/board/ath79/ap143/Kconfig
> >>> @@ -1,5 +1,11 @@
> >>> 
> >>>if BOARD_AP143
> >>> 
> >>> +config SYS_VENDOR
> >>> + default "ath79"
> >>> +
> >>> +config SYS_SOC
> >>> + default "ath79"
> >>> +
> >>> 
> >>>config SYS_BOARD
> >>>
> >>>   default "ap143"
> >> 
> >> I plan to place ap121 and ap143 into board/qca, and then
> >> move these into board directory.
> > 
> > That's fine, but keep this patch or something along those lines, since
> > I want to create board/arduino/yun/ soon after your stuff is accepted.
> > 
> > btw. I got both EHCI and ethernet operational, but I am still struggling
> > with booting the board from the SPI NOR. I think there's something broken
> > in start.S or lowlevel_init.S . Which board do you use for your
> > development and testing ?
> 
> My private board was made by myself, it originate from AP121, and
> it's circuit is compatible with AP121.

How do you program your board ? Do you have EJTAG?

What SPI NOR do you use?
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

2016-01-27 Thread Marek Vasut 
In order to support boards with ath79 from different vendors and
thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
and SYS_SOC in the board-level Kconfig. Move these two variables
into board-level Kconfig for both ap121 and ap143 boards.

Signed-off-by: Marek Vasut 
Cc: Daniel Schwierzeck 
Cc: Wills Wang 
---
 arch/mips/mach-ath79/Kconfig | 6 --
 board/ath79/ap121/Kconfig| 6 ++
 board/ath79/ap143/Kconfig| 6 ++
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index 95f7de9..8f07a77 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -1,12 +1,6 @@
 menu "QCA/Athroes 7xxx/9xxx platforms"
depends on ARCH_ATH79
 
-config SYS_VENDOR
-   default "ath79"
-
-config SYS_SOC
-   default "ath79"
-
 config SOC_AR933X
bool
select SUPPORTS_BIG_ENDIAN
diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
index ec72914..a4e5690 100644
--- a/board/ath79/ap121/Kconfig
+++ b/board/ath79/ap121/Kconfig
@@ -1,5 +1,11 @@
 if BOARD_AP121
 
+config SYS_VENDOR
+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+
 config SYS_BOARD
default "ap121"
 
diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
index 118b9b5..2e54fa7 100644
--- a/board/ath79/ap143/Kconfig
+++ b/board/ath79/ap143/Kconfig
@@ -1,5 +1,11 @@
 if BOARD_AP143
 
+config SYS_VENDOR
+   default "ath79"
+
+config SYS_SOC
+   default "ath79"
+
 config SYS_BOARD
default "ap143"
 
-- 
2.1.4

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot