Re: HP LaserJet P1005 on/off problem
Thank you both Andre & Scott, Well, the plugin certainly fixed the print quality. Resolution and printable area. But the on/off syndrome remains with me. For the present I have to remember to make sure the P1005 in turned on before I boot up or I get the "may not be connected" error message. In Windows if I turn on the printer after sending a job, I have to go into Printer Control and refresh the print job to get it working. So it's not problem free. But for the price $95 with cartridge it prints fast and well in both systems. So I still need a solution to wake up the connection in situ - eventually. Thanks again, Dave W On Sun, 2009-05-24 at 11:04 +1000, Andre Mangan wrote: > For general information, regarding the HP 1005 and the HP P1005 - both > printers require the plugin. > > See list here: http://hplipopensource.com/hplip-web/plugin.html > > While HPLIP is open source, the plugins are proprietary and not > included in HPLIP. > > Whether or not the plugin will fix Dave's printer problem remains to > be announced. > > Andre > > > > 2009/5/24 Scott Evans > Hi Dave, > > Well CTRL+ALT+Backspace is only for restarting your X server! > (except in Jaunty requires dontzap to be installed to > re-enable) I'm not 100% familiar with the model printer that > you have, but I'm assuming its a entry level laser-jet. Do you > connect this by USB? if so, you may find that by removing the > USB cable from it for 5-10 seconds then plugging it back in > that it "may" resume as it should. although I have just > searched the Ubuntu forums and there seems to be quite a lot > of mention about this model printer and the confusion between > HP-1005 & HP-P1005. > > There is this link http://foo2xqx.rkkda.com/ but if you are > not comfortable with any of this then "DON'T" attempt this! I > normally wouldn't suggest this type of fix as it could leave > you with a broken Ubuntu, hence it is usually best for you to > stick with what's in the Ubuntu repositories as they are known > to work! (but not always!) and you have a lesser chance of > complete system failure. > > Another thing to try, to confirm that your printer is picked > up would be to start the PC without the printer attached, then > once booted & logged in, plug the printer in and in a terminal > type "lsusb" (without quotes!) and see if the printer is in > the listing (similar to below) > > Bus 001 Device 011: ID 03f0:6c11 Hewlett-Packard > Bus 001 Device 007: ID 03f0:3404 Hewlett-Packard DeskJet 6122 > > This way you will know if the printer is being detected and > would lead to an issue with either HPLIP or CUPS. > > > Scott Evans VK7HSE > Phone: +61362291658 > Mobile: +61417586157 > Skype: vk7hse > sc...@vk7hse.hobby-site.org > http://www.vk7hse.hobby-site.org > PGP/GPG Key ID 6949D271 > > > -- This email and any files transmitted with it are > confidential and intended solely for the use of the individual > or entity to whom they are addressed. If you have received > this email in error please notify the system manager. This > message contains confidential information and is intended only > for the individual named. If you are not the named addressee > you should not disseminate, distribute or copy this e-mail. > Please notify the sender immediately by e-mail if you have > received this e-mail by mistake and delete this e-mail from > your system. If you are not the intended recipient you are > notified that disclosing, copying, distributing or taking any > action in reliance on the contents of this information is > strictly prohibited. > > > -- > ubuntu-au mailing list > ubuntu-au@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-au > > -- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au
Re: HP LaserJet P1005 on/off problem
For general information, regarding the HP 1005 and the HP P1005 - both printers require the plugin. See list here: http://hplipopensource.com/hplip-web/plugin.html While HPLIP is open source, the plugins are proprietary and not included in HPLIP. Whether or not the plugin will fix Dave's printer problem remains to be announced. Andre 2009/5/24 Scott Evans > Hi Dave, > > Well CTRL+ALT+Backspace is only for restarting your X server! (except in > Jaunty requires dontzap to be installed to re-enable) I'm not 100% familiar > with the model printer that you have, but I'm assuming its a entry level > laser-jet. Do you connect this by USB? if so, you may find that by removing > the USB cable from it for 5-10 seconds then plugging it back in that it > "may" resume as it should. although I have just searched the Ubuntu forums > and there seems to be quite a lot of mention about this model printer and > the confusion between HP-1005 & HP-P1005. > > There is this link http://foo2xqx.rkkda.com/ but if you are not > comfortable with any of this then *"DON'T" *attempt this! I normally > wouldn't suggest this type of fix as it could leave you with a broken > Ubuntu, hence it is usually best for you to stick with what's in the Ubuntu > repositories as they are known to work! (but not always!) and you have a > lesser chance of complete system failure. > > Another thing to try, to confirm that your printer is picked up would be to > start the PC without the printer attached, then once booted & logged in, > plug the printer in and in a terminal type "lsusb" (without quotes!) and see > if the printer is in the listing (similar to below) > > Bus 001 Device 011: ID 03f0:6c11 Hewlett-Packard > Bus 001 Device 007: ID 03f0:3404 Hewlett-Packard DeskJet 6122 > > This way you will know if the printer is being detected and would lead to > an issue with either HPLIP or CUPS. > > *Scott Evans VK7HSE* > *Phone: +61362291658* > *Mobile: +61417586157* > *Skype: vk7hse* > *sc...@vk7hse.hobby-site.org* > *http://www.vk7hse.hobby-site.org* > *PGP/GPG Key ID 6949D271* > > -- This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom they are > addressed. If you have received this email in error please notify the system > manager. This message contains confidential information and is intended only > for the individual named. If you are not the named addressee you should not > disseminate, distribute or copy this e-mail. Please notify the sender > immediately by e-mail if you have received this e-mail by mistake and delete > this e-mail from your system. If you are not the intended recipient you are > notified that disclosing, copying, distributing or taking any action in > reliance on the contents of this information is strictly prohibited. > > -- > ubuntu-au mailing list > ubuntu-au@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-au > > <>-- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au
Re: HP LaserJet P1005 on/off problem
Hi Dave, Well CTRL+ALT+Backspace is only for restarting your X server! (except in Jaunty requires dontzap to be installed to re-enable) I'm not 100% familiar with the model printer that you have, but I'm assuming its a entry level laser-jet. Do you connect this by USB? if so, you may find that by removing the USB cable from it for 5-10 seconds then plugging it back in that it "may" resume as it should. although I have just searched the Ubuntu forums and there seems to be quite a lot of mention about this model printer and the confusion between HP-1005 & HP-P1005. There is this link http://foo2xqx.rkkda.com/ but if you are not comfortable with any of this then "DON'T" attempt this! I normally wouldn't suggest this type of fix as it could leave you with a broken Ubuntu, hence it is usually best for you to stick with what's in the Ubuntu repositories as they are known to work! (but not always!) and you have a lesser chance of complete system failure. Another thing to try, to confirm that your printer is picked up would be to start the PC without the printer attached, then once booted & logged in, plug the printer in and in a terminal type "lsusb" (without quotes!) and see if the printer is in the listing (similar to below) Bus 001 Device 011: ID 03f0:6c11 Hewlett-Packard Bus 001 Device 007: ID 03f0:3404 Hewlett-Packard DeskJet 6122 This way you will know if the printer is being detected and would lead to an issue with either HPLIP or CUPS. Scott Evans VK7HSE Phone: +61362291658 Mobile: +61417586157 Skype: vk7hse sc...@vk7hse.hobby-site.org http://www.vk7hse.hobby-site.org PGP/GPG Key ID 6949D271 -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. <>-- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au
Re: HP LaserJet P1005 on/off problem
Perhaps you need the plugin for the P1005 from this address: http://www.linuxprinting.org/download/printdriver/auxfiles/HP/plugins/ Andre 2009/5/24 The Wassermans > On Sat, 2009-05-23 at 17:55 +1000, Scott Evans wrote: > > As a guess, what version of HPLIP are you using? it may be that you > > need > > to update it to a newer version as there could be something specific > > that needs to be sent to the printer to wake it up (not sure) But I > > have > > a all in one unit here HP-4400 and this looses the plot! if not > > printed > > or used as a scanner, to resolve this, it just needs the power to be > > cycled. > > Thanks Scott, > > I believe I am using the latest HPLIP version -3.9.4b. I just Googled > "wake up printer . . ." There is a lot of chatter. Most of which I > don't really understand. But it does seem to be a common problem. Is > there, maybe, a simple command I can send via Terminal? I've tried CTRL > +ALT+Backspace that doesn't work. > > Dave W > > > -- > ubuntu-au mailing list > ubuntu-au@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-au > -- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au
Re: HP LaserJet P1005 on/off problem
On Sat, 2009-05-23 at 17:55 +1000, Scott Evans wrote: > As a guess, what version of HPLIP are you using? it may be that you > need > to update it to a newer version as there could be something specific > that needs to be sent to the printer to wake it up (not sure) But I > have > a all in one unit here HP-4400 and this looses the plot! if not > printed > or used as a scanner, to resolve this, it just needs the power to be > cycled. Thanks Scott, I believe I am using the latest HPLIP version -3.9.4b. I just Googled "wake up printer . . ." There is a lot of chatter. Most of which I don't really understand. But it does seem to be a common problem. Is there, maybe, a simple command I can send via Terminal? I've tried CTRL +ALT+Backspace that doesn't work. Dave W -- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au
Re: HP LaserJet P1005 on/off problem
As a guess, what version of HPLIP are you using? it may be that you need to update it to a newer version as there could be something specific that needs to be sent to the printer to wake it up (not sure) But I have a all in one unit here HP-4400 and this looses the plot! if not printed or used as a scanner, to resolve this, it just needs the power to be cycled. Scott Evans VK7HSE Phone: +61362291658 Mobile: +61417586157 Skype: vk7hse sc...@vk7hse.hobby-site.org http://www.vk7hse.hobby-site.org PGP/GPG Key ID 6949D271 -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. <>-- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au