Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
(I googled first but might have missed it.) Is it possible to configure more than one wifi network in wpa_supplicant.conf? Thanks and best regards, Mike mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
I am happily running piCorePlayer v6.0.0-b7 on a new RP 4. I am always amazed that such a great project exists, and I hope everyone donates. Under one setup, I did have some pops occur between flac tracks with different sample rates (e.g., 16/44.1 -> 24/96). I blame the DAC/USB combination, though without much basis. I tried upsampling everything in order to avoid sample rate changes, but I didn't find the right squeezelite settings (poor google skills I know), and kept ending up with a squeezelite that wouldn't start. Here are my results from connecting what I have in different ways. POPS = piCorePlayer into Topping D30 (USB interface) <- my initial choice :-( NO POPS =piCorePlayer into Benchmark DAC3 (USB interface) <- incongruous pair? NO POPS = miniDSP with squeezelite into Topping 30 (coax) <- trying to see if the Topping 30 was always trouble NO POPS = piCorePlayer into Topping D50s (USB interface) <- this seems like a winner! I'm just reporting my experience so folks deciding on a DAC can have another data point to use in their decision. mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > Send them an email. Not sure why they don't monitor their own forums. No much of a response. HiFiBerry team (HiFiBerry) Jun 24, 19:04 CEST Hi, unfortunately there is nothing more we can do here. The player software would need to reduce the volume at the end and increase it again when starting the new stream. I don't think squeezelite (the base player from PiCorePlayer) can do this. Best regards, Daniel mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > Anything is possible. Have you talked to the guys at hifiberry. I posted here. https://support.hifiberry.com/hc/en-us/community/posts/115002824709-loud-pops-when-changing-to-lower-bitrate- Is there a better way to contact them? mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > You are referring to https://github.com/raspberrypi/linux/issues/2016 > It was just fixed in 4.9.30 > > I don't have the board to test, but I would think you could just > upsample/downsample to a different frequency, as it appears only 48k is > affected. We are waiting for new kernel drivers for the allo product > before releasing the next version. Might this fix help the loud popping problem that happens when changing bitrate? mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
ralphy wrote: > I think you are hitting a bug when playing short tracks that was > recently discovered and hopefully fixed. > > Please try this beta build with the same 3 short tracks. You'll need to > ssh into pcp and run > > > Code: > > sudo /usr/local/etc/init.d/squeezelite stop > > cd /mnt/mmcblk0p2/tce > > wget -O squeezelite http://ralph_irving.users.sourceforge.net/pico/squeezelite-1.8.6.986-armv6hf-ffmpeg > > chmod 755 squeezelite > > sudo /usr/local/etc/init.d/squeezelite start > > > First, thanks for giving a clear and simple suggestion, good match for my skill level. Still pops. :-( The pops weren't limited to short tracks (I picked short tracks so I could test quickly and easily share). mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
sbp wrote: > Could you try to use a 0 (zero) in "close output settings" on the > squeezelite page. > > Steen Thanks for the suggestion. I just tried that and still get (loud) pops. The pops are reproducible (if I repeat the track sequence, they happen at the same place). Is there a diagnostic that would be helpful? I turned on squeezelite logging for 3 short tracks (track POP track POP track) and the log is below. Code: /usr/local/bin/squeezelite -n piCorePlayer -o hw:CARD=sndrpihifiberry -a 80:4::1: -r 192000 -R vLs::0.5:28::: -d all=info -f /var/log/pcp_squeezelite.log [09:58:06.067952] stream_init:294 init stream [09:58:06.073422] output_init_alsa:873 init output [09:58:06.073590] output_init_alsa:902 requested alsa_buffer: 80 alsa_period: 4 format: any mmap: 1 [09:58:06.074045] output_init_common:411 supported rates: 192000 176400 96000 88200 48000 44100 32000 24000 22500 16000 12000 11025 8000 [09:58:06.120703] output_init_alsa:928 memory locked [09:58:06.121767] decode_init:153 init decode [09:58:06.122004] register_dsd:625 using dsd to decode dsf,dff [09:58:06.123428] load_ff:619 dlerror: libavcodec.so.57: cannot open shared object file: No such file or directory [09:58:06.123718] load_ff:619 dlerror: libavcodec.so.57: cannot open shared object file: No such file or directory [09:58:06.125656] load_faad:611 loaded libfaad.so.2 [09:58:06.125690] register_faad:641 using faad to decode aac [09:58:06.127931] load_vorbis:301 loaded libvorbisfile.so.3 [09:58:06.127965] register_vorbis:330 using vorbis to decode ogg [09:58:06.130133] load_flac:258 loaded libFLAC.so.8 [09:58:06.130170] register_flac:286 using flac to decode flc [09:58:06.130193] register_pcm:414 using pcm to decode aif,pcm [09:58:06.131227] load_mad:384 loaded libmad.so.0 [09:58:06.131257] register_mad:413 using mad to decode mp3 [09:58:06.133370] load_soxr:269 loaded libsoxr.so.0 [09:58:06.133535] resample_init:362 resampling sync recipe: 0x46, flags: 0x00, scale: 0.94, precision: 28.0, passband_end: 0.0, stopband_begin: 0.0, phase_response: -1.0 [09:58:06.133718] discover_server:817 sending discovery [09:58:06.134369] discover_server:828 got response from: 192.168.1.14:3483 [09:58:06.134493] slimproto:916 connecting to 192.168.1.14:3483 [09:58:06.135029] slimproto:955 connected [09:58:06.135068] sendHELO:138 mac: b8:27:eb:b2:e2:69 [09:58:06.135094] sendHELO:140 cap: Model=squeezelite,AccuratePlayPoints=1,HasDigitalOut=1,HasPolarityInversion=1,Firmware=v1.8.6-957,ModelName=SqueezeLite,MaxSampleRate=192000,dsf,dff,aac,ogg,flc,aif,pcm,mp3 [09:58:06.136798] output_thread:621 open output device: hw:CARD=sndrpihifiberry [09:58:06.136851] alsa_open:338 opening device at: 44100 [09:58:06.139052] alsa_open:389 opened device hw:CARD=sndrpihifiberry using format: S32_LE sample rate: 44100 mmap: 1 [09:58:06.139204] alsa_open:468 buffer: 80 period: 4 -> buffer size: 3528 period size: 882 [09:58:45.689993] decode_flush:227 decode flush [09:58:45.690080] output_flush:424 flush output buffer [09:58:45.697314] codec_open:255 codec open: 'f' [09:58:45.697452] stream_sock:393 connecting to 192.168.1.14:9000 [09:58:45.697879] stream_sock:422 header: GET /stream.mp3?player=b8:27:eb:b2:e2:69 HTTP/1.0 Authorization: Basic c3F1ZWV6ZWJveFhYWDp4WHB4TGFnRmdO [09:58:45.714844] stream_thread:180 headers: len: 135 HTTP/1.1 200 OK Server: Logitech Media Server (7.9.0 - 0.151.20161218git1481874538) Connection: close Content-Type: audio/x-flac [09:58:45.766515] write_cb:116 setting track_start [09:58:45.766627] resample_newstream:189 resampling from 44100 -> 176400 [09:58:45.781260] process_newstream:124 processing: active [09:58:45.782913] _checkfade:282 fade mode: 2 duration: 0 track-start [09:58:45.783008] _checkfade:291 fade IN: 0 frames [09:58:46.814102] _output_frames:147 track start sample rate: 176400 replay_gain: 137556 [09:58:46.824278] output_thread:621 open output device: hw:CARD=sndrpihifiberry [09:58:46.825925] alsa_open:338 opening device at: 176400 [09:58:46.828259] alsa_open:389 opened device hw:CARD=sndrpihifiberry using format: S32_LE sample rate: 176400 mmap: 1 [09:58:46.828398] alsa_open:468 buffer: 80 period: 4 -> buffer size: 14112 period size: 3528 [09:58:46.843097] _output_frames:175 fade start reached [09:58:46.843130] _output_frames:208 fade complete [09:58:47.984015] _output_frames:70 skip 3528 of 3528 frames [09:59:14.372689] stream_thread:253 end of stream [09:59:51.731826] resample_drain:119 resample track complete - total track clips: 0 [09:59:51.734045] decode_thread:100 decode complete [09:59:51.734117] _checkfade:282 fade mode: 2 duration: 0 track-end [09:59:52.079183] codec_open:255 codec open: 'f' [09:59:52.079331] stream_sock:393 connecting to 192.168.1.14:9000 [09:59:52.079699] stream_sock:422 header: GET
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
mkt wrote: > Upsampling everything removes the pops that were occurring when going to > tracks with lower bitrate. Much improved listening experience! Random > shuffle was making me gun-shy. > Thanks for the clear instructions on how to do that. > Since you have not seen this problem with the hifiberry dac+, could > active speakers cause this? I spoke too soon. There are not as many pops, and they are not as loud, but still startling. They are less predictable with respect to bitrate, but never seem to involve 16/44 and are reproducible. mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > I've never heard of this from a Hifiberry Dac+. (This is my daily > driver dac) The post was referencing the Allo Boss Dac, there was a > driver issue, that was fixed in the final release of pCP. You can try > what ralphy mentioned in the post following the above reference > post.but I suspect this is a different issue. > > One thing you can do is to upsample everything to your highest bitrate. > > 22782 Upsampling everything removes the pops that were occurring when going to tracks with lower bitrate. Much improved listening experience! Random shuffle was making me gun-shy. Thanks for the clear instructions on how to do that. Since you have not seen this problem with the hifiberry dac+, could active speakers cause this? mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
There is a loud pop (makes me afraid for my poor speakers!) when I go from a track with a higher bitrate to one with a lower one. For instance, from 24/96 flac to 24/48 or 16/44. No pops when going from lower to higher bit rate. I'm using piccoreplayer 3.20 and the Hifiberry DAC+ setting. Any suggestions? Drivers? Settings? It's really awful. I saw a similar question here http://forums.slimdevices.com/showthread.php?107223-Announce-piCorePlayer-3-20-Beta=880311=1#post880311 but different DAC (?) and didn't see the solution. Thanks! mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora LMS RPM packages, call for testers...
mkt wrote: > Thanks so much for the squeezecommunity repos! > As a Fedora user, I don't know what I'd do without it! > I look forward to using it with Fedora 25. What should I do? I'm trying to update to Fedora 25 via dnf. I'm afraid --allowerasing will leave me without logitechmediaserver. Thanks for any help! Code: dnf system-upgrade download --releasever=25 Last metadata expiration check: 2:58:05 ago on Sat Nov 26 06:54:08 2016. Error: package logitechmediaserver-1:7.9.0-0.148.20161023git1477086729.fc24.noarch requires perl(:MODULE_COMPAT_5.22.2), but none of the providers can be installed. package logitechmediaserver-CPAN-1:7.9.0-0.22.20150426git1426673042.fc24.x86_64 requires perl(:MODULE_COMPAT_5.22.2), but none of the providers can be installed (try to add '--allowerasing' to command line to replace conflicting packages) mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=101931 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora LMS RPM packages, call for testers...
Thanks so much for the squeezecommunity repos! As a Fedora user, I don't know what I'd do without it! I look forward to using it with Fedora 25. mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=101931 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora LMS RPM packages, call for testers...
The current version (logitechmediaserver-7.9.0-0.29.20140909git1409915004.fc20.noarch) seems to have picked up a problem with New Music being empty. http://forums.slimdevices.com/showthread.php?102159-New-music-empty mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=101931 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 20 Upgrade breaks LMS 7.8.0
JackOfAll wrote: Thank you. Yes, I'm aware. F20 Perl is now version 5.18. The CS repo for F20 should be populated later today. I'll update this post when it is. Just wanted to let you know how much the CS repo is appreciated! Thanks! mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=100579 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 20 Upgrade breaks LMS 7.8.0
mherger wrote: Thanks Michael, but I only use the CS repo now. I highly recommend it. It takes the hassle out of maintaining LMS. takes the hassle out of maintaining LMS, but you started this thread because it doesn't work any more? Hmm... -- Michael Back in the old days every Fedora upgrade upgraded perl, broke the squeeze server and would take quite a long time to get addressed. Fedora does not have the user base to get its itches scratched anymore. The interwebs (and this forum) are full are elaborate recipes to handle fedora update breakage. Fixed in a day with a repo? That's great! Thanks again! mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=100579 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
JackOfAll wrote: LOGITECHMEDIASERVER-7.8.0-0.10.20130409GIT1365449102 Code: sudo yum --enablerepo=community-squeeze-testing update logitechmediaserver Castalla, can you test the update on the Cubie as well. Anyone with any issues after updating, you can always downgrade back to the, (known to be good), 7.8.0-0.8.20130315git1363340458 release. Code: sudo yum downgrade logitechmediaserver Works for me. Thanks! mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
This Code: yum -y install http://www.communitysqueeze.org/repo/community-squeeze-repo-1-1.noarch.rpm needs to be tweaked to Code: yum -y install http://www.communitysqueeze.org/repo/community-squeeze-repo-1-3.noarch.rpm mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
gharris999 wrote:
I, too, am just now trying to get lms up and running on F18. Having
installed from community-squeeze-repo-1-3.noarch.rpm, I'm getting these
errors on startup (using a debugging script):
Code:
[13-04-06 14:12:18.1046] lms-debug.sh (1974) Attempting to start:
/usr/libexec/squeezeboxserver
defined(@array) is deprecated at
/usr/share/squeezeboxserver/CPAN/Class/Inspector.pm line 124.
(Maybe you should just omit the defined()?)
defined(@array) is deprecated at
/usr/share/squeezeboxserver/CPAN/Log/Log4perl/Config.pm line 840.
(Maybe you should just omit the defined()?)
Unable to read prefs from /var/lib/squeezeboxserver/prefs/server.prefs :
Usage: YAML::XS::LibYAML::Load(yaml_sv) at
/usr/share/squeezeboxserver/CPAN/YAML/XS.pm line 48.
DBI connect('dbname=/imgproxy.db','',...) failed: unable to open database
file at /usr/lib64/perl5/vendor_perl/Slim/Utils/DbCache.pm line 208.
Delete the file /imgproxy.db and start from scratch.
Unable to read/create /imgproxy.db
Compilation failed in require at
/usr/lib64/perl5/vendor_perl/Slim/Control/Queries.pm line 47.
BEGIN failed--compilation aborted at
/usr/lib64/perl5/vendor_perl/Slim/Control/Queries.pm line 47.
Compilation failed in require at
/usr/lib64/perl5/vendor_perl/Slim/Control/Request.pm line 435.
BEGIN failed--compilation aborted at
/usr/lib64/perl5/vendor_perl/Slim/Control/Request.pm line 435.
Compilation failed in require at
/usr/lib64/perl5/vendor_perl/Slim/Player/Client.pm line 32.
Compilation failed in require at
/usr/lib64/perl5/vendor_perl/Slim/Utils/Alarm.pm line 48.
BEGIN failed--compilation aborted at
/usr/lib64/perl5/vendor_perl/Slim/Utils/Alarm.pm line 48.
Compilation failed in require at
/usr/lib64/perl5/vendor_perl/Slim/Buttons/Alarm.pm line 12.
BEGIN failed--compilation aborted at
/usr/lib64/perl5/vendor_perl/Slim/Buttons/Alarm.pm line 12.
Compilation failed in require at
/usr/lib64/perl5/vendor_perl/Slim/Buttons/Common.pm line 41.
BEGIN failed--compilation aborted at
/usr/lib64/perl5/vendor_perl/Slim/Buttons/Common.pm line 41.
Compilation failed in require at /usr/libexec/squeezeboxserver line 186.
BEGIN failed--compilation aborted at /usr/libexec/squeezeboxserver line 186.
Found SELinux - setting security context to: texrel_shlib_t for *.so files.
Got @INC containing:
/usr/libexec
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.
Extended @INC to contain:
/usr/share/squeezeboxserver/CPAN/arch/5.16/x86_64-linux-thread-multi
/usr/share/squeezeboxserver/CPAN/arch/5.16/x86_64-linux-thread-multi/auto
/usr/share/squeezeboxserver/CPAN/arch/5.16.2/x86_64-linux-thread-multi
/usr/share/squeezeboxserver/CPAN/arch/5.16.2/x86_64-linux-thread-multi/auto
/usr/share/squeezeboxserver/CPAN/arch/5.16/x86_64-linux-thread-multi
/usr/share/squeezeboxserver/CPAN/arch/5.16/x86_64-linux-thread-multi/auto
/usr/share/squeezeboxserver/CPAN/arch/x86_64-linux-thread-multi
/usr/share/squeezeboxserver/lib
/usr/share/squeezeboxserver/CPAN
/usr/share/squeezeboxserver
/usr/libexec
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.
Loaded module: [version] ok!
Loaded module: [Time::HiRes] ok!
Loaded module: [DBI] ok!
Loaded module: [EV] ok!
Loaded module: [XML::Parser::Expat] ok!
Loaded module: [HTML::Parser] ok!
Loaded module: [JSON::XS] ok!
Loaded module: [Digest::SHA1] ok!
Loaded module: [YAML::XS] ok!
Loaded module: [Sub::Name] ok!
The following modules are loaded after the first attempt:
re.pm = /usr/lib64/perl5/re.pm
[...]
feature.pm = /usr/share/perl5/feature.pm
The following modules are loaded after the second attempt:
re.pm = /usr/lib64/perl5/re.pm
[...]
feature.pm = /usr/share/perl5/feature.pm
[13-04-06 14:12:18.8629] lms-debug.sh (1974) /usr/libexec/squeezeboxserver
exited, code 2.
Just an idea, I had some errors like that before I uninstalled the
logitech version, disabled the logitech repository and really installed
from the community-squeeze repository.
mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921
View this thread: http://forums.slimdevices.com/showthread.php?t=97862
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
JackOfAll wrote: Aside from the firewall issues, every single instance where people have had problems so far, has been the result of having the logitech rpm installed and not following the instructions to remove it before installing the CS rpm. mkt and gharris999, before I start chasing rainbows again, can you confirm that if you had the logitech rpm installed, you removed it before installing the CS rpm? I think that I removed the logitech rpm and disabled the repository. The files that give the error messages seem to belong the the appropriate rpm. rpm -q --file /usr/share/squeezeboxserver/CPAN/Class/Inspector.pm logitechmediaserver-7.8.0-0.9.20130404git1365073464.fc18.noarch rpm -q --file /usr/libexec/squeezeboxserver logitechmediaserver-7.8.0-0.9.20130404git1365073464.fc18.noarch mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
JackOfAll wrote: The arch specific binary perl is in the CPAN subpackage. Can you please. Code: rpm -q logitechmediaserver logitechmediaserver-CPAN logitechmediaserver-vendor Sure. Code: rpm -q logitechmediaserver logitechmediaserver-CPAN logitechmediaserver-vendor logitechmediaserver-7.8.0-0.9.20130404git1365073464.fc18.noarch logitechmediaserver-CPAN-7.8.0-0.1.20130303git1349179762.fc18.x86_64 logitechmediaserver-vendor-7.8.0-0.1.20130303git1349179762.fc18.x86_64 mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
JackOfAll wrote: Just drop back to the previous version for the moment until I have time to have a look at what causes the breakage in the most recent build. Code: sudo yum downgrade logitechmediaserver sudo systemctl start squeezeboxserver That works! Thanks! mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Can't run SBS-7.6 on Fedora 15
I'm running an older nightly (r32517) and it seems to work, mostly. There seem to be problems with the scanner. Newer versions don't even start. michaeljcarter;637937 Wrote: Running from the Nightly repo: [root@fuggles ~]# rpm -q squeezeboxserver squeezeboxserver-7.6.0-0.1.32552.noarch -- mkt mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=88478 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] fedora 14 / perl 5.12?
I upgraded from Fedora 12 to 14. Was 13 OK with squeezeboxcenter? -- mkt mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=83030 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] fedora 14 / perl 5.12?
I upgraded from fedora 12 to fedora 14 and get this messages when I try to start the server: Starting Squeezebox Server: Use of inherited AUTOLOAD for non-method YAML::Syck::DumpYAML() is deprecated at /usr/share/squeezeboxserver/CPAN/YAML/Syck.pm line 65. The following modules failed to load: EV XML::Parser::Expat JSON::XS YAML::Syck Sub::Name The perl is perl-5.12.2-136.fc14.i686. Any ideas? -- mkt mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=83030 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] fedora 14 / perl 5.12?
With squeezeboxserver-7.5.2-0.1.31477.noarch /etc/init.d/squeezeboxserver start Starting Squeezebox Server: Use of inherited AUTOLOAD for non-method YAML::Syck::DumpYAML() is deprecated at /usr/share/squeezeboxserver/CPAN/YAML/Syck.pm line 65. The following modules failed to load: EV XML::Parser::Expat JSON::XS YAML::Syck GD Sub::Name perl -V output attached +---+ |Filename: perl_V.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=10825| +---+ -- mkt mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=83030 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] fedora 14 / perl 5.12?
andyg;586639 Wrote: Hmm can you also post the output of: /usr/sbin/slimserver --d_startup There's no /usr/sbin/slimserver. Here's the output of /usr/libexec/squeezeboxserver --d_startup +---+ |Filename: squeezeboxserver_d_startup.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=10826| +---+ -- mkt mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=83030 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] fedora 14 / perl 5.12?
I used all my google-fu to find something that provides libssp with no success. For now, I'm playing with ssh'ing to the Touch and doing an nsf mount. http://forums.slimdevices.com/showthread.php?t=77604 And thinking about running a virtual machine, which I've never done with linux as the host. -- mkt mkt's Profile: http://forums.slimdevices.com/member.php?userid=14921 View this thread: http://forums.slimdevices.com/showthread.php?t=83030 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
