Re: [WISPA] RouterBoard 112
There is no default IP. You can use a null modem cable to plug into the serial port. Use Hyperterminal or putty to get into it. set the bit rate to 115200 and you should be able to put an IP on it from the command line. /ip address add address=x.x.x.x/x interface=ether1 If your having trouble with winbox make sure you have the latest version. You can get it from MT website. Be sure windows firewall is off and all other interfaces are disabled in your connection properties. Jim 314-565-6863 Blair Davis wrote: > Blair Davis wrote: > >> Anyone happen to know the Power Supply voltage for the old RouterBoard >> 112? Just got some of them and I can't find it on the RouterBoard >> ste Thanks. >> >> >> > Thanks all. > > So, now I've got them powered up, but the neighbor discovery in winbox > doesn't find them. > > So now I'm looking for the default IP for them... > > Thanks again... > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] RouterBoard 112
Blair Davis wrote: > Anyone happen to know the Power Supply voltage for the old RouterBoard > 112? Just got some of them and I can't find it on the RouterBoard > ste Thanks. > > Thanks all. So, now I've got them powered up, but the neighbor discovery in winbox doesn't find them. So now I'm looking for the default IP for them... Thanks again... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] RouterBoard 112
Blair, This is what was on the 112 spec sheet. Powering The board accepts 11..60 V DC from either power jack or Ethernet port: ? direct-input power jack J7 ・5.5mm outside and 2mm inside diameter, female, pin positive plug. ? PoE compliant with IEEE802.3af Power over Ethernet standard (except for no power over data lines is supported), which also accepts a wide range of non-standard input voltages. IEEE802.3af PoE controller is only operational starting from 22-24V DC, so the JP2 jumper should only be opened when powering from high-voltage standard compliant PoE injector. Note that the JP2 jumper position applies for both the power jack and PoE input. The maximal output of the power supply is normally 3.0A, but the efficiency is decreased on lower voltages, so it is about 2- 2.5A when powered from 12V DC. Here is the PDF spec sheet http://www.routerboard.com/pdf/rb110mA.pdf Mike Goicoechea -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Tuesday, July 01, 2008 1:33 PM To: WISPA General List Subject: [WISPA] RouterBoard 112 Anyone happen to know the Power Supply voltage for the old RouterBoard 112? Just got some of them and I can't find it on the RouterBoard ste Thanks. -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.4.3/1528 - Release Date: 7/1/2008 7:26 AM No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.4.3/1528 - Release Date: 7/1/2008 7:26 AM WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] RouterBoard 112
* Blair Davis wrote, On 7/1/2008 2:33 PM: > Anyone happen to know the Power Supply voltage for the old RouterBoard > 112? Just got some of them and I can't find it on the RouterBoard > ste Thanks. > > up to 48volts leon WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] RouterBoard 112
Anyone happen to know the Power Supply voltage for the old RouterBoard 112? Just got some of them and I can't find it on the RouterBoard ste Thanks. -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/