Blair, This is what was on the 112 spec sheet. Powering The board accepts 11..60 V DC from either power jack or Ethernet port: ? direct-input power jack J7 ・5.5mm outside and 2mm inside diameter, female, pin positive plug. ? PoE compliant with IEEE802.3af Power over Ethernet standard (except for no power over data lines is supported), which also accepts a wide range of non-standard input voltages. IEEE802.3af PoE controller is only operational starting from 22-24V DC, so the JP2 jumper should only be opened when powering from high-voltage standard compliant PoE injector. Note that the JP2 jumper position applies for both the power jack and PoE input. The maximal output of the power supply is normally 3.0A, but the efficiency is decreased on lower voltages, so it is about 2- 2.5A when powered from 12V DC.
Here is the PDF spec sheet http://www.routerboard.com/pdf/rb110mA.pdf Mike Goicoechea -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Tuesday, July 01, 2008 1:33 PM To: WISPA General List Subject: [WISPA] RouterBoard 112 Anyone happen to know the Power Supply voltage for the old RouterBoard 112? Just got some of them and I can't find it on the RouterBoard ste.... Thanks. -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.4.3/1528 - Release Date: 7/1/2008 7:26 AM No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.4.3/1528 - Release Date: 7/1/2008 7:26 AM -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/