Am Freitag, den 14. Februar 2003 um 10:49:03 Uhr (-0500) schrieb Paul Davis:
> i believe that this patch is in CVS, but i haven't checked. i assume
> the R'dam system is using the "latest" code?
Yes.
--
Orm
---
This SF.NET email is sponsored
>got this additional Info from R'dam for those interested.
>
>Wasn't the warm boot corrected with the old firmware?
no. it was connected with a bug in the driver that marcus fixed. on
little-endian platforms we failed to write a "terminating" byte to the
FIFO at the end of the firmware load.
i b
L PROTECTED]>
Subject: Re: [[EMAIL PROTECTED]: Re: [Alsa-devel] hdsp/firmware problem]
Hi,
After a cold boot the system should do a warm boot and everything works
fine. Just insmod'ing snd-hdsp after a cold boot does not work.
Simon de Bakker
\/01|)7 workgroup: http://www.void7.org
person
Maybe an unneccesary and stupid remark, but are you sure that the line out
will support headphones?
Maybe you should try it with a regular amp.
Gerard
>
> But I can't get any sound out of the box (use headphone in line out) and
> setting all channels to 30 in alsamixer.
> Probably because the
>It means he didn't use the rear outputs for checking but the line outs
>on the front of the Multifaceq which are muted even if alsamixers
>controls are up afaik.
FYI this (from modules.conf) will turn on line out monitoring by
default (all channels, unity gain):
options snd-hdsp snd_id="hdsp
On Fri, Feb 14, 2003 at 08:30:24AM -0500, Paul Davis wrote:
> >the driver/interface works. The guy in Rotterdam tried the line
> >outputs on the front (I realized that this might have been the reason
> >5 minutes after I posted my previous mail).
>
> can you clarify what you mean by this?
>
> >Si
Am Freitag, den 14. Februar 2003 um 08:30:24 Uhr (-0500) schrieb Paul Davis:
> >the driver/interface works. The guy in Rotterdam tried the line
> >outputs on the front (I realized that this might have been the reason
> >5 minutes after I posted my previous mail).
>
> can you clarify what you mean
>the driver/interface works. The guy in Rotterdam tried the line
>outputs on the front (I realized that this might have been the reason
>5 minutes after I posted my previous mail).
can you clarify what you mean by this?
>Since the hdsp code reports firmware load failure there still might be
>some
Hi,
the driver/interface works. The guy in Rotterdam tried the line
outputs on the front (I realized that this might have been the reason
5 minutes after I posted my previous mail).
Since the hdsp code reports firmware load failure there still might be
something wrong, but the Multiface plays sou
>the hdsp driver still seems to have problems with the new pci
>card. It's a little complicated for me to give exact information as
>the machine is in Rotterdam and I'm in Berlin. I got The following
>email from the sysadmin of the machine:
i have an hdsp-9652 here that i haven't installed yet. it
Hi,
the hdsp driver still seems to have problems with the new pci
card. It's a little complicated for me to give exact information as
the machine is in Rotterdam and I'm in Berlin. I got The following
email from the sysadmin of the machine:
> Hi Orm,
>
> The driver seems to load ok except it fai
11 matches
Mail list logo