, April 24, 2012 3:12 PM
Newsgroups: public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Re: Working with ENCRYPT() function...
**
But wait - are you trying to get the length of the output from the encrypt
function that you run within Remedy. If that is the case you can just run the
so use what
you need toss what you don't.
Mike
From: mlatha...@hotmail.com
To: arslist@arslist.org
Subject: RE: Working with ENCRYPT() function...
Date: Tue, 24 Apr 2012 14:17:39 -0400
Hey Joe - Here is some code I ran in Netbeans without error in order to test
the DES encryption to
byte[] utf8 = dcipher.doFinal(dec);
// create new string based on the specified charset
return new String(utf8, "UTF8");}catch (Exception
e) { } return null;}
}
END OF CODE
From: mlatha...@hotmail.com
To: arslist
Subject: Re: Working with ENCRYPT() function...
To: arslist@ARSLIST.ORG
**
Good to hear from you too Michael.. I’m back in the downtown area these
days – haven’t worked in this area since we last worked together at Nomura
about
7 years ago. Time flies eh? I’m about 2 or 3 blocks away from
chael Latham
Sent: Monday, April 23, 2012 9:48 AM
Newsgroups: public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Re: Working with ENCRYPT() function...
**
I have been good Joe. Just doing the usual Remedy consultant thing. And you?
I see you are an arslist superstar by looking at your
:06:38 -0400
From: jdso...@shyle.net
Subject: Re: Working with ENCRYPT() function...
To: arslist@ARSLIST.ORG
**
Yes I was interested in the character count as if I encrypted the input,
I’d need to consider enough room for storage. I was tempted to build a 254
character field to store it, but
: Working with ENCRYPT() function...
**
Hey Joe -
How have things been since Nomura - if you remember me from that project and
you are in fact the same Joe De'Souza.
To move along, encryption algorithms vary. If I am not mistaken Remedy ARS
uses DES block-cipher encryption in the EN
Also check out this stackoverflow.com question:
http://stackoverflow.com/questions/457193/length-of-encrypted-string
I think it may be relevant to your question in a general sense.
Date: Fri, 20 Apr 2012 13:48:37 -0400
From: jdso...@shyle.net
Subject: Working with ENCRYPT() function...
To
o back and forth with the
encryption/decryption.
By the way, why do you need to know the length of the output string? I am
assuming when you say length you mean character count or something similar.
Mike
Date: Fri, 20 Apr 2012 13:48:37 -0400
From: jdso...@shyle.net
Subject: Working with
Is there a known algorithm to calculate the length of the output results of
ENCRYPT based on the length of the input string and the encryption key
parameters?
I vaguely remember that the length is 120. Or is that only the length of the
encrypted value in Field 123?
Also how would one decrypt
10 matches
Mail list logo
