Hello,
Load wctdm with debug=1, i.e, add this line to /etc/modprobe.conf:
options wctdm debug=1
Then watch /var/log/messages (tail -f /var/log/messages will do it),
and check when you are getting the first polarity reversal, you should
get it before the first RING. If it happens that you get it
Hi !I have some issues, i don't know exactly if it's a busy detection issue.When i dial into the Asterisk box, and if i hang up before the Asterisk answers with the IVR Welcome message, the Asterisk goes on with the call. But, if i wait for the Asterisk to answer, and if i hang up, the Asterisk han
9 PM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] Hangup Issues on TDM40B FXO Australia
>
> Afternoon all,
>
> After doing some test on my asterisk box I can successfully receive
> calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network
>
>
on-Commercial Discussion'
Subject: RE: [Asterisk-Users] Hangup Issues on TDM40B FXO Australia
Hi,
I have 2 Asterisk servers in .pg and 2 in .au
In .pg I have had to configure them as if they were in .au and use LS
signaling.
I am using the latest Asterisk @ Home (1.0) and it is working well
I had a similar issue both with the X100P clones and TDM400.
Both were fixed by enabling AU zone and the busydetect functions. Don't
forget a full asterisk reload needs to take place after changing Zap conf
files, not just a soft-reload. Best way is to reboot the computer.
Mike
> I have a simila
reappeared.
These server are also NTP servers and DHCP servers
Regards,
T
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> [EMAIL PROTECTED]
> Sent: Monday, 23 May 2005 12:49 PM
> To: asterisk-users@lists.digium.com
> Subject: [A
I have a similar issue.
I have 2 pstn lines and a phone plugged into my tdm400.
If I make a call to the outside using the phone, and the pstn number is
engaged, and I hang up, the line is not freed. I have been restarting
asterisk to get my external line back.
This does not happen if I make t
Afternoon all,
After doing some test on my asterisk box I can successfully receive
calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network
Dial out from a sip phone is also not an issue, all calls connect and
terminate normally.
If I call the Asterisk PBX say from PSTN in Zap1-1